Latest / BogeyBallSociety's Podcast / True or False: Fittings Can Change Your Game. True(Spec).
Transcript
- 0:00SPEAKER_03: What's up everybody?
- 0:01SPEAKER_03: Welcome back to the Bogeyball Society.
- 0:03SPEAKER_03: We are back.
- 0:04SPEAKER_03: Brian and I got to sit down with Brian Galino.
- 0:07SPEAKER_03: He is the uh master fitter at True Spec up in Boston.
- 0:11SPEAKER_03: He's Brian's um like actual fitter.
- 0:14SPEAKER_03: Um I think he also built his clubs for him as well.
- 0:18SPEAKER_03: Um we had a blast.
- 0:20SPEAKER_03: We just sat down, we talked every single thing I could think of to ask.
- 0:25SPEAKER_03: Uh we talked about the what uh Brian's experience was going to True Spec, uh what he ended up in, um, what any kind of fads or or uh new things are going on.
- 0:36SPEAKER_03: We actually did record this back uh a couple months ago before we went to Sand Valley.
- 0:40SPEAKER_03: So um we've had this in the can, it's just kind of been a little while coming, but um it's such, it's so much fun.
- 0:46SPEAKER_03: If you are a golf nerd, and I'm I'm assuming you are listening and or watching this because that accurately describes you.
- 0:53SPEAKER_03: It's not a pejorative, it's um, you know, it's it's one golf nerd talking to uh another.
- 0:59SPEAKER_03: Anyway, um if you are a golf nerd, I I think you might really, really love this episode.
- 1:03SPEAKER_03: Anyway, uh stick around, I'll see you on the other side.
- 1:06SPEAKER_03: All right.
- 1:32SPEAKER_01: Oh, perfect.
- 1:33SPEAKER_01: You've been you've been replaced.
- 1:34SPEAKER_01: It's okay.
- 1:35SPEAKER_01: Perfect.
- 1:36SPEAKER_01: Oops.
- 1:37SPEAKER_01: Honestly, that's a good name.
- 1:40SPEAKER_01: Like Bogie, the Bogie Brian's.
- 1:41SPEAKER_01: I'd rather it be Birdie Bryan.
- 1:43SPEAKER_01: Like that'd be better.
- 1:44SPEAKER_01: Yeah, you don't get to choose.
- 1:46SPEAKER_01: No, yeah.
- 1:47SPEAKER_03: It's Bogey Bryant's that's but that's what it is.
- 1:49SPEAKER_03: We're rebranding.
- 1:50SPEAKER_03: We're still hoping to get like one or one or two listeners, and then and then we'll spring all 50 on them just to just to inundate them.
- 1:58SPEAKER_03: Just here's 50 hours of us babbling.
- 2:00SPEAKER_03: Just zoning out to it.
- 2:02SPEAKER_03: Exactly.
- 2:02SPEAKER_03: Yeah.
- 2:03SPEAKER_00: I'm sleepy.
- 2:04SPEAKER_00: I need to listen to something.
- 2:05SPEAKER_00: How about the Bogey Bryant Society?
- 2:07SPEAKER_00: Uh there we go.
- 2:08SPEAKER_00: I love it.
- 2:08SPEAKER_00: The smoothing Boston accent to just soothe you into lullaby.
- 2:11SPEAKER_01: Yes, it definitely soothes you just like uh six-pack of Bud Heavy soothes you to sleep.
- 2:16SPEAKER_03: Yeah.
- 2:17SPEAKER_03: It's like my my sleep my sleep app is just it's always like a Boston accent.
- 2:22SPEAKER_02: All right, you're in like a really cool yoga room or something.
- 2:25SPEAKER_02: I don't know.
- 2:26SPEAKER_02: Just take a look at the chick in the pants.
- 2:28SPEAKER_02: Yeah, that'll make you sleep.
- 2:29SPEAKER_01: All right.
- 2:31SPEAKER_01: I'll make you something.
- 2:32SPEAKER_00: Yeah, exactly.
- 2:34SPEAKER_00: Well, anyway.
- 2:35SPEAKER_01: Before Brian starts to worry exactly what he's doing here, uh, I guess maybe I'll start here and just say welcome everybody back to another episode of the Bogeball Society.
- 2:46SPEAKER_01: Um today, we have a very special guest, a good friend of mine, and somebody who has seen my golf swing and has tried to help me find better equipment.
- 2:54SPEAKER_01: Uh true spec master fitter, Mr.
- 2:57SPEAKER_01: Brian Galena.
- 2:57SPEAKER_01: How are you doing?
- 2:58SPEAKER_01: How are we doing, guys?
- 2:59SPEAKER_01: Good, man.
- 2:59SPEAKER_01: How are you doing?
- 3:00SPEAKER_01: Hanging in there, hanging out.
- 3:01SPEAKER_03: I'm so glad you're here.
- 3:03SPEAKER_03: Well, it's funny.
- 3:04SPEAKER_03: We have been talking about getting a fitter on here for maybe even since we started.
- 3:08SPEAKER_03: But like that idea of what goes into it, what what what is it, what is actually involved?
- 3:13SPEAKER_03: Because we're nerds and we all pretend we know so much about equipment.
- 3:18SPEAKER_03: But I think on some level it breaks down to like I just like hitting stuff.
- 3:22SPEAKER_03: Like that really is ultimately hit it, see if it goes straight, go on to the next thing.
- 3:26SPEAKER_03: Right.
- 3:27SPEAKER_03: Exactly.
- 3:27SPEAKER_03: Exactly.
- 3:28SPEAKER_03: Um how did you how did you get into fitting?
- 3:31SPEAKER_03: Like how did how did that how did that start?
- 3:33SPEAKER_04: Like so I've been golfing since I was two, currently 38, so been golfing for 36 years.
- 3:40SPEAKER_04: Nice.
- 3:41SPEAKER_04: Figured looking for a part-time job in high school, trying to get myself involved into something that I'm passionate about.
- 3:47SPEAKER_04: So I started over at golf day back in sports authority, back in my back in my junior year in high school when I could drive.
- 3:55SPEAKER_04: Nice.
- 3:55SPEAKER_04: And um been doing it ever since.
- 3:57SPEAKER_04: So going on almost year 24 of club fitting.
- 4:00SPEAKER_04: Holy smokes.
- 4:01SPEAKER_04: Okay.
- 4:02SPEAKER_04: Yep.
- 4:02SPEAKER_01: Yeah, and I know you've done many of the local retailers.
