Latest / MitsuTimes Podcast / Ep214: Mitch’s Mitsu Fleet
Transcript
- MitsuTimes: So Mitch, which track would you say has challenged you the most? What's going on guys. Welcome to another episode of the Mitsui Times podcast. My guest today is Mitch Chuby. He is the owner and driver of a whole fleet of cool Mitsubishis. How are you today, sir? Mitch Chubey: doing quite well thank you. MitsuTimes: Good, good, good. Well, I think we should just get right into it, Mitch, because we got a lot to talk about. Give us a little introduction and tell the listeners about yourself. Mitch Chubey: Well, I started out with cars from a young age. My father was into Volkswagen's and he's got quite the little assortment of it from Baja bugs to other Beatles and motors and trans and things like that. So that's probably where the spark started. And then we originally raced motocross. So that definitely fueled the whole motor sports part when I was a kid. And then as I got older, I branched off into mountain biking. free ride and then that turned into a profession for 15 18 years something like that and Now it's just with age comes a cage, right? So just moving on to the next exciting thing MitsuTimes: I like it. Well, you, you said that your father was in the VWs. How did Mitsubishi become your platform of choice? Mitch Chubey: I originally really liked I was into the Supras and GTRs you can blame the Fast and the Furious I think I was like I can remember I think I was like 11 or 12 when I came out and we watched it one night at my grandmother's house of all places and it just kind of sparked something in me and then it was actually Gran Turismo 5 a buddy of mine actually had a 2008 MR Evo 10 he was a realtor and he loved it because it had four doors and he could drive drive his clients around but still hauled and could do a bunch of things and he wrapped that one around a pole so he bought another one. I got to drive that one in 2011 I think it was 11 or 12. I got to take it for a little spin because he had always promised me I could drive it and from there I was like okay yeah these things are pretty sweet and then I just remember being on Grand Tresor with a buddy we used to have to play co-op and we'd be bottom screen bottom screen or top screen bottom screen and that was always the car we went to that we would race each other on. MitsuTimes: Yeah. Mitch Chubey: It was all things equal and yeah, I still have the save file somewhere. The wife didn't believe me and I had to pull it up when, we first got the first one. I was like, see, I've been playing this for like years. So in a weird way, it kind of manifested that way. MitsuTimes: Yeah, nice. Mitch Chubey: But we got the original Mitsubishi in 2019, which is a Evo 10 MR 2011. And it started all out because the wife got rear-ended in her Mazda 3. And I wasn't really like, I didn't care for that thing. I changed a few little things here and there on it. But it was like, that's your car. I don't want to deal with it. I hate how it drives. It's got electric steering. It feels like crap to me. So when she got rear-ended, she just one day out of the blue was like, babe, I think we should get a race car. And I instantly was like, MitsuTimes: you Mitch Chubey: Okay, well what's the budget? much am I allowed to spend here? And she's like, well, you know, I think we both have good jobs and this and that. And she's like, I don't see 60 being an unreasonable number. I was like, all right, well, 2008 GTRs came out in Canada, they were 69,000 bucks. So I should be able to find one for like 40, 50, I think. Yeah, no, those things have held their value. So anyone who bought one of those is selling them at retail still, even with a hundred thousand miles on them. So then I was looking through the... the ads and things looking at those and she's like, well, babe, you we might start a family. We're going to four doors, you know, something we can put the kids in, you know, something a little more family reasonable. So was like, well, that leaves literally two cars, WRX or an Evo. well, the super is around the question. And yeah, it was just like two days later, I was scrolling through auto trader and I was like, damn it. I found the car and we went and saw it and two days later was sitting in the garage. MitsuTimes: ⁓ wow. Didn't take long to bring her home. ⁓ Mitch Chubey: No, no, she was ready to do so it was it happened really quick. It was just like, ⁓ okay I guess we're doing this then and then it's just kind of small snowpult from there MitsuTimes: So how did you go from there to track racing? it the Gran Turismo again, kind of influencing things? Mitch Chubey: Well, I think it was part of the past with like the whole motor crossing and being a top athlete on the stage and the competitive edge kind of thing. It just needed something. Originally we started out auto crossing it for the first, for the first year and she came a few times and it was cool and all, but like, it was hard for me to justify all day, being there all day for eight 50 second runs. I was like, okay. And then I wanted to do some modifications to the car. MitsuTimes: Hmm. Mitch Chubey: And she was like, well, no, we kind of got to keep it kind of stock, keep it reliable, this and that. Right. And I was like, okay. And then one day just on Craigslist, I was scrolling through and there was a Rally Arthur. It had some Evo parts done to it. And this kid had taken on this project car that he got in way, way over his head. And he had fitted some parts to it and he had a wide body kit and half of it was installed and half of it was drilled. was kind of a mess. And then, so I went, just kind of went and looked at it one day. And I was like, okay, yeah, okay. then, so one thing led to another and went and picked it up and I load balled the guy and he was like, yep, just take it. And he had, then he had a set of wheels, set of Anki's on some R888Rs. And I was like, well, perfect. got some, some track tires to come with it. I'm like, do want for the wheels? He's like, I don't know, 400 bucks. I was like, damn it, I have to buy it. I know I have to buy rally art in order to buy these wheels. Okay. So, and then just kind of snowball from there and then. That became a kind of a winter project, putting it together in some sort of form. He had, he had like the waste gate, solenoid wired backwards. He had the rear brake lines on the front, the fronts on the rear body panels didn't line up. There was stuff missing. Originally the idea was I was just going to try and make it stock and maybe sell it. But then it just kind of went, oh, well, this is a little bit too far gone. So we'll just go from there and it just led one thing to another. I went to my first time attack event in 2020 during COVID and I just kind of snowballed from there. MitsuTimes: like it. Well, Mitch, I was very surprised ⁓ messaging you on Facebook. You know, most people have one project or you said that you have two Evo 10s and two Rally Arts. How did that happen? Mitch Chubey: Well, the last rally arts, the newest edition. So that one, my plan is it's kind of like a trickle down effect because the platforms are so similar. So a lot of things just bolt over. like my car gets the newest and greatest or whatever. And then the wife's car gets a few little things. then, so I got all these stock parts laying around. I was like, oh, and my father needs a new car because he's been driving around this 95 Saturn SL2 thing. That's just, it's loud. It's old. It's I always had a little issue here and there, was like, well maybe you need a Rally Art in your life and he didn't say no. So was like, oh okay, so pick that one up for a steal. needs transmission put into it, but I got enough of those laying around that it's just gonna be kind of a deposit of all the old parts. So like it'll be a fun little car, but it'll be like my C car I guess in a way if I ever blow up enough of them in one for whatever event. And then the other Evo X was actually in a small, I don't know if it was a fender, it got put in a ditch and they were not hard, but enough to like bend the body panels and a few things and broke a couple of suspension arms, but everything else is intact and in place. So it's been sitting on the side of the house on blocks. It's had a few things robbed from it, but like the more originally I wanted to build a, maybe try my hand at rally driving, a good friend of mine. He's the second to the rally world as of late after moving on for mountain biking. So he's won a couple of ARA chips. Now he's over in Europe testing his feet over there. So yeah. And then I read through the rule book and it's like, you can't run the SST because that's what it's got in it. So I'd have to switch it to five speed and do a bunch of things to it. But now that they've changed the rule book in ARA, I can run it in whatever transmission came in the car. So it's open, but... MitsuTimes: Wow. Mitch Chubey: As of late that seems like a big adventure and definitely cost prohibitive So I'm thinking it might get turned into a little endurance car run some of the local races around here Just like just as a seat-turner with a couple of buddies. There's a couple of the lucky dog and champ card They have a couple events nearby so Get some serious seat time in there and just turn it way down I guess because