Latest / MitsuTimes Podcast / Ep210: Keith from BeanFab Part 2
Transcript
- MitsuTimes: What's going on guys? Welcome to another episode of the Mitsutom's podcast. Today we have a special guest, Keith from BeanFab. How are you today, KEITH LOFORTE: Very good. Thank you. MitsuTimes: Yes, sir. Thank you for taking the time to come on here and especially thank you for helping keep the Mitsu times alive. mean, from day one, you've been a sponsor and it's, I, there's no way I could take on all these costs by myself. So a huge thank you for, ⁓ supporting the community and definitely propping up Mitsu times. Well, Keith, it's been a while since our last episode. What's changed the most at the shop since then? KEITH LOFORTE: ⁓ happy to do it. Probably, ⁓ I mean now that the tracks are closed basically, I mean there's one track in Jersey which is Island Dragway but it's. pretty far ride. ⁓ And once they closed Angostown and then Atco, ⁓ you know, we're starting to see less of the like, quote unquote, like full drag evos now and seeing more of, you know, just basic street street cars, you know, we still get the drag cars, but it's a lot less than, you know, previous years. People are now more into like, you know, a street car, you know. I mean, still 7, 800 horsepower, but not a lot of people want to do 1,011, 1,200 horsepower cars. MitsuTimes: Yeah, for sure. definitely seems like maybe reliability is becoming ⁓ more and more popular as opposed to ⁓ all out builds. KEITH LOFORTE: Yeah. I mean, the thing I try to tell people if they want to build like a all out drag car is like the, it costs you to build the car, like you're still not done. need backups. So if you can't afford to build two motors, you know, trying to campaign a drag cars, you know, you gotta be ready to have backups of everything, you know, backup transfer case. Backup motor, stuff like that. If you want to actually race it more than, you if you want to try to race it a lot during the year and keep, you know, if you're trying to race a series or something, you know, if you're just trying to go out and make passes here and there, then, you know, if you have downtime, it's not really a big deal. But if you're someone that doesn't want downtime, you need to be able to have backups. MitsuTimes: sure. It's definitely not for the week. KEITH LOFORTE: No, no, no, because a lot of people think, you know, well, if it cost me 40,000, do the bill, whatever the number is, 30,000, 40,000, you if you want to build a, that's the other thing. Like if you want to build a big horsepower Evo, like you're not doing it for 20,000, you know what I mean? You're going to spend, unless you're doing everything yourself, you're buying everything you use, you know what mean? But if you're going to do like a proper setup, I mean, just the cage now. is, you know, five, six, $7,000 for, you know, for like a nice cage. So when you start adding everything up to do like a proper drag car, it's going to be expensive. And then as they say, you know, whatever the number is you think it's going to be add a bunch extra onto that. Cause it's all the little stuff here and there. It just starts to add up, you know? And then once you get it done, the maintenance is starts to get expensive. You know what I mean? Clutches and everything else that goes along with it. MitsuTimes: Yeah. You know, the saying is it'll nickel and dime you, but it's a lot bigger than nickels and dimes and it's more quarters coming at you. KEITH LOFORTE: Yeah. ⁓ yeah. Yeah. Yeah. Yeah. Yeah. It gets, it gets expensive, especially with traveling and you know, all that stuff. I mean, there's not really a ton of Evo guys that do like traveling and go to events. You know, it seems like the Evo guys are more like a test and tune and you know, just go to the track here and there. MitsuTimes: Yeah, that definitely seems like the case, even with, you know, kind of the return of the bigger events, Nopi and all that good stuff. It doesn't seem like lot of EVOs are traveling, at least not as much as the DSMs. KEITH LOFORTE: Yeah, exactly. mean, there are some, but it's few, you know what mean? And then it's not like the Honda guys, which sit there. Those guys race, you know what I mean? Those guys really, those guys get after it. Yeah. MitsuTimes: They're in a world. Well, Keith has your overall philosophy towards building EVOs changed over all those years? KEITH LOFORTE: ⁓ Not really, you know what I mean? It's kind of been the same as it's always been. It's just now if someone wants to do a bigger build, I just try and. give them a heads up early on about everything that's going to come with it. You know what I mean? Like, like maintenance and you you're there's going to be small. If you're going to do a big build, there's going to be small issues and you're going to have growing paint here and there. There's going to be little stuff and you know, if you have one or two little things happen, you can't get discouraged and then want to just part the thing out. You know, you want to work through whatever, you know, small issues you're going to have. And even if it's a big issue, you just got to get it taken care of and keep moving forward. MitsuTimes: Right. Get it back out on the road. KEITH LOFORTE: Yeah. I mean, if you think you're going to build a eight, 900 horsepower car and just get it built, tune it and just put 40, 50,000 miles on it with never having to do anything with change the oil. It's like, it's not this. That's not the car for you. know, maybe you should just get like a BMW and just put a tune in some downpipes on it and you know, something like that. MitsuTimes: Yeah. And Keith, you probably know better than most people. mean, you know, your car breaks and you don't have the money to get it back out on the road, sets on jack stands, you lose interest in it real fast. I think a lot of people don't realize that. KEITH LOFORTE: Correct. Yeah. lot of, or like, you know, a lot of people get discouraged when they have, you know, little issues here and there trying to just, you know, it's, it's always going to be something, you know, it's never always super smooth, especially, you know, doing performance stuff. I mean, if you're just doing basic maintenance, you know, that that's one thing, but when you're doing performance stuff and trying to make the kind of power that we're making these days. You're always going to have some sort of issue and it's like, you just got to be able to, and the other thing is like your eight, 900 horsepower car, it's not going to drive like stock. Like if you want it to idle perfectly and every little no hiccup, like there's going to be something and you're going to have to deal with it. It's never, there's always the trade off. You want to make more power, you know, it's going to have a little bit of a rougher idle, you know, it might have little drivability quirks here and there, which the tuner can work through some of the little quirks, it takes, you know, might take a revision or two to work through that stuff. And you just have to be prepared with it. You know, once you start modifying them, you know, it's a trade off and you're just gonna have to, you know, be able to deal with that trade off. MitsuTimes: Well, Keith, know, something that I think ⁓ is pretty fascinating, you know, when you're looking back at the cars that you've been around and built over the years, the turbo tricks, the orange Evo, is there anything that you would do differently now with the modern knowledge that you did with those cars back then? KEITH LOFORTE: Mm. I mean, yeah, you know, lot of stuff has changed. So, you know, we would have done some stuff differently if it was available. You know what mean? It's mainly nowadays it's like turbo technology has just really. MitsuTimes: And then, again. KEITH LOFORTE: been like a game changer, you know, as far as, you know, I mean, we were back then on like a cast wheel. 70, I think it was a 74 millimeter was the GT 42, but like, mean, that thing was a dinosaur compared to what they're doing now. You know, you're, you're making the same power. Like my, my drag cars are 67 millimeter. makes around the same power. that the Orange car is making with a 67 millimeter instead of a 72 millimeter and like 15 or 17 less pounds of boost. It's making the same power. Turbo spool's way faster. It's just a better all around setup. And all that is is just, you know, most of it's turbo technology. MitsuTimes: world. Right. Crazy how far we've come and what feels like a short amount of time. KEITH LOFORTE: Yeah, it's, I mean, it's, it's night, it's night and day, you know, I mean, what, what you can do now with just a 62, I mean, what, even what they're doing now, which is 62 millimeter turbos, it's a, you know, it's a big difference. And now E 85 is like the standard, you know, whereas back then everyone was kind of just, just getting into E 85, you know, that was like back when. guys were first starting to make into the 500s on pump gas, you know, and that was like a big deal, you know, and then E85 people were just starting to dabble with that a little bit. And then now E85 is just kind of the norm, you know, and flex fuel sensors. And I mean, it's, it's a big difference now to be able to just, you know, before you'd have to switch maps and everything. Now you can just put it on flex fuel. You could put your street car, you know, cause MitsuTimes: Right. ⁓ KEITH LOFORTE: E85 isn't super readily available by me. There are some gas stations, but they're pretty far. So ideally you want to be flex fuel so you can, you know, if you're running low on E85, you could just pump gas in it and be able to get to wherever you're going. Cause the fuel mileage on E85 is not great. No. MitsuTimes: Right. Not great. And last thing you want to do is be on the side of the road and there's not a station that has the 85 for miles. KEITH LOFORTE: Yeah, or be driving with like, you know, a couple of five gallon jugs