- 4:06SPEAKER_01: Many how about all?
- 4:08SPEAKER_01: I think all of them, yeah.
- 4:10SPEAKER_01: Some of them that no longer exist.
- 4:12SPEAKER_01: Fair, yep.
- 4:12SPEAKER_01: Yep.
- 4:13SPEAKER_01: You you were working for Mizuno at one point.
- 4:15SPEAKER_01: I was a tech rep for Mizuno for about a year and a half.
- 4:17SPEAKER_01: Yep.
- 4:18SPEAKER_01: Oh, cool.
- 4:18SPEAKER_01: And then uh did you you spent some time with PXG too, right?
- 4:22SPEAKER_01: So Hayes would love to hear that.
- 4:24SPEAKER_04: So the biggest the rundown of the golf fitting cycle was golf day, golf town, golf smith.
- 4:33SPEAKER_04: Then it went over to Golf Village, I believe a private company for like running an indoor facility.
- 4:42SPEAKER_04: Uh they had like they had like six hitting bays, bar, restaurant, everything like that.
- 4:46SPEAKER_04: They're now under.
- 4:47SPEAKER_04: Um they didn't want to listen to us, but you know, who would we know?
- 4:51SPEAKER_04: Um then went over to golf's warehouse, golf galaxy, PXG, PGH superstore, and now a true spec.
- 5:00SPEAKER_00: The best of them all, true spec.
- 5:01SPEAKER_03: Yes.
- 5:02SPEAKER_03: Yeah.
- 5:02SPEAKER_03: Uh I have I have been to a true spec.
- 5:04SPEAKER_03: It's was an unbelievable experience.
- 5:06SPEAKER_03: I mean, I I don't know what exactly I was expecting, but it was better, and I had very high, like lofty expectations when I made the appointment, and it was so much fun.
- 5:16SPEAKER_03: Like it was just hours of I did a full bag fit.
- 5:19SPEAKER_03: Um, we actually ended up not even doing wedges because I was pretty pleased with my wedges at the time.
- 5:23SPEAKER_03: There you go.
- 5:23SPEAKER_03: And we just we just did irons and and uh drivers and the irons, and you'll have to assuage my my guilt here.
- 5:31SPEAKER_03: Um, how often do you see somebody shank it so that they don't hit the screen uh like six or seven times in a row and and start to like almost cry?
- 5:40SPEAKER_03: Like how often because that's that's probably pretty normal, right?
- 5:42SPEAKER_04: Because um dude, it was So the range of golfers that we see over at True Spec is anywhere from your you know mini tour tour and pros to guys that guys and and and gals that are that are going from company to company to test out brand agnostic stuff so they can find out who they want to sign with, all the way up all the way up to your juniors and your first-time golfers just looking to get fit.
- 6:08SPEAKER_04: You know, so there's really not a bias on who comes into True Spec, just because when you come into True Spec, we're just trying to get you to the best clubs for your ability.
- 6:19SPEAKER_04: We're not trying to push any prerogative, we're not trying to push any brand or or club style on you.
- 6:24SPEAKER_04: The the numbers do the talking, just allowing you to hit a golf ball, it's there one-on-one.
- 6:29SPEAKER_04: You don't have other people coming up asking me to go, you know, hey, can you get this bag down or can you can you unlock the fitting room?
- 6:36SPEAKER_04: Like, no, it's it's one-on-one.
- 6:38SPEAKER_04: You're focused on the person in front of you, and you you're just vibing.
- 6:41SPEAKER_04: You're just it's just you and them.
- 6:43SPEAKER_04: It's a fun time.
- 6:44SPEAKER_03: Yeah.
- 6:45SPEAKER_03: Well, and I honestly, I mean, I think that that really was.
- 6:47SPEAKER_03: I left with like just a giant grin on my face because not only did I get to try all the all the cool new stuff, uh, I did eventually find my swing, thank God.
- 6:57SPEAKER_03: Um but the the fit, I mean, the fitter literally just laughed.
- 7:00SPEAKER_03: He was like, Normally at this point, I just tell people to go home and come back another day.
- 7:03SPEAKER_03: The lessons are a great investment.
- 7:05SPEAKER_03: He's like, We're not just doing irons, right?
- 7:07SPEAKER_03: We're doing the whole thing.
- 7:07SPEAKER_03: So we so we switched to driver, and then I could I could swing the driver, and then that sort of like settled the nerves.
- 7:13SPEAKER_04: That's that's usually what I'll do too, is like if someone's just not hitting their irons that day and they're in for a full bag, driver's a completely different swing.
- 7:20SPEAKER_04: It's more around the body versus more up and over the body.
- 7:23SPEAKER_04: Let's let's let's get the driver.
- 7:24SPEAKER_04: It's a much bigger sweet spot, it's a lot easier to swing.
- 7:26SPEAKER_04: I I I could not care less if it goes 100 yards right or you snap hook at 60 yards left.
- 7:32SPEAKER_04: Make contact with the face, and we'll go from there.
- 7:35SPEAKER_04: Yeah, exactly.
- 7:36SPEAKER_01: I know that sometimes if I'm doing like a uh a long game fit, a driver fit, sometimes in the middle of it, I just need to be like, I need to hit a couple pitching wedges to just like stop trying to hammer the ball and get myself like back in sync.
- 7:49SPEAKER_01: You go with driver, you start getting to like pitching wedges and feel good.
- 7:53SPEAKER_04: Yeah, you get drive, you start getting to like a just more of a range mentality versus a fitting and coarse mentality.
- 7:59SPEAKER_04: So you start to up and up and up and up your speed, and it's like, well, take a second, take a breather, grab a water.
- 8:04SPEAKER_04: Yeah.
- 8:05SPEAKER_04: You know?
- 8:06SPEAKER_04: Quality over quantity.
- 8:08SPEAKER_03: Yeah.
- 8:09SPEAKER_03: Well, and I think I think that that's an that's a really good point, is uh for somebody coming into a fitting, because I know we've we've talked about this before just in general, but but from your point of view, like we've never had somebody on who was uh like a fitter, let alone a master fitter.
- 8:23SPEAKER_03: So that's right.
- 8:24SPEAKER_03: Um but from your from your POV, like what is the the best customer that can come in?
- 8:29SPEAKER_03: I don't mean I don't mean talent.
- 8:31SPEAKER_03: I mean the the thing that makes your job the easiest.
