Latest / NTC's Temporal 3 / Episode 43 | Essential fire alarm design software skills Understanding NFPA 1225 and NFPA 70 standards Latest developments in ERCS and radio communication systems, and more
Transcript
- 0:04SPEAKER_01: Hello, everyone, and welcome to this edition of the Temporal 3 Podcast, where we talk all about fire alarm.
- 0:11SPEAKER_01: I'm joined by my co-host today, Mr.
- 0:13SPEAKER_01: Charles Ulner.
- 0:14SPEAKER_01: Hello, Charles.
- 0:15SPEAKER_01: Hey Brian.
- 0:16SPEAKER_01: Hi, Chris.
- 0:18SPEAKER_01: And also Chris Godwin.
- 0:19SPEAKER_01: Hello, Chris.
- 0:21SPEAKER_01: Hey, Brian.
- 0:21SPEAKER_02: Hey, Charles.
- 0:23SPEAKER_01: Well, guys, I'd like to start off first about talking about training.
- 0:27SPEAKER_01: And I had an interesting phrase thrown at me recently that I'd like to talk about that I think really applies to a lot of our technicians, a lot of our students out there, and that is get off the ladder and into the office.
- 0:40SPEAKER_01: So, Charles, why don't you talk about that a little bit?
- 0:42SPEAKER_01: Where does that come from?
- 0:43SPEAKER_01: What's the thought process behind that?
- 0:46SPEAKER_00: Well, at a certain point, we get, how shall I say, more physically limited in our work in the fire alarm industry as a technician.
- 0:58SPEAKER_00: And folks who are of an elderly age may find it more difficult to go up and down ladders, crawl through tight spaces, pull wire, do all that kind of really physical work.
- 1:12SPEAKER_00: And that doesn't mean that they're useless as fire alarm professionals.
- 1:17SPEAKER_00: They can still put their knowledge and decades of experience to use in fire alarm design.
- 1:24SPEAKER_00: So design is another career track, really, and it's an excellent way for experienced technicians to put that experience to valuable work.
- 1:36SPEAKER_01: Absolutely.
- 1:37SPEAKER_01: I agree with you.
- 1:38SPEAKER_01: It is definitely part of the career path, part of the trajectory for fire alarm techs.
- 1:43SPEAKER_01: You're right.
- 1:43SPEAKER_01: Going up and down the ladder at some point gets hard on the knees, uh, crawling in the spaces, stuff like that, doing all that hard work.
- 1:50SPEAKER_01: At some point, a technician may want to look for that.
- 1:53SPEAKER_01: And we're we're all not like uh fitness gurus like Chris, who uh probably could still pull wire and do all this other fun stuff that he did 10 or 15 years ago.
- 2:03SPEAKER_01: But uh, guys like you and I, Charles, yeah, the desk job is really an appealing thing.
- 2:07SPEAKER_01: So, Chris, what's required to move into that category?
- 2:11SPEAKER_01: What what do you think would be a good thing for a technician to have to be able to look at that as a possible career trajectory or path?
- 2:18SPEAKER_02: Well, first, I I want to put it out there that it doesn't matter how what your age is, it's a hard job doing all of the actual physical work on the fire alarm side.
- 2:29SPEAKER_02: So moving into learning how to do more outside of that is is going to have much more longevity in the field of fire alarm.
- 2:38SPEAKER_02: So big thing is moving into design.
- 2:41SPEAKER_02: And with design, it comes with understanding how to use different fire alarm design softwares, fire CAD, alarm CAD, things like that.
- 2:51SPEAKER_02: No, uh having good knowledge of the code, another big aspect of that.
- 2:56SPEAKER_02: From a designer's perspective, you're not just saying this looks about right, this looks like it should.
- 3:01SPEAKER_02: No, you need to know what the code has to say with it.
- 3:03SPEAKER_02: So having an understanding of the design software, maybe getting your hands on that software itself is gonna be a big, big key to start helping you move a little bit more out of the field and into being able to continue working with Fire Alarm from a perspective that provides you with much more longevity and uh let's face it, less burnout.
- 3:26SPEAKER_02: Burnout's a big thing in any industry, and especially something that happens quite more often when you are doing a lot of the harder physical work.
- 3:36SPEAKER_02: So design software, code knowledge, learning how to use that software is huge.
- 3:42SPEAKER_02: You've got a lot of different companies out there with their own softwares.