of E85 with you. You know, that's not really ideal either. You know what I mean? The whole idea of a nice street car is you should be able to just drive it and, you know, if you got to just put pump gas in it to get you going, you know, you should be able to take a trip with the car and not have to worry about planning your trip around gas stations. MitsuTimes: Yeah. Right. Just enjoy it, not have to give a lot of thought of it. KEITH LOFORTE: Yeah, exactly. Yep. MitsuTimes: What's something that people misunderstand now about building a truly fast ⁓ and reliable Evo because that, that and there KEITH LOFORTE: mean? Like you can't really have. I mean, it's going to be what's then the question becomes like what's reliable. You know what I mean? Like it's like, depending on how much power you want to make, you know, at some point you're going to have to be freshening something. You know what I mean? Like you're not. MitsuTimes: Mm-hmm. KEITH LOFORTE: You know, the cars just start getting a little bit less. It seems like the more power they make, obviously they start to get a little bit less consistent and then you're going to have more of the little problems happening. like, you know, it's like, it's reliable to a point, you know, it always seems like when the motor program's working real well, then something happens in the driveline. And then when the driveline gets figured out, then something. now it's back to something now happened to the moat. It seems like with the higher stuff, you're always just chasing something. for someone nowadays, if you wanna build a drag car, the first thing I always recommend is spend the money and get a proper wiring harness. Don't use your 20-something year old wiring harness, you know, if you're going to build a full drag car, just rewire the whole car, start from scratch. And then that's going to help because you don't want to be chasing wiring issues on a 20 something year old harness. You know, that can just lead to all sorts of, you know, other issues. MitsuTimes: Definitely been there before myself. That's not a fun time. KEITH LOFORTE: Yeah, yeah, yeah. mean, yes, it's expensive to do a harness, but if you get a proper harness and get the car wired, you know. everything done properly, not just the engine harness, do the whole chassis harness. If it's a full drag car, of course, you know, to have a street car chassis harness rewired like properly, that would be really expensive. But on a drag car, you know, get the engine harness done. Any of the chassis stuff you need to start with everything fresh and then grounds, grounds, grounds, know, add extra grounds. can't have too many grounds just to be safe. MitsuTimes: I really feel like a modern, a new wiring harness just takes away so many what ifs, so many variables of your car breaking possibly. KEITH LOFORTE: Correct. Yeah, I mean, have issues. If you have a wiring harness issue, mean, we've had cars where you're chasing some weird intermittent, you have some real weird intermittent stuff going on and stuff that's super, super hard to explain. One pass, it's fine, the next pass, it's not. And then now you're, checking all the wires and trying to chase everything. I not that you couldn't have an issue. I've seen brand new harnesses have an issue because something's wired wrong or something, but those are few and far between. MitsuTimes: Mm-hmm. What Keith, do you think that the Mitsubishi scene today is healthier or weaker than it was 10 to 15 years ago? KEITH LOFORTE: ⁓ well. If you, mean, you would say weaker only because they're not producing any cars anymore. You know what mean? Like that. Obviously the healthiest that ever was, was, you know, ⁓ three, ⁓ four, ⁓ five, ⁓ six. When the evil eight and nines were out. ⁓ but as the years go on and the, know, it's just now there's less cars guys are parting them out or they're, you know, with the way the. MitsuTimes: Exactly. KEITH LOFORTE: The metal is on the Evo chassis, they're rotting out, and now it's just less and less cars. So we're starting to see more and more Evo 10s now, ⁓ only because there's a lot more of them floating around than there is the eight and nine. MitsuTimes: for sure. Even those, feel like there for a while we were seeing a lot of those and now they're starting to taper off as well. KEITH LOFORTE: Yeah, I just don't see a lot of guys making like a full drag Evo 10 ⁓ versus the eight or nine, you know, like there are some of them definitely a hundred percent, but you know, most guys, when they have a 10, they keep it to like a street car basically. MitsuTimes: So your work has always been known for cleanliness, attention to detail, and just precise craftsmanship. Do you think that social media has changed customer expectations when it comes to fabrication quality? KEITH LOFORTE: ⁓ yeah, I would say definitely. Yeah. mean, it's the same thing, you know, with the technology as far as, ⁓ turbo technology, it's the same thing with the welding as far as, know, now I'm welding 20, probably 25 years or something, 24 years or something. It's, you know, back then we just had a gas lens and it wasn't like small cups and you know now with the just the cups you can buy now for the welding it just it makes you know back then it was hard to get a nice like you know rainbow on on the welds I mean obviously you could do it but it was just harder then you had to have a lot more technique versus you know now like you have a giant flooding cup like you can you can make you know you you can make it you could still make it look good versus, you know, then with a gas, the smaller gas lenses we had, it's like, if you didn't have a good technique, the weld wasn't coming out as aesthetically pleasing as it is now, you know, but I mean, the difference is there's a lot more people welding now than when I first started, you know, so, and a lot more people that are really, I mean, MitsuTimes: ⁓ KEITH LOFORTE: really good at welding. I I've been doing it 20 something years. There's guys I see pictures, they've been doing it three and they're already better than me, you know? So it's kind of crazy. MitsuTimes: It is, it's amazing that I feel like not that long ago we didn't, you you had to know somebody who knows somebody who knew somebody who was a welder. Now it's like everybody has at least dabbled in it or can do a little bit of it. So it's kind of crazy. ⁓ KEITH LOFORTE: Yeah, yeah, there was no, there was no like YouTube video, you know, like, got shown how to weld like a quick welding thing, you know, like here and there, like I didn't take a course, you know, but I had two people that like would show, you know, I'd ask questions, they'd show me. And then I just started, you know, taking anything I could get my hands on, any sort of like leftover pipe and just cutting it and welding it and just doing that over, you know, and then just kinda, cause like, MitsuTimes: Mm-hmm. KEITH LOFORTE: When it comes to like welding technique, like what I've learned, because I've taught a bunch of people over the years how to weld, it's like what works for me doesn't necessarily work for them. So I just kind of had to figure out what worked, what looked good, like what I could change. And then I was probably welding a while before people were actually then starting to put like YouTube videos up and showing. you know, their technique, but you know, not, not everybody's, you know, that's why you'll see when you see a bunch of people welding, like people have different styles, you know, and it's just whatever you're comfortable with. But the thing with welding is like anything else, it's even like drag racing. If you want to get good at it, you just got to keep doing it over and over, like repetitively over and over and over. I mean, I spent a while. MitsuTimes: Mm-hmm. Yeah. ⁓ KEITH LOFORTE: before I would even weld on like a customer's car. You I just was welding until I felt comfortable where it was like halfway decent to where I would even attempt to do a customer's car. MitsuTimes: It's whatever the equivalent of seat time is for welding, Yeah. KEITH LOFORTE: Correct. Yeah, yeah. It's more like, ⁓ you know, just like repetition, you know, just keep doing it over and over. mean, it's like anything else. Like with welding, you'll never get like the perfect weld. You're always trying to get a perfect weld. You'll never get an absolutely perfect weld. There's always somewhere you can improve. So it's like, you just, I've been chasing the perfect weld for 20 something years. You know, you'll never get it. You'll get close, but you'll never get it, you know. MitsuTimes: Mm-hmm. KEITH LOFORTE: Perfect. MitsuTimes: Well, Keith, for you personally, what's one fabrication shortcut that you just refuse to do, even if it saves time? KEITH LOFORTE: ⁓ Not that I refuse to do it, I just try to avoid it unless a... I have no choice but I have to do it or B, if the customer asks for it, then I'll do it. But I just, I'm not a fan of pie cuts. don't like them. I don't really like the way they look. I just think it's just more efficient and easier to just, I mean, now you can buy a tight radius bend. So, you know, like I said, I've been doing it 20 something years. I can probably count on my two hands the amount of times I've used pie cuts in that many years. You know, I've built a lot of different exhaust turbo setups, some stuff that's extremely tight. And I just about never use pie cuts. You know, if someone asks me, I'll do, you know, if someone that's, know, listen, the customer is always right. If that's what they want, I will do it. But a pie cut setup is going to be a lot more expensive because it's a lot more welding and it's a lot more prep. It's a lot more work. MitsuTimes: seems like a lot more room for the potential for failure too, I would think. KEITH LOFORTE: Yeah, mean it's a lot more welding. You know, you could have one of those welds fail, but it's, mean, that's the only thing about pie cuts. It's