- 8:34SPEAKER_03: Is it uh is it a prep list that they like I want to try these things, or is it more like they're just open to whatever the the um fittings you know brands?
- 8:43SPEAKER_04: So the easier one is the one that comes in and goes, fit me to whatever works.
- 8:48SPEAKER_04: I'm brand, I'm brand agnostic, that's why I showed up here.
- 8:51SPEAKER_04: I know I I don't I don't care who I get fit into, you know.
- 8:54SPEAKER_04: You know, this is either my first fitting or my tenth fitting, you know.
- 8:57SPEAKER_04: Those those are the easy ones.
- 8:59SPEAKER_04: The fun ones are the ones that come in and say, I've been playing title list for the past 20 years, I need titles, title list, title, title list.
- 9:05SPEAKER_04: It's like, oh, okay.
- 9:07SPEAKER_04: Um no, I'll throw titleists into the fitting, but if it doesn't fit you, I'm I'm I'm not gonna sell it to you.
- 9:14SPEAKER_04: If you want to leave here without purchasing and go buy title list and then complain to me in a month when you know they're back ordered three months and now they don't fit you because um they weren't built properly or you know, whatever the case may be, yeah, you know, come back and see me and we can we can retrofit them.
- 9:33SPEAKER_04: I'll take I'll I'll be glad to have you come back and take some more swings and fit you to do the exact same thing I fit you into three months ago.
- 9:39SPEAKER_04: But no, those are the fun ones, the ones that come in here and just like are like I've hit this all my life, you know, I want this, you know.
- 9:44SPEAKER_04: Uh okay, I'll I'll put it into the fitting.
- 9:46SPEAKER_01: Is it getting harder to for you know being a brand agnostic company where now everybody has like five or six iron heads, everybody has four drivers.
- 9:59SPEAKER_01: Is it harder to kind of find where you think that that player is gonna fit?
- 10:05SPEAKER_04: Honestly, within a matter of 10, 15 swings, I'm eliminating half of the heads.
- 10:10SPEAKER_04: You know, when we're when someone is coming in here and is snap hooking something, I'm not giving them the draw bias.
- 10:16SPEAKER_04: I'm not giving them something with you know 12 degrees of loft.
- 10:21SPEAKER_04: You know, so that you definitely eliminate a lot of head styles within the first couple swings.
- 10:26SPEAKER_04: You know, you have some places where they'll just give you anything just a hit, you know, because you only have one company to fit from if like you're at a demo day.
- 10:34SPEAKER_04: I have I have 70,000 plus options combinations, head shafts that I can work with throughout all brands.
- 10:42SPEAKER_04: We went through a bunch of them.
- 10:43SPEAKER_04: We we did, exactly.
- 10:44SPEAKER_04: And we settled upon a set of clubs that you can actually get higher than 20 feet in the air.
- 10:48SPEAKER_04: So yes, yeah, that's the whole point.
- 10:50SPEAKER_04: That's pretty exciting.
- 10:51SPEAKER_04: Yeah, yeah.
- 10:52SPEAKER_04: He can actually hold greens now with his mid-irons.
- 10:54SPEAKER_04: So that'll be the play.
- 10:56SPEAKER_04: He'll be dropping those off to me and we'll be uh taking care of that.
- 10:59SPEAKER_04: Nice.
- 11:00SPEAKER_03: Um so when somebody comes in and you how tempting is it to give lessons when you when you see a real clear flaw, right?
- 11:09SPEAKER_03: So like if you if it's just it's like obvious night and day to you, do you do you do that?
- 11:16SPEAKER_03: Or do you is that like verboten from because I can understand how like you guys aren't you guys aren't coaches necessarily your fitters, although I do believe that you could absolutely diagnose somebody's issue.
- 11:28SPEAKER_04: Right, right, right.
- 11:29SPEAKER_04: I would say if there's a blaringly bad issue where it's a swing flaw where the fitting would be putting a massive band-aid on a swing where if they got the swing corrected, now that club that I just fit them to is a complete wrong set um or driver or or style or whatever.
- 11:47SPEAKER_04: If it's a slight little move the ball up in your stance a little bit, you know, strengthen your grip a little bit, or stand a little bit further away.
- 11:54SPEAKER_04: I always say to them, you know, we're paying for a fitting fee, but the tips are free.
- 11:59SPEAKER_06: Yeah, cool.
- 11:59SPEAKER_04: So just being able to give little tips and then say, try this for a couple of swings, see how it works.
- 12:04SPEAKER_04: And I would say nine times out of ten, that little kind of like refresher of maybe standing a little bit further away because you're indoors, you you kind of crowd yourself, you get a little bit too close, or you know, you haven't swung all winter long, and you know, you're you're maybe swinging a little bit too quick or whatever the case may be.
- 12:21SPEAKER_04: There's just a small tips to get them just more confidence and making a couple of good swings just makes everything go a lot smoother.
- 12:26SPEAKER_03: Yeah, for sure.
- 12:27SPEAKER_03: Have you seen um any trends this year?
- 12:30SPEAKER_03: As far as uh because so I'm in very light, stiff uh graphite iron shafts.
- 12:37SPEAKER_03: Okay, like 78 gram.
- 12:39SPEAKER_03: Um I really like them.
- 12:41SPEAKER_03: I did a fitting after I had gotten my clubs uh that was more like you'd probably be better off in like a 90 as opposed to a 70.
- 12:48SPEAKER_03: It's a little light.
- 12:50SPEAKER_03: Um have you seen a move for because I mean graphite's gotten significantly better.
- 12:54SPEAKER_03: I remember when my dad got graphite shafts and they were just laughable.
- 12:59SPEAKER_03: They were.
- 12:59SPEAKER_03: They were just like, you know, spaghetti noodles.
- 13:02SPEAKER_03: Yeah.
- 13:02SPEAKER_03: They were all regular or senior flex.
- 13:04SPEAKER_03: Yeah.
- 13:05SPEAKER_03: And that's and that's I mean, and they worked for that for that demo.
- 13:08SPEAKER_03: But now, given how good they are, have you seen a uh transition at all for uh people moving sort of, oh let me go lighter and and uh into a stiffer thing and and maybe that'll help or not so much yet.
- 13:22SPEAKER_04: Ailments, yes.
- 13:23SPEAKER_04: You know, a lot of people are transitioning to graphite or multimaterial, either in like the the axiom that has uh the VLOCore or Velicore like the uh like the the MMTs.