- 3:46SPEAKER_02: Fire CAD and Alarm CAD are two of the bigger ones, but there are other different design softwares.
- 3:52SPEAKER_02: Learning how to use it and starting to become familiar with it are huge aspects to that.
- 3:58SPEAKER_00: And Chris, I would also add estimating software in there as well.
- 4:03SPEAKER_00: Uh, as a designer, one important aspect of your role is to be able to estimate labor, equipment, time, uh, pricing, all that has to be taken into account in your design.
- 4:19SPEAKER_00: That's the whole purpose of design is to get to hey, we can offer you this fire alarm system in your building for this.
- 4:28SPEAKER_00: And estimating software coupled with the design software you were talking about makes for a whole package.
- 4:37SPEAKER_02: Oh yeah, 100%.
- 4:38SPEAKER_02: And it's it's a big design is not just putting stuff down to paper.
- 4:44SPEAKER_02: And so there's a lot of other aspects, but absolutely getting the actual estimating software is a huge thing.
- 4:51SPEAKER_02: And there's some really cool ones out there where you can drop your drawing directly in and it pulls everything, every aspect you would need based off of oh, here's your drawing, here's what we got.
- 5:02SPEAKER_00: Uh, used to be write it down on a napkin.
- 5:08SPEAKER_01: You're making fun of the way I still do it.
- 5:11SPEAKER_00: Yeah.
- 5:13SPEAKER_01: So, Chris, I will say that with the design softwares, and you've worked with a couple of them, I've had intimate experience with one.
- 5:20SPEAKER_01: And one thing that I've noticed about the design software is it is completely different uh with the CAD-based programs like FireCAD or Alarm CAD.
- 5:28SPEAKER_01: It's completely different than any other software that I've worked with.
- 5:32SPEAKER_01: I consider myself to be knowledgeable in Microsoft uh Office programs like Word and Excel, PowerPoint.
- 5:39SPEAKER_01: When I started using FireCAD, it just melted my brain.
- 5:44SPEAKER_01: I could not figure it out, but I eventually did.
- 5:48SPEAKER_01: And the thing about it is, what I found out is yeah, knowledge of how to use CAD is helpful, but Fire CAD is a little different track, a little bit different take on it.
- 5:59SPEAKER_01: There's so much in Fire CAD that kind of makes it friendlier for the technician.
- 6:03SPEAKER_01: So you don't have to go to school and get a two-year degree in CAD to do design.
- 6:08SPEAKER_01: You just got to get some, understand some of the basic commands, understand how things work, which there's plenty of tutorials out there and support for that.
- 6:17SPEAKER_01: And then you can start doing it without being um, you know, if I if I was uh asked, somebody asked me to do AutoCAD work, I'd say, well, I don't know how to do that.
- 6:25SPEAKER_01: But if you asked me to design a fire alarm system in FireCAD, I can do that because all the tools are there.
- 6:31SPEAKER_01: Have you generally had that experience, Chris, as well?
- 6:34SPEAKER_02: Yeah, I mean, before getting into design, nothing, no idea about CAD.
- 6:40SPEAKER_02: Um, I started learning design more on Alarm CAD, and then uh when we moved over to FireCAD, starting doing that.
- 6:47SPEAKER_02: But you don't need to know anything about AutoCAD in order to know how to do either of those programs.
- 6:54SPEAKER_02: Now, some other programs, having a background in AutoCAD is going to be beneficial, but for a lot of design, we're not doing CAD work.
- 7:03SPEAKER_02: We're taking the drawing, which is already done with CAD, dropping it in, and then pulling our stuff and putting it to it.
- 7:10SPEAKER_02: So it actually, you don't have to know anything.
- 7:13SPEAKER_02: Having an understanding of CAD, though, really does help out with some of the other commands, being able to take a little bit faster track with the design.
- 7:22SPEAKER_02: But you really don't need to know anything about CAD in order to use um most fire alarm design software, which is a huge benefit.
- 7:33SPEAKER_00: Well, Brian, you're a gentleman with lots of experience under your belt.
- 7:40SPEAKER_00: Another way of saying you're an old guy.
- 7:43SPEAKER_00: Yes.
- 7:44SPEAKER_00: Uh, did you find using Fire CAD to be difficult?
- 7:49SPEAKER_00: Was your brain locked up so you couldn't do it?
