Latest / Drawn West / Why 2nd and 3rd Axis Matter | Bridge-Lock Bonus Series
Transcript
- 0:00One tag, one week, one shot to make count.
- 0:04This is for the hunters who hit the road and get after it no
- 0:07matter the odds. This is drawn West.
- 0:21Welcome back to another Bridge Lock bonus episode of the Drawn
- 0:24W podcast. If you're listening to this
- 0:26live, there's still time to get signed up so you can win a boat
- 0:31just like this Lyft X. You can get signed up at Get
- 0:35Drawn w.com/giveaway. We're going to be releasing a
- 0:38bonus code word later on in this episode.
- 0:41When you hear that code word, e-mail it in and you're going to
- 0:45get 20 extra entries to win a Lift X just like mine.
- 0:49But today we are going to be taking the next step in setting
- 0:52up your bow. The last episode we went through
- 0:54getting all of the components unboxed.
- 0:57We brought this over to Full Draw Archery here in Stacy, MN
- 1:01and they got everything set up and now we're going to work on
- 1:04these first couple steps. The tools we're going to use
- 1:06today is if you're listening to this online, there is a video
- 1:10version of this as well where you can see what we're doing.
- 1:13But we picked up a little archery level sets.
- 1:17We got an arrow leveler and a string leveler off of Lancaster
- 1:20Archery. We're also going to be using the
- 1:22Baker Archery Products bovice. I just installed this bovice
- 1:26here for folks on the camera. You can see there's just a knob
- 1:29and a swivel. Pretty nice bow vise, very good
- 1:33for home use. This isn't the same bow vise
- 1:35you'd use in a shop because in a shop you're going to want the
- 1:39micro adjust. But for at home you got a little
- 1:42bit more time. You don't have to be so critical
- 1:44on like how fast you're doing everything.
- 1:46It just takes a second longer. So we're going to get the bow,
- 1:49we're going to get our bow in the vise here quickly with this
- 1:53Baker Archery vise. I'm going to be clamping on.
- 1:56That's got some padded jaws. And so I'm just going to clamp
- 2:00on right down here. You can probably hear the vice
- 2:02in the background right on my grip.
- 2:05Just snug it in there so it's solid and stable and not moving.
- 2:13And I think we got it pretty good right there.
- 2:17So the first thing we're going to level is our arrow rest.
- 2:22So what we're talking about here, folks, is when your
- 2:26arrow's on the rest, and I have this IMX drop away integrate,
- 2:33you want to make sure your arrow is perpendicular to your string.
- 2:36So perfect 90° angles if you will.
- 2:39And so we want to test this and make sure we set the height of
- 2:42our rest right off the bat before we get into shooting and
- 2:46doing a bunch of other stuff. We want to make sure our rest is
- 2:49square and the vert, the height is of kind of a vertical
- 2:53assessment. We can do left and right later,
- 2:55and we're going to do that in the next episode probably on how
- 2:58you set your left and right adjustment for right now we're
- 3:00setting our up and down, and to do that we got to start with a
- 3:03level bow. So we're going to take the arrow
- 3:05out of here. We're going to snap on this
- 3:08string leveler. It's a 2 axis string gauge, so
- 3:12I'm just going to snap it on to hit the serving here so it gets
- 3:16a nice solid rest. So we got that snapped on.
- 3:19We're going to level our Baker Archery level, so I'm just
- 3:23looking at both site gauges, trying to get them both in the
- 3:30same spot. It's kind of tricky to talk and
- 3:34do this step at the same time, but I got her pretty close
- 3:37there. Lock it in, double check.
- 3:41I got the front and back of the bow perfect.
- 3:45My left and my right's a little bit off.
- 3:47So I'm just going to take this and adjust it a little bit to
- 3:52try to lock in that left and right a little bit better.
- 3:56And now our left and right, our tilt is perfect, our front and
- 4:01back tilt is perfect. And so we're going to pop that
- 4:04off so we can put our string back on or our arrow back on the
- 4:09string. So we got the arrow on and we're
- 4:11going to flip up the rest. So two couple things to keep in
- 4:16mind when you're going to be leveling your arrow rest #1 if
- 4:20you have a drop away, when you click it up, it's most of the
- 4:23way up. But when you're at full draw, it
- 4:26goes up a little bit taller. I don't know if folks can see
- 4:29that on the call, but when you're when that cable driven,
- 4:31it's either cable driven or limb driven, but either way it's
- 4:34going to stand up just a little bit taller when it's at full
- 4:37draw. So when you're testing, you want
- 4:39to make sure you test with that all the way back with that cable
- 4:43type. The other thing, this might not
- 4:46apply to everyone, but I shoot a micro diameter arrow.