- 13:33SPEAKER_04: The MMTs, which which is the metal mesh technology, has a little s metal core with graphite around it, or a steel fiber, which is almost at the reverse of an MMT.
- 13:42SPEAKER_04: Um you know, when it comes as crazy as it sounds, when it comes to true spec being you know brand agnostic and having every head to be able to fit on every shaft, it's a different type of fitting, if that makes sense.
- 13:55SPEAKER_04: So it's not like you're going to a company that has, you know, a select variety of steel and graphite shafts because that's what they have to offer, and you can't try their custom upgraded shafts because they don't have them in the fitting cart.
- 14:10SPEAKER_04: Um it's we fit we fit more towards tempo and what levers the golfer's pulling and you know how they load and release a golf shaft where a lighter, stiffer profile could play a game.
- 14:24SPEAKER_04: And you know, when someone needs to get the ball up in the air a little bit more, graphite is definitely that option nowadays where KBS is making a great shaft, you know, Axiom from FujiCore is is awesome.
- 14:35SPEAKER_04: Uh OTI with the braided graphite is super, super easy to swing.
- 14:40SPEAKER_04: Um just just helping get the ball airborne.
- 14:43SPEAKER_04: But I I really wouldn't say it's a big trend switcher yet.
- 14:48SPEAKER_04: Um just because there's not a lot of companies that are making like that, you know, 110, 120 gram graphite shaft.
- 14:54SPEAKER_03: Yeah, that's true.
- 14:55SPEAKER_03: That's true.
- 14:55SPEAKER_03: That's there's not a lot of uh super heavy graphite graphite.
- 14:58SPEAKER_03: Uh right.
- 14:59SPEAKER_03: Not yet.
- 15:00SPEAKER_03: Not yet.
- 15:01SPEAKER_03: And I honestly, I mean um have you have you played around with gears stuff at all?
- 15:05SPEAKER_03: Because I know that that's sort of one of the things that they've talked about is that they can they can basically make it any profile they want and any weight that they want.
- 15:12SPEAKER_04: Yeah, not not through true spec.
- 15:15SPEAKER_04: Um Okay.
- 15:16SPEAKER_04: You know, I've heard about 'em.
- 15:18SPEAKER_04: Haven't really d done a deep dive into them yet, but same.
- 15:21SPEAKER_03: I I more just I I saw an awesome video where they were talking about their product.
- 15:25SPEAKER_03: And of course, it's they're talking we we've revolutionized everything.
- 15:28SPEAKER_03: Absolutely.
- 15:29SPEAKER_03: Uh the best.
- 15:31SPEAKER_03: You should only be fitting them to us.
- 15:32SPEAKER_03: That's right.
- 15:33SPEAKER_03: Yeah.
- 15:34SPEAKER_03: But I mean, I've I've I did a fitting at a place out here.
- 15:37SPEAKER_03: It's in a uh the it's called Forward.
- 15:39SPEAKER_03: And they had Oh, they're awesome.
- 15:42SPEAKER_03: It's an awesome experience.
- 15:43SPEAKER_03: And um But they make their own heads with like several different they have different bounce and loft and line.
- 15:48SPEAKER_03: So you're basically testing every single that's what their fit is, is you go do everything.
- 15:52SPEAKER_03: Custom, right?
- 15:53SPEAKER_03: Yeah, it's red.
- 15:54SPEAKER_03: And um but they had TPT graphite shafts for their for all of their irons.
- 15:58SPEAKER_03: And I I mean, you know, I was like, ha, these are amazing.
- 16:01SPEAKER_03: How much?
- 16:02SPEAKER_03: Never mind.
- 16:02SPEAKER_03: Never mind.
- 16:04SPEAKER_03: It's like it's like it's like throwing in an autoflux iron shaft in there.
- 16:07SPEAKER_04: Yeah, yeah.
- 16:08SPEAKER_03: Yeah, exactly.
- 16:09SPEAKER_03: I was like, I don't I don't need this.
- 16:10SPEAKER_03: I have to change my mind.
- 16:11SPEAKER_03: I don't I I want it, but do I need it?
- 16:14SPEAKER_03: Yes.
- 16:15SPEAKER_03: Um But what I did appreciate about that actually is that they said, you know, this is this is one option.
- 16:19SPEAKER_03: And if and here are similar shafts in the same vein as to what you what you fit into that you can and so they had, you know, three different price levels, and it was a that's good.
- 16:28SPEAKER_03: From a consumer point of view, it was a very nice experience.
- 16:30SPEAKER_03: Absolutely wasn't shoved down my throat, which is I mean, there are some there are some companies that do that.
- 16:36SPEAKER_04: Yeah.
- 16:37SPEAKER_03: Yeah, I 100% have heard naming any names.
- 16:40SPEAKER_03: Nope.
- 16:41SPEAKER_03: But I have heard several stories about about one particular kind of shaft or brand or something being kind of shoved front and center without necessarily the the results to back that up.
- 16:52SPEAKER_01: But yeah.
- 16:54SPEAKER_01: Should we talk, should we talk long game a little bit?
- 16:56SPEAKER_01: I I'm really curious to see uh Brian, your your perspective.
- 17:00SPEAKER_01: I know for me personally, I went from the Epic Max LS.
- 17:04SPEAKER_01: I can't remember you might have played that driver too.
- 17:06SPEAKER_01: I've played like all Callaway LS drivers over.
- 17:11SPEAKER_01: And last year I ended up getting fit into the G440 Max.
- 17:15SPEAKER_01: Yep.
- 17:16SPEAKER_01: I remember you telling me that it's been fantastic for me.
- 17:19SPEAKER_01: And I know we have this big kind of max MOI craze coming back again versus the low spin stuff.
- 17:29SPEAKER_01: But the max drivers now seem to be low spin enough that a lot of people can fit.
- 17:34SPEAKER_01: What are you seeing?
- 17:35SPEAKER_01: You know, are you seeing people give up their low spin driver to find more fairways, or are they are do you still see the two distinct populations?
- 17:43SPEAKER_04: I will be the the testament of what you just said.
- 17:47SPEAKER_04: I have been playing a low spin LS triple diamond calaway driver for the past eight years.
- 17:53SPEAKER_04: Um I uh over at True Spec in Scottsdale, right now being built is a quantum max driver, not the LS.
- 18:00SPEAKER_04: The core model because of the fact in the past couple years, they've put a little bit of weight forward for the max models, the core models, quote unquote, the middle models, um, to give that better spin profile for a more forgiving head.