- 7:52SPEAKER_00: Or was it something you were actually able to experience and learn and get familiar with?
- 7:58SPEAKER_01: I was able to learn it.
- 7:59SPEAKER_01: Uh, initially, it was very, very intimidating because I thought, oh, I need to know how to use CAD and all this other stuff.
- 8:04SPEAKER_01: And I did all these tutorials on CAD and learned how to do CAD drawings and all this.
- 8:09SPEAKER_01: And then I jumped into the program and everything is just click.
- 8:12SPEAKER_01: It says click this, click that.
- 8:14SPEAKER_01: You know, it it really does not require an extensive knowledge of CAD because all the all the tools are there for you.
- 8:23SPEAKER_00: So for someone who's been in the field for years and may not have a significant amount of computer skill, CAD still, FireCAD is still something they could learn how to use relatively easily.
- 8:36SPEAKER_01: Absolutely.
- 8:38SPEAKER_01: Absolutely.
- 8:38SPEAKER_01: And our friends at FireCAD are really great about helping people get up to speed and uh giving you all the resources that you need to be able to understanding and supporting you when you uh when you fall and scrape your knee.
- 8:52SPEAKER_00: And is there any other training that might be beneficial?
- 8:55SPEAKER_00: I was just gonna ask you guys that.
- 8:57SPEAKER_01: So, what do you think, Chris?
- 8:58SPEAKER_01: What opportunities do we have for our students, for our listeners to the podcast to learn about this program and learn about the Zonic?
- 9:06SPEAKER_02: Um, you know, I I believe, you know, because I'll be teaching it in about two weeks now, but I believe that uh we might have some design classes um on board that we teach every month and every other month.
- 9:22SPEAKER_02: We might be having something like that.
- 9:24SPEAKER_02: Uh we do offer basic design, a little bit of understanding of the code aspect of it, but our design workshop class goes more into the Fire CAD and actually utilizing CAD software and being able to use that to design for class purposes.
- 9:41SPEAKER_02: You can use the software however you want afterwards, but to how to design a system.
- 9:45SPEAKER_02: So there's that.
- 9:46SPEAKER_02: There's absolutely training through us that we offer.
- 9:50SPEAKER_02: Um, there's a lot of tutorials throughout YouTube, but uh yeah, I mean, we do have classes.
- 9:56SPEAKER_00: We Chris, is that virtual firecad training that we offer you're talking about sounds really exciting.
- 10:03SPEAKER_00: Brian, is there any way we can like make it more exciting?
- 10:08SPEAKER_00: Is there any class we offer that would be more exciting than just a virtual class?
- 10:13SPEAKER_01: Yeah, I was gonna say if you want to see Chris live in person.
- 10:16SPEAKER_01: In person, in person, he's very impressive, he's an impressive young man.
- 10:21SPEAKER_01: Uh come to join us in Las Vegas, November 3rd through 5th.
- 10:25SPEAKER_01: We're offering a three-day class that'll be hands-on, live instruction, multiple opportunities, opportunities to learn the program and meet other technicians and learn together.
- 10:36SPEAKER_01: And where's that being held, Brian?
- 10:39SPEAKER_01: November 3rd through 5th in Las Vegas.
- 10:42SPEAKER_01: Where?
- 10:42SPEAKER_01: Where?
- 10:43SPEAKER_01: Where?
- 10:47SPEAKER_00: Yeah, Las Vegas.
- 10:48SPEAKER_00: That's Chris's hometown, too.
- 10:50SPEAKER_01: Yes.
- 10:51SPEAKER_01: And if you're lucky, Chris will take you on the Chris Godwin Las Vegas reality tour where he goes to all the really seedy parts of Vegas.
- 10:58SPEAKER_02: My gosh.
- 11:03SPEAKER_01: Yes, absolutely.
- 11:05SPEAKER_01: Well, great.
- 11:06SPEAKER_01: Guys, next topic I'd like to talk about is a code topic, and I want to talk about ERCs.
- 11:12SPEAKER_01: ERCS, BDA, DAS, you know, it all kinds of acronyms for this.
- 11:17SPEAKER_01: And a lot of our fire alarm students are a lot of fire alarm companies are moving into this category.
- 11:24SPEAKER_01: It's an excellent revenue opportunity.
- 11:26SPEAKER_01: It's another, it's a natural path of progression for fire alarm people because it involves cable, even though it's RF instead of DC voltage, like we deal with fire alarm.
