Latest / Gun Talk / NFA Deep Dive: Suppressor Laws, ATF Inspections & the Quietest Can Ever Made — Joe Meaux of Aklys Defense | Gun Talk Nation
Transcript
- 0:00Speaker 1: We worked to get Louisiana hunting allowed with suppressors. We
- 0:04Speaker 1: got that. They would only go for the outlaw quadruped,
- 0:08Speaker 1: just kind of the camel under the tent. But we
- 0:11Speaker 1: knew we'd be able to kind of progressively go through it.
- 0:15Speaker 1: At that, we started working on getting rid of the
- 0:16Speaker 1: state registry. We were able to do that. And then
- 0:19Speaker 1: a couple of years later, we got rid of the
- 0:22Speaker 1: requirement for outlaw quadrupeds. So now all game is open
- 0:26Speaker 1: for hunting. Except for now.
- 0:34Speaker 2: I'm Ryan Gresham. And this... This is Gun Talk Nation.
- 0:48Speaker 2: Gun Talk Nation is brought to you by Ruger, Leupold, Colt,
- 0:53Speaker 2: Savage Arms, Shooting Sports Life, and Remington Ammunitions. Hey, welcome
- 0:58Speaker 2: into Gun Talk Nation. Today on Gun Talk Nation, we're
- 1:01Speaker 2: gonna be talking the NFA and dealing with the ATF,
- 1:04Speaker 2: a little bit behind the scenes on that stuff. And
- 1:07Speaker 2: to do that, we got our buddy Joe Moe on
- 1:10Speaker 2: the show from just down the road. Joe, Ackless Defense
- 1:15Speaker 2: is the company. You guys make suppressors. You're one of the,
- 1:19Speaker 2: or the largest suppressor manufacturer in Louisiana, is that right?
- 1:22Speaker 1: We're definitely the largest NFA and suppressor shop in Louisiana.
- 1:27Speaker 1: I think probably the Gulf Coast area.
- 1:28Speaker 2: Yeah. So we've known each other for several years. And
- 1:32Speaker 2: because you've been doing it for so long, you said 2009,
- 1:37Speaker 2: making suppressors, being an NFA shop. And that's kind of,
- 1:41Speaker 2: we were saying before we started, it's like, that's like
- 1:43Speaker 2: the OG part. Like that starts to be before it
- 1:46Speaker 2: was super common for people buying all these silencers and suppressors.
- 1:50Speaker 2: And so you've kind of been there and done that
- 1:52Speaker 2: and seen things change over the years. But let's start here.
- 1:56Speaker 2: Atlas Defense. Talk about what do you guys do and
- 2:00Speaker 2: how do you do it differently?
- 2:01Speaker 1: So we're a manufacturer. We are based in Baton Rouge.
- 2:06Speaker 1: Whenever I got into the gun world, NFA world, suppressors
- 2:10Speaker 1: weren't really that common. They were known about, but they
- 2:15Speaker 1: were hard to get, especially in Louisiana. They were very
- 2:17Speaker 1: hard to get because there was a bunch of extra
- 2:18Speaker 1: steps because Louisiana had their own state NFA registry, which
- 2:24Speaker 1: was absolutely miserable. And I didn't realize how miserable it
- 2:27Speaker 1: was going to be until I started manufacturing as our
- 2:29Speaker 1: numbers started getting bigger. But we designed things and developed
- 2:37Speaker 1: things for long-term use. Because when I got into it,
- 2:43Speaker 1: we were waiting 18, 16, almost two years for an approval.
- 2:48Speaker 1: When we get it, the suppressor's already out of date.
- 2:51Speaker 1: There's newer technology out there. We're stuck with this for life.
- 2:56Speaker 1: So whenever I started designing suppressors, we went for a
- 3:00Speaker 1: future-proof concept. So all of our suppressors can always be upgraded,
- 3:05Speaker 1: whether that's lighter, quieter, faster, cheaper, everything. Is that a.
- 3:12Speaker 2: Case of the serialized part, you can swap everything else out?
- 3:16Speaker 1: That's exactly it. Okay. So we're the innovators, and if
- 3:20Speaker 1: you see a lot of that technology in some of
- 3:22Speaker 1: the other cans out there, That's more than likely we've
- 3:25Speaker 1: either designed it or we're manufacturing parts or maybe even
- 3:28Speaker 1: manufacturing the whole silencer for it. We're an OEM manufacturer.
- 3:33Speaker 1: We manufacture not under just Atlas Defense, but other suppressor
- 3:38Speaker 1: and NFA brands.
- 3:39Speaker 2: Which is common in the gun world.
- 3:41Speaker 1: Very common.
- 3:42Speaker 2: It's not really even a dig on people. There are
- 3:45Speaker 2: gun companies who other people make their guns. There are
- 3:50Speaker 2: suppressor companies where they contract out the manufacturing of the suppressors, right?
- 3:54Speaker 2: I mean, this is scopes and binos and all kinds
- 3:58Speaker 2: of things. This is very common.
- 3:59Speaker 1: In the suppressor world, the vast majority of suppressors are
- 4:03Speaker 1: made by other people. And we're just one of the,
- 4:06Speaker 1: we're one of those OEM companies. We're one of the
- 4:08Speaker 1: originators with designs and concepts and technology. We kind of
- 4:12Speaker 1: keep a lot of things in our pocket. So if
- 4:15Speaker 1: somebody comes up, it's like, hey, I've got something. Let's
- 4:18Speaker 1: build off of there. Of course, as Atlas Defense, For
- 4:22Speaker 1: that brand, we keep the best stuff for ourselves. We've
- 4:25Speaker 1: got some pretty good stuff.
- 4:26Speaker 2: So you've been dealing with this for so long. You
- 4:30Speaker 2: kind of teased it. Talk about the process of how
- 4:33Speaker 2: it's changed over the years and really talk about how difficult,
- 4:37Speaker 2: what was the process like back 15, 17 years ago?
- 4:41Speaker 1: Well, the NFA world was dark art until around 96, 98,
- 4:48Speaker 1: 2000 when the internet really started to become prevalent uh
- 4:53Speaker 1: it was back shop secrets like hey you want a
- 4:57Speaker 1: suppressor you want a machine gun right but the prices
- 5:01Speaker 1: like especially on transferable machine guns was a kind of
- 5:03Speaker 1: a slow rise it's a fixed fixed market suppressors oh
- 5:08Speaker 1: those are dangerous they make guns silent which in in
- 5:12Speaker 1: fact that they don't uh they're still significant report even
- 5:15Speaker 1: on some of the quietest suppressors Now we do manufacture
- 5:19Speaker 1: the quietest suppressor in existence.
