Latest / FOILERS / AXIS Tempo & Surge Deep Dive with Adrian Roper | At The Foil Shop
Transcript
- 0:09I'm Pete Walmsley and welcome back to the Foilers Podcast.
- 0:14I show you where we dive deep into the world of foiling with
- 0:17the legends, innovators, and passionate individuals pushing
- 0:21the boundaries of this incredible sport and driving it
- 0:24forward. To get the latest content when
- 0:26it goes live, don't forget to follow this podcast and
- 0:30subscribe to the Foilers YouTube channel.
- 0:33This episode is brought to you by The Foil Shop in Perth, WA.
- 0:37They recently hosted an evening with the Axis team.
- 0:41Adrian provided an in depth overview of their latest gear,
- 0:44including their tempo downwind line up and titanium fuselage
- 0:49and their surge surf wings. As usual from Adrian, it's a
- 0:53technical talk that offers you the inside scoop on the process
- 0:57of developing these new products.
- 0:59We also hear from his team riders on their real world
- 1:02experience riding the gear and how they compare to the other
- 1:05wings in their range. Enjoy.
- 1:09I'll start with the tempo and the the titanium fuselage.
- 1:13This was started, I guess last year we had a fireball and they
- 1:18were all around 13 aspect ratio pretty much and they fit it on
- 1:22the existing black fuselage. When we released the firewall,
- 1:27we'd already done some testing on some much higher ones around
- 1:3115 aspect ratio and we knew that they were better, but we were
- 1:35running into problems trying to get there to fit onto that a
- 1:39fruit. Back in the day we had the red
- 1:41fuselage for the the big chord thick wings and then as as time
- 1:46went on, we used the the black fuselage and that's been a
- 1:50really good fit for everything so far.
- 1:52That's got a bit more chord. But with these ones being so
- 1:55narrow and so thin, it's really, really hard to get though.
- 1:59It was never going to work to fit them on there.
- 2:00So we had to develop a new fuselage system.
- 2:06Another big part of the problem with this wing is that it's so
- 2:09thin. It's less than 10 mil stiff
- 2:11there and to get that so that it just didn't snap off was quite a
- 2:15big deal. We had a lot of them snap off.
- 2:17We had a lot of people swimming for kilometers at a time out at
- 2:21sea with only half a wing. That he knows how to swim.
- 2:23Not, not easy, not easy to get that to work.
- 2:26So I'll take this apart as you can see how it works.
- 2:30It has two grub screws in the front and inside this is all
- 2:36titanium. And then inside of the front end
- 2:39is a expansion plate. So these grub screws go through
- 2:43at the expansion plate and that comes off.
- 2:46So that just comes off that's this top plate here is stainless
- 2:50steel and this in the middle here is a screw with a spring
- 2:54underneath it and that actually pulls the stainless steel up.
- 2:57And the reason it pulls it up is to create a slight clearance so
- 3:00that you can slide the wing on there easily.
- 3:03When those scrub screws go through, they hit, they hit this
- 3:06expansion plate. These are low, low pitch M8
- 3:10screws. So they're a 1mm pitch.
- 3:13So like 1/4 of a turn is .25 the mill .25 mil is about how much
- 3:19you need to expand that to tighten it, probably put that
- 3:22back on again and just whack it on.
- 3:24It's, you know, it's a little bit loose at that stage and then
- 3:27you just tighten the grub screws up and it expands inside.
- 3:31We played around with a lot of different methods to get the
- 3:34titanium to tighten onto that hole inside there.
- 3:38We initially had a a titanium fuselage with a a cut through it
- 3:42and I had a little tab that that moved and it it kind of worked
- 3:45pretty well, but it relied on when it opened, it only pushed
- 3:48on that that one point and the back end of the fuse here.
- 3:52This had to rely on the titanium being the exact size and the the
- 3:57molding being exact was it was a perfect tolerance.
- 4:00And it also was kind of difficult to get it on and off.
- 4:03So with the expansion plate, it gets exactly the right tension
- 4:07that it needs every time the grub screws stop falling off.
- 4:11So even though I haven't tightened it up, no, you could
- 4:14give it off because it's it's you know, the grub screws on
- 4:18there. So you tighten it finger tight
- 4:20to start with and then you put the key in and do about 1/4
- 4:24turn. So I'm heading for about here.
- 4:26That's all you do just a quarter turn.
- 4:27You don't need to do any more than that.
- 4:29And that is totally rigid like if you try and feel with your
- 4:33fingers on there, there is no movement in that joint.
- 4:36That's the stiffest joint that we've been able to achieve to
- 4:39hold everything together been really good.
- 4:42The back end is a is a similar setup.
- 4:45It has just one screw to tighten it up.
- 4:48And one of the things about this is that this wing being served
- 4:52by aspect and being so thin, it's very low drag and existing
- 4:57fuselage and and in fact fuselage from any company that
- 5:00you can choose is actually way, way too thick.
- 5:03You can't actually get a really thin high spec wing like this.
- 5:07You can't expect that to work on a big chunk.
- 5:09In fact, fuselage there's just too much drag on the center
- 5:12section to make that work. That our new fuse that we've got
- 5:16there. We've done some new dock start
- 5:18pump wings that are 1500 span, 1750 span and that works
- 5:22fantastically for them. So it's kind of as the sport is
- 5:26evolving, it is sort of spreading itself out and there's
- 5:29things that are specific for this or specific for whatever.
- 5:32You can necessarily have one-size-fits-all.
- 5:36Remind me to talk about mass at some stage.
- 5:38So that comes off the back and it has an expansion plate on on
- 5:41the back of there as well. You'll notice that there's a, a
- 5:45cover plate on here or you, you can kind of hardly see it, but
- 5:48there is a have a plate on there for the screws.
- 5:51So that has a a little screw in there and you undo that and
- 5:57there's your two screws parting onto the head there.
- 5:59The the edges of this are ridiculously sharp.
- 6:02You're going to be really careful not to cut yourself
- 6:05there. But when it does go together
- 6:07because of the edges are so perfect there, it's almost
- 6:10seamless. Most people like if they're
- 6:12riding the the tempo set up, they have their mask and they
- 6:15put this on kind of once and then that's done.
- 6:18So once that's on, a lot of people use it, it stays on and
- 6:24the fuselage cover that's got a hole for the mast and the bottom
- 6:27of it that just goes around the whole thing and stays on it so
- 6:31that if that's in the back of your car, it doesn't smash your
- 6:33car or smash the fuselage. The wings, the biggest one is
- 6:39one O 9 O span and the smallest one at the moment is 8 nineties
- 6:44fan and we have a bunch of rear wings.
- 6:48That one that was on there, there's a there's a 30 and they
- 6:52go the largest one's 45 and for smallest is 25.
- 6:58We've been 25 here. It's your favorite.
- 7:02Yeah, yeah. They're they're much stiffer
- 7:05than the other skinnies that are narrow.
- 7:09They are, and that's actually a really good question.
- 7:11All of these wings like when we were racing in kind of a long
- 7:14story, but it's worth it when we're in why we had guys racing
- 7:19on the the whole new tempo system and it was actually going
- 7:22really well, but it had the the old tan system.
- 7:25So the fit on the front wasn't quite perfect.
- 7:28And you know, we're reaching bits of aluminium inches and
- 7:31there to try and make it fit every time.
- 7:33And you know, that needed fixing.
- 7:35The expansion plate in there has made that much better.
- 7:38One of the other things that we've already felt is that we've
- 7:40done an awful lot on the wings and the fuselage.
- 7:42That was working great, but we felt like the mast needed more
- 7:45work. But we're in Maui.
- 7:48The races were in two weeks. We didn't have time to build a
- 7:50new mold and do everything else that we knew.
- 7:52That was our next project. And then I actually saw one of
- 7:55the guys at the beach sanding all day and he sanded the whole
- 8:00carbonite off the outside of us. His front went, it's sanded
- 8:04through the whole thing. And it got me to thinking we
- 8:06could probably sand one of the last that we got.
- 8:10So I actually found Perv's mast and we with Frank, we, we ground
- 8:16the woven carbon off the outside.