- 11:36SPEAKER_01: The thing about it is, with a new technology like this, there's a new set of codes that we have to become familiar with.
- 11:42SPEAKER_01: And there are three of them in particular that revolve around ERXES.
- 11:47SPEAKER_01: And those are NFPA 1225, the International Fire Code, which we do use for fire alarm in some parts of the country as well, and there's a particular section that uh is dedicated to it, and our old friend NFPA 70, the National Electoral Code.
- 12:01SPEAKER_01: There's a chapter that's dedicated to that.
- 12:03SPEAKER_01: So let me talk first about IFC and uh IFC section 510.
- 12:09SPEAKER_00: Brian, before you get into that, you mentioned these acronyms, ERCS and whatever.
- 12:15SPEAKER_00: What is that?
- 12:17SPEAKER_01: ERCSES is emergency responder communications enhancement system.
- 12:22SPEAKER_00: How is that applied in a building?
- 12:24SPEAKER_00: What's the purpose of that?
- 12:25SPEAKER_01: So firefighters, modern firefighters, carry radios, right?
- 12:29SPEAKER_01: All first responders carry radios.
- 12:31SPEAKER_01: Problem when you get into a building is that you have those obstructions like the walls, like the windows, other things that will block that radio signal.
- 12:42SPEAKER_01: And if anybody's ever tried to use a cell phone in the middle of a building or a parking garage or something like that, you've experienced this.
- 12:49SPEAKER_01: Old guys like me can remember when the AM radio would go out when you go underneath the bridge, that type of thing.
- 12:56SPEAKER_01: Same concept here, guys.
- 12:58SPEAKER_01: And so what the code requires is that in those situations, that we have to provide a system so those radios will work.
- 13:07SPEAKER_01: And that is an ERX system.
- 13:08SPEAKER_01: That is basically a system that will enhance the radio by providing additional antennas for coverage and amplifying the signal in both directions.
- 13:16SPEAKER_01: So thanks for bringing me back on track on that, Charles.
- 13:19SPEAKER_01: Yes.
- 13:19SPEAKER_01: And uh 510, which is uh a let's call it a relative of the IBC, the International Building Code.
- 13:27SPEAKER_01: And IFC510 has requirements for these ERC systems and basically has that requirement.
- 13:32SPEAKER_01: Well, look, if the radio signal is not going to be good in the building, you've got to supplement it.
- 13:36SPEAKER_01: And it has some requirements for performance of the system.
- 13:39SPEAKER_01: Now, 1225 is another code.
- 13:42SPEAKER_01: Chris, talk to us about 1225.
- 13:44SPEAKER_02: 1225 is actually, it is another code, but it's a newer code.
- 13:50SPEAKER_02: You what they've done is they've taken some information from what was previously NFPA 1221 and they combined it with some other standards to put together 1225.
- 14:00SPEAKER_02: And really, 1225, when we're talking about um ERCS, or as they refer to it within the confines of 1225, in building public safety communication enhancement systems, yet another acronym for you all to memorize when we're talking about boosting the radio signal.
- 14:17SPEAKER_02: There's two chapters that are really going to be the meat of that scope.
- 14:21SPEAKER_02: And that's chapter 18, which goes more into that particular system and equipment install requirements, cable requirements.
- 14:29SPEAKER_02: And then you've got chapter 20, which is inspection and testing.
- 14:33SPEAKER_02: Now, what I found interesting about this is chapter 18, when you first look at it, it looks massive.
- 14:41SPEAKER_02: You have up to 15 sections within chapter 18.
- 14:46SPEAKER_02: And then you start going through it, and it's very short and limited the amount of information that is in chapter 18.
- 14:53SPEAKER_02: It gives you some more of basic knowledge with the information that's going to be talking about as far as equipment install and cable requirements.
- 15:02SPEAKER_02: But really, it's very, very limited to the actual information there.
- 15:06SPEAKER_02: And it looking at it, I was just like, this is different.
- 15:10SPEAKER_02: There are so many sections, and there's not a lot of information associated with it.
- 15:14SPEAKER_02: Taking a look at chapter 20, inspection and testing, it there's like four sections to it.
- 15:20SPEAKER_02: But you do have a bit more information per section.
- 15:23SPEAKER_02: And it was a little bit of trying to understand that 1225 is yes, the new governing NFPA standard when we're talking about these types of systems.
