Latest / Insight: Automotive & Beyond / Same broken part. A recall in Detroit. A scandal in Shanghai.
Transcript
- 0:01SPEAKER_00: Hi everyone, and welcome to Insight Automotive and Beyond.
- 0:05SPEAKER_00: I'm your host, Lin.
- 0:06SPEAKER_01: And I'm Erick, an automotive and supply chain veteran with over 20 years on the ground.
- 0:12SPEAKER_01: Welcome to the show.
- 0:14SPEAKER_00: Here, we'll have casual yet candid conversations to break down the hard tech,
- 0:18SPEAKER_00: global supply chains, and business insights from China and beyond.
- 0:22SPEAKER_01: Whether you are an industry peer,
- 0:24SPEAKER_01: a global buyer,
- 0:24SPEAKER_01: or just curious about where the tech is going, we're glad to have you with us.
- 0:29SPEAKER_01: Let's get into it.
- 0:30SPEAKER_00: There's a video going around right now that has done something I've never seen before.
- 0:33SPEAKER_00: It turned a brake pedal into a national argument.
- 0:36SPEAKER_00: A Chinese luxury EV,
- 0:38SPEAKER_00: about $100,000,
- 0:39SPEAKER_00: the flagship of a brand called Maxtro,
- 0:41SPEAKER_00: built by Huawei and Jack, was put through a stress test.
- 0:45SPEAKER_00: On camera, the driver stomped the brake pedal and the bracket that holds it snapped.
- 0:50SPEAKER_00: Within two days, it was everywhere.
- 0:51SPEAKER_00: Half of the internet was attacking the car,
- 0:53SPEAKER_00: the other half was attacking the people who tested it,
- 0:56SPEAKER_00: And almost nobody was asking the question I actually wanted answered.
- 0:59SPEAKER_00: What does this look like to somebody who builds cars for a living?
- 1:02SPEAKER_00: So today I've got Erick with me.
- 1:03SPEAKER_00: He spent 20 years in the industry, Toyota, Volvo, Jaguar,
- 1:07SPEAKER_00: Land Rover,
- 1:07SPEAKER_00: and then a Chinese EV startup where he watched a company go from zero to
- 1:10SPEAKER_00: a production car.
- 1:12SPEAKER_00: And the first thing he said to me was that this happens all the time.
- 1:15SPEAKER_01: It does.
- 1:16SPEAKER_01: This is not a freak event.
- 1:18SPEAKER_01: Parts fail in the field constantly in every industry that builds complex products.
- 1:23SPEAKER_01: And the failures come in two very different kinds.
- 1:25SPEAKER_01: Some are batch problems.
- 1:26SPEAKER_01: You can see the pattern and you can trace it.
- 1:28SPEAKER_01: Some are one-off and sometimes they can't even be reproduced a second time.
- 1:33SPEAKER_01: Those two things need completely different responses.
- 1:36SPEAKER_01: So the first job is not to conclude.
- 1:38SPEAKER_01: The first job is to judge.
- 1:40SPEAKER_01: The way we usually do it, you take the broken part and you work backwards.
- 1:43SPEAKER_01: You're trying to answer one question.
- 1:44SPEAKER_01: Was this a manufacturing problem?
- 1:46SPEAKER_01: Or was there something wrong with the original design?
- 1:48SPEAKER_01: Those two paths are leading completely different directions.
- 1:52SPEAKER_00: So take me through that.
- 1:53SPEAKER_00: You've got a broken bracket on a table.
- 1:55SPEAKER_00: What do you actually do?
- 1:57SPEAKER_01: A lot of things.
- 1:57SPEAKER_01: First, the fracture surface.
- 1:59SPEAKER_01: You look at whether it's a brutal failure or a fatigue failure.
- 2:02SPEAKER_01: You look for signs that a crack was there for a long time before the final break.
- 2:06SPEAKER_01: That single question, one hard hit or a slow crack, changes the whole investigation.