- 5:20Speaker 2: Okay, that's a big claim. Let's get to that later, yeah.
- 5:24Speaker 1: The internet really broke the information to people and you
- 5:28Speaker 1: started seeing a really rapid rise in NFA exposure around
- 5:33Speaker 1: 2004 all the way up to 2009, which is when
- 5:36Speaker 1: my first exposure into an actual FFL and becoming a
- 5:39Speaker 1: licensee and building things there. And suppressors are super neat.
- 5:44Speaker 1: Let's build some very simple suppressors. made some, now let's
- 5:49Speaker 1: register them. How do we do that? Well, first, we
- 5:54Speaker 1: can't do a Form 2, which is typical. A manufacturer
- 5:57Speaker 1: would register a Form 2. It's a notification to the ATF. Well,
- 6:01Speaker 1: in Louisiana, prior to 2011, we had to notify the
- 6:05Speaker 1: state police, their public safety department, basically the guys that
- 6:10Speaker 1: do public safety, also the concealed carry weapons. They also
- 6:14Speaker 1: had the state registry. So we had to send hard
- 6:18Speaker 1: copies of the registration of the manufacturing notification to the state,
- 6:23Speaker 1: get approval from the state, which could take weeks, if
- 6:27Speaker 1: not months, get them back to us. Once we have that,
- 6:30Speaker 1: then we could submit a form to the ATF with
- 6:32Speaker 1: a copy of that form. After that, then the ATF
- 6:35Speaker 1: would approve it and put it into our registry for sale.
- 6:38Speaker 1: So the NFTR, the National Firearms Transaction Record, They added
- 6:43Speaker 1: another letter apparently in the last three years, but it
- 6:46Speaker 1: will always be the NFTR to me. So once that
- 6:49Speaker 1: number is in our inventory or an individual's inventory, that's
- 6:55Speaker 1: the registration of the tax payment, not a registration of
- 7:00Speaker 1: a firearm, the registration of a tax payment. So once
- 7:03Speaker 1: it's there in Louisiana at that time, now we could
- 7:07Speaker 1: look for a buyer or to sell or to transfer
- 7:10Speaker 1: it out to another dealer. So we would have that inventory.
- 7:14Speaker 1: We would find a buyer, individual out of state transfer,
- 7:17Speaker 1: another dealer or whatnot. And we had to send a
- 7:20Speaker 1: permission slip to the state police again. Hey, we want
- 7:24Speaker 1: to do this form three, this transfer from us to
- 7:27Speaker 1: somewhere else.
- 7:28Speaker 2: Like us as the manufacturer to someone buying this thing.
- 7:31Speaker 1: Correct. And then we'd wait for that in triplicate. We
- 7:36Speaker 1: get it back. We would then submit it again to
- 7:40Speaker 1: the ATF to wait for the actual transfer. So the process,
- 7:43Speaker 1: when we were doing these ones, twos, threes, fives at
- 7:47Speaker 1: a time, wasn't a huge deal. But as we started
- 7:52Speaker 1: growing and getting bigger, batches of 20, 30, 50, 100,
- 7:58Speaker 1: 100 suppressors, that's 150 pieces of paper that we had
- 8:02Speaker 1: to submit back and forth to state police, keep on record,
- 8:07Speaker 1: and then send it to the ATF, wait for approval.
- 8:09Speaker 1: and then we could try and sell it, and then
- 8:11Speaker 1: to get it out of our registry again, we had
- 8:13Speaker 1: to do the same process.
- 8:15Speaker 2: I mean, from the time you make it to actually
- 8:19Speaker 2: give the suppressor to an end user, I mean, it
- 8:22Speaker 2: could be like 18 months, more than that, maybe? Or more, yeah.
- 8:25Speaker 1: I mean, that's... At that time frame, it transitioned.
- 8:27Speaker 2: That literally is a nightmare. That is a nightmare doing business.
- 8:31Speaker 2: I mean, it's just absolutely crazy.
- 8:34Speaker 1: Well, explain why there wasn't many suppressor shops in Louisiana.
- 8:38Speaker 2: No kidding, no one wants to mess with it. Only
- 8:40Speaker 2: crazy people, Joe.
- 8:41Speaker 1: Yeah, only people that just, I love the industry, I
- 8:44Speaker 1: love guns. Suppressors were really cool. Got into it and
- 8:49Speaker 1: growing from there.
- 8:50Speaker 2: But that's changed now, right? I mean, Louisiana has gotten
- 8:53Speaker 2: quite a bit better. Yes. And then even, obviously, now
- 8:57Speaker 2: we have a lot of changes in the last couple years, federally,
- 9:01Speaker 2: dealing with NFA stuff.
- 9:02Speaker 1: So in 2011, we worked to get Louisiana.
- 9:08Speaker 1: Hunting allowed with suppressors. We got that. They would only
- 9:11Speaker 1: go for the outlaw quadruped, just kind of the camel
- 9:15Speaker 1: under the tent. But we knew we'd be able to
- 9:17Speaker 1: kind of progressively go through it. At that, we started
- 9:21Speaker 1: working on getting rid of the state registry. We were
- 9:22Speaker 1: able to do that. And then a couple of years later,
- 9:25Speaker 1: we got rid of the requirement for outlaw quadrupeds. So
- 9:29Speaker 1: now all game is open for hunting, except for now.
- 9:35Speaker 1: There's maybe some questions. Oh, really?
- 9:37Speaker 2: Yeah. Well, this is a good kind of message for
- 9:39Speaker 2: people listening and watching this is we want things to
- 9:44Speaker 2: happen quickly, but it doesn't happen quickly. Certainly in gun laws,
- 9:49Speaker 2: gun regulations, state regs, it takes a while. It can
- 9:52Speaker 2: take years of plugging away at it. And honestly, there
- 9:56Speaker 2: is kind of that plan like, okay, this is a five,
- 10:00Speaker 2: six year plan of like, okay, we're going to get
- 10:02Speaker 2: this passed and we're going to get this allowed. And
- 10:05Speaker 2: then we can expand it from there because they're going
- 10:07Speaker 2: to see that there aren't any problems with people using
- 10:10Speaker 2: this because people will make up problems. You know, the,
- 10:14Speaker 2: the game warden guys will like, well, this could, they
- 10:17Speaker 2: could use this to poach. Well, they're already poaching. and
- 10:19Speaker 2: they're poaching without silencers. So like they're just poaching with
- 10:23Speaker 2: freaking spotlights. And then you go like this made up like,
- 10:26Speaker 2: but what if, but what if, and you go, okay,
- 10:29Speaker 2: now we've been doing it. The what if hasn't become
- 10:32Speaker 2: a problem. It's kind of like concealed carry, but what if?