like, if you have to do some weird compound bend where that like has to twist and turn and you know, that would be a case where it might be easier to do pie cuts. But most of the time I can do it out of a regular, you know, a regular setup. MitsuTimes: Yeah. So when a customer first brings you their car for the first time and you're looking for the signs of, know, if you want to even get involved in a build, what's something that you look for right away that that's kind of a sign of, yes, this car has been built properly or no, I don't want anything to do with it. KEITH LOFORTE: I mean, you can usually tell as soon as you pop the hood, just from looking at the engine bay and the wiring harness, you know, if everything's just kind of mismatched and the wiring harness is kind of pulled apart or, like you can usually tell just from, you know, popping the hood. What's what, you know, sometimes you'll see cars like they're rough looking on the outside, but the engine bay. You know, it's pretty decently put together and those cars, I understand it's like, they're starting with the interior and then you may get that straightened out. And then the last thing they're going to do is, know, get it painted or get body work or, know, whatever, whatever you're going to do. You know, the, the tough ones are the ones that, you know, it's changed hands multiple times. Six other shops have worked on it and then, you know, either they can't find the issue. And then, you know, a lot of times it's like. MitsuTimes: Thank you. when you were in the car. KEITH LOFORTE: people want you to just like wave this magic wand and just it's fixed, you know, which is never the case. like when you're trying to chase an issue, like I always try to ask them a bunch of questions. Like, you know, if somebody calls me and says, you know, my car, I'm having an issue with my car, but I'll always ask them questions. Well, what were you doing when it happened? What's the last thing you did to the car? Cause I always go back to whatever the last thing you was, if the car was fine, then you change something and then a day or two later, it started acting up. More than likely it's whatever was just touched, whether it's that actual part itself or something around that area that was touched. You know, a lot of times it could, you know, that'll help, but it's always tough to do cars like that when, you know, you don't know what was done to it before. So you could be chasing a problem. And, you know, there's other stuff that was done to it years ago that actually is causing this problem, but you don't know that any of that stuff was ever touched. You know, it's hard to tell what was ever done to a car before. And unless you've owned it from day one, a lot of times you don't know if it's had, you know, four or five other owners. MitsuTimes: Mm-hmm. KEITH LOFORTE: So yeah, mean, probably the most frustrating thing about owning a performance shop is, you know, people have issues and then they literally just think it's like, you're gonna just one, two, three, you know, figure it out and. You know, then, but, you know, the other problem is sometimes it's like, here's the main problem, but then there's multiple other problems. And it's like, until you clear up the main problem and then all the other problems, the car's never gonna be right. You know, and some people don't wanna spend the money to fix all the problems. They just wanna fix the one quick one that'll, you know. MitsuTimes: Mm-hmm. KEITH LOFORTE: They want to fix the one quick one that'll just get the car running, but you're still gonna be having all these other weird issues and people a lot of times will just deal with that for now because they just don't want to fix it, which is fine. Then the problem is in a couple months when it's having that problem and then sometimes they'll come back to you thinking like, well, you just fixed this. And it's like, yeah, I know I just fixed it, but I told you that. MitsuTimes: Right. Thank you. KEITH LOFORTE: You have to fix this other thing also. They forget. When they come back months later, they forgot that you had told them that. MitsuTimes: They only want to the cheap problem. KEITH LOFORTE: I'm sure everybody that has owned a performance shop all have similar. And they can a hundred percent relate to that. MitsuTimes: late to that. So Keith, you've built a lot of cars, had your hands in many different projects over the years from 4G63, FD RX7s to street evos. What project has pushed your fabrication abilities the hardest? Thank KEITH LOFORTE: I'd probably say... I mean, I'd probably say maybe the FD that I had the 4G63 in. You know, it had been done before in like, obviously a drag car. And like, if you're just building it in a drag car, it's kinda... Easy like another, not easy, but you don't have to worry about, you know, I had a full street car. had air conditioning, power steering, you know, originally I had all the OEM gauges working coolant oil pressure. I had all the OEM Mazda gauges working, but as anybody that owns an FD knows those gauges are notorious. So they all just started failing, you know, one by one. had to keep replacing them with there's a company called Speedhut that makes. gauges that look somewhat similar to the Mazda ones and I was able to modify the Mazda gauge cluster and drop these Speedhut gauges in one by one and it still looked somewhat factory. It took a lot to actually get it, you know, it took some work to get it to fit the way I wanted it but, you know, that worked out. But there was stuff with the, cause I didn't wanna notch the hood. MitsuTimes: ⁓ wow. KEITH LOFORTE: We had to drop the steering rack, lower it, and move it forward to clear the motor. ⁓ And then because of that, now I had to extend the steering shaft. then we had to make, I basically took like a, there's companies that made ⁓ kits for like V8s. ⁓ And I basically bought one of those kits and then we modified it so I could drop the, where the tie rod ends attached to the knuckles. So I could drop it. I mean, I had to drop it really low because I had to lower the, the steering rack so much, but that was a lot of trial and error to try and get that, try and get the steering correct. That was interesting in itself. took a couple variations to finally. You know, at one point I had the whole car together and I had to drop the rack again with the motor in the car. That was one of the more interesting. Yeah. Cause it was having like a bump steer issue, you know, like I had it to where I thought it was good and it still wasn't good. So, um, you know, we had to modify the bump steer kit to work the way we needed it. And then, um, MitsuTimes: Hey. KEITH LOFORTE: We had to move, I had to move the rack again, drop it a little bit lower, move it a little bit further forward. And then that finally, you know, fixed that. But I air conditioning, all the AC lines were braided. ⁓ You know, I had everything working the way it should, but I mean, I countless hours, hundreds and hundreds and hundreds of hours into that car. MitsuTimes: And I mean you did such a good job. It looked like the it looked like it came from the factory whenever you you looked under the hood it was it was so such an achievement to see something like that. I don't know to this day it's still one of my favorite builds. ⁓ KEITH LOFORTE: Yeah, that was kind of the whole point. That's kind of what I wanted it to literally like, you would pop the hood. wanted it to look like it kind of, you know, belonged in there. That's why I didn't want to notch the hood or anything. I didn't want to have to do any of that stuff. I wanted it to look as close to, you know, I mean, obviously it's never going to look like. ⁓ stock, you know what I mean? Because it's a completely different motor. But I wanted it like, if you didn't know that, you know, if you didn't know a lot about cars, I wanted it to seem like I would just pop the hood and it would just look like the car came with a 4G63, you know what I mean? Obviously any normal person would know they come with rotaries, but somebody who's not super into cars would have, you no idea. MitsuTimes: Yeah, for sure. Yeah, I bet if you, if you would have taken that thing to a car show for old people, they would, they would have had no idea that engine. KEITH LOFORTE: Yeah. Yeah, yeah, MitsuTimes: So Keith, now that technology has moved so fast and the fabrication techniques have changed and adapted to what's available, are there any new fabrication techniques or tools that have changed the way that you work? KEITH LOFORTE: ⁓ So for me would be. There's a collector cutting jig that I've been, I mean, I've used it since he first started making it, which was a long, a while ago, but ⁓ it's LPS. It's like Linder, I think it's Linder Power Systems or it's LPS. was, I think when I ordered it, maybe it was LPS Fab, but ⁓ it's a really nice collector cutting jig. can basically change the angle. it's, you can do any, you know, I basically, some of my turbo kits have different collectors depending on how much room I have. So I can basically use the one collector cutting jig and I can make every collector just with that one jig. MitsuTimes: Wow. KEITH LOFORTE: Yeah, that's one of my probably favorite tools I have. And the one that changed, I used to have multiple jigs, one for each collector. Now I just have the one jig. It saved a lot of room also just storing all the jigs. MitsuTimes: That's the thing. So Keith, in your mind, you you, I think you do such a good job on the engine bays themselves. mean, obviously you can build anything and do anything on a car, but the engine bays you always have, you know, your touch is always to make it look just like it's factory fresh. It's shaved, but it's not, you know, it doesn't look out of place. So in your opinion, what separates a pretty engine bay from a genuinely well engineered. KEITH LOFORTE: I mean, if you start getting into pretty engine bays, it would be when