- 15:34SPEAKER_02: But a lot of what we're going to be diving into is other code or other requirements coming from other sections of other standards.
- 15:44SPEAKER_02: And uh it was weird.
- 15:45SPEAKER_02: I was just like, this is very different from what we're used to.
- 15:50SPEAKER_02: You know, talking about from fire alarm, fire alarm, we have a whole book of fire alarm.
- 15:56SPEAKER_02: Getting into any kind of irx, it's you've got two chapters within a standard, and there's not a whole lot.
- 16:04SPEAKER_02: There's information, but it's not a significant amount of information to dive on.
- 16:09SPEAKER_01: So the analogy I like to use, you're absolutely right.
- 16:12SPEAKER_01: We're so used to 72, and fire alarm smoke detectors are 30 feet apart, and with ERC's, uh, antennas are whatever they're required to be based on the design, how far apart they are.
- 16:22SPEAKER_01: And the cabling, obviously, you know, we're we'll we'll jump into that a little bit, but um you know, the cabling is uh something that's pretty uh similar to what we do with fire alarm as far as ratings and stuff like that.
- 16:32SPEAKER_01: But the uh the antenna part of it, which is a big part of ERCS and the amplifier part of it, um, it's kind of different.
- 16:39SPEAKER_01: And the antenna thing is really the big thing there that you have to deliver a certain amount of radio signal.
- 16:43SPEAKER_01: It's not a matter of number of antennas or antenna spacing.
- 16:47SPEAKER_01: It's more like performance-based design in FireAlarm.
- 16:50SPEAKER_01: Uh, that uh, you know, we're the code is a guide, but you know, basically what you need to do to get it done is what you do.
- 16:55SPEAKER_01: Charles, I'd like you to.
- 16:56SPEAKER_00: I have a question for Chris on this subject.
- 17:01SPEAKER_00: Uh obviously it's pulling wire and connecting devices, electronic devices, uh, antennas and amplifiers and whatever.
- 17:10SPEAKER_00: Once I get it installed and I power it up and I'm exposed to all this RF, am I gonna like get any superpowers as a result of that, Chris?
- 17:22SPEAKER_02: I mean, probably not.
- 17:25SPEAKER_02: There's no there's there are medical issues that might occur radio frequency, what we're using here, is not gonna be significant enough to do any kind of bodily damage.
- 17:36SPEAKER_00: And the other question is Brian, could I use a tinfoil hat to protect myself from these RF signals?
- 17:43SPEAKER_01: Absolutely, yes.
- 17:45SPEAKER_01: Yes, you can to keep Mark Zuckerberg from stealing your personal information.
- 17:49SPEAKER_00: Yeah, I don't want my personal information getting out.
- 17:52SPEAKER_01: Yeah, well, I I did learn that uh learning more about uh ERXEs and NFPA 1225 to get it and actually working in fire alarm in general did give me one uh annoying superpower.
- 18:02SPEAKER_01: One superpower that I use is the ability to annoy my wife even more.
- 18:06SPEAKER_01: So Charles, talk to us about NFPA NFPA 70.
- 18:12SPEAKER_01: We're all familiar with Article 760 from 70, but there's a different uh section of 70 that applies to radio.
- 18:19SPEAKER_00: Article 800.
- 18:21SPEAKER_00: Uh 800 is communication systems and uh or wiring, really, and it covers uh all aspects of various communication systems, including fiber optic cable and other things.
- 18:35SPEAKER_00: Uh it also has uh requirements for RF.
- 18:43SPEAKER_01: We've also got 800 as general, we've got 810 as the antenna requirements, which include installation and grounding and bonding, which of course goes back to 250, and then 820 for uh CATV and radio distribution, which covers the cabling.
- 18:59SPEAKER_01: But uh, it's a chapter and an article, a chapter 70 that most fire alarm people don't even think about because we're focused on 760.
- 19:08SPEAKER_01: And uh it's something that we will need to familiarize ourselves with when we jump into ERCs.
- 19:16SPEAKER_02: What I was annoyed with with it is um fire alarm is article 760, right?
- 19:22SPEAKER_02: And it's nine pages.
- 19:23SPEAKER_02: You have nine pages dedicated to us specifically for fire alarm, and then there are other sections of code that within 70 that could be applied to fire alarm purposes.
- 19:33SPEAKER_02: All right, cool.