- 2:13SPEAKER_01: Then the material.
- 2:14SPEAKER_01: Harness, metallography.
- 2:16SPEAKER_01: You check whether this part is actually made from the material and the heat of steel
- 2:21SPEAKER_01: the drawing calls for.
- 2:23SPEAKER_01: Then assembly.
- 2:24SPEAKER_01: Were the bolts torqued correctly?
- 2:26SPEAKER_01: Is the shim missing?
- 2:28SPEAKER_01: Was the part installed the way the process spec says?
- 2:31SPEAKER_01: Then you recalculate.
- 2:32SPEAKER_01: You put the real load back into the model and you ask how much margin did
- 2:37SPEAKER_01: the design actually have left.
- 2:39SPEAKER_01: And then the step people outside the industry almost never mention,
- 2:42SPEAKER_01: you pull more parts from the same production batch.
- 2:45SPEAKER_01: Not one, not two.
- 2:47SPEAKER_01: Enough to tell you whether this is an individual part or a batch or a design.
- 2:52SPEAKER_01: Only after that can anyone say the world's design flaw.
- 2:55SPEAKER_00: Okay, but here's what I keep coming back to.
- 2:57SPEAKER_00: The car passed its certification, it's legally on the road.
- 3:00SPEAKER_00: So how does a part that passed certification break in service?
- 3:04SPEAKER_01: That's the right question and I want to stop on it because it's where most of
- 3:06SPEAKER_01: the public discussion goes wrong.
- 3:09SPEAKER_01: A car that can be sold has passed the mandatory tests.
- 3:13SPEAKER_01: In China, the brake pedal isn't a matter of opinion.
- 3:15SPEAKER_01: There is a mandatory national standard.
- 3:18SPEAKER_01: Without meeting it and without the test reports, you cannot put the car on the market.
- 3:22SPEAKER_01: So when a car is delivered, every pedal in it has passed the standard.
- 3:26SPEAKER_01: Which means the interesting question isn't how could it brake,
- 3:29SPEAKER_01: the interesting question is it passed, so why is it failing now?
- 3:33SPEAKER_01: And now from there, you can only go two directions.
- 3:35SPEAKER_01: Direction one, the test condition and the real world condition are not the same thing.
- 3:40SPEAKER_01: Direction two, the parts that passed and the parts that shipped are not the same thing.
- 3:45SPEAKER_01: Those are two different failures in two different places owned by two different teams.
- 3:50SPEAKER_00: Let's take the first one.
- 3:51SPEAKER_00: What does the standard actually say about a brake pedal?
- 3:53SPEAKER_00: Because I went and read it and it wasn't what I expected.
- 3:57SPEAKER_01: Right, this is the part that surprised me too, and I've been in this industry for 20 years.
- 4:02SPEAKER_01: Everyone assumes the standard says the pedal must withstand X newtons without braking.
- 4:08SPEAKER_01: It doesn't.
- 4:10SPEAKER_01: The European regulation, R13H,
- 4:13SPEAKER_01: regulates the vehicle,
- 4:14SPEAKER_01: says when the driver applies the pedal for somewhere between about 65
- 4:17SPEAKER_01: and 500 newtons, the car has to achieve a specified deceleration.
- 4:22SPEAKER_01: It's about the outcome.
- 4:22SPEAKER_01: The car has to stop.
- 4:24SPEAKER_01: On the mechanical strengths of the pedal itself,
- 4:26SPEAKER_01: it contains one general clause
- 4:28SPEAKER_01: that braking system components must not suffer physical breakage in normal use.
- 4:33SPEAKER_01: That's it.
- 4:33SPEAKER_01: No number.
- 4:34SPEAKER_01: And here's the part I find fascinating.
- 4:36SPEAKER_01: China's new mandatory standard, GV21670-2025, is written the same way.
- 4:43SPEAKER_01: It works backwards from vehicle braking performance.
- 4:46SPEAKER_01: It doesn't hand you a single number for how strong a pedal bracket has to be.