- 8:18Now every foil that you see anywhere has woven carbon on the
- 8:23outside. And that's always been done
- 8:26right since day one. And the reason that's the errors
- 8:29that it's a, the woven carbon is, is thicker and it's like a
- 8:33sort of faulty surface. So it actually gives room to,
- 8:38you know, fix everything out when it's being pressed.
- 8:40So it evens it out and makes it look pretty smooth and pretty
- 8:42nice. So but it's it's just it's
- 8:47normal carbon, normal modulus carbon and it's woven carbon to
- 8:51be really effective has to be in a straight line to be in
- 8:54tension. And the woven carbon, because of
- 8:56the woven effect, it's kind of like a spring.
- 8:59So it's not a stiff underneath that woven carbon again on all
- 9:02the wings inside of there is unidirectional carbon and that's
- 9:06carbon that is all running in One Direction.
- 9:09It's very, very thin. Typically a woven carbon is
- 9:11about .5 just over .5 thick and the UNI carbon is about .2 of a
- 9:19nil thick, very, very flat. So mast wings all built with
- 9:24unique carbon, but with a carbon on the outside.
- 9:26So the mast that we had, we sanded all of the woven off the
- 9:30outside. It was relatively easy to see
- 9:32where you're going. You could just sand through it.
- 9:34We managed to get 1.1 mil of the thickness of the mast sanded at
- 9:40theatre and Perth was the first head of Yahoo on it.
- 9:43I think either the you and him to him run practice or something
- 9:46you can't remember now, but came back in and said that's great,
- 9:51that's fantastic. And there was no negative effect
- 9:53from it. It didn't actually feel less
- 9:56stuff. So it got me to thinking that
- 9:59probably do a lot better with the wings.
- 10:01And like, if you think of the the the tips of these wings
- 10:06here, it's probably only 2 1/2 mil thick, you know, through
- 10:09here. And you got to figure that 1.1
- 10:13mil of that was woven carbon, which is, you know, might
- 10:16useless but not very good. So what we did, you know, if I
- 10:20got the factory to build the same wing, same mold, but remove
- 10:24the woven carbon or replace it with unicarbon and 1st wing they
- 10:28built, they did a bend test. So they put load cells on 100
- 10:31mils and from the end and they just pushed down to 100
- 10:34kilograms and they measure how much the wing bends and the
- 10:38original 1 bent 38 mil and one with the revised unicarbon bent
- 10:4425 mil. So it's like 25% stiffer just by
- 10:48revising the Mamet. So we did the rear wing as well.
- 10:51And I mean, that's even more obvious because it's so thin and
- 10:55it made these wings like, you know, you can barely bend.
- 10:59It's really, really stiff. And the wings we had earlier
- 11:01than that, they were just flat fixing.
- 11:03Well, that was all we could do. So we all the guys that raced
- 11:07the the the Maui Race series M2M and the M2O, we had nine out of
- 11:12the top 20 were writing access. And since then, actually quite a
- 11:16few others have changed over to access.
- 11:18So I'd say this foil set up is probably the dominant down 14
- 11:22set up on the market at the moment.
- 11:24And it's going really well. And we're pretty stoked with to
- 11:28have built that car has been racing on it.
- 11:30And he started on the the early the fireballs when he when he
- 11:35joined on and then staffed with all the stuff.
- 11:37And apart from like since Maui racing, he's pretty much run
- 11:41every race in Hawaii, North Shore, Oahu, France, everywhere
- 11:46since then. Basically so this was my wing I
- 11:49used for all the Hawaii races. That's the 9:20 and I never felt
- 11:54like I needed anything bigger straight out the races.
- 11:56I ended up trying the small one. I wish I'd used that for all the
- 11:58races. The speed carry from them is is
- 12:02actually insane. And for all France, I use the
- 12:061020 and that's the 650 area one that if conditions are
- 12:11questionable, that's the wing I'll take the range on that is
- 12:15insane. I could do 140 fives up to two
- 12:1830s and you'd be comfortable in all those ranges.
- 12:21So I'd start trying them and they've, they've treated me
- 12:23really. Well, I'd say with the the
- 12:25tempo, I've always I've used it a lot winging and if you can, if
- 12:30I compare to the the fireball, say the one O 2O is the one main
- 12:34one I use. It gets about the same as the
- 12:36thousand fireball. But once you're actually up, it
- 12:40actually feels like the stall speed is actually a lot better.
- 12:43So it'll go a lot slower. It'll also definitely go a lot
- 12:46faster. So it it's a lot less wing, but
- 12:50it's actually given a whole lot more so.
- 12:52How much of that do you think is due to the irreduction in drag?
- 12:56It's pretty. Insulation.
- 12:58Well, it's it's. Both.
- 13:00It's both. It's the same Air Force section.
- 13:02It's the same force section we use in the firewall, but it's
- 13:06just so much less area. There is less there to slow you
- 13:09down and it's it's noticeable. But when you back off,
- 13:12whatever's driving you and just carries on running.
- 13:14A lot of the time in the racing. I was in a boat with Shannon and
- 13:18at one stage we're going alongside one of the twins and
- 13:22Ito. And Ito was, he was pumping, he
- 13:25pumped that whole entire race, just pumping and tired.
- 13:29And twin was running next to him and he was just doing a little
- 13:32every now and again, just every now and again.
- 13:35And if you watch car racing, yeah, not an awful lot of
- 13:39pumping going on. It's just running.
- 13:41They run free. There's very little drag in
- 13:44them. And you, you kind of have to do
- 13:46a whole, you have to learn to do a bit less.
- 13:49I I've noticed quite a few people on their first round,
- 13:51they're trying to pump like crazy on it.
- 13:53And you know, you got to tell them this to bank off, let it do
- 13:57its work. It'll it'll do it.
- 13:59So then you'd expand other ranges into that fuselage.
- 14:03Yep, Yeah. And given time, we will.
- 14:05This titanium fuselage is not a cheap thing.
- 14:10Everything about it is designed to be the very best it can be.
- 14:14And I think it will be very applicable for other things.
- 14:16We have some wind foil race front wing, back wing setups
- 14:21that will fit on this and they're relatively close.
- 14:23Still a bit of work to go on those and who else knows who
- 14:27knows what else we'll do on the in the future.
- 14:29It really the system suits, you know, narrow cord and high
- 14:35performance wings, the surge wings, you know, we didn't
- 14:39actually need to, we didn't need to put those on here.
- 14:42We could of, but we wanted them to be ready for anyone to use on
- 14:45their existing setup and there's not really any compromise for
- 14:48that. I fit perfectly.
- 14:51How hard is to write the table? Not hard.
- 14:54It's really not hard. I think to get the best out of
- 14:58it, you've got to be a good writer.
- 14:59But I mean, I've had a bunch of people demo it and they've kind
- 15:03of gone. Why why wouldn't this is
- 15:05winging? Why wouldn't I describe that as
- 15:07my my general wing? It's it's not really but it
- 15:10looks ridiculously small an area, but it get like the one O
- 15:152O version gets up about the same just 1000 fireball and once
- 15:19you're up. Those fireballs go using me and
- 15:22they have very years of friendly and I'm a heavy boy.
- 15:26Yes, I'm telling you these these are even more so.
- 15:29Yeah, I was very surprised to have with that for oh, Oh yeah.
- 15:34But this is easy. Yeah, the other guy I saw.
- 15:36This is my everyday. It's supposed to be easy I
- 15:38think, and I've actually had quite a few people come off.
- 15:41I had one guy, Tiago Campos, and he had actually the year before
- 15:48he was writing an art Pro 105 one or something like that.
- 15:54And right at the start of one of the Mario races, I walked past
- 15:56and saw you as Scott and I saw should really be on the
- 15:59fireball. And I said I walked Brown and I
- 16:01went back and said, you know, we should, you know, put you on the
- 16:04fireball. And he said I can't, I can't
- 16:06race on a wing I've never used. And I said, oh, and I walked
- 16:09away and came back and said, I think you can, I think you're
- 16:11going to so just get over. We just bolted the thousand on
- 16:15and he went out and send it on a wing he'd never used before.
- 16:18And I saw him at the end of the race and I said, how was that?
- 16:20He said perfect. And again this year we got there
- 16:23and it was same again. He had his Fireball 1000 and I
- 16:27walked past and I was like, you're getting in A1O2O.