- 19:34SPEAKER_02: We got all that.
- 19:35SPEAKER_02: That's great.
- 19:36SPEAKER_02: When you look at doing these these ERC systems, you jump into 70, and it's like Article 800 is something that could be applied.
- 19:44SPEAKER_02: Um, chapter three could be applied.
- 19:47SPEAKER_02: Oh, yeah, Article 810's got information that could be applied.
- 19:50SPEAKER_02: Oh, yeah, don't forget, you're gonna refer back to 250 and more of chapter three.
- 19:54SPEAKER_02: And then are why do we have more information about this newer thing that it yeah, it is kind of important, but it's one, it's brand, it's not, I don't want to say it's brand new, but it's a newer thought process to technology and boosting the hand pack signal.
- 20:11SPEAKER_02: But it's you have so much more to dive into with 70 when it comes to that.
- 20:16SPEAKER_02: You've got again chapter 8, the whole it's communications, article 800, general requirements when we're talking about communications, 810, information about the antennas, and then 820, as you mentioned, uh CATV and radio distribution.
- 20:30SPEAKER_02: It's like it took over for for us, and from a you know, being a fire fire alarm technician standpoint, 70 is used for install, and you know, if you've got to add wire, and that's really it.
- 20:45SPEAKER_02: But now there's so much more to know about it when it comes to just doing this one aspect.
- 20:50SPEAKER_01: Absolutely.
- 20:51SPEAKER_01: And I I think it's because the uh the guys at NFPA just hate us in the field, is what it is, and they write things to make our lives more complicated.
- 20:59SPEAKER_01: I believe it.
- 21:01SPEAKER_01: I believe it.
- 21:02SPEAKER_01: Well, guys, next I'd like to talk about our question from the field this week.
- 21:06SPEAKER_01: Our question from the field is when does a fire alarm system require additional power?
- 21:12SPEAKER_01: Charles, what are some common sources of additional power for a fire alarm system?
- 21:17SPEAKER_00: Uh uh NAC extender is a big one.
- 21:21SPEAKER_00: Uh if you have a certain number of notification appliances, horn strobes that require additional power, uh, you need to have an additional power source for that, a power supply, a NAC extender.
- 21:36SPEAKER_00: And the determination of that comes from calculations we do called voltage drop.
- 21:41SPEAKER_00: So that's how we determine whether one is required or not.
- 21:46SPEAKER_00: One rule that one of our instructors, Kyle, throws out every now and then is hey, if you've got twenty five or more notification appliances, you need To check and make sure whether you need a NAC extender or not.
- 22:04SPEAKER_00: So I think that's a general rule of thumb.
- 22:07SPEAKER_00: If you start approaching that quantity, you better take a closer look and make sure you have enough power to to provide adequate power to all those devices.
- 22:19SPEAKER_01: Absolutely.
- 22:20SPEAKER_01: Chris, what does a NAC extender actually do?
- 22:24SPEAKER_02: Your NAC extender is going to be used to extend it sounds it sounds self-explanatory.
- 22:31SPEAKER_02: It's more into it than that.
- 22:33SPEAKER_02: It extends the power source for your notification circuits.
- 22:37SPEAKER_02: You see, the panel powers everything for the most part.
- 22:42SPEAKER_02: But once we get to, as Charles was saying, you know, 25 and above a notification appliances, it just doesn't necessarily have enough power.
- 22:52SPEAKER_02: So that NAC extender is there to be an additional power source to extend the power of your notification circuit on a you know bigger project, on a bigger square footage facility, or high-rise, or just a building that's not going to be smaller or has a lot of notification.
- 23:12SPEAKER_02: So that is exactly what it does.
- 23:14SPEAKER_02: It's there to boost your power power for the NAC circuit.
- 23:18SPEAKER_02: It's got to be supervised by your panel.
- 23:22SPEAKER_02: Um, most of the time, you'll have anything that happens on your NAC, your uh extender itself, you're gonna be skitting your signals back to the panel.
- 23:31SPEAKER_02: So it's like I said, it's there to give us more power on a larger system.
- 23:37SPEAKER_02: Not every system is small.
- 23:39SPEAKER_02: And when we look at fire alarm from the perspective of fire alarm, you're going to have some particular buildings that are just bigger.
- 23:46SPEAKER_02: You need more.
- 23:47SPEAKER_01: So absolutely.