guys start to shave all the holes, the holes that you're not using, you ⁓ I mean, that gets into... MitsuTimes: You what it's like to be a Craig? Mm-hmm. KEITH LOFORTE: That's when it starts getting, know, shave bay, they can get expensive, you know, depending on how crazy you're going to go, you know, with the shave base. don't like the crazy shave base where like they reshape and, but I like when guys like take an Evo bay, figure out what holes they're going to use and then just get rid of every other one and, you know, smooth them over. the least amount of body filler, you know, the better, like on my drag car. I welded all the holes shut, grinded everything as smooth as I could, know, made plugs, welded the plugs in, tried to get that as smooth as I could. And then I just had the body guy just use. enough body filler to just if the welds had there were little low spots or anything just fill in low spots but I didn't want any like thick body filler in the engine bay that would end up because on a drag car it'll just end up cracking down the road you know MitsuTimes: Thank that makes sense KEITH LOFORTE: Yeah, like everything will start, you know, you'll get cracks here and there. Um, and then besides that, it's like, you know, nice engine bays is like when they have like a nice wiring harness tucked and everything is kind of, you know, the wires are hidden as well as they can be. Um, or, you know, if there's certain spots in the engine bay where you really can't hide the wires, like that's where I would put like, catch can or like radiator overflow or I'd put something to kind of hide. So it kind of keeps your eye away from, you know, your eyes not drawn to that harness. It's drawn to something else. But I also like to, with piping, you know, I like the piping to be routed a certain way, you know, like I like, I don't like when the pipes are just straight with just a little bend and a giant straight section. I always think like really long straight sections just are not like aesthetically nice. So I'll use another bend or two instead of, know, just running a pipe straight for three feet, know, a foot, foot and a half, 18 inches or so, you know, 20 inches of a straight section and then have a bend just so To me, it just looks cleaner. MitsuTimes: Yeah, I mean, and aesthetically pleasing, like you said, because when I look at like when an Evo 10 pops its hood and you see that kind of one straight intercooler pipe come over the top, just doesn't do it for me. KEITH LOFORTE: But the. Yeah. Yeah. So the problem with that is like you on certain setups, can't like. There are ways to do that. You know, like if guys want to pay the extra for like the fab, there are ways to do like a different intercooler setup and you almost run it like I've done them before where you run them like a 2G or like a Acura RSX where you do like, ⁓ I've done them where I've taken the like Evo 10 intercooler and done like a 90 coming out the top and ran the intercooler pipe. back across because I don't like a vertical core looks wise. just don't like the way it looks. I'll do the regular like Evo 10 side to side core and then weld a 90 on the passenger side and have it go towards the driver side headlight. So the intercooler pipe will come over the top of the intercooler and then it'll turn back. MitsuTimes: I'm wondering. KEITH LOFORTE: at the core between the headlight and the radiator. now you have to do, usually you have to either shift the radiator over or do like a custom radiator. ⁓ Obviously then same thing with the air, you know, at that point you really don't have air conditioning, you know, and I'll run the intercooler pipes. It'll come out ⁓ and just go straight back basically to the turbo. You know, it'll have a little S bend in it so you see it, but it'll be, instead of coming up over the top of the engine, it'll run down the side of it. It basically looked like the way like an Evo 8 intercooler pipe is, you know what mean? It'll come around like that. So you'd have like the intercooler pipe coming out of the throttle body the same way the stock one is. come out, the throttle body go down around to the intercooler. You know, the other one would come up MitsuTimes: Okay. I like that. KEITH LOFORTE: go back over the top of the intercooler and then 90 right before the headlight and head into the engine bay and back up to the turbo like that. It looks a lot cleaner, but it's a lot of pipe and it's a lot of extra, you know, it's some extra work to get it to go, you know, cause like I said, either you have to move the radiator over or sometimes you have to shorten the radiator. You know, there's a bunch of stuff that has to get done to be able to do it. MitsuTimes: I definitely have to keep my eye out and ⁓ find one of these that you've done because that already sounds a lot better. KEITH LOFORTE: Yeah. See certain stuff, like if you have like a certain intake manifolds on the Evo 10, they stick up higher than other ones. So, you know, if you're trying to do like a three inch intercooler pipe, if the intake sticks up, intake manifold sticks up too high, it's hard to run a three inch intercooler pipe over the intake manifold. You just don't have the room ⁓ to do it. And then for something like that would be where then we would opt to run the pipe the other way. MitsuTimes: And then Keith, on our first episode, we talked about, ⁓ you know, you had started to see some Evo 10s here and there. Have you been, have you seen more serious interest in the Evo 10s? people been bringing them more, bringing them to you more to have builds done? KEITH LOFORTE: ⁓ as far as big builds, ⁓ I wouldn't say the Evo 10 guys are go. mean, so we did, we did finish one the end of last year. and he's got a sequential trans and I mean, it's a, it's got all the good stuff, you know, aluminum rod short block and he's got a MitsuTimes: Mm hmm. KEITH LOFORTE: 76, 85 and he's got all the goodies. It's in the like sportsman, V-band inlet and outlet housing. It's fully built. So that car made, I think maybe 1300 or so, 1200 or 1300 horsepower. ⁓ But he's been kind of roll racing it. But I think this year he's gonna, he hurt the trans in at Texas 2K, so he's fixing that. And then I think now he's going to actually start to drag race the car. ⁓ So like we've done that one and I've done another one, a street car that one made around a thousand horsepower for a street car, but ⁓ he doesn't really drag race. It's just more of a like fun street car for him. ⁓ MitsuTimes: Hell yeah. Yeah. KEITH LOFORTE: But then besides that, it's all like the same with the Evo 8, know, 7800 horsepower builds, you know, keeping it right around there. MitsuTimes: We see a lot of those kind of same mindset with the Evo 10. You think it's just because the Evo 10 just kind of seems more like a street car because it's like more comfortable. KEITH LOFORTE: I mean, yeah, it could be that, you know, they're heavier. And it seems like I would say the Evo 10 definitely would be like a more comfortable like street, street cruiser. But to me, the Evo eight and nine just feels more of like a raw like street car, you know? I had a 10 as a daily for a while. ⁓ I've had multiple eights and nines as a daily, you know. I would definitely say the 10s like a more comfortable cruiser, but I like the 8 or 9 better overall. The problem is now trying to find a clean one, you know? MitsuTimes: Well, you one thing that I think is interesting, Keith, is we not even, you know, a year or two ago, we talked about how no one's building the Evo 10s because they're so expensive. And now the eight nines are more expensive, but we're still not really seeing a lot of drag, serious drag Evo 10 build. So. KEITH LOFORTE: Right, you've seen like ⁓ the price on the eights and nines now is kind of crazy. That market's on fire right now. The tens, I mean, you could pick up a real clean low mileage 10 for way less than you can pick up like a high mileage eight. It's kind of crazy. I mean, you know, a lot of guys kind of sleep on the 4B11. a good motor. It can make a lot of power. You know, it's just when you want to make decent power, you just have to sleeve it. MitsuTimes: Yeah. And, ⁓ you know, I really think that maybe people thought that the English racing 10 and the, the grade eight garage was kind of a fluke. And then it seems like Rafe went out and ran sevens with the 10 and now people are like, ⁓ okay. These things are pretty cool. KEITH LOFORTE: Yeah, Rafe's kind of crazy. It's like he just kind of put that thing together and it just went fast immediately. Yeah, I mean, it's a good motor. know, think Dave from Head Games said the 4B11 head flows something similar to like, he was comparing it almost to like a K-Series, which is crazy, you know? I mean, obviously once it's fully ported and everything, but the thing with the 10 is once you start making any sort of power, you know, gotta, they just have issues. Once you start. MitsuTimes: and Yeah. KEITH LOFORTE: putting a heavier valve spring in them, they just start having issues with the MiVec. So on the bigger horsepower stuff, we always just delete. They do the Magnus delete, but the problem is it's just real lazy down low. mean, for a drag car, it doesn't matter, but for a street car, it kind of sucks to lose that low end. So on 700 or so horsepower cars, we try just deleting the exhaust MiVec, keeping the intake, unless it starts giving issues, then we delete them both. But when you delete the two of them, thing is a real dud down low is the problem. MitsuTimes: But in your, I know you said that the 8.9 is the better kind of street platform. Do you think that that's still the platform of choice if you wanted to do a serious drag build? KEITH LOFORTE: ⁓ MitsuTimes: I'm going to. KEITH LOFORTE: I mean, it's hard, it's hard to say. I mean, the tens, obviously you look at what race has been doing with it and what English did with theirs. It's like, the 10 is definitely capable. You