- 16:29So we put a one O 2 off. He he pedaled out, wrote it
- 16:32unused and he was totally comfortable on it.
- 16:35So that if you've been on that platform, it's not hard to to
- 16:39swap over to it. It's pretty comfortable, only
- 16:42easier. I get testament to that as well.
- 16:44It's Shannon's daughter, yeah. Roxy, Finland to downwind.
- 16:49She went to the gorge and it's 16 aspect wing.
- 16:53She can learn to downwind on the 1090 super easy, but yeah, yeah,
- 17:01there is that. Wouldn't they be too fast for
- 17:03the gorge? No, they're actually OK over
- 17:05there. I mean, ideally at the Gorge,
- 17:07most people are not interested in going anywhere fast, and the
- 17:10surge is the one over there now. She was just learning, so she
- 17:14wanted to get up and stay up and glide and it worked perfectly
- 17:17for it for that. Hey foilers, I just want to take
- 17:21a moment to let you know about lip sunglasses.
- 17:24They're made for water sports and they're absolutely game
- 17:27changing. I first bought a pair of lips
- 17:29and glasses because I had UV damage in one of my eyes from
- 17:33long term exposure through many years of water sports.
- 17:36I was also getting very tired of squinting through glare every
- 17:40time I went falling and honestly they blew me away.
- 17:43They're made for water sports. They've got lightweight and
- 17:46flexible frames for comfort and durability.
- 17:48They've got injected polarization in the lenses for
- 17:51glare free vision and a double stage retention system that
- 17:55means they can't come off even in the biggest wipeout.
- 17:58They also have a watershedding lens coating that keeps your
- 18:01view crystal clear. I love them so much that I
- 18:04actually became the Australian distributor.
- 18:07If you want the best on water eyewear, check out Lip
- 18:10sunglasses. And as Foilers listeners, you
- 18:12get 15% off their premium Typhoon model with Zeiss lenses
- 18:17using the code Foilers 15. Give them a try and do your eyes
- 18:22a favour. There's nothing I've been
- 18:24harping on about for many, many, many years.
- 18:27And that is that that when you're describing or comparing
- 18:30one wing to another wing, the the industry has basically done
- 18:34it by area. And to me that's the craziest,
- 18:37silliest idea. And as evidence of that, we've
- 18:40got the AT V2999 that's one O it's it's 1000 span and it's one
- 18:49O 2 four an area. We've got the Fireball 1000 it's
- 18:54also meter wide and that is 773 and the one O 2O is 650.
- 19:01So you've got one O1 O3653 different areas.
- 19:05They get up exactly the same. The range on on this one, the
- 19:086:50 is is way better bottom end and way better top end once
- 19:11you're up. Why are we comparing areas?
- 19:13Areas have never really made sense.
- 19:15But with the new foils that are higher aspect and higher camber,
- 19:19that makes even less sense than I've ever did to try and compare
- 19:22areas. The only way that I can compare
- 19:25any wings span and for me is a bit of a guideline and it works
- 19:29quite well. But the only real way that you
- 19:31can compare one wing with another is to actually have the
- 19:35exact design file for that wing, run CFD on it and and get all
- 19:39the info. And then I get all graphs and I
- 19:41do the same calculated right away.
- 19:44And I've got a bunch of graphs and I can lay them on top of
- 19:47each other. I can see exactly which one will
- 19:49get up earlier where it tops out.
- 19:51You can compare exactly. You can see exactly what it is.
- 19:54That to me is the only way that you can compare 22 foils, but
- 19:57area that's just at Watson's. Have you ever calibrated any of
- 20:02those measurements with like getting behind the boat or
- 20:06testing it in a? Real.
- 20:08So that the calculation was down there, that's exclusively on a
- 20:11front wing, doesn't even have the fairing on that, just the
- 20:14front wing. You've also got the fuselage,
- 20:16you've got a bit of mast, you've got the rear wing and there's a
- 20:18whole bunch of other stuff going on there.
- 20:19So it's not the whole solution. We have actually done CFD on the
- 20:23whole entire thing with a set amount of mast in there and
- 20:27we've actually run it through a series of terms and you get a so
- 20:31much data. It takes 24 hours or more to run
- 20:34it to actually get all that data.
- 20:36But the data you get back is pretty daunting.
- 20:38And to try and interpret that meaningfully and making any
- 20:41sense of it, I don't think we're not really at that stage yet,
- 20:44but it's very easy to do a wing and find out exactly what it's
- 20:47doing. So I had to ask options.
- 20:50Then you decide and I can't. If you're stuck with it, just go
- 20:53with spam, but don't use area. So if you're moving from one
- 20:58fork to another, I'd like to see if you can.
- 21:00The best way to do it on span, you span, but the best way to do
- 21:04it is to actually take it out from right hand.
- 21:07You can do that. Do you friendly shock?
- 21:08That's the best thing in the world.
- 21:10What's Camba does? Anyone know camba camba it's
- 21:17there's a? Section.
- 21:20It's a section. Sort of, yeah.
- 21:22So, so a lot of people have been, a lot of people have been
- 21:30looking at the reflex, like at the back of this wing has a a
- 21:33reflex in the hollow. And yeah, that kind of indicates
- 21:37that it's got some, some camber. But camber is actually a line.
- 21:42If you cut that wing in half and then look at it from the end,
- 21:45you've got the the top of the foil and you've got the bottom
- 21:48of the foil and there's an imaginary line, it's a real one,
- 21:52but you can't see it. That's halfway between the top
- 21:54and the bottom. So that's your camber line.
- 21:56You also have a chord line and a chord line goes from the the
- 22:00center of the leading edge, center of the trailing edge.
- 22:02That's a dead straight line. So if that was 100mm of chord
- 22:07and the distance to the camber was 2.5 mil, that's a 2 1/2%
- 22:12camber. The higher the camber, the
- 22:14higher the lift. Most of the Spitfires, the old
- 22:17art pros, they were 2 1/2% camber, which is kind of
- 22:22considered now to be a relatively neutral 4 sections.
- 22:25Not not that lifty, but it does run quite fast.
- 22:28This one has 3.7% camber and that creates really, really good
- 22:32lift at low speed and that's what gives the great glide to
- 22:36this at the firewall and the search.
- 22:38They've all got a very similar fork section.
- 22:41Thank you Lou that side. The homicide is actually can't
- 22:45have thing because it's so thin, so you can not no, it's the
- 22:50underside being concave. That's a slight distraction.
- 22:52You know you're actually going to look at the line that's half
- 22:55between the top and the bottom. Forget.
- 22:57The detail on the bottom. Forget the detail on the top.
- 22:59It's the line that's halfway in between you kind of can't see.
- 23:03And where the high point is, Yeah, on that chord, yeah.
- 23:06So you call that an aft loaded section.
- 23:09Yeah, yeah, Aft loaded sections generally as they go faster,
- 23:13they have a slight pitching down on it too.
- 23:15They want to tip down and you need to correct that with a rear
- 23:20wing as well. So that gets more and more
- 23:23involved and more detail you go into it.
- 23:27Another thing that we've done that started with the Spitfire
- 23:31as we did a, a straight median line.
- 23:34So if you take the Spitfire, the the thickest point is that just
- 23:41over a third back from side to side is a dead straight line.
- 23:44So the centre of lift on that foil roughly is a in a third
- 23:49straight line. So that means whether you're
- 23:51going slowly or fast, it's, it's kind of in that straight line.
- 23:54Earlier wings, there were a lot more right back and we, we kind
- 23:57of thought that right backness made them more turning, but I
- 24:02don't believe it actually does. These are all straight median
- 24:05line and they turn since it's when they all turn beautifully.
- 24:07By having that all in a straight line, what that does is it
- 24:11doesn't adjust. It doesn't need so much
- 24:13correction at various speeds. So you can get away with a lot
- 24:16smaller rear wings, but then 25 rear wing we had out before.
- 24:21I don't think anyone's got as a rear wing that's anywhere near
- 24:24as small as that and it totally comfortable with the tempos.
- 24:27That's because this is a straightening in line.
- 24:29It doesn't have a flip back in the tip.