you got to maintain your minimum lap time MitsuTimes: Mm. So four SSD cards total, that's a lot to handle. Mitch Chubey: People say they're made of glass, but I actually haven't had any issues other than something my fault with them like I've been running 500 plus wheel in the time attack rally art for Two years full time and then here and there the first year when I've sorting it out It just comes down to torque management Torque's what kills the clutches, right? is if you can maintain MitsuTimes: ⁓ wow. Mitch Chubey: 360 foot pounds from when the turbo spools to redline you can make 500 horsepower because it's Horsepower is just torque over time You can push it way up top if you have the turbo and the sporting mods to handle it. So it's I've had issues with like overheating like I do have a few extra circuits and bigger cooler and things but it's never been like the I've never had the transmission slow down while on track MitsuTimes: Okay. Mitch Chubey: And I've had it out 20 minute sessions, 120 degree Fahrenheit temps. And it's actually the engine oil that heats up first. MitsuTimes: That's really cool. Mitch Chubey: Yeah, but saying it'd blow out a clutch on the last time attack in the last session last year. So there is a bunch of parts sitting on the shelf. We're ready to go into the box to take a little bit more abuse. That's for sure. Got some Jack's billet clutch forks and a big 14 plate clutch for it. So she'll be able to handle whatever I'm probably want to hand or whatever I want to toss at it for at least a while. MitsuTimes: Yeah, sure. Well, Mitch, is it, is it your primary Evo that gets driven the most out of all these cars? Mitch Chubey: ⁓ It's probably the wife's that gets the most it doubles as like a B car and For a long time we were actually dealing it till both the kids decided that they wanted to destroy the back You know chips and applesauce and this and that and her mother so my mother-in-law actually gave her gave us her 2009 Forester base model thing and it had a leaking head gasket to see room so Fixed that up, did some work to that and just it's staying as it is, just stock. It's just a Subaru. It's speed limited based off of aero performance because it makes 86 horsepower of the ground. So it only does 140 kilometers an hour. She's not quick. You have to think whenever you pull out in traffic, like is there really enough speed? I got no power to pull anything. It moves the kids around. They like it. They can see it. It's got a sunroof. It's just a family wagon now. MitsuTimes: everything you need is to expand the family. Mitch Chubey: Exactly, you put things in the back and and I and if the kids want to throw an applesauce or throw toss a milk around and it spills I'm like whatever I don't care about this one like it's this is what it's for MitsuTimes: Out of all four cars, which one gives you the most headaches? Mitch Chubey: The most headaches right now it's the wife's but I just did a round of mods on it and I can't seem to get it to idle. I think it's the 0.2 cent that's gone because I built a new downpipe for it but mine's given me some headaches but nothing too serious for the most part. Like I've had a couple wastegates actuators snap on me and it's only ever when I'm at a track that's a long ways away but thankfully I've been carrying a spare lately but usually it's something of my own doing. MitsuTimes: Thank Mitch Chubey: whether I rebuilt like the wiring harness for the engine bay in the rally art. And in the technical documents for the wiring pin out, there's two blue wires that go to the math sensor. One's gray on blue and the other one's blue on gray. And I got them mixed up so the car wouldn't run. But after some troubleshooting and rechecking wires and what pin goes to where, it was like, okay, just two wires to switch around. So not the end of world. But that was probably the biggest headache. The other... The only time I've ever missed an event working on it is Mitsubishi connector for the air conditioner and the starter relay. And I mixed those up because I had to turn the car off. And when I was putting it back together, it wouldn't start. And I couldn't get the starter to click. And I ended up missing the event. And sure enough, the next day, I'm like, oh, these things are the same. I switch around and they fired up like nothing had happened. Other than that, it's been really reliable. MitsuTimes: with. Mm. for it. I guess it's good to know that they're still doing that because on the ⁓ 2G DSM, the air conditioner plug and the starter or the coil pack plug are the same shape and size and almost in the same location. So they're easy to mix up. Mitch Chubey: There is a big problem. No, definitely. On the CYs and the CT chassis, the two plugs are really close to each other too, right? And the air conditioning is removed from my car, so it's CT's overlook. But now that's all been stripped out, nothing to go wrong there. There's just one connector now. MitsuTimes: Well, Mitch, I'm a big fan of the rally up, but it gets overlooked a lot. What made you want to get your hands on one and eventually race one? Mitch Chubey: Well, it happened more by chance because it was like, okay, they have the same motor and you look at it and you start digging into it. You're like, ⁓ the chassis is kind of the same. And you start getting more into it. You're like, the front end is a hundred percent the same. And then you start really digging into it. there's nothing on that car that isn't from an Evo at some point. Like the rear diff's out of the nine. It's the same diff. The rear suspension geometry is Evo three. So you start digging through it. They just kind of. put it as a parts bin and like we got spare this and that and it just kind of came out I guess. But it's got the same front end and all that. Like if you look at my car, if you go from the middle of the rear doors forwards, there's nothing on it that wasn't, isn't an Evo. And then on the back, or like an Evo 10, and then from the back it's still Evo nine and three. it's just kind of a hodgepodge. I'm not saying like there's an advantage or a disadvantage to the rear suspension on Evo, but the Evo three. kicked ass when it was around. it's not a bad platform to start from. And on the plus side, with all the pickup points in the rear being a little bit different, I can run a CY chassis. So if I bend it into a wall, I can pick up a base lamp, so for 50, a higher box with a blown motor or a trans or anything and swap it all over. I'm not looking for a thousand dollar Evo chassis or a whole nother car, right? So that's one big advantage on that point where like the chassis are plentiful. It's not hard to find one. Not that I'm planning on fitting it into a wallet anytime. That's a, I'm gonna try and avoid that for a while. MitsuTimes: not in the plans. Mitch Chubey: No, it's definitely not a planned operation. MitsuTimes: Well, are people surprised, Mitch, when you talk to them about taking this Rally Art to the track and you say, ⁓ it's not an Evo, it's actually a Rally Art? Mitch Chubey: Every single person thinks it's a Evo from when they first look at it. go, well, no, it's got a round gas cap. It's actually just a base model chassis that's got a bunch of nice stuff that the factory shipped it with. So I can't really complain on Mitch's from there because they shipped the motor. It's the same from valve cover to the pan. They just changed the turbo. Single scroll, the dual scroll, and it came with a smaller one. Otherwise, it's you had two sitting side by side, you're not gonna tell the difference. And then a lot of the evil parts and stuff transfers over and strangely, some things like the exhaust don't transfer over because the chassis are somehow a little bit different. Like I have an evil exhaust system on it right now. The Tomi tie exhaust was on the wife's originally. it, the retail pipe sticks out to pass the bumper, but on the Rally Art for some reason, it sits in like two, not really sure where the length differences. It might be in the bumper or whatnot, but. There seems to be a little bit of a difference in the back there, but otherwise, yeah, it's just the same car. just sold it, sold the same number of units and then I guess their plan was to make it like a more fun daily driven car. They shipped it without the S-Sport and a few other little things and detuned in power. But if you look at the base of them, the platform from the base is almost the same. MitsuTimes: So they're pretty much aesthetically the same, but how do they feel behind the wheel? Mitch Chubey: They are a little bit different. Like the wife's on track is easier to drive. I will say that they the AYC does make make a bit of a difference. A lot of big track guys on their Evo X do end up swapping it out for a mechanical rear diff. The AYC definitely has a little bit more of a I want to say a tame but you can feel it working. You can turn it off but I don't think it's fully fully off on all scenarios. I think there's a little bit behind it and Her car will, I can feel it wanting to rotate a little bit more. My car, has a, sometimes it wants to push the front end, which is inherent with the chassis, with the engine being at so far front. It's hard to move. It's really easy to pull weight out of the rear of the car. When you're trying