Latest / FE exam in the car / FE Exam: Friction and Inclined Planes — Forces, Angles, and Equilibrium
Transcript
- 0:01Speaker 1: Don't worry, we're back. Sorry for the delay. Today we're
- 0:04Speaker 1: going to be talking about friction and inclined planes, which
- 0:07Speaker 1: are common applications of statics on the fundamentals of engineering.
- 0:11Speaker 1: So you have a heavy crate resting on a ramp.
- 0:13Speaker 1: The ramp is tilted at 20 degrees and the crate
- 0:15Speaker 1: isn't moving. Why doesn't it slide, you ask? The answer
- 0:18Speaker 1: involves three forces. Gravity, the normal force, and friction. Understanding
- 0:22Speaker 1: how these forces interact is essential for solving inclined plane
- 0:25Speaker 1: problems on the FE exam. Let's begin with gravity. Gravity.
- 0:29Speaker 1: The weight of an object always acts vertically downward, but
- 0:31Speaker 1: when an object rests on an inclined surface, it's useful
- 0:35Speaker 1: to divide that weight into two components. The first acts
- 0:38Speaker 1: parallel to the ramp, pulling the object downhill. The second
- 0:41Speaker 1: acts perpendicular to the ramp, pressing the object against the surface.
- 0:46Speaker 1: If the ramp makes an angle theta with the horizontal,
- 0:48Speaker 1: the parallel component equals the object's weight multiplied by the
- 0:52Speaker 1: sine of theta. The perpendicular component equals the weight multiplied
- 0:56Speaker 1: by the cosine of theta. Sine gives us the downhill component.
- 1:01Speaker 1: Cosine gives us the perpendicular component. For a block on
- 1:05Speaker 1: a ramp with no additional forces acting perpendicular to the surface,
- 1:10Speaker 1: the normal force equals the weight multiplied by the cosine
- 1:13Speaker 1: of theta. So let's talk about friction now. Friction resists
- 1:16Speaker 1: relative motion or the tendency toward relative motion between two
- 1:19Speaker 1: contacting surfaces. Two types you need to know. Static friction
- 1:24Speaker 1: acts when the surface are not sliding relative to one another.
- 1:26Speaker 1: Its magnitude adjusts as needed to maintain equilibrium up to
- 1:29Speaker 1: a maximum value. That maximum equals the coefficient of static
- 1:33Speaker 1: friction multiplied by the normal force. The other one is
- 1:37Speaker 1: kinetic friction, which acts when the surface are sliding. Its
- 1:40Speaker 1: magnitude is modeled as the coefficient of kinetic friction multiplied
- 1:43Speaker 1: by the normal force. A common mistake is students sometimes
- 1:47Speaker 1: assume static friction always equals maximum value, but it doesn't.
- 1:51Speaker 1: Static friction only reaches that maximum when the object is
- 1:54Speaker 1: on the verge of slipping. Let me give you an example.
- 1:57Speaker 1: You have a 100-kilogram crate resting on a 20-degree incline.
- 2:03Speaker 1: The coefficient of static friction is 0.4. Will the crate slide? First,
- 2:08Speaker 1: calculate the weight. Mass multiplied by gravitational acceleration gives 981 newtons.
- 2:15Speaker 1: Then you calculate the downhill force. 981 multiplied by the
- 2:19Speaker 1: sine of 20 degrees gives approximately 336 newtons. Now calculate
- 2:25Speaker 1: the number of force. 981 multiplied by the cosine of
- 2:28Speaker 1: 20 degrees gives approximately 922 newtons. Maximum static friction equals 0.4
- 2:36Speaker 1: multiplied by 922. That's approximately 369 newtons. Compare the two forces.
- 2:42Speaker 1: Gravity pulls the crate downhill. With 336 newtons, static friction
- 2:48Speaker 1: can resist up to 369. Because the available friction exceeds
- 2:52Speaker 1: the downhill force, the crate will remain stationary. The actual
- 2:57Speaker 1: friction force is 336 newtons, not 369. So if you
- 3:03Speaker 1: imagine yourself increasing the ramp angle, eventually the downhill component
- 3:07Speaker 1: becomes too large for static friction even to resist. At
- 3:10Speaker 1: the critical angle, the tangent of theta equals the coefficient
- 3:13Speaker 1: of static friction assuming no other force is applied. With
- 3:17Speaker 1: a coefficient of 0.4, that critical angle is approximately 21.8 degrees.
- 3:23Speaker 1: Always draw a free body diagram before selecting equations. Always
- 3:27Speaker 1: resolve forces parallel and perpendicular to the incline, and make
- 3:30Speaker 1: sure to distinguish the actual static friction force from its
- 3:34Speaker 1: maximum possible value. Central lesson is, friction does not automatically
- 3:39Speaker 1: prevent motion. It prevents motion only when the required resisting
- 3:42Speaker 1: force is within its available limit.