know, I would think it would come down to. like at that point, you know, money, like if you can, if you get an Evo 10 roller for real cheap, you know, it might be financially better. You know, the problem is now what they want for an Evo eight roller is crazy. So to like get a roller and bill and then what they just want in driveline parts alone, you know, like just buying a long block now, like if someone has like a valve covered the oil pan Evo motor, it's going for. an insane amount of money. it's like, you know, if you're trying to, you could probably build a 10. If you're starting with the car, you could probably build a 10 for less. You know, you go back to five years ago, it was, that's a different story, you know. MitsuTimes: ⁓ yeah, no doubt. Do you think that the 46.3 has kind of hit its ceiling? You think we've squeezed all the juice out of it that we can? maybe not. KEITH LOFORTE: No, think it's, you know, with the way we've been progressing with everything, I just think it's, it's, mean, it's not going to be leaps and bounds, but it's, you know, it'll continue progressing. As long as guys like, you know, boost in and rave, keep pushing the way they are, you know, it's gonna, it'll keep progressing. Guys will keep figuring little stuff out here and there. MitsuTimes: Yeah. That's certainly what we hope for. I know we didn't prep for this, Keith, but do think that we'll see a six second Evo? KEITH LOFORTE: Yeah. Yep. I mean. with the way Rafe's been getting after it the last couple of years, would not surprise me in the least. I would not be remotely surprised. I if anyone's going to do it, it's going to be him. MitsuTimes: One thing. KEITH LOFORTE: I mean, he's one of the only ones that'll consistently go to the track and keep pushing it. yeah. I mean, that's. MitsuTimes: Absolutely. Yeah. mean, he's, you know, if he's doing the testing tunes, he's at an event. KEITH LOFORTE: Right. I mean, that's basically what you need is in order to do stuff like that. It's like, can't just, you know, a lot of the four G six three guys just go to the shootout and that's it. Like they prep the car for the one race and then that's it. You know? So the way everyone keeps going faster and faster is do that year round. You know, you have to always be going to the track. It's the only way you, you know, figure certain stuff out. And it's now with the four G six three, it's like, MitsuTimes: That's it. KEITH LOFORTE: making the power that's not hard in a 4G63. Now it's just putting the power to the ground. I mean, have a front wheel drive Honda's cut in one 360 foot, so like one three eight one three nine. you know, now that you, the Evo. It's basically like, you know, now you got guys in the EVOs cutting, you look at what race been cutting like one twos, you know, so you think about. know, like when everyone was doing the trying to get that seven second bounty, you know, I don't think anybody was cutting even close to a one, two, you know, maybe like a mid to low one, three, you know, so just what, you know, it seems like the Evo guys are starting to finally progress with that stuff the way the Honda guys kind of figured out power management, you know, like MitsuTimes: Mm. KEITH LOFORTE: You can't just throw everything at it in first gear. Like that's fine when the car is going, you know, up to a certain point of power that you vote. It'll hold it. But, you know, you got guys, you know, if you're doing an eight, uh, like a burnout to the three 30, you know, you're not, you know, you're not going to be your ET for your mile an hour is not going to be great. So guys are finally figuring out the little stuff that you know, lot of the front-wheel drive guys were doing and they're just taking that and kind of implementing it into an all-wheel drive car. And that's basically, you know, once guys start figuring that out, you know, it's like they make the power. It's just getting the power to the ground. That's all. MitsuTimes: And like you said, we've seen so much ⁓ mindset change when it comes to the strategy of, you know, I guess feathering in the power, adding the power, you know, more. I don't know what the what's the right word. ⁓ KEITH LOFORTE: Yeah, I just, don't understand like why it took the Evo guys so long to figure out like just run boost by gear or boost by mile an hour and just don't hit it all in first gear, you know, and stop the car from just annihilating tire. You know what mean? MitsuTimes: Yeah. KEITH LOFORTE: You know, you had back in the day when we were guys were first going eights, you had guys going eights at like just around 160 and you had other guys going eights at like 170 something running the same ETs, but at 10 more mile an hour, you know, and it doesn't take a rocket scientist to figure out, you know, if things doing a burnout, you know, I don't know, maybe don't use a manual boost controller, you know, maybe, maybe that's the thing, you know, like 2008 we're on. MitsuTimes: Mm-hmm. KEITH LOFORTE: We're running manual boost controllers now, you know, so it's like. You know, guys were doing electronic boosts, solenoids, then doing boost by gear, boost by mile an hour. Now guys are using, ⁓ like throttle bodies, you know, drive by wire throttle bodies, and they're starting to do that stuff, which is making, you know, a big difference. You know, there's a lot of stuff that has changed that helps. also guys are probably. are now finally starting to do like proper chassis stuff. know, like a cage helps for safety, but you can also start to tie stuff into the cage, like the front strut towers and the rear strut towers, get them to stop flexing. And that also then starts to make the car more consistent, you know, everything else. MitsuTimes: It is kind of weird that we're just now kind of getting into where people think about safety as a forethought. KEITH LOFORTE: Yeah. Right. MitsuTimes: So when your cars were at the absolute top of the 4G 6-Straight platform, was there a lot of pressure on you to keep going out there and pushing it? KEITH LOFORTE: Yeah. Yeah, I mean, of course, when you're, when you have one of the faster cars, it's always, you know, it becomes, you obviously want to be the fastest, but when someone's catching up to you, then you're trying to go back to the track to push your record a little further. When someone overtakes your record, now you want to get the record back. And that's what kind of starts. progressing everything, you know? Like, that's the main thing when everyone did the seven second bounty, that's what, I mean, was, there was multiple cars going back to the track every week just trying to do it, and that's when the EVO, it progressed at that point. Then there wasn't just, one car went sevens, and it's not like one car went sevens and then like that was it, then now one went sevens and then they started falling after that, you know, one, two, three, there was. Multiple cars doing it. MitsuTimes: Yeah, it seemed like that week that it was broken, saw so many sevens after that. KEITH LOFORTE: Yeah. Yeah. Because it's one of those things where it's like, there's three, four, five cars that have everything to run a seven. They just need it all to line up. You know, they, need to put the short track from this run with the back half, you know, from this run and they just got to put it all together. The weather's gotta be right. You know, like everything had to line up, you know, and then You know, guys, as they're pushing the car more and more, going back to the track every week, every week, they're starting to figure out little things with the car. And then that's why it was kind of like, as soon as it happened, think Proko Evo was the first one to do it. And then after that, you know, multiple, multiple Evos did it. MitsuTimes: Yep. Yep. So, you know, back in the day we talked about, ⁓ you know, not really having the best technology when it came to getting data and stuff like that. Do you think that modern drag racing has become more about data and electronics than about the raw seat of the pants kind of tuning and innovation? KEITH LOFORTE: I think the modern stuff has just made it more consistent and reliable. Now, guys, you can run four EGTs, you can run four UEGOs, one in each cylinder. They got back pressure sensors and cooling pressure sensors. I mean, you can just, if you know what to do with the data, I mean, I'm not a tuner, so I know how to review it, but. you know, implementing it as a different story, but someone who's a good tuner, they know what to actually do with that data. That's when you get a car that can run consistent at multiple different tracks, multiple different track conditions, know, just, you know, guys that really go over the data every pass and make changes here and there, or guys you'll see that can go to different states. different tracks, different surfaces, and they're running similar times. MitsuTimes: Makes sense. KEITH LOFORTE: But yeah, now with the amount of data you can log now, there's a lot more stuff you can look at, which now makes the motors more reliable and then makes the car more consistent. MitsuTimes: Thank Well, speaking of reliability and consistency, what impresses you more today? An all out record car going for a Hail Mary pass or a nice street driven car that's just reliable and consistent. KEITH LOFORTE: I mean, I like reliability and consistency. mean, I, I love all out drag cars, but I like the all out drag cars that can make more than, you know, one or two passes. Like, you know, go to an event and make, you know, go rounds in the event and the, you know, everything stay together, you know. MitsuTimes: Please. That sense. KEITH LOFORTE: I mean, that's the thing when it comes to, you know, the whole thing with drag racing is that you don't always have to be the fastest. You just have to be able to run, run with the fastest and be able to, you know, make rounds. know, sometimes you can get lucky, you know, just cause you're