Shows / 3DPOD: Insight from 3D Printing Pros
3DPOD: Insight from 3D Printing Pros
Hosted by Joris Peels (3DPrint.com, Executive Editor) and Maxwell Bogue (3Doodler, Co-Founder & Investor), 3DPOD brings 3D printing & additive manufacturing news and insight, with straight talk from two bona fide 3D printing pros.
Episodes
- 3DPOD: Insight from 3D Printing Pros
3DPOD 201: Aerospace Manufacturing with Oluseun Taiwo, Solideon CEO
Oluseun Taiwo began working with Optomec's take on directed energy deposition (DED), LENS, as a student and later gained experience at Argonne National…
- 3DPOD: Insight from 3D Printing Pros
3DPOD 200: Joris and Max Wax Philosophic on Five Years of Podcasting
So, it has been 200 episodes of the 3DPOD! That is incredible! We really didn't think it would be this much fun and last this long. We've had incredible guests…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 199: Collaborative Design with Graham Bredemeyer, CEO of CADchat
About a decade ago, entrepreneur Graham Bredemeyer started Collider, a company that combined the best of 3D printing with injection molding. Now he runs…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 198: High Speed Sintering with Neil Hopkinson, VP of AM at Stratasys
Neil Hopkinson, a pioneering 3D printing researcher, played a pivotal role in developing a body of research that is widely utilized today. He also invented…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 197: Ceramics 3D Printing with Johannes Homa, Lithoz CEO
Lithoz is a pioneer in the 3D printing of technical ceramics, initially using a ceramic-loaded stereolithography process and later adopting multiple…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 196: Bioprinting and Biofabrication with Dietmar Hutmacher, Queensland University of Technology
Dietmar Hutmacher is a Professor and Chair in Regenerative Medicine at the Faculty of Engineering, School of Mechanical, Medical, and Process Engineering at…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 195: 3D Printing Wood, Coffee, and Seaweed with Andy Jeffery, Marvel Labs
Andy Jeffery is a long-time 3D printing veteran who has repeatedly introduced binder jetting technologies to new areas. Starting as one of the earliest…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 194: Product Design and the Additive Journey with PADT Hardware Director David Dietrich
David Dietrich's journey in 3D printing spans from materials engineering roles at Boeing and ORNL to his position as an engineering fellow at Honeywell…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 193: Flow and What’s Possible in 3D Printing with Ricky Wildman, University of Nottingham
Ricky Wildman is working on 3D printing pills, but, as Professor of Multiphase Flow and Physics at Nottingham, he does a whole lot more. His research…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 192: François Minec, Global Head of Polymer 3D Printing at HP
François Minec began his career in polymers as an engineer. He then progressed to roles as a product and general manager in several polymer companies…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 191: Amy Alexander, 3D Printing at the Mayo Clinic
Amy Alexander leads the 3D printing initiatives at the Mayo Clinic. You'll be astounded by the ambitious plans this hospital has for additive manufacturing. In…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 190: Generative Design for 3D Printing with Novineer CEO Ali Tamijani
Ali Tamijani, a professor in the Department of Aerospace Engineering at Embry-Riddle Aeronautical University, has an extensive background in composites, tool…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 189: AMUG President Shannon VanDeren
Shannon VanDeren is a consultant in the 3D printing industry, focusing on implementation and integration for her company, Layered Manufacturing and Consulting…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 188: Clare Difazio of E3D – Growing the Industry, and Growing With the Industry
Clare DiFazio's journey into the 3D printing industry was serendipitous, yet her involvement at critical moments has significantly influenced the sector. Her…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 187: Medical and Industrial 3D Printing with Jeremy Pullin, Head of AM at Sartorius Group
Jeremy Pullin, an additive manufacturing (AM) veteran with decades of experience, is currently at the leading medical firm, Sartorius Group. He has been…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 186: Micro DLP 3D Printing with John Kawola, CEO of BMF3D
John Kawola was one of the initial employees at Zcorp, a pioneering 3D printing company known for manufacturing color parts that was eventually acquired by 3D…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 185: Stefan Ritt and the International 3D Printing Business Perspective
Stefan Ritt, a expert in 3D printing veteran, has contributed significantly to numerous additive manufacturing committees and standardization initiatives. For…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 184: Specialty Additive Metal Solutions with Chris Prue, United Performance Metals
Chris Prue, who initially honed his skills in the Quality department at GE, later transitioned to GE Aviation, where he ascended to the role of Additive and…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 183: Greg Morris, Zeda CTO
Greg Morris, CTO of advanced manufacturing provider Zeda Technologies, is a true industry leader in 3D printing. Decades back, he made his initial family…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 182: 3D Printing Sustainability with Sherri Monroe, AMGTA