- 10:35Speaker 2: Every fender bender turns into a gunfight. Well, that hasn't
- 10:39Speaker 2: really happened. So let's move on with the what if.
- 10:43Speaker 2: You know, what if the air is flat?
- 10:45Speaker 1: Well, it's the largest NFA section. I mean, there's more.
- 10:49Speaker 1: suppressors out there than anything else. At last count, it
- 10:52Speaker 1: was 6.6 million, which is way beyond what they deem
- 10:56Speaker 1: as in common use. Suppressors are out there. There has
- 11:02Speaker 1: been almost no instances of any criminal act performed with
- 11:09Speaker 1: a silencer. Almost nobody's ever caught or really poaching with suppressors.
- 11:17Speaker 1: It just really isn't. really isn't a thing. People don't
- 11:21Speaker 1: go out and do it. People that own suppressors, some
- 11:24Speaker 1: of the most law abiding people. And this is the
- 11:26Speaker 1: same thing that's been over and over. Concealed carry people,
- 11:29Speaker 1: people in the gun industry in general, they're law abiding,
- 11:33Speaker 1: good citizens. And that's what we want to support. We
- 11:37Speaker 1: have recently been thrown into what I would consider a
- 11:41Speaker 1: nightmare situation because of how fast these things are changing.
- 11:45Speaker 1: And I think it's a good opportunity. So recently, The
- 11:50Speaker 1: ATF got looped into some lawsuits. There was the Jensen
- 11:54Speaker 1: versus ATF, which is some plaintiffs versus the ATF. Basically
- 11:59Speaker 1: calling them out like, hey, now you, the NFA is
- 12:02Speaker 1: now an illegal gun registry. It was a pseudo tax
- 12:07Speaker 1: roll and you just happen to have a serial number
- 12:09Speaker 1: tied to it. We always know it was a gun registry.
- 12:13Speaker 1: The tax was just an excuse to be able to
- 12:15Speaker 1: legally allow it. Now that there's no tax, Now, all basis,
- 12:21Speaker 1: all color that you thought that this was a legit
- 12:25Speaker 1: constitutional thing is gone and out the window. So we
- 12:28Speaker 1: knew the lawsuits were coming. We knew the result that
- 12:31Speaker 1: was going to happen. We weren't expecting how fast and
- 12:34Speaker 1: immediate it was going to drop. And ATF, as a
- 12:38Speaker 1: big organization, they can't pivot and come up with things
- 12:42Speaker 1: to deal with this, nor we don't know how they're
- 12:45Speaker 1: going to deal with it yet. So we had about
- 12:47Speaker 1: a seven-day period to kind of spool up and get
- 12:50Speaker 1: together with the industry and figure out how we're going
- 12:52Speaker 1: to do it. And there's been a bunch of people
- 12:56Speaker 1: with so many different ideas and directions to do it.
- 13:01Speaker 1: There's not one dealer that's doing it the same way.
- 13:05Speaker 2: Yeah, I mean, when this Jensen case broke and, you know,
- 13:09Speaker 2: everyone's going, wait a minute, now we can just go
- 13:11Speaker 2: buy silencers on a 4473 and, like, Take it with us.
- 13:16Speaker 2: How does this work? And a lot of dealers were, yes,
- 13:21Speaker 2: were excited on the gun rights side, but a lot
- 13:23Speaker 2: of dealers are going, but we want to do this
- 13:25Speaker 2: the right way, and we need guidance from the ATF.
- 13:29Speaker 2: You teased the quietest silencer, and I want to talk
- 13:34Speaker 2: about that right after this break. Need to get on
- 13:38Speaker 2: target fast? The new LCO Pro F2 Red Dot from
- 13:41Speaker 2: Leupold was built for exactly that. Its true one-power design
- 13:46Speaker 2: and wide field of view helps you find targets quickly.
- 13:49Speaker 2: Four selectable reticles are available to match your mission or
- 13:52Speaker 2: shooting style. Add crystal clear glass, 20 daylight, and 10
- 13:57Speaker 2: night vision illumination settings, and you've got a red dot
- 14:00Speaker 2: that's ready for anything. Learn more about the new LCO
- 14:04Speaker 2: Pro F2 at Leupold.com. The Ruger LCP Max is still
- 14:10Speaker 2: one of the most popular pocket-sized personal protection pistols, and
- 14:14Speaker 2: they just made it better with the Magpul Enhanced Handgun Grip.
- 14:17Speaker 2: So this one is the LCP Max with Magpul EHG.
- 14:21Speaker 2: Has nice texture, has a little bit bigger grip module
- 14:25Speaker 2: on it, so you can get a little bit more
- 14:26Speaker 2: grip on the gun. Has a 13-round magazine, also a
- 14:30Speaker 2: 10-round magazine. So it's just been enhanced a bit. Still small,
- 14:35Speaker 2: still easy to shoot. and still very reliable as a Ruger.
- 14:40Speaker 2: So go check it out, the Ruger LCP Max with
- 14:43Speaker 2: Magpul EHG. Your new favorite TV channel is here, Shooting
- 14:47Speaker 2: Sports Life, the first and only TV channel dedicated to
- 14:52Speaker 2: the shooting sports. It's a destination for enthusiasts who push
- 14:55Speaker 2: the limits of skill, athletes and public figures who share
- 14:58Speaker 2: a genuine passion for the sport, and creators who truly
- 15:02Speaker 2: live life on the range. To learn more about how
- 15:05Speaker 2: to watch Shooting Sports Life, go to shootingsportslife.com. It's a free, live,
- 15:10Speaker 2: 24-7 TV channel available for streaming apps and also on
- 15:15Speaker 2: your smart TV. And you can learn more on how
- 15:18Speaker 2: to watch it at shootingsportslife.com. All right, so Joe, you
- 15:24Speaker 2: said the quietest silencer out there. And then, I mean,
- 15:28Speaker 2: tell me about this because this is really kind of
- 15:30Speaker 2: a a design that is, I guess, the quietest type
- 15:34Speaker 2: of design, type of silencer. Is that right?
- 15:35Speaker 1: Yeah. So you got, there's major suppressor designs. There's like
- 15:40Speaker 1: a baffle stack and there's monocore. And then there's another
- 15:44Speaker 1: technology called wipe technology. And it's, I guess, kind of
- 15:48Speaker 1: the original earlier technology. Wipes were very popular back in
- 15:55Speaker 1: the 70s and 80s because it's a physical seal, a
- 15:58Speaker 1: physical barrier in the can. So wipe technology, cans have
- 16:01Speaker 1: gotten a little bit more popular. And I think it's
- 16:06Speaker 1: a great thing because you can get very compact, very
- 16:08Speaker 1: quiet suppressors with it.