- 4:49So I have an Outsert so that I can shoot standard diameter
- 4:54field points, broadheads, all that jazz.
- 4:57But a micro diameter arrow. So my Outsert is about inch and
- 5:00a half long and it's wider. So you also need to make sure if
- 5:03you have a shorter arrow for your draw length and you have an
- 5:08out cert, that out cert could adjust how high your arrow sits
- 5:12on the rest. When you're at full draw, that
- 5:15arrow could slide back onto your rest and then that out cert
- 5:19slides onto your rest and lifts your arrow up a little bit as
- 5:21well. So if that's you best way to do
- 5:24that, just the next time you're shooting your bow, just draw
- 5:26back, put an arrow on it, aim at a target and then just kind of
- 5:29look and see if you have an out cert.
- 5:30Is it hitting your rest or not? I know my arrows are long enough
- 5:34that they do not hit the rest. They stop about 1/2 inch to an
- 5:39inch in front of the rest. So I can do it without having to
- 5:43worry about the height of my outsert.
- 5:45So my bow is level. I'm going to snap on this little
- 5:50arrow leveler. It just comes with a little
- 5:51string. Snap that on and right now my
- 5:55bubble is to the back, which means my rest is not high
- 6:00enough. So and take an Allen wrench,
- 6:03we're going to just loosen up a little bit on our the lock on
- 6:11our rest. So we're just going to pop this
- 6:16loose just a little bit to get started.
- 6:19And then my arrow rest has a little knob that has an up down
- 6:25micro address. So I'm going to tighten this
- 6:28cable all the way up and then I'm going to adjust my micro
- 6:36adjust until that bubble comes into the middle.
- 6:44All right, so I think we got it adjusted all the way.
- 6:48Now I just got to double check our level a little bit.
- 6:53Our bow did come off level a little bit during this
- 6:57adjustments. That's one thing you always want
- 6:58to double check when you're doing these adjustments.
- 7:03Always check your level before and after.
- 7:08So now we got a perfect level again on our bow.
- 7:13Our knock is a little high still and we've maxed out the the
- 7:18total rise of our rest. And so I would probably say the
- 7:23next time I'm at the shop, I might want to lower this knock
- 7:26point just a little bit, might be a little bit high, But all
- 7:31that really is going to do is set our baseline for our rest of
- 7:34our height. And so for now, I might go with
- 7:37it just the way it is. If we run into issues down the
- 7:40road, like I said, I might have to adjust that a little bit
- 7:44further, but we've got it all the way up that we can get it.
- 7:50We should be good. So that said, we got our arrow
- 7:55stuff done. Now we're going to do second,
- 7:56third axis on our site. And so with that, we're going to
- 8:00keep our bow level and we'll dive into second, third axis
- 8:06right here. All right, just double checking,
- 8:08making sure we've got the cameras working.
- 8:09We don't want a camera failure like we had the last bridge Lock
- 8:13episode. Cameras are running good.
- 8:15Let's talk 3 axises on your site.
- 8:16First, second, third access. What are they and why they're
- 8:19important? So the first access is the site
- 8:22housings tilt forward or backwards.
- 8:24Like as you're holding your bow, is it tilted forward or
- 8:27backwards in this direction? The Bridge Lock UV slider from
- 8:32Matthews, they are guaranteeing the forward and reverse axis
- 8:38fitment on the slider itself. So that's the housing onto the
- 8:42rail. They're saying you don't have to
- 8:44worry about your first axis. We've got that covered.
- 8:47So that means all we have to worry about is our second axis
- 8:50and our third axis. The second axis is if you're
- 8:54looking at your site housing, its rotation left and right
- 8:58clockwise, like clockwise or counterclockwise as you're
- 9:01looking at it. So are your pins vertical when
- 9:05your bow is vertical? And so with that, we check that
- 9:08when we get our bow level, we'll check our, our, our peep or not
- 9:14our peep, but our bubble level in our site.
- 9:16And we'll, we'll do micro adjust to make sure that's level.
- 9:19The third axis is if you put a line straight through your pins
- 9:24from top down, is it tilted in or out about that line going
- 9:31straight down your pin. So basically is it curved to the
- 9:35left or is it curved to the right?