- 18:14SPEAKER_04: We're not really seeing many LS heads being sold now anymore.
- 18:20SPEAKER_04: You know, it's it's core and in and max or draw bias because of how the faces are designed now, the weighting of the club heads, the technology and the shafts being able to help lower ball flight, where back in the day it was you need to put push weight forward, go low loft, it to try and get the spin down.
- 18:39SPEAKER_04: There's so many other things now that you can do have forgiveness and still maintain that lower spin property.
- 18:45SPEAKER_03: Yeah.
- 18:45SPEAKER_03: Did you did you mess around with the triple diamond max at all?
- 18:48SPEAKER_03: Like the that that sort of betweener.
- 18:51SPEAKER_03: I did try it.
- 18:52SPEAKER_04: Um the regular triple diamond felt a lot more solid.
- 18:57SPEAKER_04: Um but I got it, I got a little bit more ball speed out of the the core quantum max.
- 19:02SPEAKER_04: Yeah, yeah.
- 19:02SPEAKER_04: It was it was way more stable.
- 19:04SPEAKER_04: Um and I think the reason because it is I play a little bit of a cut uh in my driver.
- 19:10SPEAKER_04: So the the quantum max core model is a square face, and I have a toe strike, so I pushed weight on the toe.
- 19:17SPEAKER_04: So it made my ball flight very stable, very straight, where in the triple diamond strike.
- 19:23SPEAKER_04: In the triple diamond, the uh the the face is a little bit more fade biased, so it's a little more open.
- 19:29SPEAKER_04: And then when I push weight on the toe, it makes it want to go further right.
- 19:32SPEAKER_04: So I the stability on the club head by having weight on the toe in the the middle model just gave me the best results.
- 19:39SPEAKER_04: And I tried every single head because of our seating program through TrueSpec, we get a bag through them.
- 19:44SPEAKER_04: So going through the product testing, wow, I was it was it ended up coming down between the uh Ping G440 and the Quantum Max.
- 19:53SPEAKER_04: So the Quantum Max won out by a little bit tighter dispersion and just a little bit further yardage, but they both felt amazing.
- 19:59SPEAKER_01: Yeah.
- 20:00SPEAKER_01: Oh, that's awesome.
- 20:01SPEAKER_01: Yeah, I've I've been thoroughly impressed with the G440 last year.
- 20:04SPEAKER_01: I feel like my fairway percentage went up like 15-20 points.
- 20:10SPEAKER_01: Yeah.
- 20:10SPEAKER_01: Ping I don't think I gave up that much yardage.
- 20:13SPEAKER_04: Ping had something crazy in the G425 that just sounded like a Nike Saswatch way back in the day.
- 20:21SPEAKER_04: Yeah.
- 20:22SPEAKER_04: Yeah.
- 20:22SPEAKER_04: The 430 and the 440 have been phenomenal for us.
- 20:26SPEAKER_04: They've been pretty much top three in fitting, you know, golfer dependent um in the final you know, head selections um in relation to like what has been winning the battle in the fitting types.
- 20:39SPEAKER_03: So they're ping doing a so I know Ping does their own shaft, right?
- 20:44SPEAKER_03: So that their their stock shafts are their own like Ping 2.0 or whatever, whatever they whatever they're using in the currently.
- 20:50SPEAKER_03: I know Taylor Maid.
- 20:51SPEAKER_03: Every company has something.
- 20:52SPEAKER_03: TaylorMade went to the React's shafts, which are those are their own.
- 20:56SPEAKER_03: Um closure rate.
- 20:58SPEAKER_03: And yeah, and I just I think this is a a really interesting move for them to do.
- 21:03SPEAKER_03: Hey, we picked this shaft specifically to match this head or this thing.
- 21:07SPEAKER_03: And I know Ping has done that for a really long time.
- 21:10SPEAKER_03: Um and it feels like a lot of the other companies do the same thing, but with like a you know, it's a Denali blue, or it's uh some it's not necessarily a specific thing that was manufactured for them, or at least it feels like that.
- 21:21SPEAKER_03: It's more sort of off the shelf.
- 21:22SPEAKER_04: Yeah, there's there's definitely some manufacturers that are still using quote unquote OEM shafts, meaning that are made for them.
- 21:30SPEAKER_04: Like, you know, you'll you'll you'll people say, see people say, you know, I got a Ventus in my but it doesn't but it's not but it doesn't have the Velocore.
- 21:37SPEAKER_04: It's not the Velicorp.
- 21:39SPEAKER_04: Yeah, is it really a Ventus?
- 21:40SPEAKER_04: You know, it's like you don't have the stability properties that the Velcor gives, but you're now you're you have the brand name of Ventus.
- 21:48SPEAKER_04: Right, correct.
- 21:49SPEAKER_04: You got the paint job.
- 21:50SPEAKER_04: So you know it's definitely definitely tough to tell them it's not the real thing.
- 21:54SPEAKER_04: Um it'll give a mid launch, mid spin profile, but if you take ten of those chefs and you compare them to against the Each other.
- 22:00SPEAKER_04: There are going to be 10 different chefs.
- 22:02SPEAKER_04: Oh, interesting.
- 22:03SPEAKER_04: Yeah.
- 22:03SPEAKER_04: Yeah.
- 22:03SPEAKER_03: Yeah.
- 22:04SPEAKER_03: Um, do you have a do you have a go-to when you when you when somebody comes in, do you have a go-to like, oh, you're you're this, I'm gonna throw uh the standard, I'm gonna throw a let's say Ventus, and I'm gonna throw a starting point.
- 22:18SPEAKER_04: I do, I do.
- 22:19SPEAKER_04: So I'll basically look at their their swing numbers, you know, their ball, their, you know, the launch, their spin, their height, and ascent angle.
- 22:27SPEAKER_04: I'll look at their club, I'll look at, you know, with Taylor Maid bringing into closure rate, I'll look and see what their closure rate is.
- 22:32SPEAKER_04: Just another level of of fitting um ease to find a uh a shaft to start with.
- 22:38SPEAKER_04: Um but what I'll do is I I I obviously been doing it for so long, I know what shafts will do to an extent where it's like this might this might be something that will fit you.
- 22:51SPEAKER_04: It might be something I would I would initially grab later in when I'm looking at shafts.
- 22:55SPEAKER_04: So let's try this.
- 22:57SPEAKER_04: Um I'm not just gonna grab any random shaft, but um, you know, if someone's spinning it really high, I will grab something that's that's gonna bring the flight down a little bit.
