Latest / eMotors: Electric Revolution / Cooling the Future: Comparing Tesla, GM, and Renault Thermal Management in Electric Vehicles
Transcript
- 0:09Welcome to the debate the limits of electrification.
- 0:14You know how fast an electric vehicle can go, how long it's
- 0:18battery will last and how densely we can pack power into
- 0:22its components? Well, it all really comes down
- 0:25to 1 fundamental challenge, managing heat.
- 0:29We're talking about the crucial thermal management required for
- 0:32the motors, the battery pack and all those high power electronics
- 0:36that make it all run. Exactly.
- 0:38And this intense heat generation, it presents one of
- 0:41the greatest engineering hurdles today, especially as
- 0:43manufacturers push for higher power density and, of course,
- 0:46faster charging speeds. Precisely that necessity frames
- 0:50are essential question for today is the complex multi loop
- 0:54segregated liquid coolant architecture.
- 0:57You know the established approach we saw an early mass
- 0:59market E VS like the Chevrolet Bolt.
- 1:02Is that still the optimal strategy for ensuring long term
- 1:06reliability, or is the future inevitably moving toward the
- 1:10integration of all components under direct oil cooling to
- 1:13maximize thermal performance and power density?
- 1:16I'll be arguing that integrated direct oil cooling is
- 1:20overwhelmingly superior. By putting the thermal focus
- 1:23directly on the motor, which is, let's face it, the main heat
- 1:26generator besides the battery, we really open the door to
- 1:29higher power density and ultimately simpler, more
- 1:32efficient electric drive units in the long.
- 1:34Run and I'll be defending the philosophy of segregation.
- 1:37My position is that having separate specialized cooling
- 1:40systems is frankly essential for robust reliability and component
- 1:45specific thermal optimization across the entire vehicle
- 1:49ecosystem, especially when dealing with the high demands of
- 1:52the battery and those sensitive power electronics.
- 1:55OK, I see why you think that, especially focusing on, let's
- 1:58say historical reliability. But let me give you a different
- 2:01perspective, starting right at the heart of the problem, the
- 2:04motor itself. Advances in dielectric fluids
- 2:07and highly targeted cooling techniques have demonstrated
- 2:10that the traditional external liquid jacket, where water or
- 2:14coolant flows around the outside of the motor casing is becoming,
- 2:17well, kind of obsolete for truly high performance applications.
- 2:21That's an interesting point, but we really must consider the
- 2:24vehicle as a complete system, not just the motor in isolation.
- 2:29When we look at designs like the Bolt EV, the engineering
- 2:32philosophy, it's sort of demands separate cooling because the
- 2:36components have vastly different, sometimes even
- 2:38contradictory thermal needs. For instance, the electronics
- 2:43loop. It has to manage crucial
- 2:45sensitive power electronics like the main inverter, that's the
- 2:49SIPM or single power inverter module, the charging modules and
- 2:53the Dr. unit. This loop is a relatively low
- 2:56pressure system using a conventional radiator to reject
- 2:59heat into the air. It's designed specifically to
- 3:02keep those silicon heavy components below their safe
- 3:05operating limit. Right, but that sounds like a
- 3:08complex web of hoses and pumps, doesn't it?
- 3:11Just, you know, increasing potential failure points.
- 3:14It is complex, yes, I won't deny that.
- 3:17But that separation is a crucial safeguard.
- 3:20It prevents thermal cross contamination.
- 3:22Now consider the battery pack loop.
- 3:25It is entirely separate, and it's critical because the
- 3:28battery doesn't just need cooling.
- 3:30It often needs heating to reach its optimal operating
- 3:33temperature, particularly when fast charging or driving in cold
- 3:37weather. That loop utilizes the AC
- 3:40system, the compressor, the condenser, the R1234YF
- 3:46refrigerant, and special Poe oil.
- 3:49The system is designed to handle massive thermal events.