- 16:10Speaker 2: And I mean, describe what a wipe is.
- 16:12Speaker 1: All right, a wipe is a physical but flexible barrier
- 16:16Speaker 1: that the bullet passes through, pops through, and then exits,
- 16:21Speaker 1: seals back down, keeps the gas inside the can. That's
- 16:24Speaker 1: what we're, all suppressors are designed to convert the the
- 16:30Speaker 1: energy of the explosion and release it as slowly as possible.
- 16:36Speaker 1: So you can do that with heat. You can do
- 16:38Speaker 1: it with physical entrapment. You can do it by slowing it.
- 16:41Speaker 1: There's Tesla valves. There's all kinds of theories and things,
- 16:44Speaker 1: more tubes, wraps. But the wipe is a very simple
- 16:48Speaker 1: physical barrier that literally traps the gas inside the can.
- 16:53Speaker 1: And there's combinations of it where you have baffle cans
- 16:58Speaker 1: or you have wipe cans. But we manufacture a can
- 17:01Speaker 1: that has baffles and wipes. So it gets you the
- 17:07Speaker 1: best of both worlds. It extends your lifespan and things
- 17:11Speaker 1: like that.
- 17:12Speaker 2: Is it kind of fair to say it's a little
- 17:14Speaker 2: bit of like a lower tech can or the wipe system?
- 17:19Speaker 2: I mean, because they're like little rubberized discs, right?
- 17:22Speaker 1: The idea behind it, yeah, you could say it's old tech,
- 17:26Speaker 1: but with... the technology of the materials, material technologies, the
- 17:33Speaker 1: devices to hold them inside of the cans and things
- 17:36Speaker 1: like that. It's gotten to be pretty high tech. Now
- 17:41Speaker 1: they are a limited life product, but when you're looking
- 17:44Speaker 1: for that absolute quiet as possible, a wipe can is
- 17:51Speaker 1: going to be there.
- 17:53Speaker 2: It can be crazy quiet, right? If you have a
- 17:56Speaker 2: wipe can with like some sort of subsonic load, like
- 17:59Speaker 2: a 300 blackout. Like it's potentially, I mean, if you had,
- 18:04Speaker 2: I don't know, I'm just thinking about Louisiana hunting, right?
- 18:06Speaker 2: Deer at a feeder. I mean, it's potentially, you could
- 18:09Speaker 2: shoot a deer and the other deer don't run away, right?
- 18:13Speaker 1: Yeah, you can do that with most suppressors because game
- 18:16Speaker 1: animals and animals in general, they don't recognize sound. They
- 18:20Speaker 1: don't recognize what a suppressed gunshot is. It's a little
- 18:23Speaker 1: bit different because the report is diminished sound. very, very much.
- 18:29Speaker 1: The supersonic flight, so the bullet, the supersonic crack happens
- 18:34Speaker 1: off of perpendicular to the face of the bullet. So
- 18:36Speaker 1: if you're a hundred yards down the range, the bullet
- 18:38Speaker 1: sounds like it came from a hundred yards further down.
- 18:40Speaker 1: So what's happening at the animal's location, it sounds like
- 18:47Speaker 1: right there. So they don't know where to go, don't
- 18:48Speaker 1: know where to run. So especially with pig hunting, it's
- 18:50Speaker 1: become Suppressors have become the way to do that.
- 18:53Speaker 2: Yeah, pigs will just start running at you. They don't
- 18:56Speaker 2: even know where the.
- 18:56Speaker 1: Noise came from. They will typically, with even gunshot, they
- 19:00Speaker 1: would run away from the sound. With suppressed shot, they
- 19:04Speaker 1: just scatter. They don't know where we're going. So you
- 19:06Speaker 1: have pigs coming towards you, away from you, left and right.
- 19:09Speaker 1: So it gives you many, many more chances to shoot.
- 19:12Speaker 1: So you take the ones that are going... left and right,
- 19:15Speaker 1: then you go to the ones that are going away
- 19:16Speaker 1: and then you get the ones that are coming toward you.
- 19:19Speaker 1: So you can get a lot more shots out of it.
- 19:21Speaker 1: And that's typical with game animals. Now with an ultra
- 19:25Speaker 1: quiet can like a wipe equipped can, and you typically
- 19:29Speaker 1: can't use supersonic or high velocity rifle rounds with a
- 19:33Speaker 1: wipe because it'll start the deformation, lose accuracy, can damage
- 19:37Speaker 1: the can, can damage things like that. So it typically
- 19:40Speaker 1: is a pistol caliber subsonic caliber kind of thing only.
- 19:45Speaker 2: Yeah, it's kind of a specific use, but like you said,
- 19:48Speaker 2: if you're purely going for quietest possibility, the wipe cans
- 19:53Speaker 2: are hard to beat.
- 19:54Speaker 1: Yeah. And many of the manufacturers offer solutions for it,
- 20:00Speaker 1: and I think Dead Air is probably one of my favorites.
- 20:03Speaker 1: Hush Puppy has one. Gemtech, the Aurora II, is probably
- 20:07Speaker 1: one of the the older ones. So there's lots out there,
- 20:10Speaker 1: but I think my favorite segment of it or part
- 20:14Speaker 1: of it is when the ATF started regulating wipes as
- 20:20Speaker 1: suppressor parts. In the past, it kind of always been
- 20:23Speaker 1: suppressor parts, but they never really said, hey, these are
- 20:27Speaker 1: suppressor parts, you can't have spares. They started kind of
- 20:30Speaker 1: coming down on it, unfortunately, about eight to 10 years
- 20:34Speaker 1: ago with as wipes started becoming more popular. But Mike Pappas,
- 20:39Speaker 1: he's genius. It's one of my favorite videos I've ever
- 20:42Speaker 1: watched on YouTube. One of my favorite marketing things. Dead
- 20:45Speaker 1: Air makes some great stuff. Mike's got a great sense
- 20:48Speaker 1: of humor. But it was right as this was happening.
- 20:52Speaker 1: And it's a YouTube video. It starts where Mike's at
- 20:57Speaker 1: his house or some random somewhere. He's looking at a silencer.
- 21:01Speaker 1: No words, no audio or nothing. He just looks at his,
- 21:05Speaker 1: I think it was a Wolfman. They have the little
- 21:07Speaker 1: special white cat.
- 21:08Speaker 2: And Mike is a character.
- 21:09Speaker 1: He is an absolute character. He's great at the shows,
- 21:13Speaker 1: just talking to him. He loves the industry. He loves suppressors,
- 21:16Speaker 1: which is kind of cool. He just looks at the can.
