Latest / FOILERS / Omen Foils (Part 1): Rethinking Foiling Gear Design For Passionate Foilers With Greg Falck
Transcript
- 0:06Hi, I'm Pete Walmsley and welcome to the Foilers podcast.
- 0:10Today I'm joined by Greg from Oman Foils.
- 0:13Now, Greg's been putting out some awesome content around foil
- 0:16tuning, so with that in mind, we're going to spend some time
- 0:19unpacking that, looking at what riders should be changing, what
- 0:22they should probably leave alone, and some of the common
- 0:25misperceptions surrounding setup and feel.
- 0:28We're also going to talk about the design philosophies behind
- 0:31Oman's board and foil range. So Greg, really looking forward
- 0:36to this conversation. Welcome to the Foilers podcast.
- 0:39Yeah, Pete, thanks for having me on, man.
- 0:41Absolute pleasure. So let's let's kick off with a
- 0:44little bit about your background.
- 0:45What were you doing prior to Omen Foil?
- 0:48I was working for a Lula, which is a composites textile company
- 0:52that's kind of now synonymous with high performance fabrics
- 0:56and and kiting and winging. And did you study anything in
- 1:00particular or you jumped straight from school into
- 1:02working in that area? If you go back a few steps, what
- 1:05was? Yeah, I was.
- 1:07I was. I took mechanical engineering in
- 1:08school that was basically funded by the taxpayer thanks to
- 1:12signing on the dotted line to do a program called ROTP, which is
- 1:17you the basic the military pays for your civilian education at a
- 1:21university in exchange for for five years of service as an
- 1:24officer afterwards. So I did a little bit longer
- 1:28than that in the military because I was enjoying it and
- 1:31then thought I'd try something new.
- 1:33And I was super interested in win sports, particularly kiting
- 1:37at the time, and kite foiling actually.
- 1:39So yeah, I wound up on Vancouver Island and basically through a
- 1:43connection at Ocean Rodeo, they interviewed me for a position
- 1:47because they they had this kind of initial concept for this this
- 1:52high performance fabric and it was kind of in their in the
- 1:55basement type setup. And yeah, so yeah, they
- 1:58basically hired me and decided, yeah, we want to make this a
- 2:00real project. We're getting some some
- 2:02interesting results at basically lab scale.
- 2:05So I took that project over and eventually Ocean Rodeo spun out
- 2:11my second company with very similar ownership, but it was a
- 2:14another corporate entity which was called the Lulu Composites.
- 2:17And that today is now, you know, certainly in in tight swings and
- 2:22and all sorts of other industries.
- 2:24Yeah. Yeah, absolutely.
- 2:26It's AB certainly, certainly taken off as a light fabric of
- 2:30choice as we've gone lighter with a lot of materials.
- 2:33So the question a lot of people will be wondering is there's
- 2:36lots of companies out there in this space, lots of foiling
- 2:39brands, etcetera. How did Diamond Foils originally
- 2:43come about? Was the gap or opportunity you
- 2:45felt that was missing in the market at the time?
- 2:48Yeah, well, I was just super in into foiling and and because of
- 2:52my position with Ocean Rodeo and Lulu, I had this kind of view
- 2:55into the industry and and access to to a lot of different
- 2:58equipment as it's as it's coming out.
- 3:00And I felt black what I was lacking and foiling.
- 3:04And at the time I think it was it was really prone foiling and
- 3:07just getting into winging. But my obsession was really
- 3:10prone foiling at the time. And what I thought in the
- 3:13industry, what I thought they did very well was do kind of pro
- 3:17level equipment for the like highest caliber riders and then
- 3:21beginner equipment because of course, as a big brand that's
- 3:23you're moving, that's focused on selling through shops, there's a
- 3:26lot of beginners coming in and just loading up with a full
- 3:29beginner kit. So, but what I felt was lacking
- 3:31was kind of like position that that I'm in and, and I see a lot
- 3:34of the people that I spend time with on the beach is that kind
- 3:38of advanced intermediate, somebody that spends a lot of
- 3:41time on the water, takes the sport very seriously.
- 3:44They're nowhere near quitting their day job.
- 3:46They're not going to become a professional, but they demand a
- 3:49high degree of quality and precision from their equipment
- 3:52and, and performance in that. And when I say performance,
- 3:55that's a really broad term. It's very different the type of
- 3:58performance you might want, as you know, 35 to 55 year old guy
- 4:04that is foiling on a weekend has a decent level of fitness and is
- 4:07super into sport compared to somebody who's 22 and has two
- 4:10sessions a day in Maui, you know, 300 days a year.
- 4:13It's just that is what you want from your equipment, what you
- 4:16need from your equipment is different than.
- 4:17I'm not saying there's one universal rule that that would
- 4:20change that, but it's it's just, it's a bit of an adjustment in
- 4:24the design philosophy, I think. And were you designing for any
- 4:28particular discipline of foiling?
- 4:31I mean you talk about that for that middle between pro and
- 4:34beginner and I think you make a really good point about that in
- 4:37terms of the space that a lot of brands are at.