- 3:52I mean, just for example, the battery coolant heater draws a
- 3:56full 2000 watts just to warm the cells up until they hit about
- 4:01what, 65°F or 18.3 Celsius? You simply cannot allow the
- 4:06intense, rapidly fluctuating Dr. heat from the motor to
- 4:09immediately influence the battery's delicate optimal
- 4:11temperature range. The battery system requires
- 4:14phase change cooling using that refrigerant, which is a
- 4:18fundamentally different kind of problem entirely.
- 4:20OK, I respect the robustness of that segregated architecture for
- 4:24battery protection, I really do. But my core thesis centers on
- 4:28maximizing the motors potential. If we focus the cooling
- 4:31precisely where the heat is generated, you know, inside the
- 4:34windings in the rotor, we achieve efficiency and power
- 4:37density gains that the indirect external liquid jacket system
- 4:41simply cannot match. Numerical simulations like those
- 4:44conducted by Total Energies and Engine Soft have consistently
- 4:47demonstrated the superiority of direct oil cooling over
- 4:50traditional indirect water cooling.
- 4:52Superiority is a strong claim. What are the concrete
- 4:56quantifiable gains you're seeing in that research that would
- 4:59justify abandoning segregation for the motor?
- 5:02Well, the data is remarkably clear and honestly compelling.
- 5:06Using direct oil jets, which can spray dielectric fluid directly
- 5:10onto critical areas like the coils and magnets, achieved an
- 5:13average winding temperature that was at least 14°C lower than the
- 5:17external water jacket system. That is a significant reduction
- 5:20in thermal stress right there. 14° OK.
- 5:24And when running the motor at very high speeds, say 10,000
- 5:27revolutions per minute, that difference became staggering up
- 5:30to 40°C lower. This superior thermal
- 5:34management, according to the research, directly opens the way
- 5:37to higher power densities for the future generations of E
- 5:40motors. And furthermore, by using oil,
- 5:43we can combine motor cooling and transmission lubrication into a
- 5:46single fluid, simplifying the overall electric Dr. unit design
- 5:49quite dramatically. OK, I'll grant you the point on
- 5:52the motor, the data for direct cooling is compelling.
- 5:56But when we look at the whole picture, the real challenge
- 5:58isn't just the motor, it's managing the system's complete
- 6:02thermal footprint. But hold on, you sighted that
- 6:05incredible 40° delta at high speeds.
- 6:08How can a segregated indirect system which relies on an
- 6:11external jacket possibly justify accepting that level of thermal
- 6:15compromise on the single most critical heat generator?
- 6:18I mean, temperature control for components like permanent
- 6:20magnets is absolutely pivotal for maintaining peak performance
- 6:24and avoiding demagnetization overtime.
- 6:26The simulation showed that by optimizing the oil's physical
- 6:29properties, they can achieve a 5.4°C reduction in the magnet
- 6:33temperature alone. That is precise component level
- 6:36protection that indirect cooling simply cannot deliver.
- 6:40That is true, and I concede that for highly localized heat
- 6:44extraction from the motor components, direct oil cooling
- 6:48is demonstrably superior. But the multi loop system
- 6:53manages the entire vehicles thermal environment which
- 6:56involves complex, sometimes divergent needs.
- 6:59The Bolts design ensures dedicated thermal control for
- 7:02the battery via that sophisticated AC chiller and
- 7:06refrigerant system which handles function specific to battery
- 7:09chemistry, like rapid heating and intensive phase change
- 7:12cooling during DC fast charging. That is a fundamentally
- 7:16different task than simply rejecting motor heat.
- 7:20Even with an oil cooled motor, that hot oil must still be
- 7:24routed through a complex heat exchanger or radiator condenser
- 7:27system to reject that heat into the environment.
- 7:30So you reduce complexity in the motor casing perhaps, but the
- 7:34complexity remains elsewhere in the vehicle to manage the
- 7:36battery's unique demands. That line of argument, however,
- 7:40it's sort of shifts the discussion away from maximizing
- 7:43motor performance, which directly impacts the user
- 7:46experience and the vehicle's capability.