not, it's, if you ever look at a lot of the, I mean, especially take any of the shootouts, the number one qualifier does not always. win. know what mean? Like, you know, it happens. But, you know, I mean something like Aaron Gregory. I mean that card just goes round after round and that's what's impressive. MitsuTimes: I agree. So we mentioned a lot of cars that are currently out there. Keith, what's currently your favorite Evo build that catches your attention the most right Yeah. KEITH LOFORTE: mean, the most recent one that caught my attention was ⁓ TRC built another street car. You know, he had that crazy fast one back in the day. And then I think AG Autosports built him another one. I think this one's, the old one was yellow. I'm sorry, the old one was silver. I think the new one's white. And. I think it's already putting down some crazy like 60 to 130 times on the street. MitsuTimes: Yeah. And whenever he, he'd recently submitted the silver car slip and, ⁓ I seen that he reposted it and then said, this is not the white car. So, ⁓ you know, that, that must mean that the white car is even more. KEITH LOFORTE: Right. it's probably faster, you know what mean? MitsuTimes: Well, Keith, are there any products that you wanted to release years ago, but you just never had the chance? KEITH LOFORTE: ⁓ so the Evo 10 catch pans, ⁓ I had wanted to do one for a while, but, ⁓ I had a customer going to Texas 2k this year with that Evo 10 and he needed a catch pan. So we made one for that. And then, ⁓ now we'll start offering that, you know, I had a couple of people ask me about that before the shootout for an Evo 10, but I. MitsuTimes: So. KEITH LOFORTE: hadn't been able to make the catch pan yet, so I finally took the time to... make the one for ⁓ for Daniel's car and then I basically just wrote everything down. So now I can make another catch pan. I don't need the car to do it. I could start, you know, same way I do the EVO 8-9, I could do the one for the 10. MitsuTimes: good. If you're listening, you plan on going to shoot out, please get one of these catch bands. What's the turnaround time on this, KEITH LOFORTE: So they're kind of, they're made to order. you know, it depends on how busy I am. It could be two weeks, it could be three weeks, you know, it depends on what I have going on. But usually, like what I did last year towards the shootout was I would do them in like batches, like five, because it's easier for me to do multiple than it is to just do one. So I was doing like, MitsuTimes: Right. KEITH LOFORTE: I did them in like batches and you know, if, I mean, I know what it's like to be a racer and try to make the race so I tried my best to, you know, if somebody hit me up a couple weeks before the shootout, I would try my best to turn it around like, you know, within a week or two, you know what I mean? I was trying to give them time to get it, get it on the car, you know, but. If someone hits me up a week before the shootout, the chances of getting one are, you know, it's not going to happen. So if you're going to do it, just try to get it in. You know, early. The problem is with the price of gas now and shipping, I mean, it was getting to the point where. MitsuTimes: you KEITH LOFORTE: Like I shipped one to California. was like 120 or a hunt because the it's big, you know, so the box is huge. So it ends up, it's not heavy. It's just a really big box. And that's what, you know, the average shipping for the catch pan was 80 to like $110 for the ones I shipped last year. So I can only imagine this year, they're probably going to be even more money. MitsuTimes: sure. And I hate to volunteer them without asking them, but maybe you could sweet talk Evo Dan into bringing it to the shootout for you if you order it from... KEITH LOFORTE: He actually, ⁓ I actually talked to him about that. He actually, ⁓ I think it was him or, or rich had offered to bring, to bring some out for guys. the problem is you got to like getting it mounted. You kind of want to do that like pre cause you got to drill some holes, this and that, you know, so for guys, like if you got it the day of the event, it'd be hard to get it all up and mounted. And cause Basically, like if you have a stock subframe, the mounting is going to be different than if you have a diamond subframe, which is going to be different than if you have a Voodoo, you know what mean? Like every kind of subframe, a Magnus, it's all going to mount a little different, you know? And if you have like a stock subframe, you don't really have to like weld brackets or anything because it just uses the bolts that are already there. But if you have like a Voodoo subframe or Magnus or one of them, you have to do some sort of little bracket coming off the subframe welded to be able to mount the catch pan is the problem. MitsuTimes: Okay. Well, still get your orders in ahead of time. Get it on there. KEITH LOFORTE: Yeah. Yeah. And then the only other thing I wanted to do for all, which I finally ended up making was for the Evo eight and nine, um, now that the sportsman turbos are becoming popular, the 70 now it's a 70, it was a 72 85. Now it's a 73 85, 76 85, 80 85, 82 85, 83 85. That whole T four set up. with the bigs, the V-banded compressor cover. Now we have a forward-facing kit, twin wastegate with a four inch up pipe that clears the stock radiator support. So obviously you have to run a small radiator, but you don't have to have a tubular subframe. You don't have to cut apart your upper rad support like everything clears. MitsuTimes: Mm-hmm. KEITH LOFORTE: I mean, most guys that are running that usually are already going to tube their lower rad support or something, but you don't have to, you know, there are guys that run the stock rad support and keep it like that. It'll clear all that stuff. Yeah. And then it's four inch hood exit with twin ⁓ dump tubes out the hood also, you know, so all three pipe, all three come together and right out the hood. MitsuTimes: ⁓ sure. doesn't get any better than that. what would you say is your most popular product right now? KEITH LOFORTE: Yeah. I'd probably say our standard placement EVO 8-9 V-Band inlet outlet hot parts kit. MitsuTimes: Keith, I know that we harped on this in the beginning, but just I want to reiterate and confirm with you. Has your customer's goals changed over the years? Are people chasing more drivability more so than they were peak horsepower years ago? KEITH LOFORTE: I mean everybody kinda... A lot of people just kind of want to make the most power they can, but it's becoming more of like a within the budget kind of thing. Most guys have now become more realistic in that seven to 900 is usually. Most, most guys goals, you know, we, do have guys that want to make a thousand plus, but the majority are in the seven to 900 range, you know, just like a, a nice street car. MitsuTimes: Mm-hmm. what's next for BeanFab that people might not know about yet? KEITH LOFORTE: ⁓ what's next? MitsuTimes: Yeah. KEITH LOFORTE: That's a good question. mean, I'll probably be doing something along the lines with the Evo 10. Like I have a V-band inlet and outlet for like the... smaller style V-Band, is like, be like a 62-66 or 67-66 or 64-66. Same thing with like the HP, HPT turbos, like the smaller Zona stuff. ⁓ And I had done a T4 kit at some point, ⁓ but I'm probably gonna take that kit and make a changes. MitsuTimes: Okay. KEITH LOFORTE: And then, cause I haven't released the T4 kit, I've always just done the, because when it comes to simplicity, you know, V-band inlet and outlet kit, you run one waste gate, it's not as heavy, it's easier, everything about it. You know, trying to get those four bolts on the T4 flange is like, it's a pain in the, it's a pain in the ass. And to me, like, MitsuTimes: and KEITH LOFORTE: The V-Band inlet and outlet housing makes more than the T3, like the smaller V-Band, which they call like the quote unquote T3. inlet V-Band that size, the V-Band housing makes more power than the T3 housing. I know, I was saying that for years. think Real Street finally came out with like a dyno comparison showing it. But to me, I've always liked the V-Band housing better than the T3 anyway, because you're not dealing with four bolts that are going to rust. MitsuTimes: Mm-hmm. KEITH LOFORTE: You know, the V-Band, it's much easier to install. It's much lighter. It's cleaner. And same thing with the T4. You know, now they have Precision HPT, all those companies, they all have like a T4 style V-Band inlet. It's just a bigger V-Band inlet housing and like. I think that's also the much better option than just doing a T4 style. Evo 8 and 9, ⁓ I have that T4 style ⁓ for the forward facing if you're going to do a big turbo. ⁓ like the 72 or 73, 85, 76, 85. But the majority of the kits I all do are V-band inlet and outlet. You know, that seems to be the most popular. And I try to even, when people talk about buying a turbo, I try and just tell them the same thing. Just don't get the T3, just go right to the, you know, get the V-band inlet over the T3 inlet, you know. So, but with the Evo 10, I'll probably end up redesigning the T4 kit and then I'd also like to make the larger V-band kit also and jig that up so I could sell that. MitsuTimes: Okay. It's funny that you mentioned, you know, struggling with those rusty bolts, because I definitely think that should be the selling point every time for switching to V-Band. You no longer have to struggle with them bolts breaking and all that stuff. It's easy on and off. KEITH LOFORTE: Yeah. And for anybody that's done the T4 stuff, the one bolt is really tricky to get to. know, it's not easy to get a wrench or anything on. the two of the four are easy. It's the last two, you know, but the one is real tricky to tighten up, especially like if the turbo's in a certain spot, it makes it real hard to get to. And you know, have like the V-band seems to be more leak free if it's, you know, welded correctly and