Latest / 5 Minute UX / Deciding What Parts of a System to Prototype
Transcript
- 0:08This lesson is Deciding What Parts of a System to Prototype.
- 0:12Let's get started.
- 0:20You never prototype an entire app, product, website, or every
- 0:23single step in a process because that approach wastes resources.
- 0:26Instead, you use a representative sampling of the
- 0:28application to simulate only the key parts and interactions
- 0:31relevant to your test. This core principle of representative
- 0:34sampling versus full system simulation ensures you focus on
- 0:36what actually matters for validation. By isolating
- 0:39specific elements, you avoid the trap of creating a comprehensive
- 0:42simulation of the entire system that adds no value. The reason
- 0:44this works is that you are testing a handful of hypotheses
- 0:47and concepts, not building a final product. When you restrict
- 0:50the scope to these specific areas, the prototype becomes a
- 0:53precise tool for gathering actionable feedback rather than
- 0:55a decorative artifact. You identify which parts of the
- 0:58system need verification and leave the rest alone, keeping
- 1:00the effort proportional to the insight gained. This selective
- 1:03approach allows you to evaluate viability without getting bogged
- 1:06down in unnecessary development work. Once you have established
- 1:09this representative sampling strategy, you can begin defining
- 1:12the exact scope through your specific hypotheses and cost
- 1:14considerations.
- 1:21You define scope by including only the specific hypotheses and
- 1:24concepts you intend to test, rather than simulating the
- 1:27entire system. This focus prevents scope creep and keeps
- 1:29the prototype aligned with your learning goals. Because you are
- 1:32testing specific ideas, the artifact should reflect those
- 1:35targeted interactions exclusively. When building
- 1:37these targeted tests, you must evaluate cost viability if
- 1:40development exceeds time-and- materials expectations. Portions
- 1:42of an application can be prototyped to determine if the
- 1:45full functionality is cost- effective before committing
- 1:47resources. If the effort required to build a feature
- 1:50becomes a concern, you should pause and assess the project's
- 1:53viability. This approach ensures you are not wasting time
- 1:55on unnecessary details. By limiting the prototype to key
- 1:58parts, you maintain efficiency and clarity. Once you have
- 2:00defined these boundaries, you can select the appropriate
- 2:03materials and methods for construction.
- 2:12You apply decision criteria to select between low-fidelity and
- 2:15high-fidelity tools based on cost and interaction needs.
- 2:17Start with whiteboarding, pencil-and-paper sketching, or
- 2:20storyboarding for early concepts. These methods keep the
- 2:23focus on structure rather than decoration. As you refine ideas,
- 2:26use cardboard cut-outs or simple PDFs for tangible or static
- 2:29interaction checks. This allows stakeholders to handle the flow
- 2:32physically. When you need interactive prototypes and more
- 2:35realistic environments, switch to digital tools. You can build
- 2:38HTML prototypes via Dreamweaver, RapidWeaver, or Visual Studio
- 2:41for browser-accurate testing. Using Live View in Dreamweaver
- 2:44ensures Apple’s Safari and Google’s Chrome browsers render
- 2:47correctly. This progression prevents over-investing in
- 2:50visuals before validating the core experience.
- 2:59You build screens and sometimes fake functionality, treating the
- 3:02prototype as part of the process rather than the final result.
- 3:05When you engage test users, you need accuracy, so using Live
- 3:08View in Dreamweaver ensures exactly what appears in Apple’s
- 3:10Safari and Google’s Chrome browsers. This meticulous
- 3:13attention to detail matters because you’re gathering
- 3:15feedback to obtain actionable internal or external insights
- 3:18from your concepts. The goal isn’t a perfect artifact but
- 3:21rather useful data that drives the next step in your design
- 3:23evolution. Once you’ve tested, you synthesize results and turn
- 3:26them into something actionable for the team. If you started
- 3:29with paper prototyping, you begin creating digital
- 3:31wireframes based on that feedback, whereas if you were
- 3:34already in digital mode, you update the wireframes and
- 3:36proceed. You might also present prototypes to work partners to
- 3:39share your work and align on direction. This cycle of
- 3:42creating, testing, gathering feedback, and synthesizing
- 3:44results keeps the project moving forward without getting stuck.