- 4:40But in terms of what you were designing for, was there a
- 4:43discipline in mind or was it a cross disciplines for foiling as
- 4:47well? It was cross discipline right,
- 4:49right from the get go because as like my initial obsession with
- 4:52was prone foiling. And that's I think was kind of
- 4:56the early days of when I was identifying this this market gap
- 5:00because I thought kite foils were actually done pretty well.
- 5:03And, and frankly, I think like, aside from racing for like the
- 5:06free ride, which is what I was interested in, I think you can
- 5:09always tune something, make it feel a little bit better.
- 5:12But I actually think like kite foils pretty early felt pretty
- 5:15good. But prone foiling was where it's
- 5:17like, I know we can connect more waves.
- 5:19I know we can that that shift between you go higher aspect and
- 5:23bigger and you lose turning ability.
- 5:25And then similarly, you, you go smaller and you, you lose pump
- 5:29and glide and with lower aspect ratio.
- 5:31So with that, and then it was really, by the time this kind of
- 5:35really kicked off and it started, it was certainly
- 5:38winging and it was seeing the potential of going downwind with
- 5:41a wing and, and having that be able to flag out compared to
- 5:45what you can do on a kite foil where you're always managing,
- 5:48even with a really good drifting kite, you're always managing
- 5:51that kite. So you're, you're not truly
- 5:53riding the wave energy. You're kind of making it look
- 5:55like you're riding the wave in a really skilled kite foiler, but
- 5:58it's not the same as somebody who's who's winging or or pair
- 6:02winging or or prone foiling. So there's sort of more focus,
- 6:05more dependence on the performance of the foil itself
- 6:08in in those those situations. Yeah, and, and in fact, I
- 6:13totally, and I think with kite foiling, you'd have to talk to
- 6:16somebody who's like expert able. But I almost think if you have
- 6:19too high performance of a foil and you're trying to wade, ride
- 6:22waves with kite foiling, you can just you'll just outrun them
- 6:25because you're being pulled by your kite and you have this
- 6:27slippery small foil. You can just get pulled right
- 6:30off the wave because you can't make the same angles you can
- 6:32when you don't have the kite. It really limits where you can
- 6:35go. Yeah.
- 6:37So. So anyway, we're not chasing the
- 6:38same thing. The kite foils I think and in
- 6:41terms of your approach and we'll, we'll go through some of
- 6:43the products and obviously as I said, we're going to talk about
- 6:46some tuning considerations as well.
- 6:47But in terms of your approach, you know, I see 2 ends.
- 6:51There's quite this engineering approach and then at one end and
- 6:55then there's a rider feel at the other end.
- 6:57And some brands are very engineering orientated, they do
- 7:00testing with riders, but they're very engineering, very precision
- 7:03based and others are are much more leaning to the rider.
- 7:06Where do you sit in your approach to designing your foil
- 7:10range? I think it's heavily, heavily on
- 7:14the engineering side and analysis side.
- 7:17And then we build it and figure out where we fucked up and where
- 7:20we where we, where we assume something and we got it wrong.
- 7:23And then so we of course, it's like, and I think our I'd like
- 7:26to think with omen our, our design process.
- 7:29I mean, it's good and a bad thing.
- 7:30We take more cycles, so we're not not trying to make any
- 7:33deadlines. There's nobody looking over my
- 7:35shoulder saying when is the 2026 stuff going to be ready?
- 7:38So I'm pretty comfortable with doing that on repeat.
- 7:41So I'm going super deep and I kind of having an idea of like
- 7:44this is the problem we're trying to solve.
- 7:46We have all these computational tools and analysis to try to
- 7:49solve it. And then we think we've got a
- 7:51solution, let's build it and ride it.
- 7:54And where were we wrong? So that's a lot of feel.
- 7:58It's, it's, it's certainly some data and measurement.
- 8:00But for me, I'm actually much more concerned in that stage.
- 8:03I'm a lot less analytical when it comes to testing and more
- 8:07both like, you know, you can't, it's not like you can go for one
- 8:10prone session. Like wow, I connected 10 waves
- 8:12instead of 4. But if you, if you do that a few
- 8:15times, that's much more important to me than if I'm
- 8:18measuring the Jeep, like looking at AGPS and saying, here's my
- 8:21stall speed, here's this. It's like, what can I do with
- 8:23this foil that I couldn't do? And you switch back and forth
- 8:26and through a few few times using it, it becomes pretty
- 8:29clear. And certainly if you messed up
- 8:31and you've done something wrong, that's even more clear like
- 8:35that. I often tell people and joke
- 8:36about with people that would use our gear or try it.
- 8:39It's like the best test is when you use it and then you go back
- 8:43to something that's not as good or with anything.
- 8:46It's like you really noticed that.
- 8:48It's like the best test is when you go back to something else.
- 8:51So, so I think that's kind of where I find out the most is
- 8:55when you find out if I try something that's not working.
- 8:58And I think we're pretty much any, I think most of the
- 9:03innovations I think I've, I've come across through through Omen
- 9:06and the team and everybody that that contributes is when we've
- 9:09got something really wrong and we've played, we've tried to
- 9:12put, we say, hey, maybe this does this.
- 9:14And then we're, we've really pushed that to 10 and sometimes
- 9:18it's like, wow, this worked great.