- 7:49The trade off you are defending involves accepting inferior
- 7:52motor temperatures for the sake of what you term segregation and
- 7:56system protection. Well, let's.
- 7:58Talk about the cost of that thermal precision then high
- 8:00precision actively pumped oil systems such as the one used by
- 8:04Tesla. They come with tangible
- 8:05engineering costs, increased mechanical complexity in the
- 8:08pump apparatus, higher production costs, and a real
- 8:11compromise on energy efficiency due to the parasitic load.
- 8:15That system, as noted, demands additional electrical power to
- 8:18run the oil, umm, slightly compromising the motor's
- 8:21inherent efficiency advantages. For a mass market vehicle
- 8:24reliability often correlates with simplicity, and active oil
- 8:27pumping definitely complicates things.
- 8:29That's a compelling argument against high pressure active
- 8:32systems, I agree. But if you consider that oil
- 8:34cooling doesn't have to be high tech or high energy draw,
- 8:38General Motors interestingly employs a simpler gravity fed
- 8:42passive oil cooling system in some of their drive units.
- 8:45Ah yes, the passive system. Exactly.
- 8:49This is an inherently simple, economical mechanical solution
- 8:53that consumes very little energy.
- 8:54Because it eliminates the active pumping mechanisms entirely.
- 8:58It shows that the complexity and energy costs associated with the
- 9:01pump are not inherent defects of oil cooling itself, but rather a
- 9:05choice in design, active versus passive.
- 9:07That choice highlights the issue though, doesn't it?
- 9:10GM prioritized simplicity and low energy draw, but that
- 9:14passive system is most effective at high speeds when the oil is
- 9:18naturally flung onto the rotor and windings and low speed
- 9:22traffic or slow driving conditions.
- 9:25That circulation is inconsistent, potentially
- 9:28compromising thermal management just when component sensitivity
- 9:32might be highest in stop and go driving.
- 9:35This inconsistency is precisely what the robustness of a
- 9:38dedicated pumped liquid loop seeks to avoid.
- 9:42You're right that active systems offer consistent performance
- 9:45across the full speed range, but we also see middle ground
- 9:49solutions that try to bridge the gap.
- 9:51Renault, for example, utilizes A pragmatic liquid cooled pumped
- 9:55solution that cools the motor, battery and principal components
- 9:59uniformly through a less aggressive liquid path.
- 10:03Now while this doesn't achieve the highly targeted cooling of
- 10:05say, oil jets, it does balance effectiveness, simplicity and
- 10:10cost, which suggests that the indirect liquid path isn't
- 10:13strictly outdated. It's just perhaps a less
- 10:16performance focused compromise compared to the direct oil
- 10:19approach. I suppose I come at it from a
- 10:21different angle. If we look at the trajectory of
- 10:24design philosophy, the movement toward tightly integrated
- 10:27electric drive units, you know, E motors coupled directly with
- 10:31transmissions that naturally favors oil cooling.
- 10:35Why? Because the single dielectric
- 10:37fluid can efficiently handle both the required gear
- 10:40lubrication and the extremely high thermal demands of the
- 10:44motor core simultaneously. This consolidation seems like a
- 10:48crucial future trend. Exactly.
- 10:51This consolidation maximizes power density while simplifying
- 10:55the overall mechanical structure, making the whole Dr.
- 10:57unit smaller and lighter. It seems almost inevitable for
- 11:01performance vehicles, doesn't it?
- 11:02But complexity is often necessary, not a defect, when
- 11:06guaranteeing thermal protection across highly sensitive
- 11:10expensive non motor electronics like that single power inverter
- 11:14module or the DC DC converter. A less targeted liquid system,
- 11:18even a sophisticated pumped 1 like Renault's, arguably carries
- 11:22a slightly higher risk in intense or extreme use cases
- 11:25compared to the ultra precise actively pumped systems like
- 11:29Tesla's, or indeed the inherent robustness of GM dedicated
- 11:33segregated architecture for those specific electrical
- 11:36components. When components fail due to
- 11:38thermal runaway, the costs are substantial, often requiring
- 11:42full Dr. unit replacement. Segregation is fundamentally a
- 11:47design safeguard against cascading thermal failures.