Sherri Monroe is the Executive Director of the Additive Manufacturer Green Trade Association (AMGTA). There's a growing curiosity about the environmental…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 181: 3D Printing Market Strategy with Hans-Alfred Breuninger
Hans-Alfred Breuninger, with a background as a strategy consultant, has specialized in 3D printing after many years in his initial field. He has collaborated…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 180: 3D Printing Services with Oscar Klassen, JawsTec CEO
Nestled beside a potato field, JawsTec's location may not raise eyebrows in the state known for its spuds, but the competitive spirit of the 3D printing…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 179: Molten Metal Additive Manufacturing with Jonas Galle, ValCUN
Seven years ago, Jonas Galle began his journey to develop a molten metal 3D printing technology. Since then, his young startup, ValCUN, has been on a wild ride…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 178: Low Cost Metal 3D Printing with Juan Mario Gomez, Xact Metal CEO
After a lengthy tenure at GE, Juan Mario Gomez took an unexpected turn, launching a metal 3D printing venture, Xact Metal. In this episode of the 3DPOD, he…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 177: 3D Printing at Point-of-Care with Gabe Linke, Children’s Hospital & Medical Center
Gabe Linke serves as a technical specialist at Children's Nebraska hospital, where he plays a pivotal role as a bridge between conceptual ideas and their…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 176: 3D Printing in Singapore with Chaw Sing Ho, CEO of NAMIC
As CEO, Chaw Sing Ho spearheads National Additive Manufacturing Innovation Cluster (NAMIC), Singapore's national initiative for 3D printing. In our in-depth…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 175: 3D Printed Cartilage Implants with Ben Holmes, Nanochon CEO
Ben Holmes shares his venture into developing a potentially game-changing medical device technology. His company, Nanochon, aims to alleviate cartilage…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 174: 3D Printed Shoes with Elias Stahl, HILOS Founder & CEO
Elias Stahl believes that his startup, HILOS, has the potential to transform the manufacturing industry. Starting with 3D printed shoes, he aims to integrate…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 173: Construction 3D Printing with Philip Lund-Nielsen, COBOD
Philip Lund-Nielsen entered the world of desktop 3D printing as a co-founder of a Danish reseller. Impressively, that reseller underwent a significant…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 172: Flexible 3D Printing with Richard Hague, University of Nottingham & Reactive Fusion
Richard Hague, a pioneering researcher in the realm of additive manufacturing, now holds a position at the University of Nottingham. Besides his academic…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 171: 3D Printing in the Military and Digital Supply Chains with Col. James Allen Regenor, VeriTX
Colonel James Allen Regenor had a distinguished career, flying tankers and transport aircraft for the U.S. Air Force before serving under President Bush and…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 170 — From Automobiles to Education: 3D Printing with Steve Cox, Amfori
After decades of engineering and leading teams at Jaguar Land Rover, Steve Cox made an unexpected career shift to focus on 3D printing education through his…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 169: 3D Printing for Hackers and DIY with Mitch Altman
Mitch Altman, a pioneer in the fields of field-programmable gate arrays and virtual reality, has long been a leading figure in the maker community. Not only…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 168: Reselling 3D Printers in Japan, Korea and the USA with Douglas Krone, Brule and Dynamism
Douglas Krone co-founded Dynamism, a reseller specializing in a range of 3D printers, from desktop to industrial models, for the U.S. market. This successful…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 167: 3D Printed Foam Casting with Sarah Jordan, CEO of Skuld
Sarah Jordan, a seasoned expert in casting, forging, and metallurgy, is channeling her extensive knowledge into an innovative 3D printing technique with which…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 166: 3D Printed Shoes and the Big Pictures with Nicoline van Enter, CEO of Footwearology
Nicoline van Enter, a seasoned figure in the realms of footwear and trend forecasting, has taken her expertise to Footwearology, where she leads training and…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 165: A Look at the 3D Printing Industry with Kerry Stevenson, Fabbaloo
Kerry Stevenson was a CTO in the Insurance industry until he turned his focus to 3D printing and started a blog called Fabbaloo. Since 2007, Kerry has offered…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 164: Standards, Space, and Engineering with Tyler LeBrun, AM Lead at Sandia National Labs
In this episode of the 3DPOD, we speak to Tyler LeBrun. Currently serving as Additive Manufacturing Lead at Sandia National Laboratories, LeBrun previously…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 163: 3D Printing Polymer Deep Dive with Max Heres, CEO of Loci Robotics
In this episode of the 3DPOD, we once again welcomed Max Heres, who elaborated further on his large format material extrusion company, Loci Robotics. We delved…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 162: Micro 3D Printing with Adam Steege and Scott Schiller, Trio Labs