- 9:20But then you still don't really know because usually you're
- 9:22changing a few variables. But when you, when you really
- 9:25crank a dial up to 10 and it has a disastrous result and it
- 9:29causes you to completely have to rebuild your perspective on how
- 9:33things work and how fluid is flowing over this in different
- 9:36scenarios or even just what what's happening under the hood,
- 9:40I guess so to speak. That I think is where we've kind
- 9:44of like built some new understandings and, and had some
- 9:46genuine innovation. So so I guess to answer your
- 9:48question in a rambling pedantic way.
- 9:51It's both. But not really so much at the
- 9:54same time. 1-1 process feeds the other.
- 9:56And in terms of your range, you look at companies, there seems
- 10:00to be a lot of companies going really broad with their product
- 10:03range and there seems to be some pressure to do that.
- 10:06I'm not seeing that as much with the old brand, whether it's a
- 10:09time thing or a process thing or a philosophy.
- 10:14So you know, fill us in a bit on that.
- 10:16What's your thinking on on the range that you're going to do or
- 10:19have now and going to do in moving forward with the brand?
- 10:24I also think that's that's a complicated answer to a simple
- 10:27question in that there's a few reasons, some of which are
- 10:30externally imposed and some of which are just selfish.
- 10:33One is like what I like, yeah, what I like to do is I just want
- 10:37to build stuff for myself. And if in some ways if if omens
- 10:41could earn me a living and I could only make one size of
- 10:43board and one size of foil, one size of masks, like that'd be
- 10:47sweet reality that that isn't the case.
- 10:49And we need to have different sizes for different size riders.
- 10:53And ostensibly we could have different styles of all
- 10:56different styles of boards and foils for all different styles
- 10:58of riders. But the the limitation on open
- 11:02compared to other companies that are larger and more established
- 11:04is just where resource constrained in terms of
- 11:07development. So I would consider it spreading
- 11:09us too thin. And if we're spread really thin,
- 11:12trying to do multiple disciplines and all this kind of
- 11:14stuff, it's just going to lead to worse result.
- 11:16And then quite honestly, probably a worse result than a
- 11:19lot of our our competition who who are super into this stuff as
- 11:22well. So in I think there's to kind of
- 11:26hark back to to hark to do a military reference.
- 11:28One of the things you learn as an officer is that the idea of
- 11:31an honorable fight is stupid idea and you should try to be
- 11:36dishonest and cruel and whatever, whatever you have at
- 11:39your disposal, you bring that to the fight, right?
- 11:41You know, if you don't, a good officer, good general, like I'm
- 11:44not, wasn't an infantry like combat arms officer.
- 11:47But certainly you're exposed to all this kind of thinking in the
- 11:49military. It's like you're not trying to
- 11:51send 10 guys to fight 10 guys. You're trying to send 100 guys
- 11:57to fight 10 guys and give those guys air support and tanks and
- 12:01artillery and night vision. And if you have night vision and
- 12:04they don't, you do it at night. Like you're just every possible
- 12:08advantage. You can stack the deck.
- 12:10You're trying to do that. And I consider that a pretty
- 12:13intense advantage if if Oman is only competing in one specific
- 12:19space and everything we can possibly do and everything we
- 12:21possibly learn is focused on that niche.
- 12:24That's how I think we're going to want establish a reputation
- 12:27in that space and to just make better equipment for that space.
- 12:30And that's, that's, that's the goal.
- 12:32And then I guess that's kind of the pathway that I see.
- 12:35It's practical And, and frankly, that's not our starting point.
- 12:39For me, that's the end point as well as the start.
- 12:42I don't have a desire to be making freestyle equipment and
- 12:46racing equipment and all this kind of stuff.
- 12:48I and I think, you know, in some ways it would be like that is a
- 12:53luxury to be involved in that type of thinking because
- 12:56certainly you can glean things from going really extreme and
- 13:00say racing and bring that into wave, which is my passion.
- 13:03So I certainly try to like pay attention to those spaces.
- 13:07But yeah, the advantage is not having to focus that, not having
- 13:10to put out something every year and in something that I'm less
- 13:13interested in, I could stay focused on on what I want to do.
- 13:17And and it's easy to do that because I'm a selfish creature
- 13:20and I, I am completely obsessed with with the wave riding aspect
- 13:24of that. Hi Foilers, I just wanted to
- 13:28take a quick break to let you know about something new from
- 13:32our sponsors, Lip Sunglasses, who specialize in water sports
- 13:36eyewear. They've just launched a new
- 13:38model called The Tide. They're designed for women who
- 13:41love their water sports and want to spend more time out there
- 13:45without the glare while also protecting their eyes from UV
- 13:48damage. Yep, perfect for those long
- 13:51downwind runs. The Tide comes with a lip
- 13:54trademark double stage retainer system so you can't lose them
- 13:57when you're out in the water. Plus the lenses come with
- 14:00hydrophobic coatings so the water just slides off.
- 14:04Anti fog coatings are also available and you can get
- 14:07polarized, non polarized photochromic and prescription
- 14:11lenses as well so you're well covered for any situation.
- 14:15Do your eyes a favour and check them out.
- 14:18Now back to the episode. Can you talk us through your
- 14:22board range and the design philosophies behind them?