- 24:31That's just straight. So everything's kind of lined
- 24:34up. I know that other people have
- 24:36tried that 25 mil cord wing on their high performance race
- 24:41foils and not being able to use it, not being able to get it
- 24:44work. And I I think it's because of
- 24:46the straightening in line. Any other questions on the tempo
- 24:49E type stuff? So the Guild is solid carbon,
- 24:52there's nothing in the core. There's no room for core.
- 24:55But it's carbon core, not titanium or anything.
- 24:58No, no. It's but one of the, the, the
- 25:01tricky things with building it is like right there, there's,
- 25:06there's about 60 something layers of, of prepreg carbon
- 25:10wedged in there and prepreg unique carbon.
- 25:13It's a little bit like a sticky piece of paper that's got spray
- 25:16glue on each side. So you've got to lay it up
- 25:19exactly right. You know, So when we design
- 25:22that, we actually design the layout and the prepaid carbon
- 25:27gets pulled out on a, on a table, vacuumed down and blade
- 25:29cut and it's all labeled from the centre out.
- 25:32Once you actually build your wing to lay out that many layers
- 25:35and not get a, a wrinkle and the carbon is very, very difficult.
- 25:39And if you get a wrinkle on the carbon, the wing just ends up
- 25:42breaking, especially around the the centre here where there's so
- 25:45much. So we worked out some tricky
- 25:48ways of building that so that they didn't, we were able to
- 25:51hold a carbon and straight lines.
- 25:53And that's one of the keys to making this work.
- 25:56That the the the layup that we've done on this the way that
- 25:59we did the layup and what having the unicarbon on the outside has
- 26:02actually given us the confidence to carry on going even further
- 26:06than this without but even more high aspect with our next wings.
- 26:10We were kind of on the limit with us, but when we worked out
- 26:13that laminate and the strength murdered daughter we've we've
- 26:16actually got ideas on where we can go fill up and Matt.
- 26:20If the union gives you so much stiffness, why would you write
- 26:24the union on the search? It is uni inside of it on the
- 26:27outside. Outside, yeah.
- 26:29Just because it's such a thick, chunky wing, it doesn't matter.
- 26:32You don't need it. You probably couldn't even feel
- 26:34a difference on that thickness of wing.
- 26:37Yeah, it's, it's very hard, but the, the UNI, it's a bit messy.
- 26:42And the, the finish on this, if you take it out in the light and
- 26:44hold it in the sun, well, actually the, the, the clear
- 26:47coat on it is 30% black so that you can't actually see what a
- 26:51mess it is. But if you hold it the light,
- 26:53you can actually see the lines of the UNI and stuff.
- 26:57Yeah. So it's, it's harder to build a
- 26:59wing like that, but it's necessary for a wing like that.
- 27:04Not necessary for that. Perfect.
- 27:07Yeah, and you must feel feeding on the outside now.
- 27:10We're playing around with that. They're actually they're of a
- 27:13thickness that we couldn't actually get a benefit from it.
- 27:16Yeah, thank you. Come back in favor you would
- 27:19working on that. Don't you worry if that sort of
- 27:22covers that I'd like to go into the surge.
- 27:24I'll have a bit of a ramble about it and then we'll get Luke
- 27:28who's the things poster boy. So that this is our new surge
- 27:32wing and it took a few goes to get this this right.
- 27:35It's basically similar foil section.
- 27:38So it's really good lift, but not really slow, really good
- 27:41range. We've kind of kept a straight
- 27:44median line in it. I guess the big thing about that
- 27:47is the is the turn down on turn out.
- 27:49I call it the gross mustache effect.
- 27:52And we to Start learning about that.
- 27:55We had our Fireball 1 isn't and I read the five or 1000 with the
- 28:01same outline, same foil section, everything was the same, the
- 28:05same twist. The only thing I changed was the
- 28:07the turn down and the turn up the gross mustache business.
- 28:10And then we tested it back-to-back and it was slightly
- 28:14slower to get up. It was definitely slow at top
- 28:18speed. So if you're building a race
- 28:20foil, you don't want a lot of upsy downsy business in it and
- 28:23you don't want that as that a foil creates lift at 90° to the
- 28:27foil. So if you can imagine a fan, a
- 28:30foil exaggerated turning down a long way and then turning up a
- 28:33long way, you've got your vectors and they end up pointing
- 28:36outwards and then they point inwards.
- 28:38I've exaggerated it just for for a fake.
- 28:40So you end up with vectors that are pointing out and vectors
- 28:44pointing in and these ones are basically argue with each other,
- 28:47which creates drag and it's not a waste of energy.
- 28:52So but and saying that it does make a wing feel narrower.
- 28:56So that thousand span fireball with the gross mustache in it,
- 29:00that actually felt kind of narrower and it actually rolled
- 29:03side to side easier. Part of the reason also for it
- 29:07is that the the tip facing up is less efficient for actually
- 29:10lifting you I think, but it still has water flying over it,
- 29:14so it acts like a smaller wing so it's easier to roll and the
- 29:17water flying over the tips actually creates some stability.
- 29:21It also helps with tip breach and there's some other weird
- 29:24benefits that we sort of ran into and that is having the upsy
- 29:27downsy business. If you were jumping and then
- 29:30trying to land on the foil again with the wing being bent up and
- 29:34down, it seems to give just a millisecond of chance for this
- 29:37to actually get itself together again when it hits the water
- 29:40before the next step. Whereas when it was flat, it's
- 29:42just, it's very hard to land without it crashing.
- 29:46We tried quite a few different versions of The Surge and one of
- 29:48the things that made this one work quite well is if you just
- 29:51look at the bit between my hand there, it's it's actually
- 29:53relatively flat. We did another one that was more
- 29:58of an arc through the middle and with more of an arc, it rolled
- 30:02really well side to side, but when it rolled over, it tended
- 30:05to lock into a turn and that was it.
- 30:06You're sort of stuck with that turn.
- 30:08This one here, it's quite progressive and it feels, it
- 30:12actually feels really like a surfboard.
- 30:14It'll lay over to a turn, but if you're surfing on a wave and
- 30:18looking up at the wave face and you see it breaking over, you
- 30:21could just go straight up and and whack at it.
- 30:23It's freer and easier to turn, doesn't lock into a turn.
- 30:28Tip reaches really well. It's great in white water.
- 30:30If you see the videos of Luke riding, it kind of explains a
- 30:34lot of how good it is with for surfing.
- 30:37Also really good for pumping too.
- 30:38Like Luke is lightweight KG and I saw him pull out of waves that
- 30:43that you know, pump 500 meters out to sea to the next wave and
- 30:48then catch the peak and ride it back in again repeatedly.
- 30:51Like it's it pumps very, very well.
- 30:54The guys actually used it in the dock staff competition and
- 30:57worked really well for that. So very versatile wing.
- 31:00I don't know, probably said too much.
- 31:02Have a go. Here we go.
- 31:04This is Luke. I'm Luke.
- 31:08Yeah. So I've been running the Surge
- 31:09now for just a bit over six months, been doing various comps
- 31:14and riding various conditions. 890 has been my go to pretty
- 31:19much, mainly because there was 2 sizes made to start off with and
- 31:24the rest of the sizes have come rather recently.
- 31:26So the 8:30, I think that will become my next, you know, main,
- 31:30main, prime wing, do it all. But like until then, the eight
- 31:3490s been good for sub paddle power, winging, winging, prone
- 31:39foiling, pretty much anything you can throw at it.
- 31:42They lift super nice, super comfortable.
- 31:44They don't really have that aggressive lift.
- 31:46So it's really nice for particular, you know, for me
- 31:49prone foiling, you get up on a wave, you know it's going to
- 31:51gradually come up and you can engage the foil straight away
- 31:55and kick out to the next wave if you need to or jump straight
- 31:58into turns and just kind of know it's going to be reliable.
- 32:01As Adrian was saying with the upturn wing tips as well as you
- 32:04kind of lay it over, it just gives you that little bit more
- 32:06angle. I think angle of attack as it
- 32:08comes out of the water and so it doesn't re enter so flat and
- 32:11grab bubbles and even looking at videos and things as that kind
- 32:15of wing tip comes back down, you can kind of see the bubbles get
- 32:18to about here and then they just wash off.
- 32:21So that tip breach very, very nicely.
- 32:24And you know, for the 8-9, now I can surf this thing.
- 32:27My old main wing was the 780 Spitfire.