Trio Labs is quietly revolutionizing the field of small metal parts with its high-volume, accurate metal 3D printing technology. Since 2017, the company has…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 161: Automated Wire Harness Manufacturing with Stephen Bennington, CEO of Q5D
Found in 3D printers, busses, airplanes, cars and a lot of electronics worldwide, wire harnesses are often made by hand, a country or two over from where the…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 160: Inkjet 3D Printing with Gareth Neal, Business Development Manager at Xaar
In this episode of the 3DPOD, we talk to Gareth Neal, Business Development Manager EMEA + Israel for Xaar. The British firm manufactures inkjet printheads and…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 159: Construction 3D Printing with Natalie Wadley, CEO of ChangeMaker 3D
Natalie Wadley started a 3D printing construction business with her husband. Rather than sell material or 3D printers ChangeMaker3D is an integrator that…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 158: 3D Printing Jobs with Nick Pearce, Director of Alexander Daniels Global
Nick Pearce is a recruiter who helped start Alexander Daniels Global, a firm specialized in headhunting for the Additive Manufacturing industry. As the…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 157: Industrial Metal 3D Printing with Zach Detweiler, VP of Technology at Velo3D
In this episode of the 3DPOD, we talk with Zach Detweiler, vice president of Technology at Velo3D (NYSE: VLD), about his past as a chemist and the path that…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 156: AMUG President, Mark Abshire
Mark Abshire has had a very long history in 3D printing. Beginning as a Rapid Prototyping manager at Texas Instruments, he was one of the first users of…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 155: 3D Printed Medical Devices with Anatomics Founder Paul D’Urso
Paul D’Urso is a pioneering surgeon and entrepreneur. As founder of Anatomics, he's been an instrumental figure in developing 3D printed implants of all kinds…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 154: Duann Scott on MIT’s xPRO 3D Printing Course and More
Previous guest Duann Scott is back to discuss some new ventures and projects he's involved with, including MIT's xPRO course on additive. What is covered, what…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 153: 3D Printing Success with 3Doodler Inventor Max Bogue
Today we interview Max Bogue, co-host of the 3DPOD. He tells us how he went from the genesis of the idea for a 3D printing pen to creating the product to…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 152: Binder Jetting Flexible Materials with Chris Tuck, Reactive Fusion Founder
Chris Tuck is an entrepreneur and Nottingham University professor playing an outsized role in commercializing and researching new 3D printing technologies…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 151: Large Format Polymer 3D Printing with Max Heres, Loci Robotics
Before starting Loci Robotics, Max Heres had a storied history beginning with the study of polymer physics before working as a graduate research assistant at…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 150: 3D Printing Qualification with Humna Khan, Founder of ASTRO Mechanical Testing Lab
Hunma Khan founded Astro Mechanical Testing Lab to create a testing and qualification lab specific to Additive Manufacturing. Her customers are most of the…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 149: 3D Printed Consumer Goods with Ian Yang, Gantri Founder
Ian Yang is the founder of Gantri, a startup which uses desktop 3D printers to make lamps. We love Gantri because it deploys 3D printing for consumer products…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 148: Frank Herzog, HZG Group
Frank Herzog, alongside his wife, commercialized Concept Laser. The firm was later sold to GE to become the core of GE Additive, and Frank stuck around to…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 147: Solid State Metal 3D Printing with Tim Bell, COO of MELD
Meld is one of the most exciting metal 3D printing startups out there. Its additive friction stir deposition is a solid-state process that can print very large…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 146: Machine Learning and 3D Printing with Ben Schrauwen, Oqton SVP
Ben Schrauwen was a Professor of Machine Learning who also had a few startups under his belt when joined Autodesk and worked on the CAD giant's 3D printing…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 145: Scott Volk, Advanced Additive Innovations
Scott Volk has deep experience in additive and, over the decades, he's stood at the forefront of polymer and metal implementations, working for such firms as…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 144: High Volume Carbon Fiber 3D Printing with 9T Labs CEO Martin Eichenhofer
Martin Eichenhofer took his research from ETH Zurich and turned it into an exciting startup, 9T Labs, which hopes to make its two step carbon fiber 3D printing…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 143: Thermally Conductive Polymer 3D Printing with TCPoly CEO Matthew Smith
Matt Smith started his firm TCPoly while he was a researcher at the Georgia Institute of Technology. He parlayed this small business into manufacturing…
- 3DPOD: Insight from 3D Printing Pros
3DPOD Episode 142: Ole von Seelen, trinckle 3D
As Head of Business Development, Marketing and Sales, Ole von Seelen has been helping trinckle 3D grow in the 3D printing space for years now. Starting out as…