- 14:25So to kind of get the easy ones out of the way, there's a tow
- 14:29board, which is for tow foiling. I would say that the design of
- 14:32that board is identical to a kite foil board other than the
- 14:36construction would is different. So in both a toe foil board and
- 14:40a kite foil board, you want that that board to like sink deep.
- 14:44I actually think that's for both of those lower volume is
- 14:47actually easier. Contrary pretty much all of our
- 14:49other foiling disciplines, the lower volume you can get that
- 14:52board, the easier it is to use just because it's it's harder
- 14:54with a floaty board and a sinky foil to actually get up onto it.
- 14:59So you want it to sink deep and you want it to rise up through
- 15:02the water. So you want to have a good like
- 15:04planning surface to to create lift as it starts moving.
- 15:08And then when you're in the air, you want to be as close as
- 15:12possible to the foil for more control.
- 15:15You want to have touchdown performance as good as you can
- 15:18straight down without lifting your front foot.
- 15:21So that's one of the things pay a lot of attention to it all.
- 15:24All the boards is, is the location of the front versus
- 15:27back foot corresponding to the angle of the base plate.
- 15:29So when that's wrong, that can really affect how your how your
- 15:33foil behaves. That's why base plate Shim, a 1°
- 15:36base plate Shim can do so much for you good and bad as a tuning
- 15:41piece after which we can get into later.
- 15:42But anyway, you want to have that touchdown control.
- 15:46So that's part part of the battle with a with a TOEFL board
- 15:49is getting that really aggressive nose scoop and the
- 15:51right shape of nose scoop without lifting the front foot,
- 15:55which can make it uncomfortable and manifest as front foot
- 15:58pressure, even though it's more just a bad ergonomics.
- 16:00So yeah, and then and then I think I mentioned touchdown
- 16:03control. So that's what the TOEFL board
- 16:06is. And again with a kite flow
- 16:07board, you're kind of doing the same thing.
- 16:09You're just going as fast as you can and you want to get up with
- 16:12as little energy as you can on that, that small, thin board.
- 16:15The difference with our TOEFL board compared to a kite full
- 16:20board that most people would buy if I was making it as a kite
- 16:22full board, it would just be lighter.
- 16:23The our TOEFL board has a, has a denser foam and it has open
- 16:28heavier layup just because it gets a lot of these TOEFL boards
- 16:30get a lot of abuse in boats or skis and they're banging
- 16:33together and all that kind of stuff.
- 16:35So, so you want it to, to survive that.
- 16:38It has our closed cell phone. So any of our boards would
- 16:41survive that from a technical perspective, but they're just
- 16:44going to get trash and you have all these dense repairs when,
- 16:46when, if they're smashing around a boat and getting, you know,
- 16:49when somebody's like, you know, people aren't always careful
- 16:51when they're loading your stuff into a boat.
- 16:53And then I also think with with a toefoil board, you know, it's
- 16:58not a necessarily a bad thing to have a bit of back weight when
- 17:01you're going streaming fast down a wave.
- 17:03The main thing I think it's to reduce windage as little as
- 17:05possible. But to have a board that's a
- 17:08pound and a half heavier than what we could do, I don't think
- 17:12that's as much of A disadvantage compared to kiting where you
- 17:14could be a lot more careful with your gear and you're not going
- 17:17quite as big necessarily in interest in terms of like
- 17:20stressful conditions. If it was a kite full board,
- 17:23dedicated kite full board, I'd probably shave some weight off
- 17:25it. So yeah, that's our, that's our
- 17:28TOEFL board, the Enigma we've got full drive board, which is
- 17:32just really our our emissary shape, which I'll which I'll
- 17:35talk about. So I personally see the full
- 17:39drive kind of foil assist board as really similar demands to a
- 17:44wing board in that you want it to get up on foil with as low as
- 17:48energy as possible, whether that energy is coming from a wing or
- 17:52a pair wing or a motor. To me, it's the same speed
- 17:56range. If you're trying to get on the
- 17:57same foil, you have a stall speed of that foil and the
- 18:00board's job is to cause as little drag as possible in that
- 18:04speed range between zero and say 7 knots to get to get up on
- 18:08foil. And similarly, you want it to
- 18:10track as little as possible. So we shape those rails in
- 18:13addition to efficiency and and kind of creating some lift in
- 18:17that transition zone between displacement planning.
- 18:20Those rails are made to shed water even if the board is going
- 18:23at a slight angle. So again, the difference though,
- 18:26of course, with our our capacitor, which is our full
- 18:29drive board is that has the trench and then it has a
- 18:32fiberglass nose so that the signal can transfer to travel
- 18:36into that board completely unencumbered by carbon.
- 18:40Are larger boards, like if you size into your weight, they
- 18:43still work great for full drive. But how I kind of explained that
- 18:49signal thing, and I'm, I'm not a full drive expert, but you don't
- 18:53dealt with it a handful of times is you're trying to degrade that
- 18:55signal as little as possible. So you know, if you have a
- 18:59carbon board and it's, it's really floaty, it's way above
- 19:02the surface. There's lots of places for that
- 19:04signal to kind of get through in the little all these little
- 19:06gaps. But if you've got a sinker and
- 19:08it's low in the water, all of a sudden the water just stops that
- 19:11signal. So even if you put the the
- 19:13remote on the board itself, you just got a lot less chance for
- 19:17that signal to get in. So that's why we go glass, so
- 19:20guys can size those down really small.