- 21:22Speaker 1: And he gets, there's a clip where it shows him
- 21:24Speaker 1: going out to his car, driving in the car, showing
- 21:27Speaker 1: up at the hardware store, getting out, going down the aisle,
- 21:30Speaker 1: going to a faucet washer aisle.
- 21:33Speaker 2: He looks.
- 21:35Speaker 1: The camera zooms in on a particular part number and
- 21:39Speaker 1: it's a faucet washer. It's not a faucet washer when
- 21:42Speaker 1: it's in the can, but until it's in the can,
- 21:44Speaker 1: you have not intended to change its purpose. So it's
- 21:47Speaker 1: not a wipe yet. Gets it, it goes back to
- 21:50Speaker 1: his car, he takes it out of the wrapper, puts
- 21:51Speaker 1: it in the can. And then that's it. That's the
- 21:55Speaker 1: end of the video. No audio. But it's one of
- 21:57Speaker 1: those things that kind of shows how ridiculous some of
- 22:00Speaker 1: these things are. But also as a manufacturer, we have
- 22:03Speaker 1: to comply.
- 22:04Speaker 2: Yeah.
- 22:04Speaker 1: But. we try and still like, we're having fun with this.
- 22:10Speaker 2: Yeah, you have to. I mean, and kind of going
- 22:13Speaker 2: back to the whole NFA and ATF and compliant thing.
- 22:17Speaker 2: One of the things that some people know, some people
- 22:20Speaker 2: may not know is when you have your FFL, your
- 22:24Speaker 2: federal firearms license, and then you have the SOT part,
- 22:27Speaker 2: and then you have different, you can be an 0207,
- 22:30Speaker 2: you can be a manufacturer, you have different types of
- 22:32Speaker 2: licenses as being a, A manufacturer of silencers or firearms
- 22:36Speaker 2: or whatever. But step one is having an FFL, having
- 22:41Speaker 2: that license. And one of the things is the ATF
- 22:47Speaker 2: can show up at your physical location unannounced and do
- 22:52Speaker 2: an inspection.
- 22:53Speaker 1: At any business hour time.
- 22:55Speaker 2: Has that ever happened to you?
- 22:56Speaker 1: Oh, absolutely. All the time.
- 22:58Speaker 2: And they don't announce. They don't call first. No.
- 23:02Speaker 1: I don't believe we've ever gotten a pre-announcement call. It's like,
- 23:07Speaker 1: I think one of my favorites, really great agent, just
- 23:13Speaker 1: showed up at 9.30, we open up at 10. But
- 23:16Speaker 1: we're always there beforehand. He knocks on the door and
- 23:19Speaker 1: I look and I can probably see what I look like.
- 23:24Speaker 1: I probably had to, oh, not today.
- 23:26Speaker 2: Yeah, I don't have time for this. Not today.
- 23:28Speaker 1: It was just after a Black Friday event. and one
- 23:33Speaker 1: of our busiest weekends. Luckily, we run a pretty tight ship.
- 23:38Speaker 1: We have to. I mean, manufacturing and sales and things
- 23:40Speaker 1: like that. 9.30, it's like, I'm sorry to do this today.
- 23:44Speaker 1: I'm like, it's all right. Come on in. Let's get
- 23:47Speaker 1: her going.
- 23:48Speaker 2: I thought you were going to say, well, see, our
- 23:50Speaker 2: posted hours is 10, so you're going to have to
- 23:52Speaker 2: wait outside for a half hour. Well.
- 23:56Speaker 1: Yes, technically you could do that. You could. But, again,
- 23:59Speaker 1: you want to maintain a rapport. I mean, they're doing
- 24:02Speaker 1: their job.
- 24:03Speaker 2: It's not combative, really. Most of these agents are good people.
- 24:09Speaker 1: Most of them are good people. They're knowledgeable. But there's
- 24:13Speaker 1: always ways of looking at laws and interpreting them different
- 24:17Speaker 1: ways or looking at, worst case, looking at rules. I
- 24:21Speaker 1: hate rules. Rules are not laws.
- 24:25Speaker 2: Because that's a lot of there's there's flexibility in how
- 24:28Speaker 2: they apply more interpretation.
- 24:30Speaker 1: Yeah. Yeah. And then how and when and who rules
- 24:34Speaker 1: can be rules are made to be broken. I think
- 24:36Speaker 1: that's it.
- 24:36Speaker 2: Yeah. Yeah.
- 24:38Speaker 1: So the inconsistent application of them can be kind of frustrating,
- 24:43Speaker 1: which that's why I like laws. And that's why I
- 24:46Speaker 1: like the way that this is going for the NFA world.
- 24:48Speaker 1: I think we were able to get some laws on
- 24:50Speaker 1: the books to get some corrective action to get either
- 24:54Speaker 1: suppressors out of NFA or at least reduce the requirement.
- 25:01Speaker 1: I think worst case they're going to have to stay
- 25:02Speaker 1: in NFA because when we talk about the injunction the
- 25:06Speaker 1: court case ATF versus Jensen it was about the transfer
- 25:11Speaker 1: to the individual owners where the infringement was. As a
- 25:15Speaker 1: manufacturer we're still bound by that and there was never
- 25:19Speaker 1: any mention on how we do it. So these items
- 25:21Speaker 1: are They're going in the NFA registry no matter what.
- 25:24Speaker 1: If you're buying them on 4473, they're in that NFTR,
- 25:28Speaker 1: and that's going to be the manufacturer's or dealer's problem
- 25:32Speaker 1: to figure out how to get that. And that's the
- 25:34Speaker 1: biggest thing that the ATF needs to tell us is
- 25:36Speaker 1: how we're going to do this.
- 25:37Speaker 2: Talk about that because right when this thing broke, whenever
- 25:42Speaker 2: that was, weeks or months ago, there was a lot
- 25:46Speaker 2: of excitement. It was like, we're going to go out
- 25:48Speaker 2: and just buy silencers on 4473s But a lot of
- 25:51Speaker 2: dealers are like, I got to get guidance on this.
- 25:54Speaker 2: And you guys got heat for that from some people.