- 32:29I can surf this probably even harder than I could the Spitfire
- 32:32780 and pump it 10 times longer as well.
- 32:36They're really, really impressive wings.
- 32:38And yeah, I've never really looked back after jumping onto
- 32:41these. As Adrian said, the dock
- 32:43starting in Crozon. We'll run the 1010s, Kyle,
- 32:46myself and Bray Bray, yeah, another 100K rider.
- 32:50So we're all running, Yeah, we're all running the 10:10 and
- 32:56yeah, did really well on those. Gray made it to the finals in
- 32:58central pay and I made it to the finals in Kozon.
- 33:02Unfortunately fell on the start and you know, blew my chance.
- 33:05But yeah, they were very super reliable on dock start as well.
- 33:09And I think a lot of the EUR they kind of jumped on said said
- 33:13the same thing, you know, some of the best dock starting wings
- 33:15that they tried. So yeah, really, really
- 33:17friendly. And for me at 100 kilos, like
- 33:19the eight 90s kind of do it all. It packs way above its weight in
- 33:25terms of lift. And then turning side to side
- 33:28tips out. Yeah, all day long, no problems.
- 33:31Is the surge replacing the? The surge is the surge.
- 33:37I'm. Not sure, yeah.
- 33:40It did for me. Yeah, it did for me.
- 33:43I suppose it depends what we want.
- 33:44Like I really like the Spitfires for cot foiling.
- 33:48We do a lot of cot foiling as well.
- 33:49But just having that kind of flat section and a lot of area
- 33:52is kind of nice. You can slow it right down and,
- 33:54you know, do some pretty unique stuff.
- 33:57I haven't actually tried Cot foiling with the surges, but
- 34:00once I jumped on the surge proning I never went back to the
- 34:03Spitfire. Like like a beginner and going
- 34:05to intermediate stage you can just go for.
- 34:08It in terms of lift, like I find the Spitfire sometimes like on
- 34:12the take off or if you get a bit out of control or too much
- 34:15speed, it can really like jump up and lift really aggressively.
- 34:18Whereas this I don't really find that it kind of lifts and you
- 34:21can control it really easily. This is a bit.
- 34:25Poor so I would gather I'm sending video but when you go
- 34:28for a bit of turbulent war model.
- 34:30It's like bubbles or. Really good.
- 34:33You know, foamy shit. Soon becomes.
- 34:35It's a bit more better than the Spitfire.
- 34:37Yeah, the Spitfire feels almost, you know, like you're driving
- 34:39down a gravel Rd. with no suspension and this thing just
- 34:42kind of, it softens you through it.
- 34:45It. Yeah, it deals with turbulence
- 34:48and bubbles and everything. Really.
- 34:50Really. Well, and it's.
- 34:51Like hitting the white water, it was, you know, not guaranteed
- 34:55with the Spitfire on the other wings, but with this one here,
- 34:58pretty much just every single time handles it and lands
- 35:01perfectly. Yeah, it's.
- 35:03A twist down, yes. Isn't so less angle or tough on
- 35:06the tips? It's got the same washout on the
- 35:08tips that all of our other wings have had, so it should be the
- 35:12same with that, but I think it's more to do with gross moustache
- 35:15business. I think just with the angle,
- 35:18like if you imagine the wing continues down this way and you
- 35:21tilt it up, you know, and you tip reach, it's kind of
- 35:24preaching at a flat. And I find any time you come out
- 35:27of and it's too flat, the bubbles are just going to shoot
- 35:29right back to the fuse every time.
- 35:31So just having that extra bit of angle of attack as you come out
- 35:35of the water and coming back in, it just lets those bubbles slide
- 35:38right off. And then even if you are a
- 35:39little bit flatter, I've had multiple videos where it just
- 35:43doesn't really get past that bend.
- 35:44So yeah, super, super, super friendly and just kind of does
- 35:49everything. I I would say there's a lot of,
- 35:52there's a lot of lessons like it.
- 35:54It's kind of logical looking back at it now, like the, the
- 35:56Spitfire, we learned a lot with that for turning, you know, with
- 36:00a straight median line and also the taper that's got quite a bit
- 36:03of chord in the middle and that tapers quite a bit.
- 36:05And we've experimented with that a lot.
- 36:08And the earlier versions of this tempo, it was actually narrower
- 36:11in the middle with a wider tip. And it was actually much harder
- 36:15to to get it to hold together. There's one to snap here all the
- 36:18time. So when she widened the cord in
- 36:20the middle and increased the taper and it made it a lot
- 36:23stronger, made a lot more stable around the center section of the
- 36:26wing, but it also lessened the resistance to roll.
- 36:31So it turns really naturally and easily.
- 36:33It feels really comfortable, right?
- 36:35That's got the same thing. You don't know, Rob.
- 36:37There's all the lessons that we learned in all the various
- 36:39wings, like right through the big dock start wings table
- 36:42carried through to the other wings.
- 36:44All all the lessons seem to crossover.
- 36:47Yeah. Yeah, and I mean in terms of
- 36:49size as well, like Adrian said, like running wingspan is a
- 36:54pretty accurate size comparison. You know if you're looking, if
- 36:58you've been coming off the RV twos, I'd be looking.
- 37:01You know, if you're on the 999, I'd be probably looking towards
- 37:05the 890, maybe the 950, depends on your level and weight.
- 37:10And then, you know, if you're on the 819, probably jumping down
- 37:13to the 8:30, it's probably going to be a good transitions.
- 37:16Like I said, turning off the Spitfire as I was on the 780
- 37:19didn't obviously jump up a little bit, but that's just
- 37:22because what was available. Now there's the 8:30 out.
- 37:24That's what I'm going to be riding mostly.
- 37:26And yeah, pretty, pretty sick. And then paired up with the surf
- 37:31skinnies as well. So my main surf skinnies, the
- 37:33300, I find that pumps really well, pretty much pumps better
- 37:38than the progressives, turn better than the skinnies and
- 37:41turns just as well as the progressives.
- 37:43So, you know, it's kind of for me was that perfect feel and the
- 37:46gap. I never really liked the the
- 37:48skinnies for surfing, just found it drew out the turns too much
- 37:52and you couldn't really, you know, get as maybe radical as
- 37:56you'd like to. Whereas those you know, you're
- 37:58super comfortable to whip it a bit harder and know that you've
- 38:01still got some glide and aren't there if needed too.
- 38:04So. Yeah, it was amazing to watch
- 38:06Luke and surf event in croissant and the judges had come from a
- 38:11follow on surf background are surfing the judges and they were
- 38:14blown away to actually see foiling get to the label where
- 38:17it's fully surfing calming teams rather than in a week anymore.
- 38:22You know there was he was guarding some terms and looking
- 38:26like he was surfing up a surfboard.
- 38:28It was great to see him. And it was, yeah, super
- 38:31comfortable trend. Like as soon as I jumped off the
- 38:33Spitfire to that, it was just at home, you know, felt quicker.
- 38:37So. Look what day would you like to
- 38:40usually? Go the 300 Cerskin, Yeah, yeah.
- 38:44So the 280 I just wanted a little bit more pump.
- 38:47Like for me at my weight, I wanted a little bit more pump
- 38:50and then jumping to the 3:20 I wanted it to be a little bit
- 38:53looser. So 300 was the perfect gap for
- 38:55me. Whereas I know Kai, and I think
- 38:58Perth over here as well, will ride the 280 mainly and then
- 39:01spend you on the 303 twenty. Good time, yeah.
- 39:08Sunny's a big fella and he's used them quite a bit.
- 39:11You've probably got something to say about it.
- 39:13Yeah, I use the 950 quite often, like conditions today for
- 39:16downwinding, like surfboard windows and it was, it was
- 39:19really fun and I was really impressed.
- 39:21I did yesterday, the day before at Port Beach with the 10/10.
- 39:26It was a knee high vans and it was so much fun.
- 39:30It's unbelievable. It's Storm.
- 39:33Air White, Sort of close ish, yeah.
- 39:35Being a surge, what would you equivalent that to in the
- 39:39Spitfire? I almost would say the L and 80
- 39:41from the early lift but it's way far so they from the lifter from
- 39:45the early lift. How to get up?