- 19:22Put the remote on top, anywhere in the nose, it will get into
- 19:25the board. It's that sounds like really
- 19:27good thinking. I mean, I've, I've recently,
- 19:30I've recently moved to to having a A4 wheel drive and I thought
- 19:34I'll just use some of the gear I've currently got.
- 19:37And yeah, it's, it's not working too well.
- 19:39I've got the, I've got the remote on the board.
- 19:41If I keep it on the board, it's alright.
- 19:43But as soon as I stand up, it just cuts right off.
- 19:45So it's, it's obvious. You've really got to get, you've
- 19:48really got to get the right board to get that signal.
- 19:50I've seen people cut holes in their carbon boards.
- 19:54Yeah, yeah. To get a signal into the middle,
- 19:57Yeah. And glass over it.
- 19:58But I don't know what that does if you want to change boards one
- 20:01day and explain that to the next person.
- 20:03But yeah, that sounds really sounds really sensible to have
- 20:06to have that set up. So there's that really clear
- 20:09area for the signal to go through because, yeah, there's
- 20:12nothing worse than than losing that signal when you're up and
- 20:14going. Yeah.
- 20:16And I think you should. Well, anyway, it's, it's, I
- 20:18think it's more about start up just because where the water is
- 20:22blocking the unit. So you have to go through the
- 20:24board. But but yeah, then I guess kind
- 20:28of like the, the, the meat of Omen's line is, is really two
- 20:31boards like what, what I think we're known for is the, the Flux
- 20:35and the Enigma. So those are both are prone and
- 20:39winging. And certainly both are used for
- 20:42for pairing. I would say the Ms. there is a
- 20:44is a pairing specialist, whereas lots of guys are having success
- 20:47pairing the flux just because of the ease of use.
- 20:51But the flux, so to kind of step back, the flux was our first
- 20:55board and that was a, that was a winging and prong board pair
- 20:59winging really, really wasn't a thing at the time.
- 21:02So the next kind of thing that I worked on was the emissary
- 21:07design. So and that was using a lot of
- 21:10CFD tools to try to improve the on the flux design and have that
- 21:15board not only have increased efficiency because of pair
- 21:19winging and where that was going, but also increased
- 21:22efficiency through a range of angle of attack of the board
- 21:27compared to optimizing just for a straight take off.
- 21:32And then and you rather than having that skipping pump to
- 21:36allow you to change angle attack on the board without kind of
- 21:41causing a lot of amount of drag to start getting more lift from
- 21:43your foil. And that also works out really
- 21:45well. When you're on a wave, the angle
- 21:48of the water is actually curved. So the board is going through a
- 21:51range of angle attack if you if you measure where like the
- 21:55actual flow of the water and how you're moving through that
- 21:58water. So that's turned out, of course.
- 22:01Well, it's happily worked out really well for pair winging
- 22:05because you get a much more efficient hall and with the
- 22:09limited range of pair wings that allows you to downsize your pair
- 22:11wing to get more high end, so you can make it more practical
- 22:14to go up wind and and it's just being on an overpowered pair
- 22:17wing is is crappy, as most pair wingers will tell you.
- 22:21And then where the flux V2. So I guess with the emissary
- 22:25design, I should say is, is it's really, we had the flux design
- 22:30and that was a really popular board and accessible and, and we
- 22:34had that really nice performance to ease of use ratio.
- 22:37So at the emissary, again, very selfishly, I wanted to create
- 22:41something basically that at my skill level, it wasn't a
- 22:46problem, but I'm not trying to make it for anybody lower
- 22:50skilled, if that makes sense. Of course I want ease of use,
- 22:53but I'm not sacrificing performance for ease of use at
- 22:56all. It's just how high performance
- 22:58can I get a board, how much can I possibly reduce the volume
- 23:02while retaining or improving the low end of these boards?
- 23:06So it's really a no compromises board that way.
- 23:10And then with the flux, it's not so much a, it's not a revolution
- 23:15in Hall design. It's really just those same
- 23:18principles that work really well with the emissary.
- 23:22But anywhere where I could grab some ease of use, if I can get,
- 23:27hey, I can get 10 percent, 15% ease of use, let's say, but I'm
- 23:31only giving away 2% performance. That's where it's, it's still a
- 23:35very high performance board, but it's a much more balanced board
- 23:38in terms of the ratio of ease of use to performance.
- 23:41So it's, I actually think we probably sell a pretty similar
- 23:44amount of them, but I, I would say like broadly it's a more
- 23:47more accessible board that way because it's, it's well, it's
- 23:51just easier to use. Now, that being said, there are
- 23:54some people because of just their preferences that prefer
- 23:56that board regardless. And they can, they ride both and
- 23:59they prefer that. Like the Mackey guys, they're,
- 24:01they were riding the emissary for for a year and they've
- 24:04switched to the flux and that's because they're both Tucker and
- 24:09Jeff, they really like a lower deck.