- 25:57Speaker 1: A lot of people did, especially the guys that wanted
- 25:59Speaker 1: to be super conservative. Hey, we want to know what's
- 26:02Speaker 1: going on. We were in a, I guess, a little
- 26:06Speaker 1: bit different situation because as a manufacturer, we're kind of
- 26:11Speaker 1: in the same position that Silencer Shop, that Silencer Co.,
- 26:15Speaker 1: Hucks Works, once we manufacture it. the end user, it's
- 26:19Speaker 1: going to go to a dealer before it goes to
- 26:20Speaker 1: the end user. That makes it the dealer's problem to
- 26:24Speaker 1: kind of figure out the NFTR because we still have
- 26:26Speaker 1: to transfer between manufacturer to dealer and dealer to dealer
- 26:31Speaker 1: through the NFTR. So there's a set process. There's not
- 26:34Speaker 1: a set process to get this thing out of, again,
- 26:37Speaker 1: this illegal gun registry that the ATF is still holding
- 26:41Speaker 1: to the individual. Now there's ways of doing this. It's,
- 26:47Speaker 1: It's always involved letterheads and physical copies. They're starting to
- 26:51Speaker 1: look at it, allowing emails and things. But we don't
- 26:56Speaker 1: know how the ATF is going to work with this yet.
- 27:00Speaker 2: And bottom line is you want to do it the
- 27:02Speaker 2: right way. Yep.
- 27:03Speaker 1: And nobody knows. As soon as this happened, I saw
- 27:07Speaker 1: the injunction happen. I knew that there's going to be
- 27:11Speaker 1: certain states that in their laws they have NFA call.
- 27:15Speaker 1: They specifically say NFA registration or a Form 4 or
- 27:19Speaker 1: a tax-paid transfer, things of that nature, that then becomes
- 27:24Speaker 1: their state law is bound to what's happening with NFA.
- 27:27Speaker 1: And at that point, 4473 transfers don't have a Form 4,
- 27:32Speaker 1: they don't have an NFA transfer, so those states immediately
- 27:36Speaker 1: were excluded from being able to do this. Also, possession,
- 27:41Speaker 1: so you can't take one of those 4473s into those states.
- 27:47Speaker 1: One of the biggest issues, especially here in Louisiana, is Mississippi.
- 27:50Speaker 1: Mississippi is one of those states. Okay.
- 27:53Speaker 2: Which is like, I mean, a lot of people go
- 27:56Speaker 2: just right over the line, it's an hour away or less,
- 27:58Speaker 2: and they go hunting, they go shooting, whatever. And that's
- 28:02Speaker 2: a problem if you can't take it across the state line.
- 28:04Speaker 1: With a registered Form 4 approved tax, $ 0 tax stamp
- 28:08Speaker 1: or the $ 200 tax stamp, it's perfectly legal. without that registration,
- 28:15Speaker 1: now it becomes an issue. Which Mississippi, oddly enough, they
- 28:19Speaker 1: even have an allowance for a Mississippi made suppressor has
- 28:25Speaker 1: no regulations. So it has to be made in the
- 28:28Speaker 1: state of Mississippi and say made in Mississippi on it physically.
- 28:33Speaker 1: That's one of the statutes of the law. I don't
- 28:35Speaker 1: know of anybody actually doing that because trying to have
- 28:40Speaker 1: that manufacturing in one location ATF looks at it like
- 28:44Speaker 1: if the machine's out of state, the software, the materials,
- 28:47Speaker 1: they could put interstate commerce on a lot of things.
- 28:51Speaker 1: But with Mississippi, they basically said, hey, state, local governments,
- 28:55Speaker 1: we're not going to pursue this. If you have an
- 28:57Speaker 1: in-Mississippi state suppressor, you can hunt with it, but there's
- 29:01Speaker 1: none available that I'm aware of. But that doesn't change
- 29:05Speaker 1: the fact that in their laws, regular suppressors or the
- 29:09Speaker 1: other suppressors have to be Form 4 registered.
- 29:14Speaker 2: Oh, geez, Joe. You're going to freak people out. They're
- 29:16Speaker 2: going to be like, I don't know. I thought it
- 29:17Speaker 2: was all easy, but it is easier now. But because
- 29:22Speaker 2: you've been there and done that for so long, I
- 29:24Speaker 2: know you have stories. I know you have stories from customers.
- 29:28Speaker 2: You've seen it all. And we've got to get into
- 29:32Speaker 2: that after this. The next evolution of Colt's established carbine platform,
- 29:39Speaker 2: the EPR blends proven TDP components with certified mil-spec materials, coatings, finishes,
- 29:46Speaker 2: and proprietary processes, ensuring every Colt EPR2 is built to
- 29:51Speaker 2: professional standards for reliable performance across a wide range of conditions.
- 29:57Speaker 2: Several different configurations, for the enhanced patrol rifle from Colt. Shh,
- 30:03Speaker 2: go quiet with Remington's subsonic rifle ammunition, designed for rifle
- 30:08Speaker 2: shooters who want quieter performance and enjoy shooting with a suppressor.
- 30:12Speaker 2: Operating at subsonic velocities, this ammo eliminates the loud sonic crack,
- 30:17Speaker 2: making it perfect for shooting in noise-sensitive areas tactical training,
- 30:21Speaker 2: or just a day of plinking. The reduced velocity also
- 30:24Speaker 2: minimizes recoil, offering better control and faster follow-up shots, making
- 30:29Speaker 2: it ideal for situations where stealth and accuracy are paramount.
- 30:33Speaker 2: See more on Remington's website on subsonic ammunition from Big Green.
- 30:38Speaker 2: Looking for a rifle that fits you? Check out the
- 30:40Speaker 2: new family of 110 rifles from Savage Arms, featuring AccuFit V2.
- 30:45Speaker 2: This customizable stock system gives hunters and shooters tool-free adjustment
- 30:50Speaker 2: for length of pull and comb height, helping you achieve
- 30:53Speaker 2: a more natural fit and better shooting comfort. Visit Savage
- 30:57Speaker 2: Arms today to find your new 110 and learn how
- 31:00Speaker 2: the new AccuFit V2 can help you shoot with greater
- 31:03Speaker 2: confidence and consistency. Okay Joe, so worst suppressor screw-up that
- 31:11Speaker 2: you've seen? I know you've seen a bunch of stuff.
- 31:13Speaker 1: The scariest?
- 31:14Speaker 2: Yeah.
- 31:16Speaker 1: This actually involves one of our suppressors. And like I said,
- 31:20Speaker 1: we make and manufacture a future-proof system. Very rarely do
- 31:26Speaker 1: we have issues we can't get up and running in five, 10,
- 31:29Speaker 1: 15 minutes. Warranty we get it in often can get
- 31:32Speaker 1: it same day. Well, we have one suppressor that is
- 31:36Speaker 1: the one and only suppressor that we've had a full
- 31:39Speaker 1: destruction to where it was irreparable. So this gentleman has
- 31:44Speaker 1: a 4570. and most. 45- 70s are threaded 5.8s. He also
- 31:50Speaker 1: has a. 30 cal rifle that is threaded 5.8s. Can
- 31:55Speaker 1: was perfectly designed for. 45- 70, good to go. But he
- 32:00Speaker 1: made one small error, and he put the. 30 cal 5.8s
- 32:04Speaker 1: brake on his. 45- 70. Oh, so he.