with the track build, pulling weight out of the front's been a big, a lot more of a challenge. Hand in hand, they handled the same. Now from factory, the Rally Art comes with a much slower rack. That was the first thing I noticed when I drove it. I remember driving down the street after I picked it up and drove it off from the guy's place and I turned the corner and I like, didn't, I meant to go into the first lane on the right and it went like a lane and a half. I was like, oh my God, this thing doesn't turn because you got to like hand over hand the Evo. You're just two hands on the wheel and you drive it around. I was like, oh, that's the first thing. So that was the first thing I changed out when I got it. and then it starts snowballing and you're like, ⁓ the power steering pumps aren't the same. It gets a hard spot because you're moving more fluid and the pump's not big enough. So then let's solve that. MitsuTimes: Well, Mitch, would you say that there are situations where the Rally Art actually outshines the Evo 10? Mitch Chubey: If I had to pick one, like not saying from like what I have built, I would probably pick the Rally Art again. From the beginning, because unless you're going to trail your Evo and all that, the Rally Art seats fold down. You have all that trunk space. You have all that. You can bring an extra set of wheels. No problem. You can bring a tent. You can bring a table, chairs, tools. It's a little bit more versatile that way. But when you come to break it down to a cost perspective, The Rally Arts probably got the same amount of money as it cost us to buy the Evo originally. So it's hard to beat from a price to performance standpoint on that. with a lot of Evo guys taking stuff off, if you want to Evo performance into it, you can pick up a turbo and a panel from 400 bucks. It's pretty hard to beat that way. And then you got a 350 horsepower car. And that's originally how the car was when I got it. It had a MitsuTimes: Mm-hmm. Mitch Chubey: Evo X turbo on it in a manifold and that cracked and I put chipped out and went with the eBay special tubular and ran that for a year or two and somehow that held up and then just started snowball from there moved into a EFR 7163 and now that's on the wife's car and trickling down that way. MitsuTimes: Okay. So it sounds like you would recommend the Rally Art if somebody just wanted like a budget track car. Mitch Chubey: definitely. It does have its downfalls. It isn't a light chassis to begin with. Somehow it's 200 pounds lighter than an MR, 100 pounds lighter than a GSR. There's a 100 pounds difference between the 5-speed and the SST. But I'm not sure where the rest of the weight comes from, where they've saved it. Because if you pull the chassis apart and get down into the depth, there's not a lot of different braces and pieces in it. So I'm not sure where the extra weight comes where they've hidden it. might be in the sound deadening or whatnot. I haven't pulled that out of the wife's car, so there might have to be bit more in there, but overall, yeah, you can start out there and it's easy to pull two, 300 pounds out of it without trying too hard. So then you're down to 3,100 pounds and all of a sudden you've got a car that you put on some wheels and tires and some decent brakes and it's not eating consumables. MitsuTimes: See Yeah. Mitch Chubey: Cause that's one thing that I will say that my car seems to be pretty reasonable on the consumer rules. Like I've had in five years, I've gone through one set of front rotors, which I bought used and they resurfaced and they had been used on another big time attack Evo from Southern California. So they had some miles on them. I still have the original rotors on it from that purchase from five years ago. I've changed brake pads in the front once. But even then they weren't worn out. just changed compounds. and then tires, I seem to age them out by heat cycles faster than I do to the cords. MitsuTimes: And Mitch, we talked about a misconception right away about the SST being made of glass. Are there any other misconceptions about the Rally Art platform that a lot of people have? Mitch Chubey: I think the biggest thing is they think it is just a base. It's a base Lancer, which it is the chassis is I'm not going to sugarcoat it. It came with some nice things from factory. It's got forged pieces or a rear trailing arms. The base models got a stamped piece and there's some other little things that they've changed. It's got the diff. The diff came the same diff as 89. They came stacked in the U S and Canada the same way they stacked them. before where you have to restack the plates because it's set up for grandma so doesn't chatter. otherwise, yeah, I think people definitely overlook it when it comes to it. I think a lot of it is just the whole evo-cloud of just having the name behind it. But if you took the badge off and you cover up the gas tank cover, you can't tell them apart really. They're pretty, they're almost same, same, but different. MitsuTimes: You Well, walk us through the primary Evo 10 Mitch. What's going on with the build? Mitch Chubey: Right now it's sitting outside the shocks. The wife's MR is coming off the lift. So I just recently finished swapping some things over that and doing some much needed maintenance and a few things. And I probably went a little overboard. I took the subframes out and sandblasted them and steric coated them. And now she's all pretty and everything, but her car, she got my old turbo. Her manifold was cracked like they all crack. So. I originally had an image performance one to put in and it took me, I don't know, two weeks to get one stud out. It was stuck in the turbo and I started getting more. Like I remember just sitting there like, oh geez, what am going to do? Having a beer. I was like, okay. I'm like, you know what? I got a full race manifold sitting on the shelf with a 76, 70. I'm like, I'll stuff that in my car and then I will take mine out and put it in hers. I was like, oh, that sounds great. All right, one more try on the stud. Sure enough, the stud comes out. It must have heard me think. And then I got the manifold everything back in with the map and I was like, all right, I guess we're just going to leave it as it is. And sure enough, one of the bolts on the other stud that you leave for the manifold, it ripped the threads off tightening it up. was like, oh, that's it. Manifolds on going back on marketplace and I swapped the turbo over and all that. And then I built a new downpipe for it, three and a half inch. Yeah, she got a set of Owlens. Yeah, a couple of bushings and few other little things. Now it's ready to come off the lift and start tuning. And then for mine, it'll go in. Transmission needs to come out, rebuild. I keep debating whether or not to put a set of rods and pistons and do the block, but I have other plans future down the road for it. So it's like, maybe I'll try and hold off on just keeping it stock block for the time being. So we'll go from there. MitsuTimes: And then what about the most serious Rally-R build? Why don't you tell us a little bit about what's going on under the hood there? Mitch Chubey: So as it was of last year for the clutch Lego, it was a stock block with ARP rod bolts and S2 cams. Otherwise, there's nothing done internally to it. It's got an oversized ⁓ intake manifold. So it's been ported by hand. And it's got a 65 millimeter throttle body out of the V6 Eclipse. Then your standard bolt wants to go with that. intercooler pipes. It was running ETS four inch intercooler. And then for a turbo, was on an EFR 7163 with the SXE compressor housing. I made a custom intake and it's got a three and a half inch custom downpipe in it. And it made about three or sorry, five 15 ton wheels, about 155 pounds of torque. but the torque would come from 3500 to almost redline and it would start to fade up top. Just the back pressure, little upside down at 8500 RPM, about 43 pounds of manifold pressure making 24 pounds of boost, almost two to one. So she was working pretty hard. So that's part of the reason we went up a turbo size, bigger exhaust housing. So doing the math on EFR's matchbox. It shouldn't be quite so upside down, about 1.3 to 1 rather than 2 to 1. So it should be a little bit more efficient up top. But the spool and everything shouldn't, I shouldn't lose too much going to the bigger turbo sizing. otherwise it's been, I don't want to say it's gutted because in max one you still need to, which is the SCCA rules for time attack that it runs under now. Or sorry, it runs max. Max 3 actually. It's a Max 3 car based off engine displacement. But under the max rules, you have to keep an interior unless you fully cage the car. as much as I would like to have a cage for the safety aspect, the car is not light enough yet for me to move down a tubing size. So once I've reached that, then I will put the cage into it. it's, so the mission's actually just been to take weight out of it. Every winter it's like, all right, I want to say, last year was I want to take 100 pounds out of it. And I kind of cheated a little bit on that, but the year before it was, okay, let's find another 100 pounds, another 100 pounds. So this year it's starting to get a little bare bones on things that I can find. if I can find 50 pounds out of it, I'd be happy with that, with the added power from the bigger turbo. But reading through old forum, some things, was actually Chet Rickerman's Evo X build that really got me into the whole weight reduction thing. And like he said, it's Once you start, can't really stop because you start to realize the gains and performance and you start to feel it and you're like, ⁓ okay. So the car now at race weights sub 3000 pounds with me in it. So on the scales, I think it's just a hair under 2,800 pounds. So it's starting to get, starting to get down there. So there's still a little bit more to go, but right now it's running. It had a weird 12 plate, weird diff kit in it. I have a Cusco. 