- 3:47Consider which step in this four-step process you find most
- 3:50challenging when applying decision criteria to select
- 3:52tools. Do you struggle more with building the initial screens or
- 3:55with synthesizing the feedback once the testing is complete?
- 3:58Reflecting on where the friction lies helps you adjust your
- 4:01approach for future projects and ensures you stay focused on the
- 4:04core principle of representative sampling.
- 4:12You’ll often face the pitfall of stakeholders assuming your
- 4:14prototype is the final graphical treatment, so explicitly clarify
- 4:17that wireframes show content, general layout, and interaction
- 4:20only, not polished visuals. Even when using design systems that
- 4:23yield nearly pixel-perfect results, you must state that
- 4:25items will adjust during development to manage
- 4:27expectations effectively. Another common trap is treating
- 4:30the prototype as a static artifact rather than a dynamic
- 4:33process, which means you should remember that screens and fake
- 4:35functionality are merely steps toward gathering actionable
- 4:38feedback. The true end result isn’t the file itself but the
- 4:41insights you synthesize to enhance and improve the actual
- 4:43design. Finally, avoid the error of continuing to prototype past
- 4:46the point of maximum effectiveness, because refining
- 4:48details further yields diminishing returns on your time
- 4:51and resources. Recognizing when you’ve reached that peak allows
- 4:54you to stop building and start acting on the data you’ve
- 4:56collected. By applying these recoveries, you transform
- 4:59prototyping from a production task into a strategic learning
- 5:02tool that validates hypotheses without simulating the entire
- 5:04system.
- 5:08Welcome to The Take. I'm joined by a fellow practitioner and
- 5:10together we're going to dig into Deciding What Parts of a System
- 5:14to Prototype — what it means in practice and what's worth
- 5:16remembering.
- 5:18[HOST] I keep thinking about that distinction between
- 5:21simulating the whole system versus just sampling the
- 5:23critical path. It feels counterintuitive to leave gaps,
- 5:26but necessary. [LEARNER] Exactly. The moment you try to
- 5:29build the login flow for a checkout test, you’ve already
- 5:32lost. You’re solving the wrong problem. [HOST] Right. And
- 5:35that’s where the cost viability check becomes a hard stop. If
- 5:38the prototype gets too expensive, the hypothesis wasn’t
- 5:41worth testing that way. [LEARNER] That’s the brutal
- 5:44part. I’ve seen teams spend weeks pixel-perfecting a feature
- 5:47that users barely noticed. We confuse effort with value.
- 5:50[HOST] It’s a trap. But using AI to generate those static screens
- 5:53now changes the economics entirely. You can mock up twenty
- 5:56variations in minutes. [LEARNER] True. The barrier to entry for
- 5:59high-fidelity visuals has vanished. But does that make us
- 6:02lazy about defining the scope first? [HOST] It risks it. If
- 6:05you can generate everything easily, you might be tempted to
- 6:09simulate everything. That defeats the purpose of
- 6:11representative sampling. [LEARNER] So the discipline
- 6:14shifts from construction to curation. You have to be
- 6:16ruthless about what you choose to show, not just how you show
- 6:20it. [HOST] Precisely. The tool doesn’t decide the scope. Your
- 6:23hypotheses do. The AI just speeds up the wrong path if you
- 6:26aren’t careful. [LEARNER] I need to remember that. It’s easy to
- 6:29let the tech drive the process instead of the learning goals.
- 6:32[HOST] Keep that in mind. The prototype is a question, not an
- 6:35answer. Don’t build the answer before you’ve asked the right
- 6:39one.