- 23:06SPEAKER_04: But no, I'm gonna try and get a shaft that's gonna be in the end the end result.
- 23:11SPEAKER_03: That's where I would start because I would look at that wall of shafts and go, oh my god, uh let's start from the left.
- 23:16SPEAKER_04: There's a there's no.
- 23:20SPEAKER_03: Uh yeah, I guess you've been doing it long enough with flex in your hand.
- 23:23SPEAKER_04: Yeah, we're gonna try them all.
- 23:24SPEAKER_03: Hey, listen,$800 is totally worth it.
- 23:26SPEAKER_03: Uh you might not need it.
- 23:28SPEAKER_03: It's mighty pink.
- 23:29SPEAKER_03: Yeah, it's pink.
- 23:31SPEAKER_03: Um that's great, though.
- 23:33SPEAKER_03: Yeah.
- 23:33SPEAKER_03: I uh I have you know, I've found I've done enough fittings now where you start to realize, like, oh yeah, I certainly fit into certain windows of shafts.
- 23:41SPEAKER_03: Yep.
- 23:41SPEAKER_03: Um how much do you ask questions of the of the person coming in for the fitting beforehand, or do you just look at their bag and kind of go, how are these working for you, and then base it off of that?
- 23:51SPEAKER_04: Or is it really just I can like looking looking at their bag, if they're coming with ping i2s, anything that I put in their hands is gonna is gonna win.
- 23:58SPEAKER_04: Um purchase clubs.
- 24:02SPEAKER_04: I love that.
- 24:04SPEAKER_04: Absolutely.
- 24:05SPEAKER_04: Uh the i twos and DCIs, those are the ones that you know people I they I hit them, I hit them well.
- 24:09SPEAKER_04: You know, they go straight.
- 24:10SPEAKER_04: And then I and then I fit them to a set of irons and they fly 35 yards for 20 yards minimum, right?
- 24:15SPEAKER_04: Yeah, exactly.
- 24:16SPEAKER_04: Oh, okay.
- 24:17SPEAKER_04: That's what I've been missing over the past 20 years.
- 24:19SPEAKER_04: Gotcha.
- 24:20SPEAKER_04: That's gotcha.
- 24:20SPEAKER_04: Exactly.
- 24:21SPEAKER_04: But um no, it's just seeing their swing, seeing, you know, you know, uh how their transition is, how their tempo is.
- 24:27SPEAKER_04: Um there's certain shafts that are stiffer in the handles, there are certain shafts that are stiffer down by the club head that I'll be grabbing.
- 24:34SPEAKER_04: You know, there's no rule of thumb where there's like a blueprint shaft where it's like, hmm, this is a good shaft to to try everything on.
- 24:40SPEAKER_04: So there's there's probably maybe five shafts that I'll start with every time, depending on the golfer.
- 24:45SPEAKER_04: Can we can we ask what they are?
- 24:47SPEAKER_04: Do you say is that is that a no-no?
- 24:49SPEAKER_04: Like do you think?
- 24:50SPEAKER_04: No, no, no.
- 24:50SPEAKER_04: No, so you want to get you in trouble, but no, I I can I can I can I can talk that stuff.
- 24:55SPEAKER_04: So it you know, Ventus does give a big variety with the red, the blue, and the black.
- 24:59SPEAKER_04: Um Diamana also has white, blue, red um tensai that we have, we have white and blue.
- 25:06SPEAKER_04: Um I'll usually grab from the Diamana or the Ventus family just because they're so consistent, they do a great job at producing golf shafts that they're very predictable.
- 25:17SPEAKER_04: So it's not like it's something where it's like, you know, you give them this club and they all of a sudden now are spinning at 5,000 RPMs more than what they just were.
- 25:26SPEAKER_04: So you you understand like the profiles of the red, the blue, the black, and you kind of go from there just based off of how they load and release the club.
- 25:35SPEAKER_04: And then there's my my dark my dark horses too that I'll grab throughout the fittings too.
- 25:40SPEAKER_03: Well, what's your what's your favorite thing to fit?
- 25:42SPEAKER_03: Like, is it driver?
- 25:42SPEAKER_03: Is it fairway?
- 25:43SPEAKER_03: Is it irons?
- 25:44SPEAKER_03: Is it the wedges?
- 25:45SPEAKER_03: Putter?
- 25:45SPEAKER_03: I don't know.
- 25:45SPEAKER_03: Like I feel like you guys do everything.
- 25:47SPEAKER_04: So honestly, it's a toss-up between drivers and irons.
- 25:50SPEAKER_04: Putting is also very fun.
- 25:52SPEAKER_04: It's a little monotonous, it's a it's a little you know, cut and dry because it's a very black and white style of fitting.
- 26:01SPEAKER_04: The putter either fits you or it doesn't fit you.
- 26:04SPEAKER_04: There's no gray area.
- 26:06SPEAKER_04: You're either you're either a plumber's neck, a heel shafted, or a face balance, or now the zero torque.
- 26:12SPEAKER_04: Uh you're either you're you're either face, you know, you're on the face, you're either a milled, a milled with insert, um, you know, insert or insert grooves.
- 26:21SPEAKER_04: So, you know, having like those types of properties, a mallet, a mid mallet, or a blade, like once you're in that mold, like we fit to a style, not a not a model.
- 26:32SPEAKER_04: So we fit you into the head style, okay, the neck style, or the hazle style, and the face style.
- 26:37SPEAKER_04: And then once we find those, then we can talk, you know, shapes, colors, you know, with with the My Spider and then the lab, whatever.
- 26:44SPEAKER_04: They have all these different options that you can look at.
- 26:46SPEAKER_04: So yeah, I would say driver and irons because you can get the most gains out of those.
- 26:50SPEAKER_03: What's uh Do you have a do you have a story where you have somebody who came in at a number and left at a number?
- 26:56SPEAKER_04: Like where it's like they gained it.
- 26:58SPEAKER_04: Absolutely, absolutely.
- 26:59SPEAKER_04: I had one guy probably two years ago at True Spec.
- 27:04SPEAKER_04: It was um probably summer of when I started.
- 27:08SPEAKER_04: Um so about three No, two years ago, two years ago.
- 27:11SPEAKER_04: So I was a year year into True Spec.
- 27:13SPEAKER_04: I'm going on a year three and a half there.
- 27:15SPEAKER_04: And he came in hundred and geez, hundred and fifteen, hundred and eighteen mile an hour clubhead speed.