1.5 way that I'm gonna put in Just just to try and help with the mid corner Understeer just have the back end still transferring a little bit more weight forwards try and get it to bite ⁓ It's on a stock ECU with Tefer ROM. It's got a the evo scan TCU ⁓ Modifications to it. I don't run excessive after pressure or pressure modifier. I think I'm at like seven or eight percent Pretty reasonable on that. Biggest thing is just tuning on it. With the SST, it's clamp load, largely based off of the engine's load value that it's giving. So more you can skew your math and map calibrations a little bit to read a higher load and tune in those columns. So if you say you're doing 290 load, the ECU will go, OK, you're making more boost and more of that. and the transmission will actually apply more pressure based on its mapping over you just cramming more after pressure into it. Because the after pressure is a global pressure adder, so that adds pressure to the shift forks and the valve bodies and the check valves and everything. So ideally you don't want to have it put too much in there because you can wear things that way. Cramming things into gear a lot harder than it's probably was meant to. That way it's just applying pressure to the clutch packs. But I've done a lot of work on changing things from steel to aluminum. There's been potted pieces of the chassis that's been removed to save weight. It's been stripped down, but it's still street legal. It still carries the kid. I can put the kid's seats back in if I want to. They love it. And yeah, it's still a four-door family sedan. MitsuTimes: Yeah. Mitch Chubey: in some regards. Doesn't look like it from the outside, it's more of a GT3 look going on it with the wide body and everything. MitsuTimes: pretty sick pulling up to kids up. Mitch Chubey: ⁓ they love it, especially my little one, Tom. He gets excited when he hears it. He knows daddy's here. Now he runs around and tells everybody that daddy has Evo. Daddy has Evo. He's two now. So his favorite toy is this little blue Evo I bought at Canadian Tire. It was supposed to be for my daughter years ago, but she was like, cars. But he got ahold of it and he's like, my car, my car, my race car. He's definitely probably going to follow in daddy steps as much as mom probably doesn't want him to. MitsuTimes: Yeah. Well, what do you say, Mitch, has been the modification that has made the biggest difference on track? I know we talked a lot about weight reduction. Would you say it was that or maybe something else? Mitch Chubey: In terms of handling, I'd have to say it was the center diff controller. That was back to back from one track day and then 10 days back, same condition, same tires. was one and a half seconds on a 72 second track. So that was probably the night and day. And then the other big one, like any other car, will always take is more power. So from one day to the next, going from pump fuel to E85 was probably worth another second and a half or so. And then tires, of course. If you got the best tires, whatever you're allowed to run, you're always going to find grip in time. MitsuTimes: Thank you. What would you say is an that kind of gave you not as good of improvement as you were hoping for, for as much as you paid for it? Mitch Chubey: hard to say because a lot of my parts that I buy for the car are actually used parts. ⁓ The least value? I know what I did. I went on a big route two years ago on a big mission to rebuild the fuel system. I wanted to get rid of the catch cam was my goal and have it inside the tank or figure out a system to do so. Cause the cat, I had it, had a radium catch can at the time. And it's a big beefy, the whole thing weighs. I was like, well, if I can cut that, that's four pounds. So I went and machined a new billet ⁓ tank cover and stuck this filter inside there. And it's guys, a five 35 Walbro pump. And it's like, okay, we'll use a big Holly hydro mat. Cause all the They showed you all these things online where only a little corner touches fuel. It'll still pick it up and all that. I'll still be able to run like a quarter tank for, for a session, go out there and all that. Yep. First day out. It's fuel starting again, right from the get go. It was actually, that point where it was so bad that I had to fill the tank to the brim. I'd get three laps and it would be like still five eight or seven eighths of a tank. would still feel sort of, it was insane. I was like, I don't understand what's going on here. So. back went in a surge tank to fix that so back to the tube pump system but it is what it is I was originally just gonna stuff the radium system back in but I had already put it back and put it in the wife's car as I had me down so I had to come up with something different so now it's got a two and a half liter surge tank with a single pump and all those problems went away so like when I said I kind of cheated last year with the 100 pounds weight reduction. 76 of it was in fuel. I didn't have to run the car. I can run it with 10, 15 liters in the tank and not have any issues. MitsuTimes: Have you found kind of an unexpected weak point in either one of these platforms? Mitch Chubey: The biggest weak point is the understeer mid-corner. They turn in gray. Once you're on the power, the exit is phenomenal with the all-wheel drive. It's just the front end pushing. Mid-corner is probably the hardest part to try and dial out of it. And there's lots of ways to go about trying to correct it, but it's hard to get it to still do it with the whole way the chassis is with the... engine being over the front axle so far. It's just the sheer amount of weight, especially in the low speed corners. It's probably the hardest part to get that rotation. I know a lot of guys run really, really stiff rear springs, but then you're giving up overall traction elsewhere. And then there's roll center correction. You can only go so far. Like I could probably lower the front of the car an inch and a half to make it to change the rake. MitsuTimes: Mm-hmm. Mitch Chubey: The front end on my car is actually probably higher than what the rear is. But trying to work with the way that Mitsubishi did the McPherson strut, trying to keep the roll center high enough to the center of gravity so you're not getting an acceptable roll because a lot of guys slam the car. I know my buddy Danny, he's on SBC Knuckles and he's got his car. It's probably about, I think we worked out it's about an inch or an inch and a quarter lower than my car is. East fighting role and it's like you can only go so stiff on the front sway bars and so it's always a give and take vehicle dynamics get really complicated really fast because a little change can snowball into other things and you can start to find yourself chasing your tail. The weird thing that I've noticed with my car is that my local track turn two is this long almost double apex corner where you come in hard brake and then you're kind of there's you're in this kind of coast zone while you're waiting for the the front end to like hook up and continue the turn. And I don't know what made me think about it. like, well, maybe if I power or get on the power a little bit earlier and let the diff controller do its work and kind of a weird way to drive, cause you don't drive like a rear wheel drive car or like in the Sim or anything like that, the same way. Like you need to be on partial throttle to get the car to rotate. MitsuTimes: Mm-hmm. Mitch Chubey: And then once it's starting to rotate, you can get on it. And once you figure it out, you can find some serious lap time once you get it in. But it's not intuitive to drive it that way. It doesn't seem right. Any other car and you're like, this will bite me. Like I know a couple of guys with the GR Supras, they're like, you are on the gas so early. Like how? I'm like, well, it's part of it's the all wheel drive. And the other part is I'm wanting the rear end to come around to reduce its traction to get it to go. But once you've MitsuTimes: Thank you. Mitch Chubey: nail it you feel like you're just the king once you get it set up and rotating. But it's not the easiest thing to do, lap in, lap out. But we'll see time that comes. MitsuTimes: one of those things. ⁓ Mitch Chubey: Yeah, just one of those things, but that's probably the biggest downfall with the chat. overall chassis is trying to dial out some of that understeer. Like the wife's car, I think it's 65, 35 weight distribution and mine's closer to this. think it's 58, 42 now. Which it's helping. So it's, it's getting there. It's just a matter of getting that last little bit. And then it's, it's hard to, to back