- 4:50SPEAKER_00: So where does the number come from?
- 4:52SPEAKER_00: Because there is a number in circulation.
- 4:54SPEAKER_01: It comes from an industry standard, not the mandatory one, QCT 788.
- 5:01SPEAKER_01: It specifies a strength test for the pedal assembly.
- 5:04SPEAKER_01: A longitudinal load of 1500 N, held for 5 seconds, repeated 5 times.
- 5:11SPEAKER_01: After that, permanent deformation has to stay under 5 mm and there must be no cracking.
- 5:18SPEAKER_01: And the 2025 draft revision of that same standard Proposes raising it
- 5:23SPEAKER_01: to 2000 newtons or whatever the supplier and the OEM agree on.
- 5:27SPEAKER_00: And the reading
- 5:30SPEAKER_01: in the video?
- 5:31SPEAKER_01: 11612 newtons.
- 5:32SPEAKER_01: So put the three numbers next to each other,
- 5:34SPEAKER_01: it passed the current standard and it did not reach the number that
- 5:39SPEAKER_01: the next revision is proposing.
- 5:41SPEAKER_01: Which immediately raises a much better question than the one everybody was shouting about.
- 5:46SPEAKER_01: Why is that number moving from 1500 to 2000?
- 5:50SPEAKER_01: What changed?
- 5:51SPEAKER_01: The expectations of the industry or the accumulated evidence that 1500 wasn't enough?
- 5:56SPEAKER_00: There's another difference I want to make sure we get right because it took me
- 5:59SPEAKER_00: while to see it.
- 5:59SPEAKER_00: It's not just the number, it's what kind of test it is.
- 6:02SPEAKER_01: Yes, and this is the part that matters most.
- 6:05SPEAKER_01: That standard test is static.
- 6:07SPEAKER_01: You apply a constant load, hold it for 5 seconds, release it, do that 5 times.
- 6:11SPEAKER_01: That's it.
- 6:13SPEAKER_01: What happened in that video is a driver repeatedly and violently stamping on the pedal.
- 6:18SPEAKER_01: That's dynamic repeated impact loading.
- 6:22SPEAKER_01: Think of it this way.
- 6:23SPEAKER_01: A static test is like carefully setting a bucket of water down on the table
- 6:27SPEAKER_01: and checking whether the table collapses.
- 6:29SPEAKER_01: A dynamic test is like slamming buckets of water onto the table,
- 6:33SPEAKER_01: one after another, and counting how many it survives.
- 6:37SPEAKER_01: Same table, completely different exam.
- 6:40SPEAKER_01: So when I say the test condition and the real condition may not be the same thing,
- 6:44SPEAKER_01: that's what I mean.
- 6:45SPEAKER_01: It's not that the standard is wrong,
- 6:47SPEAKER_01: it's that the standard is measuring a different thing from the thing that happened.
- 6:51SPEAKER_00: So if both directions are possible, what's the relationship between them?
- 6:55SPEAKER_01: This is what I most want to say, and it's where I think almost all the commentary got it wrong.
- 7:00SPEAKER_01: Look at what the two directions actually are.
- 7:03SPEAKER_01: Direction one,
- 7:04SPEAKER_01: the design didn't carry enough margin,
- 7:06SPEAKER_01: and the validation didn't cover the real load case.
- 7:08SPEAKER_01: That's a design problem.
- 7:10SPEAKER_01: Direction two, the samples passed, but the production parts didn't hold.
- 7:16SPEAKER_01: That's a supplier quality management problem.
- 7:19SPEAKER_01: Those may amplify each other, but the more important point is that they are not the same thing.
- 7:23SPEAKER_01: There are two different capabilities inside two different organizations measured
- 7:27SPEAKER_01: by two different sets of numbers.
- 7:30SPEAKER_01: So the moment the public conversation collapses into its design flaw,
- 7:34SPEAKER_01: the analysis has already gone wrong.