everything. But to me, like V-band's always been the best, especially for like exhaust. It's like, you know, V-band is just the move. It's so much easier and cleaner to work with. No gaskets, none of that stuff. MitsuTimes: Thank you. Well, Keith, one thing that I know that you were a big fan of back in the day was the forum era. So I want to talk about how much better the DSM Evo forum era was over social media today. KEITH LOFORTE: ⁓ boy, yeah. I mean, when EVO-M was at its height, I mean, it was jumping. mean, if you weren't around then on that forum, it be hard to explain. mean, everybody was on that forum. I mean, everybody was on that forum, you know. ⁓ And that's where a lot of like the competition started, you know, a lot of it. You know, there was a lot of friendly competition on there, but there was also a lot of, you know. There was a lot of other form wars and whatnot going on, but you know, it did start a lot of friendly competition. also, you know, that's how everyone was doing the tri-state. Evo stuff and, know, depending on where you lived, you could easily find other Evo guys in your state just based off. the EVO M forums and I mean they were super popular. mean we used to be on them all the time, you know, and basically all the big shops were, you know, would do sponsorships and stuff like that. It was, I that was, I would say like the golden era of EVOs was when EVO M was jumping 0304, probably 2003 up till probably like 2010 or so. was when it was at its peak. MitsuTimes: This is back before you had the internet on your phone, so you had to go to computer so you could purposefully talk. KEITH LOFORTE: Absolutely. Yeah. Yeah. Yeah. Yeah. Yeah. Now you can kind of like, you could like, you can race and update at the track, you know what mean? Versus like back then you would race and then whenever you would get home or the next day you could actually post about what happened. MitsuTimes: ⁓ yeah. Well, what do you think was kind of the wildest, the weirdest thing from the early 2000s Mitsubishi scene that newer people getting into these platforms just wouldn't believe? KEITH LOFORTE: probably just the actual sheer amount of, I mean, if you were in the tri-state area, like where we are, know, New York, New Jersey, Connecticut, just the sheer amount of events that we used to have. mean. MitsuTimes: Mm-hmm. KEITH LOFORTE: We would race like, you know, you could run 12 to 14, maybe 15 events a year without leaving the tri-state area. know, English town was having, at one point they were having two events a month just at English town. You know, one, they would do, you know, one big event usually, and then there would be like a smaller event, like a, you know, one bigger event as in like a two day event. And then. there would be like a smaller event, like just like a one day event usually, but around two events a month. you know, and then that was also when there was like, you know, back in the day, you'd have like, Nopi, you'd have Battle of the Imports, you know, you'd have IDRC, ⁓ English Town had its own series. ⁓ I mean, there was just a ton of events to MitsuTimes: Mm-hmm. KEITH LOFORTE: to choose from. MitsuTimes: Yeah, it definitely seemed like in the forum days there was always something going on and you know in the Facebook era maybe there's stuff going on all the time but I just don't see it or have it in front of my face as much I guess. KEITH LOFORTE: So there's some new events now. ⁓ As far as like if you had an Evo and you wanted to race, it's just, you you gotta do a lot more traveling and it's just not as many events. You know, there are events now, it's just not like it used to be. MitsuTimes: Well, back in the day, Keith, people were kind of figuring these cars out in real time. know, people bought a 03 Evo brand new in 2003 and then, you know, we're just kind of testing things out and see what worked. Do you think it was more exciting back then than, know, nowadays we kind of have the formula to get to nines? KEITH LOFORTE: Correct. Yeah, it was definitely, mean, listen, everyone always looks back and they're like, ⁓ that was the goal, you know, but to me, a hundred percent, it was more exciting back then because you were getting into a new platform, trying to figure out what worked and what didn't work. You know, a lot of guys, you know, we were, we picked the car up from the dealership and just bring it right back to the shop or guys were picking them up from the dealership and going right to the track, you know. pick it up on a Thursday and Friday night, you know, they're already drag racing it. ⁓ and then it was just like, it was a race to get into the 11s at that point. MitsuTimes: Crazy. KEITH LOFORTE: But guys were, you you had a basic formula because it was very similar to the DSM, you know, the 4G63 engine, you know, it's the same, the same engine, but you were taking like the DSM mods, you know, everyone was kind of following that same formula. You know, the difference was there wasn't really any engine management in the beginning. So we were kind of just like wiring and we were wiring in super AFCs. MitsuTimes: great project. KEITH LOFORTE: And then you would either run like a Hallman boost controller or you know, if you were, if you spent, if you really wanted to spend the money, guys would get like a, they would do the AFC and then the ABCR. But with the Evo is just easiest just to run and like, ⁓ just to run like a Hallman boost controller was the easiest thing. You know, you would just put a Hallman in it and then an AFC for fueling and then. Eventually, they came out with like tuning software, but it was. real, you know, kind of basic. I think it was tech, tech Tom, maybe it was expensive. I remember it was like, I don't know, 5,000 or something to get the, to get the software from what I remember. ⁓ And then that's once you could like change timing and everything, then the cars started to, you know, they started to progress and then MitsuTimes: Whoa. Thank KEITH LOFORTE: when they really started to progress would be like when the AM standalone came out for it. MitsuTimes: Yeah. KEITH LOFORTE: then you really start to see the cars progress. MitsuTimes: And hopefully that was a lot more affordable when that first came out. KEITH LOFORTE: Yeah, I'm trying to remember. mean, I don't remember. was over a thousand bucks for the AM, which, I mean, wasn't bad for what it did, you know? Yeah, but back then, like a tune was a lot cheaper. I think it was like 2000 installed and tuned or something, isn't terrible. But tuning, guys weren't charging as much for tuning back then either. MitsuTimes: ⁓ okay. Yeah. They were still figuring it out too. KEITH LOFORTE: ⁓ yeah, yeah, big time. MitsuTimes: Well, Keith, like early on, was there a car or a build that that motivated you to want to make your Evo faster? you KEITH LOFORTE: So I guess it would really depend on ⁓ when, like what year we're talking about, you know what mean? But when I first got into DSMs was probably, I think I got my DSM in 1998. ⁓ And then the first time I went to the track, you had like, MitsuTimes: said. Mm-hmm. KEITH LOFORTE: Jeff Hill who was working on my car then, ⁓ his DSM was around an 11th. ⁓ John Shepherd was out there with his car ⁓ and a bunch of the other guys running like, so back then, Levens was, I mean, Levens was flying back then, you know? So just seeing like those guys' and just, you know, that kind of motivated me to be like, you know, I'd like to keep pursuing this, seeing how much faster I could get. You know, the problem was I was in college then, I really didn't have a lot of money. So my car was just a basic, ⁓ MitsuTimes: Yeah. KEITH LOFORTE: you know, exhaust, boost controller, you know, and then eventually 16 G and a front mount, know, but nothing, nothing crazy. You know, it took, you know, it took years. I had to finally, you know, get out of college and then, you know, I started spending a little bit more money on the car and then it, you know, started going faster. But, you know, I mean, back then, if I would have had something catastrophic happen with the motor or something, you know, I would have been, I don't know what I would have, I don't know how it would have MitsuTimes: Mm-hmm. KEITH LOFORTE: put a motor back in that thing, What I had to been like selling kidneys or something. MitsuTimes: You KEITH LOFORTE: You know, it wasn't until I started. like working on the cars and like making like side money is when my car started to get a lot faster because then I was actually able to like put some money into the car to make it faster, you know. But yeah, seeing like back then 1998, seeing like multiple 11 second cars was, you know, and a lot of those guys, the setups were like super clean. Like Jeff's car was super clean as far as like the way the engine bay was, the car, the whole car, you know, it was just put together. Nice, like correctly. even back then I was realizing like who's, who, whose cars, the engine bay and everything looked really good. like, you know, who cared about the way stuff looked and who just cared about going fast and could care less about, you know, what the engine bay looked like. MitsuTimes: And, you know, I guess there's, there's a compromise somewhere in there, right? KEITH LOFORTE: Yeah, you know, mean, some guys thing is like, I don't really care about what it looks like. just need it, you know, to go fast. But the thing is like, if stuff's just kind of thrown together, that's also usually going to eventually lead to more issues here and there. You know what I mean? Like to me, the cleaner and everything it's kept the, you know, the neater and cleaner everything is it's more of a MitsuTimes: It is like community-based. Yeah. KEITH LOFORTE: you can figure stuff out on the car easier. It's always been the way I thought of it, but it might not be true, but that's how I feel. MitsuTimes: Thanks. Well, Keith, we talked about forums and all the crazy kind of electronic