- 39:47I think it's similar to the. I think it just has more than
- 39:50the 10:30, but I normally wrote the Spitfire 10/30.
- 39:52Yeah, that's why I ride mainly as as.
- 39:55More I get up earlier and the store speed was insane.
- 39:59If you're calling on a bump on the bed and you're almost
- 40:01stolen, you're almost standing. I think it should fall down.
- 40:04You know the front foot pressure and you're going back.
- 40:08It's really fun. Yeah, like also like I had it
- 40:10today on also on the the 1010 my first turn today, I completely
- 40:16breached the whole foil out of the water.
- 40:19He thought I'm falling. I've had a powering in my hand,
- 40:21maybe breached it all push it in lots of water bubbles.
- 40:26I said Oh my God and it should roll out.
- 40:28Unbelievable them now I had something like performance so
- 40:31Spitfire you can bridge like the tail or something like and it
- 40:33pushes in but it has to hold for us all of the wall and push it
- 40:36in on the bottom. It's like yeah, no, nobody
- 40:40reminded me to talk about masks here so we can get talk about
- 40:43masks Yeah. So we've got a bunch of our
- 40:47masks that have been around for a good while.
- 40:49We've got the the 19 mil aluminium and then we did the
- 40:53the power carbon masks and that was in like a normal modulus
- 40:57carbon and then a high modulus carbon.
- 40:59And then we've got the the ultra high modulus carbon mask that
- 41:02we've been building for quite a while.
- 41:04The ultra high modulus one. Well, actually these ones are
- 41:07about 15 mil at the narrows with the first point down through
- 41:12here, the ultra high modulus, they're about 30 1/2 mil through
- 41:17there. Obviously when you make a mask
- 41:19thinner, you're challenging the stiffness of it, but if you can
- 41:23put fancy carbon in there, you can kind of get it back up
- 41:26again. And like the, the ultra high
- 41:28modulus is actually by far the stiffest.
- 41:32And that's actually been a pretty, pretty good reference
- 41:35point for mass for a long while. We've been developing some dock
- 41:39start park wings and they they've got quite big spans.
- 41:42One of them's 1750. So it's a stand wing and the
- 41:49construction that we've worked out with us has been really
- 41:52applicable to make those work as well as you get those biggest
- 41:55span wings, you need to go higher aspect because otherwise
- 42:00the the extra span also just gives you too much drag and it
- 42:04doesn't work. So the 1750 wing is is 20 aspect
- 42:08ratio and the 1500 fireball is 17 aspect ratio.
- 42:13And it's kind of normal for wings like that now seems very
- 42:16high aspect, but that's it's not really now the 1750 to actually
- 42:21control that they give a span of a wing.
- 42:23The ultra high modulus mask was not really quite enough.
- 42:27So we came up with another mask and it is 18.1 mil thick right
- 42:33at the base through here. And we also did the doodad that
- 42:36goes inside the fuselage. We didn't drop that into 15 mil.
- 42:41We left it at 18.1 mil. And we also didn't do it 28 mil
- 42:46deep. We did it 35 mil deep.
- 42:47So there's a lot more intersection to the fuselage.
- 42:50So the the fatty mask, it actually has to be used with the
- 42:54specific fatty black fuselage because it's thicker.
- 42:59It doesn't actually need to be built out of the Oxo Hymodous
- 43:02carbon. So it's not frighteningly
- 43:04expensive, but it is radically stiff.
- 43:07It is a bit draggier. It's only 18.1 more thick, so
- 43:10it's not going to be anywhere near as fast as an ultra pro.
- 43:15But for someone what's Fanny, he's actually got the power push
- 43:18right through that and ignore that.
- 43:20So he's got 1 coming and you, I'm sure you'll hear whether it
- 43:23works for him or not. But when we got that mast,
- 43:25suddenly the 1750 had total control.
- 43:28You were actually able to turn it and steer rather than just
- 43:31trying to attempt to balance on top of your.
- 43:34And so they actually built wings to given that power and still
- 43:37still getting really good control.
- 43:39So I guess historically when people have been buying their
- 43:43foil, they've just looked at the length of the mast and that's
- 43:47it. They haven't considered anything
- 43:49to do with what they're actually what foil they're going to use,
- 43:52what discipline, how much their weight is, what board, what
- 43:55everything. And and I think it's definitely
- 43:58time to start working out what you're trying to do with each
- 44:01mast and suspend. If he's using the Fireball
- 44:04135012 fifteen 1500 wing, you know, he really needs the fatty
- 44:09masked and fuselage. If he's toe foiling on a small
- 44:12wing, the Ultra Pro is going to be absolutely fantastic for him.
- 44:15So it's moving into the next stage where you know to get
- 44:20performance, you can't just have unmasked for your whole range of
- 44:24wings and expect to get performance over there.
- 44:28Is the interface at the other end of the.
- 44:30Fuse to the front floor the. Same on the fatty fuse.
- 44:33No, you have to have a fatty so. You can't use.
- 44:35The you have to have a fatty fuse and a fatty mask.
- 44:38Oh, you mean the other foil, the.
- 44:39Head at the front, it's a black. It's a black, so just a flat.
- 44:42Whatever. Yeah, and it's got the same
- 44:44saddle at the back, so it fits the other, but just remind me of
- 44:47something else, like this tempo setup.
- 44:50We also have this bit here and aluminium with a little saddle
- 44:55on it so that you can bolt your existing rear wings on there.
- 44:59So if you've got into downwind and you know you've got all of
- 45:03your different rear wings there, you could actually just get the
- 45:06cheapo aluminium extension tailpipe and put your rear wing
- 45:11on there and just get the fuselage and front wing until
- 45:13you would get exactly what wing you want.
- 45:15And then this is by far more efficient.
- 45:17But it's just another thing that you can do.
- 45:20Is this very mass same length trimming as?
- 45:22Is 800 and 900 and the 800, the way that we've measured our our
- 45:29mass is like this is 900. So 900 from the surface of the
- 45:33board to the bottom of the fuselage.
- 45:35Some people measure to the to the top of the fuselage or
- 45:39whatever. There isn't really a standard.
- 45:41Yeah, but that's what we chose for.
- 45:43That's just one I know the whole thing.
- 45:45It's a bit. You say set up.
- 45:48Well, it's kind of your drawer. Yes, I can add the often sense
- 45:50of this. Yeah.
- 45:52What masks do you recommend for tempo set up for Dylan?
- 45:58720 ultra Pro is the best that's the that's only 12 1/2 mil at
- 46:05the bottom. We are working on a down one
- 46:07specific mast so that will, it's called a Kiwi and there's,
- 46:12there's a few lifting around at the moment, but they're like any
- 46:15product, we don't actually release it until we're totally,
- 46:17totally happy with it. It's class, but we're still
- 46:20trying to get it. Is it still necessary for
- 46:23lighter riders to have the fortress fro?
- 46:28Mask you think or the Ultra Pro is expensive when we OK another
- 46:33story with that. When we actually started selling
- 46:35the ultra Pro mask, it's made of ultra high modulus carbon and we
- 46:39were the first to actually sell a mask that was ultra high
- 46:41modulus. We built a few just for
- 46:43ourselves and it worked really well.
- 46:45And then we came to a few team writers mail wrote them and you
- 46:48know, after six months or so, none of us would write anything
- 46:52but that. And we're saying, all right, but
- 46:54it's too expensive to sell. So we we kind of didn't push it
- 46:57that hard out. When we finally put it on the
- 47:00market and sold it, we said, look, this is really stiff.
- 47:02It's a great mask, but we didn't actually push it that hard out
- 47:05because it wouldn't want people to feel that they had to buy
- 47:08that or else they couldn't even foil.
- 47:10We just put it out pretty good. Buy it, see it, you might like
- 47:13it. And actually when the first
- 47:15round of people bought it and saw how good it was, that's when
- 47:19the sales actually took off because people just ragged about
- 47:21it, you know, went from there. The stiffer mast you can get,
- 47:25the better it's going to feel. And if you can keep it thin as
- 47:28well, it's it's going to be better.
- 47:30Deal for a heavy black one itself.
- 47:32It's. Yeah, well, it's difficult, but
- 47:34you've actually got so much power you can just go for the
- 47:37fairy mast and just push on through and you won't even
- 47:39notice that drain. I'm happy with my Ulster profile
- 47:42of it. Yeah, and.