- 7:36SPEAKER_01: It has taken a question about two capabilities and compressed it into a verdict
- 7:40SPEAKER_01: about one department.
- 7:42SPEAKER_01: And the fixes are different too.
- 7:44SPEAKER_01: One means changing the design inputs and the validation standard.
- 7:47SPEAKER_01: The other means tightening change control and process control in the supply chain.
- 7:52SPEAKER_01: Two different lines, two different teams, two different budgets.
- 7:56SPEAKER_01: That's also why I'm reluctant to talk about this as, does this company know how to build cars?
- 8:01SPEAKER_01: It's a structural risk that any company in this industry carries.
- 8:05SPEAKER_01: Design margin and manufacturing quality are two lines of defense.
- 8:09SPEAKER_01: Either one gets weak and sooner or later something shows up in the field.
- 8:12SPEAKER_00: Let's stay with the standards for a second because there's a version
- 8:15SPEAKER_00: of this argument that goes Chinese standards are just too loose.
- 8:19SPEAKER_01: I don't think you can say that because the mandatory standard is the floor and
- 8:23SPEAKER_01: the floor is not the target.
- 8:25SPEAKER_01: The real question is not how strict the standard is.
- 8:27SPEAKER_01: The real question is what the company's own internal standard is.
- 8:31SPEAKER_01: Do you aim at the floor or do you set your own bar well above it?
- 8:35SPEAKER_01: I'll give you an example that a lot of people my age in this industry will remember.
- 8:39SPEAKER_01: Years ago, people said Japanese cars were built to a lower quality in China than in Japan.
- 8:44SPEAKER_01: And there was something to it,
- 8:45SPEAKER_01: because at that time, Japan's domestic standards were far stricter than China's.
- 8:50SPEAKER_01: So if you were running a joint venture and you were under cost pressure,
- 8:53SPEAKER_01: the arithmetic was, we meet the Chinese standard, that's enough.
- 8:57SPEAKER_01: And honestly, I understand that companies have to control cost.
- 9:01SPEAKER_01: But there's a line in there.
- 9:02SPEAKER_01: If meeting the standard is all you've done,
- 9:04SPEAKER_01: does that mean you've deliberately decided not to carry any safety margin at all?
- 9:09SPEAKER_01: That's a question every company has to answer for itself.
- 9:12SPEAKER_00: Since we started, I've seen one explanation everywhere in the English coverage.
- 9:16SPEAKER_00: Chinese cars are developed too fast.
- 9:18SPEAKER_00: Short cycles, short cuts, and this is the result.
- 9:21SPEAKER_00: What do you make of that?
- 9:22SPEAKER_01: I don't think there's a necessary relationship there.
- 9:26SPEAKER_01: Because in 2020, Ford recalled Mustangs for the same problem.
- 9:29SPEAKER_01: Same component, the brake pedal bracket.
- 9:31SPEAKER_01: And Ford was not building Mustangs quickly.
- 9:33SPEAKER_01: That was 2020 at a plant in Flat Rock.
- 9:36SPEAKER_01: And nobody would describe Ford's development process as rushing.
- 9:40SPEAKER_01: So if speed is the explanation, you have to explain Ford.
- 9:44SPEAKER_01: What I'd say instead is that design problems exist everywhere, at every company, at every speed.
- 9:49SPEAKER_01: It's not a national characteristic.
- 9:51SPEAKER_01: It's not a new and trend problem.
- 9:53SPEAKER_01: The real variables are how you set your standards and how much margin you decide to carry.
- 9:58SPEAKER_01: And that is a choice each company makes for itself.
- 10:01SPEAKER_00: I looked up that recall and I want to read you what Ford actually wrote
- 10:05SPEAKER_00: because it's more interesting than the headline.
- 10:07SPEAKER_00: The recall is NHTSA 20V573000.
- 10:11SPEAKER_00: It covers 2020 Mustangs, 38,005 vehicles.
- 10:14SPEAKER_00: And the stated cause is that the brake pedal bracket was changed from nylon to polypropylene.