- 9:37And how that affects your arrow is when you start to draw an
- 9:41angle up or down South. For all of us whitetail hunters
- 9:44in a tree stand, we got our full draw we're putting down.
- 9:47If you drop that and that site housing is at an angle as you
- 9:51curve down, that bubble is going to go off and it's going to make
- 9:54you shoot to the left or the right.
- 9:55So very important stuff we got to figure out.
- 9:57So first we'll dive into the second axis tuning.
- 10:00So just the Yaw block. Certainly the my tool is too
- 10:05long, so I got to go use the one that it comes with.
- 10:10So don't throw your bag of tools away, folks.
- 10:14All right, which one's the 960 fours?
- 10:18Probably this one. So bottom of the block.
- 10:22Pop it in there. Come on.
- 10:26There we go. Loosen this up and now you can
- 10:31feel it start to wiggle. So we take our 960 fours, which
- 10:37I believe should be one of these two, and now we're going to
- 10:40adjust our micro adjust to make sure they match.
- 10:47And I'm going to match it up to my bubble level right here.
- 10:52And I think we're actually pretty close.
- 10:55I'm just going to play with it a little bit just for fun, but I
- 10:57think we already are pretty close to level.
- 11:03I'm going to double check my bow level.
- 11:05We are perfectly leveled on the bow and our bubble level matches
- 11:12our bow level, so we're going to lock this in now on the Yaw
- 11:18block, just a little of adjustment.
- 11:22Oh, double check, nothing moved, nothing moved.
- 11:28All right, tighten this back down nice and firm and then
- 11:34double check again. All right, so that's our second
- 11:36axis. That's all it is, folks.
- 11:38This block down here, loosen up the bottom of the AWE block and
- 11:41then there's a micro adjust on the UV slider.
- 11:43This is adjusting your pins. So as you're shooting very
- 11:47parallel, are your pins straight up and down?
- 11:50If you're holding parallel shooting on flat ground and your
- 11:52pins are going from left to right, it's going to be super
- 11:55confusing because you're going to sight in at 20, you're going
- 11:57to be good, You're going to go to 40, you're going to shoot to
- 11:59the right or to the left. You're going to be frustrated,
- 12:01so you're going to adjust and then you're going to go to 60
- 12:03and you're still shooting to the right at 60, but now you're
- 12:06shooting to the left at 20. That's why we want to our pins
- 12:08to be vertically aligned. So we got our second axis done.
- 12:12Now we're going to go to the third axis and the third axis.
- 12:15There's a couple ways you can do this to test if your third axis
- 12:19is in level. You can do this at any time.
- 12:20Test your third axis level, come to full draw and find a straight
- 12:25line, whether it's the state line of your target.
- 12:27Maybe come to a corner and just follow the corner of a house in
- 12:31the walls. Just follow that down with your
- 12:34pins to about a 45° angle and see if your bubble level moves
- 12:38as you start to decline your boat.
- 12:40Since I have this Baker Archery Products clamp, I'm just going
- 12:45to take my clamp here and I'm going to simulate the same
- 12:48thing. I'm going to turn to a 45°
- 12:50angle. I'm going to put this on my
- 12:53serving again so it doesn't move on me, and I'm going to come to
- 13:00an angle here. Just a little angle and what
- 13:03this is going to do is if I can get the, I'm going to get this
- 13:09on here from the right angle. So it's square.
- 13:11We want this to be pretty much level left to right.
- 13:15We got a little bit too much angle though.
- 13:17And if we can get this squared up on the side of the bow or
- 13:23side of the riser, right. So what I'm looking for now is I
- 13:27want my bow to be level left and right or the Baker Archery level
- 13:34left and right, but I want it to be at a 45° angle.
- 13:38So I got to lift this down a little bit, All right.
- 13:41So now what we have is my bow is at a steep angle, but it's level
- 13:46left and right, just angled down.
- 13:49And my third axis is off just a little bit.
- 13:52So if I'm looking at my bow, my sight gauge level on my bow is
- 14:01in the middle and my third axis is a little bit to the left.
- 14:05So now we're going to adjust the third axis.
