Latest / 5 Minute UX / Research Market Rates Before Setting Project Prices
Transcript
- 0:08This lesson is Research Market Rates Before Setting Project
- 0:11Prices. Let's get started.
- 0:18The first move is to locate concrete data that anchors your
- 0:20proposed pricing to reality. You need to compare your instincts
- 0:23against what the industry actually pays. The Information
- 0:26Architecture Institute publishes salary surveys that give you a
- 0:28baseline for the field. AIGA provides contractor rate data,
- 0:31which is specifically useful for comparing against your own
- 0:33freelance or project-based pricing. Beyond those two, you
- 0:36have additional benchmarks to cross-reference. Coroflot and
- 0:38Aquent both offer rate data that helps you see how the market
- 0:41values specific skill sets and experience levels. When you pull
- 0:44numbers from these four sources, you are building a factual
- 0:46foundation. This prevents you from guessing and ensures your
- 0:49rate reflects current market standards. Once you have these
- 0:52external data points, you can begin synthesizing a fair
- 0:54pricing input. The goal is to move from vague estimates to
- 0:56defensible numbers. This data collection step is the critical
- 0:59first layer of your pricing strategy.
- 1:06Once you have the market data, synthesize it with two other
- 1:09critical inputs to find your rate. The first input is your
- 1:12own level of experience, which anchors your value against the
- 1:15market. The second is what others in your specific market
- 1:17are charging, a direct comparison to your peers. The
- 1:20third input is what you personally feel is somewhat
- 1:22fair, balancing objective data with professional intuition.
- 1:25This synthesis creates a stable baseline for your pricing. You
- 1:28are not just guessing a number, but building a defensible rate.
- 1:30The goal is to arrive at a figure that respects your skill
- 1:33while remaining competitive. However, you must also apply the
- 1:36lower, don't raise principle. This rule exists because it is
- 1:39significantly harder to ask a client to pay more after they
- 1:41see specific numbers. You can always lower a rate to win a
- 1:44deal, but raising it later is often impossible. Therefore,
- 1:47your initial quote needs enough buffer to prevent any need for
- 1:50upward revision. With your rate synthesized and buffered, the
- 1:52next step is estimating the total time required for the
- 1:55project.
- 2:01Say you’re scoping a mid-sized interface redesign for a local
- 2:04health system. You’ve already pulled the market data, weighed
- 2:06your own experience level, and settled on what feels somewhat
- 2:09fair for the work. Now you need to turn that judgment into a
- 2:12specific number on the page. The calculation follows a tight
- 2:14sequence, and getting the order right is what keeps the quote
- 2:17defensible. The first move is to estimate the total duration
- 2:20of the project, and you do that by naming a specific number of
- 2:23revisions you’ll commit to delivering. This isn’t a vague
- 2:25promise to iterate until the client is happy; it’s a finite
- 2:28block of time tied to a defined number of feedback loops. That
- 2:30duration becomes your base, and everything else hangs off it.
- 2:33Next, you account for project management, which the source
- 2:36pegs at around twenty-five percent of the total time. That
- 2:38overhead covers the scheduling, the client check-ins, the scope
- 2:41tracking, and the administrative glue that keeps the work moving.
- 2:44If you don’t build it in, you’re paying for it out of your own
- 2:47pocket while the client sees the same final number. So you take
- 2:49that base duration, add the management buffer, and you now
- 2:52have your true estimated hours. The third step is to determine
- 2:55the hourly billable rate to charge, which is where your
- 2:57market research, your experience level, and your sense of
- 3:00fairness come together. You’re not pulling a number out of thin
- 3:03air; you’re anchoring it to what the field is actually paying and
- 3:05where you sit within that range. This rate is the multiplier that
- 3:08turns hours into money. Finally, you multiply the
- 3:10estimated hours, now including both revisions and management
- 3:13overhead, by that hourly rate to calculate the total. That
- 3:16product is the number you put in front of the client. And because
- 3:19it’s always easier to lower a rate than to raise one after the
- 3:21fact, that total should carry enough buffer that you never
- 3:24have to ask for more once the client has seen it.