- 10:19SPEAKER_00: And Ford's own language is that it had insufficient design margins.
- 10:23SPEAKER_00: The failure location is at the pedal pivot.
- 10:25SPEAKER_00: The condition is braking that requires heavy pedal force.
- 10:29SPEAKER_01: Put those three sentences together and it's a very good education in one paragraph.
- 10:33SPEAKER_01: Material change is a cost or weight-driven decision.
- 10:36SPEAKER_01: Insufficient design margin only became visible after that change.
- 10:40SPEAKER_01: The failure location is the pivot, the same area we're talking about here.
- 10:44SPEAKER_01: And the condition is heavy braking.
- 10:46SPEAKER_01: So the lesson isn't new companies build fast and break things.
- 10:49SPEAKER_01: The lesson is when your standard and your marginal asset just barely high enough,
- 10:54SPEAKER_01: then any cost optimization, any material substitution can eat the remaining margin.
- 10:59SPEAKER_01: And nothing in a static single load certification test will catch it.
- 11:04SPEAKER_00: I want to go back to something you said earlier, because I think it's the piece people skip.
- 11:08SPEAKER_00: You said the part that passed and the part that shipped may not be the same thing.
- 11:13SPEAKER_00: What does that look like in practice?
- 11:15SPEAKER_01: This is the end of the story that's much closer to the everyday business.
- 11:19SPEAKER_01: When a part is developed, the supplier sends samples.
- 11:22SPEAKER_01: And the samples are made in the best possible state.
- 11:25SPEAKER_01: New tooling, tuned process, tightest inspection.
- 11:29SPEAKER_01: So of course, the samples pass.
- 11:30SPEAKER_01: That's the easy part.
- 11:32SPEAKER_01: The hard part is after start of production,
- 11:34SPEAKER_01: because what you're buying then isn't the part, it's consistency.
- 11:37SPEAKER_01: One part, over and over, thousands of times, all the same.
- 11:41SPEAKER_01: For structural parts, an OEM normally has three gates.
- 11:44SPEAKER_01: Incoming inspection on the parts that arrive,
- 11:47SPEAKER_01: second-party audits,
- 11:48SPEAKER_01: your own people walking the supplier's line,
- 11:50SPEAKER_01: and periodic durability testing on parts pulled from series production.
- 11:54SPEAKER_01: Now, if a cost reduction is achieved by changing the material,
- 11:58SPEAKER_01: changing the process, or thinning a wall, That has to go through a change process.
- 12:03SPEAKER_01: Does it get raised?
- 12:04SPEAKER_01: Does it get revalidated?
- 12:06SPEAKER_01: And how deeply?
- 12:08SPEAKER_01: That's the part of the story I want every company in the supply chain to audit.
- 12:13SPEAKER_01: Because if that step is loose, the other two gates don't save you.
- 12:18SPEAKER_01: Incoming inspection looks at appearance and dimensions.
- 12:22SPEAKER_01: It can't see that the material changed.
- 12:25SPEAKER_01: And durability testing only catches what it happens to sample.
- 12:30SPEAKER_01: Which is what I meant at the beginning when I said one of the questions is did OEM cache it?
- 12:33SPEAKER_01: That's not an accusation against ML.
- 12:35SPEAKER_01: It's the checklist item.
- 12:37SPEAKER_01: Every company that makes structural parts should walk back through after a week like this one.
- 12:42SPEAKER_00: Let me pull this back to the driver's seat because that's
- 12:44SPEAKER_00: where most people listening to this actually sit.
- 12:46SPEAKER_00: If I see a story like this about a car I own, what should I do?
- 12:49SPEAKER_01: Three concrete things and none of them are hard.
- 12:52SPEAKER_01: 1.
- 12:53SPEAKER_01: Check for recalls.
- 12:54SPEAKER_01: In China, that means the defect information system run by the market regulator.
- 12:59SPEAKER_01: You enter your VIN and it tells you whether your car is in a campaign.