to back testing days. between cost and time. So a lot of times I just have a notebook that I've written down things of what I've changed and how it felt and then I'll change something at the shop over the next week or two and go back. But it's not always apples to apples. So sometimes you're kind of chasing your tail. You're chasing track conditions. You're chasing tires and not being like I can't afford a new set of stickers every time I go out. So usually run the tires till they're dead. and then find the next greatest one from there. MitsuTimes: Well, Mitch, earlier you talked about SCCA and the class you race in. that the same? Do you race some of the other cars in different classes? I know you talked about maybe doing rally with the other one. Mitch Chubey: No, I raced them all in the same class just based on, cause like the wife's car would under SCCA rules would fit under tuner. I think it would, no, it's got the turbo now. So it would be a max car cause it's been changed. So they all would fall underneath the max class cause they're not the stock turbo, but the max, there is a class above unlimited, but that's a whole nother can of worms and a whole nother like you can. If you can think of what you want to do, it's probably allowed. So with this, there's kind of like a cost limit. The plan is to actually go to global time attacks at the Ridge this year. I've been wanting to go there for two years. It just, I haven't been able to make it happen between the family and things. And the one year I was thinking about going, I was like, I probably won't be competitive. And a buddy of mine's, Ryan, he's Taking a super down there getting potions. I'm like, well, I can't be that far off if that's the case but the only issue is the the rule sets don't quite a hundred percent match up there's a few things you're allowed to do in max class that you're not allowed to do in the street class I'd be limited to a 265 tire which would Probably wouldn't transfer over just changing tires. I'd have to do some tests or to try and maximize the tire. Right tires the only thing that you really contact the ground to. So it's all about optimizing that tire patch. So it would take some testing, but it's definitely a thing. It ran 265 tires before, before I finished off the wide body and got the big wheels and everything, big wide wheels. I do have some notes on how to probably set it up. just a matter of finding the time and doing it. MitsuTimes: And then we talked about this really on Mitch, but you you said that being an athlete is kind of what drew you to motorsports. What is it that drew you to time attack style racing over maybe other forms of motorsports? Mitch Chubey: Thank you. Like I think the ultimate is still wheel to wheel. Like, let's be honest, there's nothing better than going door to door with another guy going into a corner who can break radar and pushing yourself that way. But that involves another person that you need to trust. Right. So then being trying to be more cost effective qualifying is a big part of racing and time attack is just qualifying. If you see it in its basics form, it's one lap. That's all that matters. I think that that was the biggest push was the fact that I could be out on track, still competitive and you're still racing people, just not in the same sense of being door to door with them. MitsuTimes: you Kind like going back to that grand tourism, it's kind like the ghost car. Mitch Chubey: Yeah, exactly. The ghost car is never going to take you out. You're about whether or not he's going to turn in or if he sees you. with like everything with the fourth year ago, guess, if it'll be if it ever comes to tuition, it'd probably become a endurance car. So that'll be plenty of door to door action. And it's already hit a ditch. So I'm not going to be really too upset if someone bumps into me when we're going at it. MitsuTimes: Okay. Right. Well, Mitch, what's your overall approach to improving laptop? We hear on here a lot about, you know, either looking at data or, you know, just kind of filling from the seat of your pants of what changes need to be made. Where do you kind of lean towards? Mitch Chubey: Definitely it has to be towards the data on my point. Because sometimes it doesn't feel like I'm pushing at all and I go faster. What is going on? And it's the same thing in the sim. Like if I'm pushing for a lap time in the sim, you're making little mistakes here and there. It's never perfect, right? Like sometimes it's to take that 1 % the board, nail everything. And it's hard to do that when you're trying to go for a time or trying to beat a personal best is the biggest thing. think the data really shows where you're improving and how much. Sometimes you won't see it or feel it from left to left. You won't realize, okay, if I use third gear here, I'm not getting as much engine braking and I'm carrying more minimum corner speed entry into it or vice versa. Or I use second gear, I do get the rotation out of the car. And then you're carrying that speed down the straight and it's all about really finding your breaking points, which comes with practice and understanding and how far you can push the car into the corner and still get it to rotate out. Because even though if you Sometimes you're faster, actually 90 % of the time, your lap's gonna be faster if you're more conservative going into the corner and maximizing the exit onto the straight. Every mile an hour you carry the corner is 1.5 feet further down the straight every second for the length of that straight. So you've got eight seconds straight, you're 11 and a half feet ahead of where you would be if you carried one mile an hour. So if you can get a four mile an hour difference, you're three car lengths ahead by the next straight. I think a lot of people try to really push the braking zones and it causes them to create mistakes into the corner or not quite nailed the line or the acceleration point. And it costs them down the straight. I think people get caught up in the data sometimes too far. They're looking at little, small of a piece of the track. I know a lot of the data loggers, they break it down into like, little tiny subsections like I Solo Storm is the big one that we use up here, local company that developed it, but it breaks the track down into like our local track, it's only nine corners, but it breaks it down into, I think it's 23 sections. So people get up, like, oh, I'm two tenths faster in the braking because I nailed, I like braked later. Okay, cool. But you were like five sec or almost half a second slower down the next straight because your minimum quarter speed dropped so much, right? You missed the exit. MitsuTimes: Thank Mitch Chubey: Now, if you go slow, don't focus so hard on the braking and really get the apex and the exit, that's where you're going to maximize your time. For me, some of my fast laps, they like, I don't feel like I'm pushing because I find if I really push the car, I am making mistakes. there's other times where I've been able to really push and it feels like I'm on the verge of out of control almost. And it's been quick, but it comes down to driver style. But I've had both instances where I'm like not pushing and it's quick and then where I'm really trying and it's been quick. So it's been, and I'm sure if I really overlay the two laps back to back, some will be faster in some areas and some won't be in others. And it's really just trying to figure out those two meeting points to actually get the ultimate lap time out of the car. MitsuTimes: And we talked about it a little bit earlier, Mitch. When you're looking at data, are you using like those draggy lap timers or are you looking at you feedback? What all are you doing to improve your laps? Mitch Chubey: So now the car has gotten to the point where it's almost, I want to say, to like a GT3 level. For like information, I got suspension geometry and travel, tire temperature sensors, brake sensors, or brake temp sensors, and then all the engine data, G-force, all that. And that's all wired into the car now through a RaceLogic box. But before, I was using just your standard GPS. and it was literally taped to the dash to log just the basics and I think just the basics for a lot of people is enough. Just something to go by where your breaking points are, how much lateral force you're making, your middle and corner speeds, and just overall lap time and sector. MitsuTimes: thing that I like to ask the circuit guys How much of time attack is driving versus the setup of the car? Where's the ratio that gives you the best lap times? Mitch Chubey: It's probably 80 to 180 % driver. Like there is no substitute for seat time. I know listening to the podcast, everybody says the same thing. It all comes down to seat time. Like none of us are Max Verstappen or Lewis Hamilton. If we were, we'd be an F1. So there's always time left on the table and it's your fault. And like, where are you, where you going to push it? Like how big are your balls? How far are you willing to go? How are you willing to take that corner at 160 miles an hour and not lift? That's usually like the biggest lap time. You can find little bits here and there, but once you get to the car to a certain point, there's only so much power you can put down to the ground. There's only so much