- 14:07So you look here in the instructions, third axis, we've
- 14:10got to look at the top, this pin here on the top of our Yaw
- 14:14block, take the 960 fourths and we're just going to loosen this
- 14:19just a little bit, double check our levels, making sure
- 14:23everything is still level. We're a little bit off with our
- 14:29bubble level and now we're going to take our 960 fourths or 560
- 14:34fourths, sorry, and we're going to turn the adjustment screw on
- 14:38our third axis, which is right here until that bubble comes to
- 14:44the middle. So pretty simple, just play with
- 14:50that until you get the bubble to come into the middle and it's
- 14:54going to take a little bit of adjustment until you get it
- 14:57right in the middle. So I think I got it where I want
- 15:00it. I'm just going to double check
- 15:02that my bow is still level here in these blocks.
- 15:06Just trying to make sure that I got everything perfectly level,
- 15:10folks, That's all I'm doing right now.
- 15:13All right, so I think that's pretty close.
- 15:16So what we're going to do now is I'm going to leave it.
- 15:20I'm going to leave it loose. I'm just going to grab my bow.
- 15:23I'm going to take it out and I'm going to do the actual actually
- 15:26here before we do this, I'm going to do the actual test that
- 15:29you do at home. But what I'm going to do is put
- 15:33my release on 1st. So when I take this out, I'm
- 15:36just going to take an arrow because I don't want to dry
- 15:39fire. It's better to replace some
- 15:41drywall than to replace a bow. Folks.
- 15:46That is John West advice of the day.
- 15:50Take an arrow here, put it on, and I'm going to take this door
- 15:54frame, something that's pretty vertical and I'm going to snap
- 16:00in. I'm going to draw back.
- 16:02I'm going to make sure my headset doesn't mess this up,
- 16:06which it's really trying to do. And I'm going to follow that
- 16:11door frame down just a bit. Pins on the door frame, it is
- 16:21still pretty off, so we do have to do some adjustment.
- 16:27So I'm going to let down without going crazy and we're going to
- 16:35tweak it a little bit. So it was quite a bit to the
- 16:39left on our third axis, so I am going to bring it to the right.
- 16:48I hope that was to the right. I did righty tidy.
- 16:52We'll find out and then we'll just do it again.
- 16:55This time let me take my headset.
- 17:01All right, Headset's on the right side this time, which is
- 17:13the left side, which is super frustrating for me because I'm
- 17:16so used to it on the right side. But we're going to do the same
- 17:19thing, drop back and we're coming down.
- 17:23It's still way to the left, which means maybe it was righty,
- 17:28tighty lefty Lucy in the opposite direction.
- 17:30So we're going to come down again.
- 17:32I don't know why coming down on your arrow is the scariest thing
- 17:39to ever do in life, but it is. And let's go the other direction
- 17:44and try to get this dialed in. So coming to the left now, all
- 17:52right, and let's try it again. All right.
- 17:55We're still off to the side. So we're going to have to play
- 17:58with this a little bit. And I'll do that offline so I
- 18:01don't bore you folks. But that's basically how you set
- 18:05your third axis. It's when you're tilted down, is
- 18:08your bubble in the right direction, left or right?
- 18:11And so I'm going to keep playing with that, but I'm not going to
- 18:14bore you guys with the details too much, but just wanted to go
- 18:18through a quick overview. How do you set your your rest
- 18:22level, your second access and your third access and maybe your
- 18:25first access if you don't have a UV slider, you might have to set
- 18:28your first access as well with the UV slider.
- 18:30They guarantee first access from factory is level.
- 18:34And so that's the breakdown folks.
- 18:35That's how you set your second and third access, your archery
- 18:40rest level, and that's your bridge lock bonus episode for
- 18:44today. And by the way, before we
- 18:47forget, we got to come up with a code word for this week.
- 18:50And what should we do for a code word?
- 18:55We've got all kinds of things going on right now, but one of
- 19:00the things that we've got that is going crazy is the success
- 19:05that you guys have given us on Apple Podcasts.
- 19:08So in order to keep that momentum going, please check out
- 19:13our show on Apple Podcasts. Give us a like rating review
- 19:16over on Apple. Even if you don't listen to
- 19:18Podcasts on Apple, we're really trying to grow on Apple right
- 19:21now and get featured so we can help bring this to more people.
- 19:24So for the code word for this week, let's just use Apple
- 19:27really easy. Whether it's Apple Podcast,
- 19:29Apple iPhone or Apple Orchard where you're going to shoot a
- 19:32monster buck, The code word for this week is Apple.
- 19:34So send that in to Brian, get Drawnwest, get your bonus
- 19:37entries, and thank you for watching, folks.