- 27:22SPEAKER_04: And I said, I said, how how far do you hit your driver?
- 27:24SPEAKER_04: He says, coming in for a driver fitting.
- 27:26SPEAKER_04: I go, how far do you hit your driver?
- 27:27SPEAKER_04: Yeah, I like you know, 240, 250.
- 27:32SPEAKER_04: Oh.
- 27:33SPEAKER_01: I'm like he was spinning it like my my 4500?
- 27:38SPEAKER_01: Like what I was like, in your in your a good drive, like 240, 250?
- 27:42SPEAKER_04: Yeah, it's a little right.
- 27:45unknown: Huh?
- 27:45SPEAKER_04: So let me let me throw some let me throw some fiducials on the club face, which are like reflective dots that Foresight uses for you know capturing the data.
- 27:52SPEAKER_04: Let's take some swings.
- 27:55SPEAKER_04: Proceeds to have you know a little bit of an over-the-top swing.
- 27:58SPEAKER_04: I nothing crazy.
- 27:58SPEAKER_04: When I say a little bit, I'm talking like three or four degrees out 10.
- 28:01SPEAKER_04: Nothing, nothing like tomahawk on it.
- 28:03SPEAKER_04: So a fairly decent swing.
- 28:05SPEAKER_04: But you know, the shaft that he was using was a 60 gram regular flex, swinging almost 120 miles an hour.
- 28:12SPEAKER_04: That face is coming through seven degrees open, with with with loft at a dress of 26 or something like that.
- 28:22SPEAKER_04: It was mid-20s, spinning it at like 6,200 RPMs, uh, launch in with a launch angle of like 15.
- 28:30SPEAKER_04: Literally, literally.
- 28:31SPEAKER_04: And he was managing to still get it out there 240, 250.
- 28:34SPEAKER_04: That's unbelievable.
- 28:36SPEAKER_04: After things were all said and done, it was about 320 with about a 12-yard cut.
- 28:40SPEAKER_04: I would think so, yeah.
- 28:42SPEAKER_01: So these guys must have melted like that was the easiest sale of the goes, why didn't I do this sooner?
- 28:50SPEAKER_04: I said, I don't know, you tell me.
- 28:52SPEAKER_04: No, it was it was it was close to 60 yards of of gain distance and confidence too, because he would he would start swinging and then he would start slowing down his swing.
- 29:01SPEAKER_04: And I said, Sure.
- 29:02SPEAKER_04: Why are you slowing your swing down?
- 29:04SPEAKER_04: Oh, I'm trying to control it.
- 29:05SPEAKER_04: I I don't I don't care where it goes in here.
- 29:07SPEAKER_04: It's a 200-yard wide fairway.
- 29:09SPEAKER_04: I got 100 yards this way and 100 yards that way.
- 29:11SPEAKER_04: I don't care where you hit it.
- 29:12SPEAKER_04: I just want you to make contact and I want to show I want you to show me a swing that you feel comfortable repeating.
- 29:18SPEAKER_04: Once you find that swing that you're comfortable repeating, that's the swing that I can fit.
- 29:22SPEAKER_04: I can't fit the swing that you're swinging 60% at because for you to be able to swing consistently at 60%, it's very, very tough.
- 29:30SPEAKER_04: Yeah.
- 29:30SPEAKER_04: But when you're swinging 85-90% where a driver should be swung, you know, you never want to swing out of your shoes, but you do want to put in a good pass at it, I can fit that swing.
- 29:38unknown: Yeah.
- 29:39SPEAKER_04: And once you started showing me that, then I saw, you know, what he really had in the tank, and I was like, this is gonna be easy.
- 29:45SPEAKER_04: I had I had a setup for him in his hands in a matter of maybe 30 swings that he was absolutely roasting.
- 29:52SPEAKER_04: And and then he he wanted to continue to hit other things.
- 29:55SPEAKER_04: I'm like, we have a great wheel here.
- 29:57SPEAKER_04: Why are we reinventing?
- 29:58SPEAKER_04: Why are we trying to reinvent it?
- 30:00unknown: Yeah.
- 30:00SPEAKER_04: So you know what, Brian?
- 30:01SPEAKER_04: You know what?
- 30:01SPEAKER_04: You're right, you're right.
- 30:03SPEAKER_04: But can I hit this one a couple more times?
- 30:05SPEAKER_04: Yeah, right.
- 30:05SPEAKER_04: Yeah, exactly.
- 30:06SPEAKER_03: Okay, go ahead, go ahead.
- 30:07SPEAKER_03: Fine, fine.
- 30:08SPEAKER_03: Did he uh did he end up I mean, I'm assuming like an X X Flex something significantly stiffer.
- 30:14SPEAKER_04: He was I wanna say at the time, I don't think we have the shaft anymore.
- 30:20SPEAKER_04: It was um I think it was it was the Oban Kyoshi black that I got him into.
- 30:26SPEAKER_04: Okay.
- 30:27SPEAKER_04: And the head that I fit him to, I wanna say at the time that it was out was the uh AI Smoke.
- 30:38SPEAKER_04: Oh, okay, which was a very stable, which was a very stable driver.
- 30:42SPEAKER_04: Um we did go triple diamond.
- 30:45SPEAKER_04: Um Okay.
- 30:46SPEAKER_04: But yeah, AI Smoke, Triple Diamond with the Kyoshi Black, and it was just he was loving it.
- 30:50SPEAKER_03: Oh, that's awesome.
- 30:51SPEAKER_03: That's cool.
- 30:52SPEAKER_03: That's funny.
- 30:52SPEAKER_03: I got fit into a uh Oban Devotion uh I was gonna say you had the Oban Devo.
- 30:56SPEAKER_03: I still have it.
- 30:57SPEAKER_03: It's it's a it's a fantastic uh shaft.
- 30:59SPEAKER_03: Is it the devotion or the TR devotion?
- 31:01SPEAKER_03: The TR.
- 31:03SPEAKER_03: That's a solid shaft.
- 31:04SPEAKER_03: It's an awesome shaft.
- 31:05SPEAKER_03: Yeah, very, very stable, very easy to release the claw bed.
- 31:09SPEAKER_03: It's it was it was and it was like the it was a the no-brainer.
- 31:12SPEAKER_03: Like as soon as as soon as we fitted it in, it was just like, oh, this is so easy.
- 31:16SPEAKER_03: It's just so easy.
- 31:17SPEAKER_03: It was, you know, not automatic.