- 13:03SPEAKER_01: In the US, it's NHTSA site.
- 13:05SPEAKER_01: In Europe, it's your national authority.
- 13:07SPEAKER_01: That's the only authoritative answer to, is my car affected?
- 13:12SPEAKER_01: 2.
- 13:12SPEAKER_01: Watch the part, not the news.
- 13:14SPEAKER_01: You use that pedal every day.
- 13:16SPEAKER_01: If it starts making a noise,
- 13:18SPEAKER_01: if it feels gritty,
- 13:19SPEAKER_01: if the travel changes,
- 13:21SPEAKER_01: if it comes back up slowly, that's your car telling you something.
- 13:25SPEAKER_01: That's worth more than a hundred videos.
- 13:29SPEAKER_01: 3.
- 13:29SPEAKER_01: Don't dismantle it and don't add anything to it.
- 13:32SPEAKER_01: The mounting points involve specified torque and on a lot of these assemblies
- 13:36SPEAKER_01: the fasteners are single use.
- 13:38SPEAKER_01: If you touch it yourself you've created a new variable.
- 13:41SPEAKER_01: And the last thing,
- 13:42SPEAKER_01: don't let a video replace your own judgment,
- 13:45SPEAKER_01: but don't let it make you dismiss your own judgment either.
- 13:48SPEAKER_01: Both of those are mistakes.
- 13:50SPEAKER_00: One more thing I want to ask, because you said something earlier that stopped me.
- 13:53SPEAKER_00: You said a video can't tell us everything.
- 13:55SPEAKER_00: What can't we know from that clip?
- 13:58SPEAKER_01: Two things, and I want to be careful here, because they're different.
- 14:01SPEAKER_01: The first is a fact the part broke.
- 14:04SPEAKER_01: That's not in dispute.
- 14:05SPEAKER_01: The second is a judgment.
- 14:07SPEAKER_01: Is this a design defect, an individual failure, or something about the test itself?
- 14:11SPEAKER_01: And between the fact and the judgment, there's a lot of distance.
- 14:15SPEAKER_01: Also, here's what the video genuinely cannot show you.
- 14:18SPEAKER_01: What happened to those cars before the test?
- 14:20SPEAKER_01: Had that pedal already been through something abnormal?
- 14:23SPEAKER_01: Was it already sitting on the edge and this was the press that finished it?
- 14:26SPEAKER_01: Or was it a completely untouched car that left the factory and failed in the driver's hands?
- 14:31SPEAKER_01: Those two scenarios point at completely different conclusions,
- 14:35SPEAKER_01: and there's no camera angle that distinguishes them.
- 14:38SPEAKER_01: There's one more observation worth making.
- 14:40SPEAKER_01: After that video came out,
- 14:41SPEAKER_01: a lot of other people tried to reproduce it,
- 14:44SPEAKER_01: and in a lot of those attempts, they couldn't break the pedal at all.
- 14:47SPEAKER_01: That doesn't prove the car is fine,
- 14:48SPEAKER_01: but it does prove that one clip is a dangerous basis for a verdict.
- 14:52SPEAKER_00: Can I ask you directly what you make of the third-party testing industry itself?
- 14:56SPEAKER_00: Because you told me you basically don't watch it.
- 14:59SPEAKER_01: I don't, and I want to be precise about why.
- 15:03SPEAKER_01: If a testing channel lives on traffic and commercial deals, then it is a profit-making business.
- 15:08SPEAKER_01: Now, does a profit-making business produce by a test?
- 15:10SPEAKER_01: I can't prove that and I'm not going to pretend I can.
- 15:13SPEAKER_01: But it does mean something specific.
- 15:15SPEAKER_01: What it hands you is a content product, not an engineering report.
- 15:21SPEAKER_01: Those are different things.
- 15:21SPEAKER_01: An engineering report hands you the test conditions,
- 15:24SPEAKER_01: the state of the sample,
- 15:25SPEAKER_01: the load curve, and the boundaries within which the conclusion holds.