- 47:44Then I did one with that but. What size depends on the span of
- 47:48wing that you're using. Like if you're using a 1350 or
- 47:511250 regularly, that's going to be too much for that.
- 47:53No I don't. But if you're using a small span
- 47:56wing, no. I'm not if I should didn't like
- 47:58that. Much So what?
- 47:59Yeah, Seems to me, yeah. That's pretty well mining me in
- 48:02really, you know. Yep, said to me when it was at
- 48:05ten 30s before. Yeah, yeah, yeah, yeah.
- 48:09It's no worries on milk. It's me.
- 48:11You have you have an AD for each one on 9 mil.
- 48:15No, I just got 99. What's the equivalent fuselage
- 48:19length so? This is based, this is based
- 48:21around a standard by the shorts. Sorry, the shorts is 700 mil.
- 48:24That's what everyone was using with the firewall, so we just
- 48:27stuck with that. How much is you like 5 agents
- 48:30coming? I have no idea.
- 48:34It's Saturday. Come on. 5:30. 5:30 it was.
- 48:42Black Friday. Someone asked pricing before and
- 48:50I'd like we sell all over the world and I'd do shop talks all
- 48:52over the world and I'd if you can't remember all the different
- 48:55prices, I can do any technical question but I don't remember
- 48:58prices. If it's on the wall behind.
- 49:00Yeah, no, not yet. The tempo, the tempo, front
- 49:05wing, like it's a little more expensive and the firewall, but
- 49:08not that much. The rear wing, again, it's a
- 49:10little more expensive because there's a bit of fuselage
- 49:12attached to it. The titanium fuselage is not
- 49:14cheap. It's an expensive charge you.
- 49:16Don't have to be titanium, I know it's very cool.
- 49:19What else would you build it out of?
- 49:21As well. I don't know, that's why I'm
- 49:23asking a question. So I assume you experimented
- 49:26with different materials and. So what would you, I mean
- 49:29stainless steel was was twice as heavy carbon.
- 49:34You would have to be fat and that doesn't work.
- 49:36So you kind of sat in a corner with that steel rasis.
- 49:43Aluminium is not strong enough and you can't you can't get as
- 49:47small as that for this. You kind of run out, you know?
- 49:50I tell you what to know, you've seen it first time.
- 49:52It was a pretty fundamental process.
- 49:54Yeah, well, the the details of how it Titans and everything,
- 49:57you know, I'm quite proud of that.
- 49:58It took us a long time to actually get away working nicely
- 50:01and was pretty slick the way that is held together and how
- 50:04how rigid you saw about us. So what were the bending numbers
- 50:09of the fatty mask convened and Pro Ultra?
- 50:11Sorry. When we do our tests, we, we
- 50:14take the mast and we bolt it to the wall and you have to measure
- 50:18the the same mass with the same mass.
- 50:20We bolt it to the wall and we hang 25 kilograms of the end of
- 50:24there. And I actually measure from the
- 50:25ceiling to the trailing edge and see how much it beams.
- 50:29That's what I did at home because it was easy.
- 50:30And we've actually replicated on a proper bending machine in
- 50:34China where they manufacture the mass and the numbers were
- 50:38exactly the same. So it's been a good, I think
- 50:41useful test for us. There's some dispute as a as to
- 50:45whether you should be supporting the mask, you know, between two
- 50:48points and bending it in the middle here, but you know,
- 50:51nothing is quite right as far as bending your mask.
- 50:54But big bolt into the wall and bending it.
- 50:57It gives us a good reference and it kind of relates to how the
- 51:00mast actually feels when you're riding.
- 51:02So going back to how much the benders, like if we use like for
- 51:07like same length mask, it's a 900 mask feet 19 mil aluminium
- 51:13bends, something like 38 mil. The power carbon bends.
- 51:18This is off my head, so it might not be quite right. 38 mil.
- 51:22I think this is about 29 mil for a for a normal power carbon,
- 51:28power carbon high modulus about 23 mil.
- 51:31The Ultra Pro is down to about 19.
- 51:34A fatty mast was 11. So it's not just a little bit
- 51:38different, it's a lot. Yeah, Yeah.
- 51:41It's also got more cord. It's a monster of a mast.
- 51:44Just sort of something else. I don't know how many foil
- 51:47drivers there are. Purer form of a we have a new
- 51:58coil Dr. popper trench pool coming, which is pretty slick as
- 52:01well. And that was quite a cool design
- 52:03the way the the whole unit fits underneath a a covered trench.
- 52:07So it's very clean and nice and we do an integrated mask that
- 52:10goes so that there was an engineering masterpiece.
- 52:12But I can I can totally get the knock that into it and.
- 52:15Didn't they shift the mask forward on the fusion?
- 52:18Does it still fit? Yeah.
- 52:20So we actually did. When I thought about the Fusion,
- 52:22we actually made the fuck it deeper.
- 52:26Yeah. So it actually fits the Fusion.
- 52:27You can get everything in the same place so fast.
- 52:30Yeah, but that that system, like you just loosen the bolts, slide
- 52:34it back, lift it straight out and fire it all, swap your
- 52:37battery over, fuck back in again.
- 52:38So it's very slick and easy to use.
- 52:41And AWSI, that by far was the most looked at, tested, raved
- 52:47about product there. We had the tempo there.
- 52:49People barely recognized it. It was all about the foil drive.
- 52:52Fuck a trench board. So.
- 52:54Can you have you Is there an adapter for the duo tone foil
- 52:57assist for your faults? No, no, don't think it's that
- 53:00much compatibility. Compatibility.
- 53:02Between the user and aluminium mask with as they climb adapters
- 53:06for every major foil brand, yeah.
- 53:09We built adapters for our old aluminium mask to fit pretty
- 53:13much everything and we built a couple of cool shoes that fit
- 53:17over the end of the mast. When we build a shoe that fits
- 53:19code on a shoe that fits lift and we we made the shoe out of
- 53:24titanium because the, the threads back on the code 1, for
- 53:27example, it's only about 6 mil of thread.
- 53:30So there's very little thread and and building an aluminium,
- 53:34you know, when you tighten it up, you're very likely to strip
- 53:37that part of it. The other thing is aluminium
- 53:39cannot touch Gavin. So having an aluminium shoe
- 53:44fitting onto a carbon mast, you know, it was not necessarily a
- 53:47good thing. You're going to get corrosion
- 53:49issues with it. All of our like this surge when
- 53:52we build that, it has two layers of fiberglass around here built
- 53:57in as an isolator. That's why this is sprayed
- 53:59slightly black through here just to disguise that.
- 54:02And that creates an isolation barrier between the fuselage so
- 54:06it doesn't touch the aluminium, doesn't touch the carbon.
- 54:08The same on the end of the mast is fiberglass and that comes
- 54:12down to about there on the mast and actually creates A barrier
- 54:16so that the the carbon doesn't touch the element, the fusion
- 54:19when it goes in the end. That's another thing that we've
- 54:21just done recently too. And that's a NFC tag.
- 54:24And what that is is you point your phone at it.
- 54:28You kind of have to take that cover off your phone to make it
- 54:30work. And you open your phone and then
- 54:33you poke it about the tag and opens up a little thing there
- 54:38and it tells you serial number. It's got, it takes you to the
- 54:44website as well. So it tells you all about the
- 54:45wing and, and you can go and look at the website.
- 54:48It's also got a website where you can go and register your
- 54:50wing. It's got the SKU number, the EA
- 54:53number, the security code to to show you that it's a genuine
- 54:56product. It's not a copy.
- 54:59And you can go online and you can register that.
- 55:01And the idea is that. Sorry, it's a good inhalation.
- 55:07Well, we're just trying to stop. We've had a quite a bit of
- 55:09copying of Chinese companies building fake access stuff.
- 55:12So we stuck that in there to do that.
- 55:15And the idea is to have that on all sorts of products going
- 55:17forward. Yeah, that's where we've got one
- 55:20insulates, I've got case. Just on the fiberglass barrier I
- 55:25noticed I put a shark shield on my frank borne and it corroded
- 55:30right away but I haven't seen that another for Does the frank
- 55:33board have a really thin sand back on the S 7,000,000 S class?