- 24:11And that not only is that that's easier to use because you're
- 24:14more stable, but it just kind of gives that more connected
- 24:17feeling. What you're paying for with that
- 24:21is you're pushing, if you're, if you have the same amount of
- 24:23volume, you drop the deck, you got to push that volume
- 24:26somewhere. So with the emissary design,
- 24:30it's more drawn out and a lot of that volume because of that
- 24:33longer board is, is underneath the rider where it affects the
- 24:36swing weight last. And then you've got this thin
- 24:40nose and tail extending out, whereas the flux has that drop
- 24:44deck and the more volume in the nose and tail and they are a bit
- 24:48shorter. And again that comes down to
- 24:50some of that ease of use. And as well, I would say like at
- 24:53a higher level, the anasary is, is kind of really good for fast
- 24:58flowing carbs and the flux, if you have that kind of more
- 25:02surfy, pivoty style, just because it's shorter and more
- 25:06compact, even though it does have the volume pushed out size
- 25:08for size, it's it's more compact more and it's also a bit wider,
- 25:12right, to get ease of use. But also it allows us to just
- 25:15put it in a bit of a shorter, snappier package.
- 25:19So generally I don't want to say 1 is a wing board and 1 is a is
- 25:23not. But certainly the flux is what's
- 25:26most popular for for winging and those that are perrowing or
- 25:30perrowing curious or looking for like a a really high performance
- 25:34light wind board or going for the for the emissary, if that
- 25:36makes sense. Yeah, yeah.
- 25:38And there was what, three years between the the original Flux
- 25:41and the and the V2 and obviously some rider feedback and some
- 25:46time to evolve that. What changed?
- 25:49What was the maybe one or couple of things that you really wanted
- 25:52to evolve from that V1 to V2? And if you got on one and then
- 25:56got on the other, what would you notice?
- 25:58It was different. It's hard.
- 25:59It's hard for me to say a bit because the the flux V2 is
- 26:03actually more of a evolution of the annissary than it is the
- 26:08flux V1, even though the annissary is A is an evolution
- 26:11of the flux. So it's kind of hard to say
- 26:13without skipping a step B most of those, most of the sizes in
- 26:17the D2 range, the width is like we there's there is some
- 26:21differences, but the width is pretty similar because those
- 26:25proved to be like we were right. I think in in the flux D1 with
- 26:29most of their widths in terms of at that volume for a certain
- 26:33type of rider, it works really well to have that width.
- 26:36So most of them have been longer and although in that range
- 26:39through and that's really just a byproduct of people moving
- 26:43towards faster, higher aspect foils that have a bit higher
- 26:47stall speed. So we want the board to little
- 26:50be a little bit more efficient at those higher speeds.
- 26:53And by and by pushing the length, we can change the
- 26:56transition between purely displacement and and planning to
- 27:00make it easier to get up on higher performance foils.
- 27:02So there's that I think, I guess, yeah, to answer your your
- 27:06previous question, now that I'm thinking about it, the main
- 27:08thing you'd notice on say, if you were on a 72 liter flex D1
- 27:12and a 72 liter flex D2 would be increased low end.
- 27:16So if they're just easier up on to foil.
- 27:20So that would probably be the most noticeable thing right
- 27:22away. You'd notice that it's a bit
- 27:24thinner just because of pushing that volume nose in front.
- 27:27So when you're in the water Fender a bit longer.
- 27:30So when you're sitting there static trying to balance on the
- 27:32board, it's a little bit easier to bounce, not only because you
- 27:35have a lower center of gravity, but because you have that volume
- 27:384 1/2 and a bit more length. So you've noticed that.
- 27:43And then one thing that you maybe takes two or three
- 27:46sessions to notice is both of those boards had a great
- 27:48touchdown performance when you're flying straight.
- 27:51But the Flux could get more caught up in a rail if you dig a
- 27:55rail hard during a turn, whereas the Flux V2 inherits that from
- 28:01the emissary. And not even in regardless of
- 28:03whether you come straight down into the water or you're you're
- 28:07digging real hard during a turn, it still releases and doesn't
- 28:10throw off the the trajectory of your turn, if that makes sense.
- 28:15Yeah, I've listened to quite a bit of your content and by the
- 28:18way it's excellent. So listeners should definitely
- 28:21have a look at your your video series.
- 28:23You, you were talking about being able to kind of downsize
- 28:27board volume of the V2, but also improving that low end
- 28:30performance. So is that down to where you put
- 28:33the volume distribution of the volume enabled you to do that?
- 28:36Because obviously downside is in volume and improving low end are
- 28:39normally kind of opposite things.
- 28:41You normally can't achieve lower volume and have lower, lower,
- 28:45lower in performance in a high or low in performance, you know.
- 28:48Yeah, yeah. And I I think certainly the I
- 28:51would say V1 to V2. I'm not really saying that if
- 28:55somebody had a 72 liter V1, I'm not really saying necessarily
- 28:59that they would get on a 60 liter V2 and have still have
- 29:02higher better low end. It's it is, it's not impossible,
- 29:06but probably not quite that extreme.
- 29:09I think it was more saying I'm I'm what I meant to say anyway,
- 29:13is that compared to other just a generic board like that was a
- 29:18big a big kind of education piece.
- 29:20I think with the flux D1, because I would say it was a
- 29:23pretty radical shape at the time that just the dimensions even it
- 29:26was a lot longer than what people were used to at the time.