- 15:29SPEAKER_01: A content product hands you a conclusion in a moment you'll remember.
- 15:32SPEAKER_01: That difference is why I don't watch it.
- 15:34SPEAKER_01: It doesn't mean everything you says is wrong.
- 15:36SPEAKER_01: It means it isn't a document you can build a technical conclusion on.
- 15:41SPEAKER_00: Last thing,
- 15:41SPEAKER_00: and it's less about engineering than about how companies behave afterwards,
- 15:45SPEAKER_00: because that's the part I found most striking.
- 15:47SPEAKER_01: Same story, two different endings.
- 15:50SPEAKER_01: Ford found the risk themselves, and they went to the regulator and reported it voluntarily.
- 15:56SPEAKER_01: 38,005 cars, the word that matters is voluntarily.
- 15:59SPEAKER_01: And in this case,
- 16:01SPEAKER_01: what the public heard,
- 16:02SPEAKER_01: as far as I can tell,
- 16:03SPEAKER_01: was something like, if you need it, we'll upgrade it for your free of charge.
- 16:08SPEAKER_01: Free of charge and a voluntary recall may be the same repair,
- 16:12SPEAKER_01: but to a customer, there are two completely different events.
- 16:15SPEAKER_01: Some people will say a voluntary recall is an admission that you are wrong,
- 16:19SPEAKER_01: I don't think you have to see it that way.
- 16:21SPEAKER_01: There's a better frame.
- 16:21SPEAKER_01: You have a responsibility to the people who bought your car.
- 16:25SPEAKER_01: We found the risk, so we're dealing with it before anyone had to make it.
- 16:28SPEAKER_01: That action is a brand asset.
- 16:30SPEAKER_01: It's one of the cheapest pieces of trust a car company can buy,
- 16:33SPEAKER_01: and it's the one most companies don't spend.
- 16:36SPEAKER_01: Compared with the big international players, I think this is where the gap still is.
- 16:41SPEAKER_00: So let me ask you to close it out.
- 16:42SPEAKER_00: If you had to leave people with one question, what is it?
- 16:46SPEAKER_01: I'll make it a choice.
- 16:48SPEAKER_01: Something like this happens in front of you.
- 16:50SPEAKER_01: How do you file it?
- 16:51SPEAKER_01: Is it a standards problem?
- 16:52SPEAKER_01: The standard didn't cover that load case?
- 16:56SPEAKER_01: Or is it an execution problem?
- 16:58SPEAKER_01: The standard was there,
- 16:59SPEAKER_01: and the execution between the standard and the shipped part is where it broke down.
- 17:03SPEAKER_01: Those two answers lead down two completely different roads.
- 17:07SPEAKER_01: One of them means raising standards.
- 17:10SPEAKER_01: The other means controlling a supply chain much more tightly.
- 17:14SPEAKER_01: So tell me in the comments which one you'd pick.
- 17:17SPEAKER_00: And that wraps up today's episode.
- 17:19SPEAKER_00: If you found these insights helpful,
- 17:21SPEAKER_00: please hit that subscribe button on Apple Podcasts,
- 17:24SPEAKER_00: Spotify, or wherever you listen and leave us a review.
- 17:27SPEAKER_00: It really helps the show.
- 17:29SPEAKER_01: We'd also love to hear your thoughts.
- 17:30SPEAKER_01: To continue the conversation and connect with us,
- 17:32SPEAKER_01: you can find me,
- 17:33SPEAKER_01: Erick Yang, on LinkedIn and follow our Insight Automotive and Beyond newsletter.
- 17:37SPEAKER_00: Thank you so much for tuning in.
- 17:39SPEAKER_00: Keep exploring, keep looking beyond, and we'll catch you in the next one.
- 17:43SPEAKER_01: See you next time.
- 17:45SPEAKER_00: Bye.
- 17:46SPEAKER_01: Bye-bye.