power you can push for so long. A lot of it comes down to heat management. there's almost like a ceiling there. There's always more lap time to be found from the driver. And little things can add up. You find a half a tenth in every corner for 10 corners. Right. That's two and a half or that's a quarter second. So in, in time attack, can be the difference between first and eighth, depending on the. Challenge wise, either the Ridge in Sheldon, Washington or Area 27 in the Okanagan of Baltimore. They're both big circuits, faster speeds, and frankly I haven't been to them as much as I'd like just to get the experience and just the track time. Like my local track mission, it's 2.3 kilometers, like a mile and a half kind of thing. It's small, it's tight, but... I know the thing like the back of my hand, right? So it's just a matter of getting time on the circuit. There's another local track that's on the island, which is kind of a pain to get to. You got to take a ferry and it's a bit of a mission to get over there, but it's similar to mission, but longer and it's tight and winding. And like my car really does perform there because with the law of low speed corners and the all wheel drive, you can really use the power early. the. It's just, yeah, those would be the two tracks that have challenged me the most so far. MitsuTimes: from your personal perspective, what changes when you jump from an Evo to a Rally Art or vice versa? Mitch Chubey: Not a whole bunch to be honest. I think the biggest thing for me to change is in the wife's car, I right foot brake and then in my car I dual pedal. I broke my leg riding my bikes in 2012 and after a day of tracking my knee hurt because they didn't put my leg back together straight. So my solution was to put a second brake pedal in the car. It's offset from the other one. There's space work, there's no clutch. MitsuTimes: Okay. Mitch Chubey: It's offset so both pedals throttle and brake are equal so it's more of a formula setup. That's probably the biggest change between going between the two. MitsuTimes: And then would you say that your driving style changes between the two or is that pretty much the same because the platforms are so similar? Mitch Chubey: No, the only thing I would say changes between the two is my risk of and caution of crashing. I put mine in the wall, the wife's going to be upset. I put hers in the wall, she's really going to be upset. MitsuTimes: Yeah, no. Wouldn't want to come home to that. ⁓ Mitch Chubey: Well, she'd have to come and pick me up because I probably would have driven there in it. Then I'm really scared all the way home. MitsuTimes: No, kid. Send them back. Mitch Chubey: Yeah, least the kids will be nice to me. MitsuTimes: Mitch, would you say that one car is more forgiving than the other when it comes to racing? Mitch Chubey: ⁓ yeah, the Evo, I would say it's, it's not as far down the race car path as mine. So it's definitely a little more forgiving. It's a little softer in suspension. It's not as... MitsuTimes: Mm. Mitch Chubey: quite track alignment focused. It still has to do some daily duties once in a while. So it's definitely a little bit more forgiving. And with mine, I've been trying to the rear brake bias back more and more with pad compounds and rotor going up on rotor sizes in the back to try and help with the trail braking and rotation. with hers, it's definitely a lot more stable under braking. it's easier to drive near its limit than it is mine at its limit. MitsuTimes: Well, Mitch, would you say that one car over the other feels more rewarding when you really hit ⁓ a perfect lap? Mitch Chubey: Yeah, I definitely say nailing a lap in the Rally Arts feels better than nailing a lap in the Evo. It's multiple seconds faster. And it's more on the limit. It feels more on the limit. The car is set up to go. The other one goes. It's not the same. I don't know what it is about my car, but there is something like when you do finally nail that lap. I remember last year, finally kind of got it all together. Got it on its 315s in the... 18 by 12 wheels. And it was the first event of this season. Usually a couple of Supras go out first because we line up, we try to line it up fastest, the slowest for your run group. So that way everybody kind of gets fit in their hot laps without running into traffic, trying to keep the amount of passing down. And I remember lining up and just kind of following them around. And I was like, ⁓ OK, this is working out well. And then so then I've... Set a personal best. It wasn't by a whole ton. I've been out earlier the year on a 295 Hoosier A7, but on pump gas. And then once I got there, I was on the E85 with the fresh 200 treadwares. so the next session I went out first, they're like, you can go first. You were like just chasing us around the whole time. And then I dropped more seconds off of it. I remember my goal always was to get a sub 110. admission, that was the goal. And I came in and it was a 108.7. I was like, Oh, I don't know where that came from. But that was, it was really unexpected. And then we're looking through the log books there and it made it the fastest 200 trailer lap lap record at the time. Okay. That's pretty cool. Like at the moment, it didn't really hit me. It wasn't until I was like halfway home, driving back, actually, I might've been on the way to work after. I was like, Oh, Like I didn't really realize what I built and created and done. I was like, it's the fastest 200 tread wear tire car around that track. I was like, that doesn't really make sense to me. Cause like it's a four door family car, like we got Porsches and GT2 not RS's and all this coming out. was like, that's kind of insane. Maybe I really should put a case in this thing. MitsuTimes: might be time. Mitch Chubey: It's coming. I don't think it'll happen this year. It'll probably be next winter. I gotta take the roof off of it anyway. It's been dented in by some ice falling off the house one winter when it's on the outside. MitsuTimes: Well, Mitch, I feel like I already know what car you're going to say, because, you know, when you talk about it, it sounds like it's more of the race car. Is there one car where you instantly get in the zone when you strap in behind the driver behind the steering wheel? Mitch Chubey: probably not the car you think it is. It's maybe the wife's Evo. MitsuTimes: Yeah. ⁓ wow, okay. Mitch Chubey: In my car, it's a little bit too far down the race car path to be like to drive it around. Like I drive it around and I'll take it to work sometimes, but I'm not taking it downtown or anything like that. It's a big wing splitter. It's a little bit. It's a little bit on the outside, but no, it definitely the the the Evo I'd say when you hop in that and it's really weird when I'm in the Evo guys will try and race you on the street. MitsuTimes: Mm-hmm. Mitch Chubey: I don't know what it is. It's just maybe it's the badge on the back and they'll try and race it all the time. But when I'm in my car, nobody wants to race it. Like they'll pull the badge and you're like, they'll look at you and you'll just see them kind of fall behind. You're like, okay, like I'm not expecting that because you would think, ⁓ guys are driving a race car. I'm going to race that in my AMG, whatever I'm driving, but no, they don't want anything to do with it. It's kind of weird. MitsuTimes: ⁓ wow. Let's move. Mitch Chubey: What the smoke? They would probably get it Well, I'm not going to say it's fast in a straight line. It's got a lot of aero on it and it's not pushing huge, huge power by any stretch. It's light for what it is, but it's not as... It wasn't built for straight line racing, that's for sure. MitsuTimes: Thank Mitch Chubey: Now we add a corner to the equation, then we're on to another game. MitsuTimes: Mitch, what's been the like the one most ridiculous part that has failed that you were just kind of like, ⁓ really? Come on. Mitch Chubey: the turbo wastegate actuator. But I do have to give a shout out to Turbosmart USA on this one. I bought the EFR 7163. came with an aftermarket Turbosmart wastegate on it. Ran that and the originally the little tiny bronze bushing on the base was worn. And I reached out, was like, hey, can I buy this part? Like I would like to replace it because I'm putting the car together. And I would like to freshen it up because I'm putting it back together. And I can't remember his name. It'll come to me probably. think his name is Josh too. But he was like, yep, no problem. I'll just send you one. I was like, ⁓ OK. I didn't buy the part two. I'm second owner. They just sent me the piece. That's cool. Then the next year, was down at Sheldon at the ridge. And the wastegate actuator broke in the first. It snapped the rod right at the end of the threads. So missed a couple of sessions, but local shop down the street tack welded it back together and it held enough for the event. But I reached out and was like, Hey, can I get a replacement rod? Can I buy one? And they were like, no, we're just going to send you a waste gate. Okay, cool. Like I don't, I'm not expecting this at all, but thank you. Broke. I ended up breaking another one this last summer at area 27. And the thing I messaged him and said, Hey, I broke another piece. Can I just buy the broad? They're like, MitsuTimes: No