- 23:50SPEAKER_01: And you talk about the connection to the panel.
- 23:52SPEAKER_01: You know, I a lot of times we think about uh NAC extenders at least when they initially came out.
- 23:56SPEAKER_01: And I'm old enough to remember when they uh when they came out.
- 24:00SPEAKER_01: In fact, Charles likes to tell the story about the first time we met, how I explained the uh need for a NAC extender to him.
- 24:06SPEAKER_01: And then uh when I was working in distribution, he was working for an installer, and how then I promptly overcharged him because he didn't know what he was doing.
- 24:16SPEAKER_01: But anyway, a lot of back way back when it was supervised by the NAC circuit, but now on a lot of systems now we have these what they call smart NAC extenders that communicate via data and give us a lot more capability.
- 24:30SPEAKER_01: So now we'll have the data circuit that controls the NAC extender and provides that supervision, but also allows us to do more things with it.
- 24:38SPEAKER_01: It used to be input equals output, so we trigger it from the NAC circuit and it basically passes on that output.
- 24:45SPEAKER_01: But now with the smart ones, we can say, all right, from the panel, I want you to activate circuits one and four out of a four-circuit NAC extender, or I want you to do this, I want you to do that.
- 24:55SPEAKER_01: There's a lot more capability, but those smart ones usually are uh specific to the equipment manufacturer.
- 25:02SPEAKER_01: So you do have more capability with that for sure.
- 25:05SPEAKER_01: The other type of uh power supply that we commonly see on fire alarm, and this is one we don't really think about so much, but there's the auxiliary power supply.
- 25:14SPEAKER_01: Chris, where would we use an auxiliary power supply?
- 25:17SPEAKER_02: Auxiliary power supply is gonna be more a lot more or less for your conventional initiating devices, beam smoke detectors, air sampling that are, as mentioned, they're conventional uh devices that are not gonna be sending signals back that let us know which ones they are.
- 25:35SPEAKER_02: They are probably gonna need additional power sources as well in order to give them what they need to do their job.
- 25:42SPEAKER_02: So some of those are gonna be where you'll see the necessity for an auxiliary power supply.
- 25:47SPEAKER_01: Yeah, if we've got, if we're using uh beam detectors is a great example, air sampling, they're conventional type devices, they're not addressable.
- 25:56SPEAKER_01: We're integrating it with an addressable system.
- 25:58SPEAKER_01: Obviously, we're gonna pop a monitor module on it.
- 26:01SPEAKER_01: Well, where do we get the power?
- 26:02SPEAKER_01: We get the power from the panel, possibly, if there's enough aux power available, but uh, and it's not NAC power, it's aux power, so it's different.
- 26:10SPEAKER_01: It's resettable typically.
- 26:12SPEAKER_01: Sometimes we'll use a remote power supply for that as well.
- 26:15SPEAKER_01: But one thing that we have to remember to do with this, too, anytime we have these conventional type devices, and I'll use a term that we don't hear very often anymore, is a four-wire initiating device, as opposed to a two-wire.
- 26:28SPEAKER_01: I'm again, I can remember two-wire smokes when that prior to addressable when you ran two-wire to a conventional smoke and then four-wire smokes, because the circuit and power are separate.
- 26:38SPEAKER_01: We also have to supervise that power circuit using an end-of-line relay.
- 26:43SPEAKER_01: So that's something important to remember with those aux power supplies and those conventional devices that are powered by that aux power, whether it come from the panel or come from a remotely located power supply, is that we have to have that end-of-line supervisory device.
- 26:59SPEAKER_01: And it's not an end-of-line resistor, it's actually an end-of-line relay that is required.
- 27:05SPEAKER_01: And that's something I think that often gets overlooked by designers or technicians, don't think about it.
- 27:10SPEAKER_01: But think about it this way if something happens to the power to that device, gets cut, you really have no way of knowing it.
- 27:17SPEAKER_01: And that's the way you supervise that power by providing that device.
- 27:21SPEAKER_01: Well, awesome guys.
- 27:23SPEAKER_01: I appreciate the uh lively and interesting discussion today.
- 27:26SPEAKER_01: As always, I want to remind all of our listeners to please like and subscribe, and we'll see everybody next time.
- 27:33SPEAKER_01: Thanks, guys.
- 27:35SPEAKER_01: Thanks, Brian.
- 27:36SPEAKER_00: Thanks.