- 3:32You have your base rate and your hours. Now you adjust for
- 3:35reality. Start by applying degrees of difficulty to
- 3:37specific project portions. A complex information architecture
- 3:40audit isn't billed the same as a simple style guide. This creates
- 3:43a cost range that reflects the actual cognitive load of the
- 3:46work. Next, consider compensatory rates. If this
- 3:48project blocks you from taking on higher-value work, bill a
- 3:51slightly increased rate. This offsets the potentially lost
- 3:53future revenue while you stay busy with lower-tier tasks.
- 3:56Licensing changes the math entirely. When you retain
- 3:59copyright but grant distribution rights, you’re selling access,
- 4:01not just labor. Stipulations in the agreement directly affect
- 4:04how the work is valued and billed. Finally, lean on
- 4:07experience. In most cases, experience is the key factor in
- 4:10appropriately estimating projects from a time-and-
- 4:12materials perspective. Your judgment is what calibrates all
- 4:15three adjustments above. So when you sit down to quote that
- 4:17next project, you’re not just guessing. You’re weighing
- 4:20difficulty, opportunity cost, and rights. That’s how you land
- 4:23on a number that holds.
- 4:27Welcome to The Take. I'm joined by a fellow practitioner and
- 4:30together we're going to dig into Research Market Rates Before
- 4:33Setting Project Prices — what it means in practice and what's
- 4:36worth remembering.
- 4:38[HOST] The twenty-five percent management buffer is the part
- 4:41that usually kills new freelancers. Most of us think
- 4:44that time is free because we are the ones doing the scheduling.
- 4:47[LEARNER] It feels like a theft of my own time, honestly. I
- 4:50spent the first two years eating those hours just to keep the
- 4:53client happy. [HOST] That's exactly why the rate has to
- 4:56absorb it upfront. If you don't bill it, you're subsidizing the
- 5:00client's administrative chaos with your own unpaid labor.
- 5:03[LEARNER] True, but it makes the final quote look inflated. I
- 5:06always worry the client will just see the high number and
- 5:09walk away. [HOST] That's where the lower don't raise principle
- 5:12comes in. You build the buffer in, then offer a discount to
- 5:15close the deal. [LEARNER] So I quote the high number, then drop
- 5:19it slightly to win their trust. It feels like a trick, but it
- 5:22actually protects my margin. [HOST] It's a structural
- 5:25defense, not a trick. You're trading flexibility for
- 5:27stability, and the client gets a sense of value. [LEARNER] I like
- 5:31that framing. It stops me from feeling like I'm negotiating
- 5:34against myself. [HOST] Speaking of value, have you tried using
- 5:37AI to help scope those revision loops? [LEARNER] I use it to
- 5:41draft the initial feedback summaries, which saves me hours
- 5:44of reading through messy client comments. [HOST] That's a smart
- 5:47application. It reduces the cognitive load on the management
- 5:50side, which means that twenty- five percent buffer might
- 5:53actually shrink. [LEARNER] Wait, if AI handles the administrative
- 5:56glue, do I still need to bill that full overhead? [HOST]
- 5:59Careful. The time you save is real, but the complexity of the
- 6:03UX work often increases as clients expect faster iteration.
- 6:06[LEARNER] So I'm saving time on admin but losing time on deeper
- 6:09design thinking. The math is trickier than I thought. [HOST]
- 6:12Exactly. The buffer protects you from the unknown, not just the
- 6:16known. [LEARNER] I need to stop treating the buffer as a fixed
- 6:19cost and start seeing it as a risk variable. [HOST] That's the
- 6:22right mental model. Your rate should flex with the
- 6:25unpredictability of the client, not just the hours on the clock.
- 6:28[LEARNER] I'll go back and re- scope that health system project
- 6:32with that lens. [HOST] Do that. And remember, the data anchors
- 6:35you, but your judgment calibrates the final number.