- 32:07Speaker 2: Had the right suppressor but the wrong brake.
- 32:09Speaker 1: Right gun, right ammo, right suppressor, wrong brake. It's marked
- 32:14Speaker 1: on it, says 30, five eighths by 24. But in
- 32:18Speaker 1: the heat of the moment, I've seen people run 308
- 32:20Speaker 1: through 556 cans. And again, our cans are very robust.
- 32:23Speaker 1: They can typically handle it. And if not, then a
- 32:26Speaker 1: few parts replacement. The problem with this is our brakes
- 32:30Speaker 1: are very hard, 4140. The lead bullets jacketed going very slow.
- 32:38Speaker 1: It's not enough to just punch through the brake. So
- 32:42Speaker 1: when he fired this, the bullet hit the brake, stopped
- 32:46Speaker 1: in the brake, snapped the front of the brake off
- 32:49Speaker 1: and continued carrying the front of the brake and the
- 32:52Speaker 1: bullet through the can. And at that point there was
- 32:56Speaker 1: enough energy where it expanded the core and it split
- 33:00Speaker 1: the tube and then continued out the front. Now, had
- 33:03Speaker 1: it just, had it gone through anything else, the lead,
- 33:07Speaker 1: the cans are designed to be able to handle a
- 33:10Speaker 1: full bullet strike and still be repairable. In this particular case,
- 33:14Speaker 1: it's the only one we've ever had that had an issue.
- 33:17Speaker 2: It split the external tube.
- 33:18Speaker 1: It turned it into, it looks like somebody took a
- 33:23Speaker 1: toilet paper tube and unwound it.
- 33:25Speaker 2: Oh, yeah. Yeah. Well, I mean, 45-70, you're talking about
- 33:30Speaker 2: a 300 or 400 grain bullet. There's a lot of mass.
- 33:33Speaker 1: 550 grains in this one. Are you serious? It was
- 33:36Speaker 1: a big, big dude.
- 33:37Speaker 2: Oh, God.
- 33:38Speaker 1: Yeah, that's a lot. Actually, I think it was a
- 33:40Speaker 1: 480 grain, maybe a DGX round. Okay, okay. It was
- 33:43Speaker 1: a big round.
- 33:44Speaker 2: Yeah, that's a lot of energy. Golly.
- 33:48Speaker 1: And unfortunately, so that particular can can be assembled two
- 33:51Speaker 1: different directions. Had he, whenever last time he cleaned it
- 33:55Speaker 1: and put it back together, had he assembled it how
- 33:57Speaker 1: we normally do, we put our registered information engraving closer
- 34:01Speaker 1: to the firearm because there's much less potential issues. But
- 34:05Speaker 1: when he put it back together, had it actually flipped around,
- 34:08Speaker 1: all the engraving and registration process was up front. And
- 34:12Speaker 1: part of the split was right through the engraving. I mean,
- 34:14Speaker 1: it's done. But thankfully, $ 200 tax stamp's gone away. We've
- 34:19Speaker 1: got a new one sitting there and roll out with
- 34:21Speaker 1: a new one.
- 34:21Speaker 2: Do you guys put that up on the wall?
- 34:24Speaker 1: Yeah, this one will be on the wall. It'll be
- 34:26Speaker 1: right next to a 5.56 gun that had 300 blackouts
- 34:30Speaker 1: after it.
- 34:32Speaker 2: All right, that's a really common one. Describe what happens.
- 34:36Speaker 1: So headspace is typically based off the shoulder of the casing.
- 34:42Speaker 1: In the case of a lot of 300 blackout, especially
- 34:45Speaker 1: supersonic blackout, it can headspace off the bullet. Most ammo designers,
- 34:52Speaker 1: gun designers, they've made their ammo to where it won't
- 34:56Speaker 1: close and typically will be harder to fire. So if
- 34:59Speaker 1: you do this, you've had to have like pounded it
- 35:03Speaker 1: in or hit the forward assist. But sometimes there's certain
- 35:06Speaker 1: manufacturers that have a bullet that will load and will fire.
- 35:10Speaker 1: And if you take a 308 bullet and try and
- 35:14Speaker 1: stuff it down a 224 bore, it elongates the bullet,
- 35:18Speaker 1: pressure goes up. Oh, it still tries to make it
- 35:21Speaker 1: through there. Typically, it doesn't make it to the gas
- 35:24Speaker 1: port or it stops at the gas port. But all
- 35:27Speaker 1: that energy, all that explosion is directed back through the
- 35:30Speaker 1: gun towards the shooter out the bottom.
- 35:33Speaker 2: Magazine blows out. Yeah, just a pro tip for everybody listening.
- 35:40Speaker 2: Do not force anything. I mean, look, I can raise
- 35:44Speaker 2: my hand and go, I've tried to do it. Unbeknownst
- 35:47Speaker 2: to me, I was like, what's up with this? And
- 35:49Speaker 2: you go, oh gosh, this is a 5.56 gun and
- 35:52Speaker 2: I'm trying to look 300 blackout. And you realize it
- 35:56Speaker 2: because you go, this is acting weird. Don't force it.
- 36:01Speaker 2: Don't jam it in. Don't slam the forward assist or whatever.
- 36:05Speaker 2: Stop what you're doing. Look at the mag. Look at
- 36:07Speaker 2: your ammo. Think about what gun this is. When you
- 36:10Speaker 2: have a bunch of, AR style guns laying out on
- 36:13Speaker 2: the table, it's easy to screw it up.
- 36:15Speaker 1: Especially in a hunting situation. I'm not a big fan
- 36:19Speaker 1: of the forward assist. It's great in military realm where
- 36:22Speaker 1: if I need that last round, I got to get
- 36:24Speaker 1: that round fired. In most hunting scenarios, even self-defense situations,
- 36:30Speaker 1: we have a lot more freedom with it. So that
- 36:34Speaker 1: forward assist isn't a big benefit. I've seen more negative
- 36:38Speaker 1: use from that forward assist. But when we're talking about
- 36:42Speaker 1: 300 blackout, keeping separation, a lot of people use 300 blackout, 556,
- 36:47Speaker 1: 308 for pig hunting and night shooting. And one of
- 36:50Speaker 1: the problems is if you have your mags marked 300
- 36:55Speaker 1: blackout and your buddy has 556, under nods, night vision, thermals,
- 36:59Speaker 1: you can't see that difference.
- 37:01Speaker 2: Yep.
- 37:02Speaker 1: So what I've actually started doing is all my 300
- 37:05Speaker 1: blackout mags, they're wrapped with that metallic tape.