- 11:50But the oil cooling methodology, particularly the precise
- 11:53targeted approach, is arguably a superior safeguard for the motor
- 11:57itself, which is where the bulk of the power loss and intense
- 12:01heat actually resides. By tackling the motor's heat
- 12:04aggressively, you know, removing that potential 40°C excess, you
- 12:08drastically reduce the thermal burden on the rest of the
- 12:11system. This allows the heat exchangers
- 12:13that handle the general electronics to operate much more
- 12:16easily under less stress. But you still must maintain a
- 12:19separate highly efficient system to manage the battery during DC
- 12:24fast charging, which is perhaps the most aggressive thermal
- 12:28event the vehicle regularly experiences.
- 12:31We are still left with two separate thermal control
- 12:34objectives. High precision motor cooling
- 12:36versus application specific battery thermal regulation.
- 12:40The multi loop segregated system, even if maybe less
- 12:44efficient for the motor and isolation, ensures that both
- 12:47objectives are met without compromising the other
- 12:50components unique needs. The massive thermal performance
- 12:53gains are absolutely justified, especially when considering the
- 12:57engineering push toward future power density.
- 13:00The energy spent running high pressure pumps or the
- 13:03engineering effort required to manage inconsistent passive
- 13:07flows is, I believe, outweighed by the ability to achieve
- 13:11smaller, more powerful E motors that fundamentally change the
- 13:15vehicle's performance envelope. And I maintain that the inherent
- 13:18complexity of specialized thermal needs, specifically the
- 13:21requirements for battery heating, sustained fast
- 13:24charging, and the precise temperature limits of passive
- 13:27electronics, necessitates dedicated separate loops to
- 13:31guarantee stability and prevent cascading failures across the
- 13:35vehicle's entire operational range.
- 13:37The trade off in motor efficiency is, I think,
- 13:40acceptable when weighed against overall system robustness.
- 13:44It is fascinating though to see these two distinct engineering
- 13:48philosophies, 1 focused on protection and segregation, the
- 13:51other focused on thermal performance and integration,
- 13:54really defining the technology of thermal Management Today.
- 13:57Absolutely O to summarize my position for comprehensive
- 14:02reliability and managing those diverse operational demands,
- 14:06separate and specialized liquid coolant loop provide the
- 14:08necessary layer of robust application specific thermal
- 14:12safety. The complexity is in effect the
- 14:15cost of achieving absolute certainty across all vehicle
- 14:18functions from charging to high speed driving.
- 14:21Conversely, the quantitative thermal advantages of direct oil
- 14:25cooling, lower component temperatures, protection for
- 14:28critical permanent magnets, and enabling significantly higher
- 14:32power density signal that this integrated architecture is the
- 14:35definitive solution for maximizing performance in future
- 14:39EV motors. It's pushing the industry away
- 14:41from reliance on indirect liquid jackets.
- 14:44The difference between the pragmatic multi loop liquid
- 14:47systems of many current EVs and integrated high performance oil
- 14:51cooling systems potentially for tomorrow really highlights that
- 14:54this critical optimization pathway is still an open and
- 14:58evolving question for the industry.
- 15:00Indeed, the focus remains firmly on how best to dissipate heat
- 15:04without sacrificing efficiency, longevity or performance.
- 15:08It's a key battleground for EV development.
- 15:11Thank you for joining us for this in depth exchange on
- 15:13thermal management strategies. We hope this was clear and
- 15:16insightful. We encourage you to follow our
- 15:18channel so you don't miss our next discussions on the deepest
- 15:21technical issues facing electrification.
- 15:24Goodbye for now.