- 55:39It's not just a carbon, it's just colored.
- 55:40Yeah, there's carbon, but there's a layer of bog, white
- 55:43bog, and there's a layer of red and it's, you know, it's pretty
- 55:47much carbon. What's the shark shield made
- 55:49from? I think they they sort of have
- 55:51this stainless steel, but I don't know what grade of
- 55:54stainless steel. Stainless steel should be fine.
- 55:57It's it if it's if it's corroding, it'll be aluminium.
- 56:00Because I'm sure it's going. Oh, really?
- 56:04Yeah, It's interesting. I've seen it on one one of the.
- 56:07So that if it's doing that I've lost, that's just a bad quality
- 56:11stainless steel. So it'd be 304 big 1-6 then
- 56:15that's anyway. So yeah, so you can deal with
- 56:19that. Maybe it's a man So.
- 56:22Good CMR. Like. That's like the.
- 56:29It's interesting because I didn't, it didn't happen on my
- 56:31other board. It's just cum born, yeah.
- 56:35We've got some new Frank boards coming too, like those are the
- 56:38Marcos. Those have been really, really
- 56:40popular. There was a recent poll and a
- 56:42bunch of people voted as a down. One board came out at 32%.
- 56:47I think the Synova came in second place.
- 56:50That was funny, I've put that for a while.
- 56:51Are you just out of there and? I was asking for my mate who's
- 56:54about spin size to what? Yeah.
- 56:58About everyone was just, if you saw how many they were out there
- 57:03last night, yeah. Well, it's all around the world.
- 57:06It's really taken off. That's the the new fuselage and
- 57:11there's some extra things we've done in there to help with
- 57:15corrosion. So in here this is a zinc anode.
- 57:18And if you've got an outboard motor or an inboard motor, you
- 57:22know that they, you have a zinc anode all over your, your motor
- 57:26and once a year or so you, you replace them.
- 57:28So that zinc anode will actually deteriorate over time from the
- 57:32salt water and that deteriorates to protect the rest of the
- 57:36fuselage from corroding. This is main grade aluminium.
- 57:39So it's, it's pretty good. The other thing that we've
- 57:41changed and the recent fuselage is these two front holes and
- 57:44they're not very deep. So we used to get the odd person
- 57:46stripping those two front holes. So we've made a, a, a titanium
- 57:51insert in there. So it's actually a little
- 57:53insert. It's not a heavy coil and it
- 57:55just winds in and has 2 pins either side of it.
- 57:58So you wind it in and then you wipe the pins in and the pins
- 58:01cut through the thread and make it so there's no way you can
- 58:03take it back out again. So the front two holes of
- 58:06titanium and it's got the zinc and I would in it.
- 58:09That's the the newer fuselage. We've modified this quite a few
- 58:12times over the years and you can see the back of it is actually
- 58:15pretty thin and it's quite high. This way when you're when you're
- 58:20pumping this, this is going up and down through the water and
- 58:23this is quite knife like to to cut through the water.
- 58:26Whereas probably the worst things you could have as a a
- 58:29square section or even around sections, a lot of drag off
- 58:33around things going up and down. If you just get around sticking
- 58:36way through the water compared to something like that, it just
- 58:39cuts through the. Water a lot better.
- 58:41It also makes this as thin as you can possibly get it.
- 58:45So it was saves white, but we've added the thickness through here
- 58:47where they they sometimes used to crack through here.
- 58:50So that's a modified black fuselage and I like to think
- 58:54it's actually a pretty sleek looking thing compared to what
- 58:58it's been in the past. Aluminium is actually pretty
- 59:00good It's cost effective and when you have the zinc and the
- 59:03titanium that's in it and build it properly, it lasts pretty
- 59:08well. It's reasonably inexpensive.
- 59:10That's all the screws. Inside so titanium?
- 59:14No, just. The front two, these ones here
- 59:16never really strip out. We could have done those in
- 59:18titanium as well, but it just after the price.
- 59:20So we never really had problems with those.
- 59:23The rear ones, they adjust straight into aluminium and we
- 59:26didn't really strip those and we can't actually because it's so
- 59:29thin through here, we can't actually fit them in there.
- 59:31So still use tough. Always a good idea to use a bit
- 59:35of teeth gel. Who doesn't like sticky nuts
- 59:38away with their hands? I used graphite bristle menu
- 59:43stuff for. Yeah.
- 59:45For eight or nine years since I started Windfoil, I mean.
- 59:47Is it still sticky and horrible? Well, The thing is you get sand
- 59:50like you can just wipe it out. Yeah, it's not stiff.
- 59:52It's not stiff, but it's. I've never had a failure.
- 59:55Yeah, yeah. I've got a question for Luke.
- 59:58When you're not trying to go fast down wind in a straight
- 1:00:01line. Yeah.
- 1:00:02What would you what front wing would you choose between the RV
- 1:00:06twos, the surge, or the speed fires surge?
- 1:00:11Every time, every day of the week, every day of the week.
- 1:00:15Yeah, speed wise, like I think when you match, when you
- 1:00:20actually match the right size for your weight and compared to
- 1:00:23what you've been riding, like I've heard a lot of people, you
- 1:00:26know, they'll compare the 890 to riding the 819-V2 and they're
- 1:00:30like, oh, it's so much slower. It's, it's going to be.
- 1:00:33Whereas when you ride the 8:30 or the new sizes that are coming
- 1:00:37out that more closely match the actual profile and size of that
- 1:00:40wing. Speed wise, they are very
- 1:00:43impressive. They do run quite fast if you
- 1:00:45want them to. But then you also get that low
- 1:00:48swell speed to the line as well. If you run into, you know, run
- 1:00:52up the back of a swell or run yourself into a hole.
- 1:00:56So every day of the week I'm going to choose a surge for
- 1:01:00anything turn related, enter turn related, anything to speed,
- 1:01:03I'm jumping on that. And then, yeah, they're pretty
- 1:01:06much my 22 wings now. So yeah, those are very
- 1:01:11impressive. I think the 1010 and we're
- 1:01:14working on some larger ones as well, I think those will
- 1:01:16actually end up being really, really useful for people that
- 1:01:19are learning to down one just because they're so easy to ride,
- 1:01:23so predictable and they're left really nice tourney surfing
- 1:01:26wings and they just stay up and glide well too.
- 1:01:29How you doing? I've got a question.
- 1:01:31Regarding temple, compared to fireball and normal you know
- 1:01:36stinging tail, what are the angle of the from and tails
- 1:01:40cymos without shims with fireball?
- 1:01:43Yeah. So if you want more lift, you
- 1:01:46you just go to a big area, which is a little bit like shimming,
- 1:01:49positive shimming, but you just do it.
- 1:01:52We tried to keep this as slick as possible, so if you're going
- 1:01:55to have this shimmer bull at the best here, it would involve
- 1:01:57screws and drains, whatever. So just trying to keep this
- 1:02:01totally clean. And it's it's worked very well.
- 1:02:04Rear layer just neutral or layer it?
- 1:02:06Possible. So the front wing is 1° up and
- 1:02:10the back wing is 1 1/2° down. A little difference between the
- 1:02:13front 2 1/2, but that's that's nominal because it's it's
- 1:02:17appropriate to your camber. So if you get a higher camber,
- 1:02:21like for your for your rear, for example, if you had a higher
- 1:02:23camber rear, you can ride it a lot flatter because it's seeing
- 1:02:27force through camera rather than by angle of attack.
- 1:02:30So it's it's balanced and it works nicely as it is.
- 1:02:34It's kind of all you need to know.
- 1:02:36It doesn't necessarily relate to any other four set up and what
- 1:02:40angles they may or may not be writing it because it's balanced
- 1:02:43and it works pretty good. Everyone that hops on this first
- 1:02:46run, like I had a guy in Maui, he was writing another brand and
- 1:02:51we put him on. Actually it was the 920 and a 25
- 1:02:54rear. He had his first ever run on it
- 1:02:56and on his first run he did a personal best straight away.
- 1:03:00He didn't need, he just called the wrong win.
- 1:03:02It's not like he had to have 10 runners to sort of learn how to
- 1:03:04ride it. They're very comfortable and
- 1:03:06easy and intuitive to use.