- 37:09Speaker 2: Nice.
- 37:09Speaker 1: That you use for the air conditioning metallic tape.
- 37:12Speaker 2: Yeah.
- 37:13Speaker 1: You can see that because there'll be a thermal difference.
- 37:16Speaker 1: There'll be a reflective difference under nods. And that's what
- 37:20Speaker 1: I use.
- 37:20Speaker 2: And you can feel it too, probably too, right? I mean,
- 37:23Speaker 2: just there's a little tactile like, oh, this is my
- 37:25Speaker 2: taped wrapped mag, right?
- 37:27Speaker 1: And it's a little bit different. Some people like to
- 37:29Speaker 1: use duct tape. But again, everybody ducts tapes mags.
- 37:33Speaker 2: Yeah.
- 37:34Speaker 1: And when under night vision, red duct tape, black duct tape,
- 37:37Speaker 1: green duct tape all look the same. But that reflective,
- 37:41Speaker 1: shiny silver looks different from anything else. So that's the
- 37:45Speaker 1: solution I've come up with to kind of keep that
- 37:49Speaker 1: from happening. Because I do use 300 blackout significantly.
- 37:53Speaker 2: Yeah, everybody does. It's great.
- 37:55Speaker 1: But when that catastrophic explosion happens, it can be pretty dangerous. Luckily,
- 38:01Speaker 1: in this case, the customer was perfectly fine. Had a
- 38:05Speaker 1: little bit of carbon imprints. and a little bit of
- 38:10Speaker 1: brass in their hands, and a couple little splashes on
- 38:13Speaker 1: their cheek. But thankfully, they were totally fine. I've seen
- 38:16Speaker 1: it happen to where there's much more damage, full cuts,
- 38:20Speaker 1: but thankfully, all the ones I've seen, people have been
- 38:22Speaker 1: wearing eye protection.
- 38:23Speaker 2: Gotta wear eye pro. You've got to. I mean, it's
- 38:26Speaker 2: one of those things, you could screw up a lot
- 38:28Speaker 2: of things, but the eyes are not forgiving. You get
- 38:32Speaker 2: something happens there, what are you gonna do? Random question
- 38:35Speaker 2: for you, what's worse? Losing the tax stamp or misplacing
- 38:40Speaker 2: the suppressor altogether?
- 38:41Speaker 1: I think misplacing the suppressor is going to be the
- 38:44Speaker 1: big deal. You can always get a replacement. Worst case,
- 38:47Speaker 1: you can send a request to the ATF to get
- 38:50Speaker 1: a certified copy. You're never going to get that replacement stamp.
- 38:54Speaker 1: These days with the digital stamps, you can just reprint
- 38:56Speaker 1: it again. But in the old days, if you had
- 38:58Speaker 1: a physical stamp, you can always request it and there'll
- 39:00Speaker 1: be a certified copy. It's like this is a certified
- 39:02Speaker 1: copy of your stamp and you're good to go.
- 39:06Speaker 2: I guess that all could be changing, too. I mean,
- 39:08Speaker 2: what do we even have a tax stamp for if
- 39:09Speaker 2: there's no tax?
- 39:10Speaker 1: Well, currently, again, because of the things with Louisiana hunting
- 39:16Speaker 1: laws and statutes, Mississippi, Colorado, Alaska, we're recommending if you're
- 39:22Speaker 1: going anywhere, go ahead and do the tax stamp. We're
- 39:24Speaker 1: seeing form for transfers right now in Hours Wow and
- 39:28Speaker 1: maybe one or two days in a lot of cases
- 39:30Speaker 1: even what trusts are seeing well under a week. Okay,
- 39:34Speaker 1: because there is So that at the start of this
- 39:37Speaker 1: I believe there's around six point six million NFA registered
- 39:41Speaker 1: suppressors It may be up a little bit more because
- 39:44Speaker 1: a few people are still doing form force. Mm-hmm, but
- 39:48Speaker 1: I'm betting that By the time this airs, we'll be
- 39:52Speaker 1: at 7 million suppressors out.
- 39:53Speaker 2: In the wild. That feels like common use to me, Joe.
- 39:56Speaker 1: It's been common use after, I believe, about 100,000 units.
- 40:00Speaker 1: So I think we hit common use somewhere back in
- 40:05Speaker 1: maybe 1963 or something.
- 40:07Speaker 2: Yeah, it's in common use, which, you know, why do
- 40:12Speaker 2: Ryan and Joe keep saying that phrase? Because it matters.
- 40:16Speaker 1: Yeah, there's a legal determination on it. But unfortunately... It's
- 40:20Speaker 1: tied to a rule. That's model law.
- 40:23Speaker 2: Yeah, yeah.
- 40:24Speaker 1: So it can be interpreted.
- 40:26Speaker 2: Man, thanks for hanging out with us. It's the world
- 40:28Speaker 2: of silencers and suppressors and manufacturing and NFA. It's a jungle,
- 40:33Speaker 2: but hopefully it's getting a little bit easier. It's certainly
- 40:35Speaker 2: getting faster. It's getting a little bit cheaper, you know,
- 40:39Speaker 2: $ 200 less. Joe Moe, I told my kids I was
- 40:43Speaker 2: having you on with me today and they were like,
- 40:45Speaker 2: Joe Moe, is that his real name? And I was like,
- 40:48Speaker 2: I think it is. I don't know, actually. I don't
- 40:50Speaker 2: know if he just made it up for being famous.
- 40:52Speaker 2: Is that your real name, Joe?
- 40:54Speaker 1: Given name is Joseph Moe, but it was my grandfather's name.
- 40:58Speaker 2: Yeah.
- 40:58Speaker 1: And the one I'm proud of. And Joseph's always shortened
- 41:01Speaker 1: to Joe.
- 41:02Speaker 2: Yeah.
- 41:03Speaker 1: A lot of the time I was always Jose, too.
- 41:06Speaker 1: But Joe Moe, that's it.
- 41:08Speaker 2: M-E-A-U-X. That's it.
- 41:10Speaker 1: And the shop in Baton Rouge is Moe Guns. So
- 41:13Speaker 1: if you need any suppressor stuff, Or if you have
- 41:15Speaker 1: any of these questions or certain situations, if you find
- 41:18Speaker 1: yourself in any of these in the NFA world, come
- 41:20Speaker 1: by and see us at MoGuns, Oculus Defense, and we
- 41:23Speaker 1: can help you out. Cool. Awesome.
- 41:25Speaker 2: Thanks for being on with us, man. Thanks for listening.
- 41:27Speaker 2: Thanks for watching. We'll see you guys all next time
- 41:29Speaker 2: on Gun Talk Nation.