devices that were used early on. But for you looking back now, what part of the quote unquote golden era of DSMs and EVOs do you miss the most? KEITH LOFORTE: Probably. So like when I first started out, you know, we would all go to the races. I mean, there was probably. MitsuTimes: So, that's the party, know. KEITH LOFORTE: eight to 10 of us that all had the same 1G DSMs. mean, some version of the 1G DSM, whether it was the Eclipse, Talon, Laser, all-wheel drive, and we would all go to all the events. if we had 12, back then you could have 12 DSMs and they would have an all-wheel drive class. So it would just essentially be like all of us. racing each other, you know, which was always fun. So you'd spend the day at the track, but a lot of times we would go out the night before and then we would all sleep. We would all just crashed our buddy's house and then leave from his house and go to the track. ⁓ so was like, you're almost like making a weekend of it. And then the shootout, would all caravan out to the shootout together. stuff like that was fun. You know, we're constantly either going to test and tune or events together. I mean. MitsuTimes: Mm. Thank you. So. KEITH LOFORTE: every week. If we weren't at an event, we were doing a test and tune. And it was usually always anywhere from like four to like 10 of us, sometimes more. MitsuTimes: That's definitely that would for me that would definitely be the good old days right there. KEITH LOFORTE: Yeah, and then it's like motivating, you know what mean? Like if maybe you really don't 100 % feel like going to the track, but then everyone's like, ⁓ we're all going. So then, you know, you're just going to go. MitsuTimes: Well, Keith, pretty sure I already know the answer, but is there a car that you've built or been a part of that you regret selling? ⁓ KEITH LOFORTE: ⁓ yeah, my RX-7, 100%. I would wish I still had that car. MitsuTimes: I think everybody wishes you still had that car, man. ⁓ KEITH LOFORTE: Yeah, my kids are gonna be driving next year. They wish I still had that car. It's changed hands probably two or three times. Somebody just bought it. ⁓ cause there was a thread up that I, there was a thread I started on the RX seven form and whoever just bought it. replied into that thread that he had just bought it and he had like a Question about something. You know what I mean? So there is somebody that has it now and I think he's Putting it on a fuel tech maybe and rewiring it and putting it like rebuilding the motor and he's doing a bunch of stuff to it so but the problem is like It'd be hard to recognize it now it's painted a different color it's got different wheels on it it's got different wing on it and you know MitsuTimes: ⁓ no kidding. KEITH LOFORTE: looks wise it's not my cup of tea so I wouldn't want that car back I would you know build another one at that point. MitsuTimes: And I think you've said in the ⁓ maybe before Keith, right? That you've kind of thought about it or or test the waters, but the FD parts are just too crazy nowadays. Yeah. KEITH LOFORTE: Yeah. So the FD, like the shells and everything, I mean, it is, I mean, it's, you thought the Evo stuff was ridiculous. The RX seven stuff is crazy expensive. You know, like I would think about doing another one if the rollers weren't asked like through the roof pricing wise. And same as the EVOs, like the interior pieces are really expensive, you know, and I mean, I I had an R1, so it came with the nice, like I had R1 with black interior, so it came with like the nice interior, you know, for me to get that again would be, you know, I'd be paying through the nose for just a roller. I think I spent $5,000 on my roller back then and I don't know what it would cost now. would probably be triple that. MitsuTimes: No kidding. At least. Yeah, for sure. KEITH LOFORTE: Yeah. And it's hard for me to stomach, you know, spend and all that for a roller. And then it's like, you know, but I would, I would a hundred percent like to do something like that. You know, I'd like to do another one of those. mean, I also like, the S 15, like the two forties, but those are ridiculously expensive, you know, I even thought about doing like a MitsuTimes: ⁓ yeah. KEITH LOFORTE: like a Scion FRS or something and 4G63 swap that. But that would honestly, that would be the newest and it'd probably be way, I could probably get a way, I could probably get that cheaper. I could probably get a running FRS for cheaper than I can get a rolling FD. MitsuTimes: That'd be sweet. ⁓ have no doubt. Yeah. For sure. ⁓ KEITH LOFORTE: Yeah, but it's like, you know, doing the FRS and then keep getting, like keeping all the electronics working like factory would be the trick. MitsuTimes: Thank ⁓ yeah. Yeah, because it's probably 10 times as complicated wiring wise as the FD was back then. KEITH LOFORTE: Correct. Yeah. MitsuTimes: Well, kind of on the same subject, Keith, if you had an unlimited budget right now, what would you build? KEITH LOFORTE: see now for talking unlimited budget then I would definitely build another FD 100%. I mean and I know I already know what I would change for the old one so like there's a lot of stuff that I would just from the get-go start out with that you know what I mean so I would definitely build another one 100%. MitsuTimes: changes. can't blame you. there, Keith, has there been like a ⁓ platform or a car that you just never got a chance to build that you always wanted to? KEITH LOFORTE: Yeah. MitsuTimes: I'll see you KEITH LOFORTE: I'd probably say it would come down to the two I was talking about, like the 240 or like the, you know, the FRS. was kicking around the idea for, it's been like, you know, for a long time. Since as soon as I finished the RX-7, maybe a year or two later, I was already kicking around the idea of like, oh, that'll be like the next one I, that'll be the next one I do. You know what mean? But like, MitsuTimes: ⁓ no, good. KEITH LOFORTE: Now my kids are going to start driving the end of this year. So I'll, I would probably, instead of do something for me, I would, you know, do something for them, you know, like whatever they want to build. Like my one daughter's into two 40s. So a four G six three swap two 40 sounds pretty cool. You know what I mean? But now the way I am, it's like, I don't like, she would like to drive that around every day. I don't know that I would, you know what mean? So I would rather. MitsuTimes: Yeah. You KEITH LOFORTE: build it and have her get the enjoyment out of it than me. You know what mean? It would sit parked more than it would driven, you know? MitsuTimes: Yeah, fair enough. Definitely be the coolest person at her school though. KEITH LOFORTE: 100 % MitsuTimes: Well, do you still get the same excitement, you know, from racing and fabrication as you did 20 years ago, Keith? Is that what kind of keeps you in it? KEITH LOFORTE: Yeah, mean, I definitely do. Over the years, it's like the business stuff and dealing with certain customers and this and that, that's what kind of wears people down. But as far as the actual enjoyment of making something, it's still... I've always just liked working with my hands. MitsuTimes: Yeah. ⁓ you ⁓ yeah. KEITH LOFORTE: You know, before we started this, was wrapping up another turbo kit and it's like, I've made countless ones of those turbo kits, but I still actually enjoy making the turbo kit because it's like, you know, the more you make them, you try to make, you know, you see if you can make the next one a little, you know, you can little improvements here and there, you know, and it's just always always like they say always striving for the perfect world it's like always striving just you know just trying to get better with everyone. MitsuTimes: The next one's always slightly better than the last one. KEITH LOFORTE: Correct. Yeah, there's always little stuff you learn along the way. MitsuTimes: and KEITH LOFORTE: So whenever I stop wanting to learn or get better, that's probably when I'll know that's when I need to exit the business. MitsuTimes: Yeah. Okay. Well, that kind of answers our next question then. KEITH LOFORTE: Yeah, I mean my kids like I have twin girls and they're like into it like they're super into it. So that's kind of keeping me more into it. The fact that they you know, like they like the track they like welding. They like cars. They like all that stuff. So yeah, so that kind of keeps me. Motivated, you know. MitsuTimes: ⁓ yeah. That's awesome. ⁓ yeah. Well, Keith, lastly, where can people find and follow you on social media so they can see some more of these cool products and what you got your hands on? KEITH LOFORTE: Mm-hmm. So we have a Facebook page and then are probably the ones that I post the most on. I try to post ⁓ to the Facebook business page, I do every, know, Instagram. It's just BeanFab on Instagram. And then same thing for the Facebook business page is BeanFab. ⁓ But the... Instagram is going to have more posts than the Facebook. I'm terrible on that. always, I'll always post it to Instagram. And then a lot of times I forget then to put it on the, ⁓ the business page. So sometimes I'll miss posts. So if you want to be up to date, the best would be on Instagram. MitsuTimes: Almost daily on there. KEITH LOFORTE: Yeah, I try as much as I can on the Instagram. MitsuTimes: I love it. Well, Keith, thank you so much for taking the time to come on here and share this story. People don't know, but behind the scenes, we lost our complete first take of this. So I appreciate your patience for coming on here and telling your story again. I definitely think people love to hear from you and love to see what you're doing. So I hope that you do it forever. KEITH LOFORTE: No problem, Thank you. Hopefully I will be doing it forever. I don't know what else I would do. I'd be bored. MitsuTimes: Ha Yeah. All right, Keith. Well, have a great night and we'll talk to you soon. KEITH LOFORTE: Thank you. Thanks for having me.