INOYDA - RP2040 with DVI output first output test
Our first Feather 'bones' board prototype is ready for testing! This is RP2040 with 8MB Flash, QT, USB C, Lipoly and the standard Feather pinout ... and at the other end a DVI connector that will work with any HDMI monitor or 'sink'! We tested that we can detect and read the sink's EDID EEPROM, the HPD (hot-plug detect) pin goes high when connected, and that we can generate both 640x480 and 800x480. Those are generated in the PicoDVI Arduino library (https://github.com/adafruit/PicoDVI) we have as pixel-doubled 320x240 or 400x240 so we have a full framebuffer in RAM that we can instantly…
The skinny
The skinny isn't ready yet — notes appear once the transcript is processed.