- 29:29I think it was the thought was like, well, how short of a board
- 29:33can we pack 90 liters into? I've got a, you know, I've got a
- 29:36four 305 liter board, right? So, and I think there was a,
- 29:42there was a hall design which let's leads to efficiency.
- 29:45And as we talked about before, the less drag your your board
- 29:49produces, the more that energy is going to accelerating your
- 29:53system and maintaining your speed and ultimately getting
- 29:55onto foil. So a more efficient hall design
- 29:58is regardless of the volume is going to get you on foil sooner.
- 30:03Now not say volume doesn't play a role in that, but length and
- 30:07width both play a role and depending on the speed at which
- 30:10you're going those the kind of the importance of those things
- 30:13shifts. So I think at the beginning it
- 30:17was just educating people. You know, hey, you've heard
- 30:21about Omen and you're on a 90 leader board.
- 30:24You don't need our 84 flux you, you weigh 170 lbs, the 84 if
- 30:29what you're talking about is you want to get on a smaller board
- 30:31and go from your 90 to our 60. And that was pretty radical for
- 30:35a lot of people. They just didn't believe it.
- 30:38And you know, not to just say it's all whole shaped, but a
- 30:41part of it is just, it was a longer board.
- 30:43So it's like, yeah, you're, you're 4 foot 690 liter, R60
- 30:49liter, which is 5 foot 3 1/2. It's it's going to have
- 30:52considerable lower end. And I love to say what's it's
- 30:55all the design, but you know, part of it is just it's a
- 30:58longer, narrower board and you only weigh 170 lbs or you know,
- 31:02whatever it is 70 kilos. You don't, you don't need that
- 31:06much volume. And and not to say that, you
- 31:09know, 120 liter down when Sup, when it's six knots isn't of
- 31:13course that's going to have more low end, but further conditions.
- 31:16Most people are looking to ride in and have fun in ocean
- 31:20conditions. You don't need that much volume
- 31:22if you got the right combination of length and width and the
- 31:26whole design. And and some boards are getting
- 31:29very narrow, which obviously has its advantages, but also it's
- 31:33it's disadvantaged in terms of of balance.
- 31:35How did you decide what sort of width you're going to run with
- 31:39for the for the design? So my, my personal board of
- 31:43choice is the 66th emissary and I pretty much ride that for
- 31:47everything unless it's like really good pruning conditions.
- 31:49And I'll, I'll be on a small, a smaller board, but I mean, I'm
- 31:53actually often, this has been a terrible year for prawns.
- 31:56We've often got current or small waves or wind chops.
- 31:59I'm actually been proning the 66th emissary a lot.
- 32:02But so the way I, the way I came up with the, the width for the
- 32:0566th emissary, which is 19.5 inches, is actually just what is
- 32:11this the narrowest possible width that I can comfortably
- 32:16make all my turns on? So when I'm and I, all of our
- 32:20boards have the, the pad pushed out to the Max and I sharpen,
- 32:27you know, on the top rail of the board, they're not sharp, but
- 32:31they're to, if I was going for resiliency, I'd probably make
- 32:34them a little bit rounder, but I'm making them pretty
- 32:37aggressively. Again, I don't want to say
- 32:39sharp, but it's a, it's a tighter radius than what I would
- 32:42do if I was trying to maximize the impact protection of those
- 32:46and, and maybe save somebody's shins.
- 32:48But because I want of that width of that board, I want the
- 32:52maximum standing area. So with, if you look at a
- 32:55picture of me on the 19.5 wide 66th emissary, my toes are
- 32:59basically right at the edge of one deck pad and my heels are at
- 33:03the edge of the other. So again, totally selfishly,
- 33:06that's why it's 19.5 wide just because that's what I want on my
- 33:10board. And then as the 78 leader, my
- 33:14concept for that is basically that's my board if I was a
- 33:16bigger guy. So it is 20.5.
- 33:19It's it's a bit wider. The 55 is actually it's actually
- 33:2319.5, but mainly because I consider that more of a free
- 33:27ride, high performance wing board for for a guy that's
- 33:31that's kind of my size or, or a slightly bigger.
- 33:34And also I think with width of boards, to kind of go on a weird
- 33:38tangent, is the width of the board is at the apex, But what
- 33:42is more important is the width where you're standing.
- 33:44So even though some boards, if you have a more squared off
- 33:48tail, it might be narrower in the width, but you actually have
- 33:52more more area for your back foot.
- 33:56Anyway, that's how that's how the 66, which the range really
- 34:01progresses from that. It was just based on what I
- 34:03need. And then interestingly, on
- 34:05width, I had been playing because I've been so obsessed
- 34:09with pair winging and wanting to extend the range.
- 34:12I started playing with, with a couple concept boards at the
- 34:15same time as the flocks over the last year and basically taking a
- 34:1866 board because I don't, I don't want to actually add more
- 34:22weight. I'm I'm quite happy with that,
- 34:24but I wanted to add more low end and I really started stretching
- 34:27out that shape and going narrower.
- 34:31So I had a had a prototype which I was really excited about and
- 34:35it was 6 foot 6 and 17.5 watts significantly narrower.
- 34:42And this is going to have great low end.