kidding. Mitch Chubey: No, and they just sent me like six of them. They're like, here you go. Like you're obviously doing pushing it. Here's a couple of spare rods. So now I have the two waste gates that I can take back and forth, but I'm, I'm moving on. I have to say from there, I've moved on to an electric actuator. So that'll be going in when I rebuild the rest of it. Electric waste gate actuator. So Mitsubishi makes a bunch and a full race kit. I'll be transferring over to more control for that way. Just because the back pressure up top, even if you're running 100 % wastegate duty cycle, you can't push it any farther. Like on the 7163, it would start to fade. I'd be asking for 28 pounds and it would fade to 24 and a half, 25 pounds after about 7,000 RPM. It just wouldn't be able to hold the back pressure. It would overcome the spring. And then with the electric wastegate actuator, I should be able to hold it shut. If I want that amount of wastegate, will hold it at that amount of gate. And with the turbo speed gauge, I still have 25, 30,000 RPM of turbo speed available within the limits of it. that was that purchase decision there. But now moving to the 7670, still going to put it in. MitsuTimes: Mitch you talked about where it's going to start on your car and then trickle their way down Have you ever had to steal parts off one car to put them on another to make it to an event? Mitch Chubey: Yes, I have stolen my wife's wheels and tires before. Yeah. And then I've also had to steal a boost coupler once. They were both at the time they were on stock turbos, Evo X turbos, and I melted one when I went to the tubular manifold. I was in the midst of tuning it before an event. yeah, it just wasn't going to show up in time. So I stole hers. MitsuTimes: you Mitch Chubey: Off we went and then actually I ran her tires for almost a whole season. And it sat her car was on the winter tires that we have for it for a while. And then she got them back later on, but that's when I was running to 65. So it was actually pilot sport mission for us. I think that's a tire that gets slept on a lot. It may not be the most track tire, but on a, for a daily Evo, like you can't, can not go wrong with that. with that tire as long as you're not driving in snow. In the wet, phenomenal, does track duty. On the streets, can only imagine. Yeah, on the streets, probably the, it's probably hands down my favorite tire to drive on the street. It's quiet, it's comfortable, it grips, it goes, and it lasts. It's got a 50,000 kilometer tread warranty. Like what other tire in that performance class has something like that. MitsuTimes: Well, it kind of on the same subject, Mitch, have you ever what's been like the most last minute repair that you've had to make before an event? Mitch Chubey: ⁓ there's been plenty. I think the biggest one was actually the boost actuator. Rods came in, I put it in and I meant to go out, like I put it in the day before the event and I meant to go out. Life got in the way. I just drove it to the track and on the way to the track, it's you step on it and the thing would, the gauges would read like 40 and go past whatever they read. It's like, I can like, this isn't right. This can't, I can't be building 40 pounds of boost. MitsuTimes: Okay. Mitch Chubey: I'm gonna be seeing some windows. So I remember like with the track, like taking out the preload as far as it would go and it would still do it and then dumping the waste gate duty cycle to zero and it would still, it would kind of spool to like 28. I was like, okay, I've tuned in that area. Like it'll be fine. It's a little more than I like, I like peak boost, peak torque. Cause I was already nearing the limit of what the trans would hold. MitsuTimes: You Mitch Chubey: And so I went to the track and ran it, ran a personal best. But if you're looking through the data, you can see where like the coming onto throttle where the extra torque is pulling the acceleration. Like you can see the acceleration difference. So that's probably where a lot of the time came from. And sure enough, last session, last everything just, yep. Nope. don't have ⁓ even gears or odd gears. Sorry. Yeah, the C1 clutch pack. ⁓ let go. Not enough to cripple the car. I still drove it to work, which was an hour and half away, and drove it home the next morning. She didn't like it, but she made it home. It's never left me stranded somewhere. MitsuTimes: That's good. Mitch Chubey: The only other big one I've had is the return line on the power steering. So there's two little lines up on the rack from the outsides to transfer fluid from the other side of the pistons. And the longer of the two developed a small crack underneath the fitting and it was dumping out power steering fluid. And I remember taking it apart and finding, and it's just the smallest little hairline crack. I still have a little end fitting for it, but it's got a special bend to it. Self-sealing, it's a B-tube bend. And of course there, no one has the... MitsuTimes: Thank Mitch Chubey: proper fittings nearby the track to do this, right? So I remember grabbing a brake flaring tool and like kind of Mickey mousing it and getting it kind of half together and got the bottom flat like it's supposed to be. And it had the flare taper for the brake line. And I just remember stuffing it in and being like, well, the fitting will, if it goes down, it will crush it too. So it will make the fitting and it's actually, I haven't touched it since. I got kind of lucky on that one. My mill ride experience, that's what I do for a living. MitsuTimes: Okay. Mitch Chubey: And just kind of kicked in and I was able to fix it without fixing it the right way, I guess. if you were to take that fitting off, you probably wouldn't be able to tell the difference. But I lost half a day on a track I hadn't been to before. And then one thing led to another. I broke another wastegate actuator. at first I thought I had fouled some plugs because it just wouldn't run right. And then I changed spark plugs, but they weren't gapped. smaller, they were gapped to factory. So when I went back out and finally kind of sourced, figured everything out in the parking lot or the paddock, we would break up after 16 pounds of boosted, it would just crackle and pop. And I was like, okay, we'll just drive around half throttle. Remember after the event, one of the guys asked me, he's like, are you taking corner two flat? And I was like, yes, kind of. He's like, he's like, everybody has to break and slow down. I was like, you come in and it's just, and he's like, you never left. I'm only doing 160 kilometers an hour. I like, I'm half-frottling it and the car will do the corner at 160. So there's no need to slow down. He's like, well, why don't you make more power? I explained everything to him. He's like, okay, that kind of makes sense. I was like, big arrow, no power. You just kind of drive around the fast corners as fast as it goes. MitsuTimes: Sometimes it's all you need. Mitch Chubey: Yeah, no, but with full power it'd be the probably entry in that corner be close to 260 240 for sure 240 260 corners are what's that 140 150 miles an hour Corners about a hundred miles an hour most most well set up cars 2 to 3. Yeah, yeah, probably about a hundred miles an hour for corner to it area 27 MitsuTimes: Well, Mitch has has one car become kind of your favorite unexpectedly. Mitch Chubey: It's yeah, well like the wife's evo its nickname is eva It's kind of the first boy and the first love And the first passion and then like that's the one car like I try to keep Pristine as much as I can without getting too deep into it like there's a there is going to be a limit of like what i'm allowed to change on it It has to pass the wife test Like the wife can't notice it changed it kind of thing so that one's holds a Probably that's probably the one I'd have a hardest time letting go of. And that comes back to just it's an Evo. It's not a Rally Art. Rally Art's like you can find it all the time. Evo's an Evo's. Let's not kid ourselves. It's still an Evo at the end of the day. That one would probably be the hardest one. Or the one with the... And with it being a little bit more road friendly. It's the one you can hop into little more often. MitsuTimes: What's the goals for the Evo X moving forward? Mitch Chubey: I think the wife's then is just to have it set up all all finished tuned and just you can turn key drive it and then not have to change anything on it to go to the track if you want to like it's not going to be a full-on track car because that's not what it's really destined to be it still needs to have street manners that's the goal with that one it'll on a conservative unit it'll probably make 454 or 65 horsepower and then on pump it'll make 400 all day with the EFR 71 and then with mine it's I don't want to say I don't mind if these break I don't want them to but I'm willing to push the limits more on that one So that one will, it seems to be slowly transitioning more and more towards just the track. Like even shopping for suspensions, like, ⁓ they're like, how much street manners do you want? It's like, none, lap time. It's the only thing that matters in that one. The faster it can go around a track, the better. MitsuTimes: And then same question but for the rally arts. Mitch Chubey: Well, the other one doesn't run, hasn't moved. It literally came in on a trailer and it hasn't moved since. So I think that one, I've told my dad that I'm going to, that one's either for him on one condition. He has to come to the track with me. So it's almost like a, like a payback for, ⁓ for all the times that he had to put in for when we race motocross and things like that. I remember as a kid, always having to work on my bike and like didn't want to and had the tune the brakes and this and that and wash it and all that. I remember him telling me like, you're not a factory rider, you gotta earn your keep or whatever, right? And I remember when I turned pro riding mountain bikes, Fox Suspension sent me a bunch of suspension parts and on it, it said Mitch Chuby factory rider. And I remember like cutting it out and giving it to him. Like, see, I've made it. So I think it'll be something, cause he's been, lately he's been coming out to all the local events and he- He'll do lab timing and he'll peek through some of the data and stuff like that and tire temp pressures and stuff like that and lend a hand when need be. So, enjoying interest. So I think it's something that hopefully we can share together and he can drive in his rally art and I'll have mine. One's white, one's black. So yin and yang and go from there. MitsuTimes: Yeah, was gonna say, beat me to it. Yin and Yang. That's perfect. Mitch Chubey: Yeah. And he's starting to get up there. He's turning. He'll be turning. Yeah. You'll be turning 70 this fall. But he's still racing motocross and racing a class below his age at the old timers. And I think he took the overall win for his class at the last one. So he's pushing himself that way. So I think it'll be good with that. I think I should try and teach him with age comes a cage. So we'll put him in the... MitsuTimes: What a badass. Mitch Chubey: steel box and tell them it's the same thing, just no jumps. MitsuTimes: all four wheels on the ground. Mitch Chubey: Ideally. Sometimes it doesn't always happen, the curves, ideally. MitsuTimes: See you later, bye. Well, do you have any big changes to any of the cars coming up that you want to talk about? Mitch Chubey: Nope, like I've said, wife's just got its big update. It's coming off the lift, hopefully in the next week or two. Once I can find some time just to get the tune sorted and get it moving out. And then mine's going on the lift, so there'll be some definite changes there. So it's going to a bigger turbo. I have a new rear diff to put in. Got a few things to remove that I've for some weight savings. And then the wife bought me another set of rims this year, so wheels and tires for that. Same set as before, but it's good to have spares. And then just the big thing, it'll be the front arrow package, I think. It's front arrow limited. It's hard to make big arrow on a street car chassis. But I think with that, I want to remove a lot of the radiator core supports and tilt the radiator and then properly duct it out the hood. Like it has the, the, directing and everything already in the factory location. think optimizing that and then closing up a lot of the gaps that are upfront will help a lot. MitsuTimes: Well, I know you talked about, ⁓ you know, going to some tracks and trying to compete in some of the national events. Are there any tracks or events that are still in your bucket list? Mitch Chubey: Yes, it depends on how big that bucket list and how much I'm allowed to spend. I would love to go to Luguna Seca. I've been there a bunch riding bikes for the Seatr Classic, but I've never had a chance to go around on the track. So that's on the bucket list. Sonoma would be on there. And then there's a few other tracks back east that would like Kota. Kota is up there, but it's not like I have to. Walk-ins Glen would be on there. And then if I had like an endless budget, I would just put the car in a container and take it to the Nürburgring. Run the, all day, every day on a private track day. That would be the dream. That's the one track I, if I'm on the SIM, one track I go to almost every time. If you're scrolling through the open lobbies. ⁓ yeah. Or five. Yep. Let's try that. MitsuTimes: ⁓ yeah. Well, Mitch, long term, what does this fleet look like to you? Mitch Chubey: ⁓ all rolling time attack car attacking the wife's car daily track able car. My dad daily drive in the other Raleigh art, bringing it out to the track and then me and the buddies tinkering and building up the other one for as an endurance endurance car. MitsuTimes: Yeah, it doesn't even sound that long term. Sounds like very doable. Mitch Chubey: Yeah, that's what I said about the wife's car going on the lift last June and it's almost been a year and I said it's going to be six weeks and it's just crazy how with life with two little ones and trying to juggle the family and work and everything and just and it doesn't help that like when the car lift things go creep real hard sometimes and just it's already a part I might as well do this. I might as well do this too. It just starts to compound sometimes. MitsuTimes: And it's just that. I do a lot of the, well, while I'm in here, I might as well upgrade this. Mitch Chubey: Well, exactly. Then you weigh another part to put that part back together and then you're like, oh, well, I'm there. It's already that had to come out. So like, it's not that much more. Yeah, like I had the subframes and I was like, well, it's not that much more to take the transfer case out. It's only six bolts. Pull the drive shaft, pull the diff and lube the splines. Well, the diff's already out of the car. I might as well pop the cover off. Take a look inside, make sure it's all healthy. Oh, I already got the diff apart. I might as well drill out the bolt. bolt holes in order the MA to put M10s in, because it is better. Okay, well, I could really just click the diff that was in my car out of it and put it in yours. And now we're pulling another diff to change something to both. Yeah, scope creeps hard sometimes. And the farther you get into it, the more and longer it takes. MitsuTimes: dangerous rabbit hole. Mitch Chubey: Yes, especially when you're able-bodied and you have the tools and the knowledge to do so. It's just, I'm learning more and more why when you talk, and I've talked to people, I've been building this Ford Mustang 67 for 20 years and you're like, remember being a kid, like, how the hell does this take you 20 years? I'm starting to understand. You have the family, the wife, other commitments. Yep. I understand how it takes you 20 years to get to this point. MitsuTimes: priorities change really fast. Mitch Chubey: They do. MitsuTimes: Well, Mitch, where can people find and follow you on social media to so they can check out some of these cars you got in your fleet? ⁓ Mitch Chubey: ⁓ All the social media outlets ⁓ all under the same name, Mitch Chibi. One word, no space. Yeah, Facebook, Instagram. are probably my main two. And then on Facebook, on the forums, I post a lot under ⁓ Mitch Terrence, just because Facebook now won't allow me to change my name back without verifying my ID. So back when Facebook was first being Facebook, they'd limited the number of friend requests you could have to 1,000. And this was before Facebook pages. So then I changed my last name to try and keep it more for friends and family. And then now it won't change. So now on the forums, like under my name, my parents. MitsuTimes: And then lastly, Mitch, at the end, always get people to give a thanks or shout out to anybody who's helped them get the cars where they are, get themselves where they are in life. Is there anybody that you want to give a thanks or shout out to? Mitch Chubey: Yeah, there's a few people. The first person is my wife for allowing me to even be allowed to head down any of these roads and not fight me too much on a lot of the decisions. She's been a big help in that part, especially with. Well, I can almost blame her. It was her fault. She said she needed to race car, but I'll leave you there. So I love her internally for that. ⁓ Chet Rickerman, he originally tuned the car. When I first got the Rally Art, I didn't have a knowledge. to do so and I'm not gonna lie, every time he sent me a revision, I broke down exactly what he was doing through the AP software from Cobb. Cobb was originally on Cobb, it's on standalone now, but I didn't know any better at the time and so I learned a lot from him in his forum posts. I gotta give a big shout out to Danny Stark. ⁓ It seems like daily we message each other back and forth about setup. So it seems the... We're probably one of two of maybe three guys on the West Coast that are pushing the fetal tens on track, seems these days. So he's been a big resource that way. Um, I've got to thank TurboSmart again for just no questions asked, fixing their parts. And yeah, I got to thank my dad for, he originally lent me the money for the Rally Art. Paid him back right away after, but without him, I wouldn't, wouldn't have had it. And yeah, I'd say that's probably about it. ⁓ MitsuTimes: Okay. Well, Mitch, thank you so much for the time to come on here and sharing your story. I really enjoyed it. I hope others will as well. And I wish you the best of luck. Mitch Chubey: Yes, thank you and maybe see you Some of you guys are on track one day.