- 34:44I'm not going to be able to turn it as well because I can't get
- 34:47that leverage on my turns, which I think again, as a as a
- 34:51tangent, a lot of people see guys in in Maui that are on a 17
- 34:56minutes down. What's up ripping turns.
- 34:58But those guys have tendons and ligaments in their ankles like
- 35:02crazy. Like you, you just, you're not
- 35:04going to get that unless you're, unless you're a pro skateboarder
- 35:07or you're, you're riding like that every day.
- 35:10It's it's really hard. And they're also they're also so
- 35:13far ahead in that they're planning their turn three turns
- 35:16earlier. They're not reacting to
- 35:18something as as quickly as you could with a smaller board and
- 35:21having that bit wider base. So anyway, I had this this board
- 35:25which I really compromised on the width to get more low end.
- 35:30But what was really interesting is it was worse low end.
- 35:34And and it wouldn't be the case if that was 120 leader board
- 35:39because for me on a on 120 SI just kind of kick that a little
- 35:43bit out of the air. But that board is floating.
- 35:46So all the hull needs to do is accelerate to let's say 7 knots.
- 35:51That's it. That's its only job.
- 35:53Just produces a little drag as possible.
- 35:55But the difference with the 66 board is the hull needs to lift
- 35:59you up out of the water. It needs to help.
- 36:01It needs to act like a submerged wing and then get you to the
- 36:04surface. So the volume is helping with
- 36:06that, But I'm only getting 66 kilograms of lift and the board
- 36:11and foil weigh, let's say, 10 kilograms.
- 36:14So I'm only getting 56 kilograms.
- 36:16And I weigh with my wetsuit, you know, 8590.
- 36:19So I need that 30 kilograms of lift needs to come somewhere.
- 36:22And it's not all coming from the foil at those really low, super,
- 36:26super low speeds, right? It's got to come from the board.
- 36:29So when you go narrower and certainly shape plays a role
- 36:34with this, but when you go narrow, you just don't get the
- 36:38lift from the board. So through testing after, after
- 36:42kind of having that, that failure of that really narrow,
- 36:46you know, we were, I was going to call it the pelagic because
- 36:49it was like this, this paralleling board for doing
- 36:51these major crossings where you want to guarantee you're going
- 36:54to, you're going to be able to get up even if the wind
- 36:55completely dies through the failure of the pelagic learned
- 36:59that the perfect width for a 66 board for me is actually 19.5.
- 37:05So I would love to say I knew that in designing it, but I just
- 37:08got lucky and that like my lack of ankle strength requires 19.5
- 37:14inches, which is pretty much exactly what my 85 kilograms
- 37:17needs. Given the whole design of the
- 37:19emissary and the stall speed of a 900 agent.
- 37:22That's exactly what I need to get that board up on foil.
- 37:26So now with that pelagic, the interesting that once you're at
- 37:29the surface, it just takes off. But I needed more wind to get it
- 37:34to the surface than I needed for the 66 to both get to the
- 37:38surface and take off. So it had this, this real kind
- 37:41of like we're talking about with the the signal for the foil
- 37:45drive is there's these different gates that you have to get
- 37:48through. And if you can't forget through
- 37:49gate one, you don't even get to knock on gate 2.
- 37:52Doesn't matter. You got the key for gate 2.
- 37:55You can't get through day one, You're fucked, right?
- 37:59Yeah, absolutely. It's like, and we, we talked
- 38:02about that with foil design A lot too.
- 38:04You can say, Hey, this foil has great high speed.
- 38:08It's like, well, what the stall speed?
- 38:10And if, if the stall speed is high, it's like a paraglider.
- 38:14It's like, wow, I've got this new paraglider.
- 38:16It's so fast. And then you jump off the Cliff
- 38:19and you you fall to your death and the other guy glides around.
- 38:22It's like, well, you got to have the low end or else you can
- 38:24never get to that high speed. So when we're comparing
- 38:27different foils in both prototyping and simulation,
- 38:31we're normalizing knot by surface area or by aspect ratio
- 38:34or span or normalizing by stall speed.
- 38:38So if we had one foil that has like 1 section or whatever
- 38:42design that has phenomenal high end and turning and this and
- 38:45that and the stall speed is 7.5 knots and another one that has,
- 38:52let's say whatever other great attributes and it's 8, we
- 38:55actually have to change the size.
- 38:56So we'd be comparing say an 800 versus an 850.
- 39:01Because if they both have the same stall speed, that's what I
- 39:04care about. And it it ends up you, you wait
- 39:07stall speed and low end glide a lot heavier when you do that
- 39:11because what's the point of a high speed 900 that you can't
- 39:14get on onto foil? Pay Foilers.
- 39:17That wraps up Part 1 of my conversation with Greg from Omen
- 39:21Foils. Now make sure you check out Part
- 39:232 where we take a much deeper dive into the Omen foil range
- 39:27and the thinking behind the foil designs.
- 39:30We also go into detail on how to tune your gear and get the most
- 39:34performance out of your foils. Now foil tuning is not something
- 39:37I've done a lot and it certainly gave me some really helpful
- 39:40areas to work on when out on the water.
- 39:43Next, Thanks again for listening and I'll see you in Part 2.