- 31:19SPEAKER_03: I mean, I'm I'm never gonna be probably automatic anything, but um, but yeah, it was that was an awesome experience, yeah.
- 31:24SPEAKER_04: Yeah, that's me and my buddies, the other fitter there, Cody.
- 31:27SPEAKER_04: Um, shout out Cody Booska.
- 31:30SPEAKER_04: Um that's one of the shafts that we used to grab a lot when someone was having a little bit of an issue trying to feel the clubhead and feel like that clubhead release.
- 31:38SPEAKER_03: Yes.
- 31:38SPEAKER_03: Yeah.
- 31:39SPEAKER_03: So funny.
- 31:39SPEAKER_04: We threw it in, we threw it in the hand, and they they're all of a sudden be able to able to square that face up and release the clubhead.
- 31:44SPEAKER_03: And you know, it was just such a great shaft.
- 31:47SPEAKER_03: Well, it's funny too, because I was coming from uh the hazardous uh smoke in the I had a Cobra speed zone or something that I had bought off the shelf and it said stiff.
- 31:57SPEAKER_03: And when I went, I had I had gone to a putter fitting also at Forward uh a couple years ago, and they CPM'd everything just they were bored out of their minds.
- 32:04SPEAKER_03: There was nobody else in there, and they're like, Can I check all your very soft?
- 32:09SPEAKER_00: Almost a full flex softer.
- 32:13SPEAKER_03: It was a stiff, it was labeled stiff.
- 32:15SPEAKER_03: Oh wow.
- 32:16SPEAKER_03: It was labeled stiff, and the guy said, How fast do you swing?
- 32:18SPEAKER_03: And I said, No, I don't know, 101.
- 32:20SPEAKER_03: And he goes, Your driver's a 3X.
- 32:23SPEAKER_03: And I said, No, no, it's a stiff.
- 32:25SPEAKER_03: Was it cut down?
- 32:26SPEAKER_03: He It must be.
- 32:28SPEAKER_03: They have no idea because I bought it off the shelf.
- 32:30SPEAKER_03: I bought it off a at Dick's.
- 32:31SPEAKER_03: I just interesting.
- 32:33SPEAKER_03: So it was, and I could it was like swinging rebar.
- 32:36SPEAKER_03: Like I literally could never feel the head.
- 32:37SPEAKER_03: I never knew where it was.
- 32:38SPEAKER_03: So it was just all guesswork.
- 32:40SPEAKER_03: And as soon as we went into something more, you know, sort of in that Oban territory, I was like, Oh, hey, look, there it is.
- 32:47SPEAKER_03: Yeah, that's where the club that is in my swing.
- 32:49SPEAKER_03: Gotcha.
- 32:49SPEAKER_03: Gotcha.
- 32:51SPEAKER_03: But uh, but it's but that was a really good example for me of this is kind of why you want to go get fit, because this shaft with this head, in theory, would fit me.
- 33:02SPEAKER_03: Correct.
- 33:03SPEAKER_03: But it didn't, like at all.
- 33:05SPEAKER_03: Because that particular shaft was just you know, whether whether it had been tipped or or something, who knows?
- 33:11SPEAKER_03: It was not uh it was not.
- 33:13SPEAKER_04: Yeah, that's it's it's it's it's crazy to see the OEM shafts that are put on the shelves for the the general consumer and how off they are based off of the actual weight and spec for flex code.
- 33:30SPEAKER_04: It's it's crazy.
- 33:31SPEAKER_04: It's absolutely crazy.
- 33:32SPEAKER_04: And that's something that True Spec you know really prides himself in is that what you get fit to is exactly what you get built because of swing weight, CPM numbers, um, being able to bore out the head or add tip weight, um, and then checking the shaft where we have a bunch of shafts on hand.
- 33:52SPEAKER_04: You know, if you're cutting the shaft down, you're stiffening it.
- 33:54SPEAKER_04: If you're making a little longer, you're making it a little softer.
- 33:56SPEAKER_04: So when we actually CPM the shaft, um we have every every shaft in our studio is CPM'd.
- 34:02SPEAKER_04: So we know exactly how many cycles per minute each shaft is.
- 34:04SPEAKER_04: So when we put it into the prescription, it extrapolates up and down, so we know exactly what the customer was swinging, and our build team builds it to those exact specs.
- 34:15SPEAKER_03: That's so cool.
- 34:16SPEAKER_04: Yeah.
- 34:17SPEAKER_01: I know, and why when I was there, when I was there last week with Brian, we we checked out the the lofts and lies on my irons, and they were comically, comically off.
- 34:26SPEAKER_01: Were they really?
- 34:27SPEAKER_01: They were they were bad.
- 34:28SPEAKER_04: Yeah, they were bad.
- 34:29SPEAKER_04: Right from the OER, right from the manufacturer.
- 34:31SPEAKER_04: Right from the manufacturer, and they were they were one week and were they more flat, one one one more flat than you than you asked, or I know they were one week through everything.
- 34:40SPEAKER_01: There were some that were kind of scattered a little bit, but we we ended up making them a little more upright.
- 34:47SPEAKER_01: Oh, interesting.
- 34:48SPEAKER_01: But yeah, I think one of them they were three flat instead of two flat.
- 34:51SPEAKER_01: The lofts were already some of them were weak.
- 34:54SPEAKER_01: Some of them were we left in the right specs because I bent them for you.
- 34:57SPEAKER_01: So that's that's a win.
- 34:59SPEAKER_01: Yeah, we did.
- 35:00SPEAKER_01: But actually, I was gonna I was gonna send you a uh a picture.
- 35:02SPEAKER_01: I was out hitting on the rap soda earlier, and I went and reviewed kind of the uh impact camera on it, and it's coming in right nice, and it's like perfectly flat.
- 35:12SPEAKER_01: And I was like, I gotta send a picture of Brian and be like, we got the line goes right on these right now.
- 35:16SPEAKER_04: Now we now we gotta get now we gotta get those uh those those 950 GH Neos in there so we can really get some height.
- 35:24SPEAKER_03: Oh I wanted to ask a question.
- 35:26SPEAKER_03: Actually, about uh Brian's fitting, because he he came he came back and he was telling us I mean, obviously he loves experience, and that's that's always like such a big part of it is the fitting when it goes well and you're like, oh my god, it actually helps.
- 35:38SPEAKER_03: Like that's that's my favorite thing is when you you have expectations of something and then the thing meets or expedes exceeds those expectations, it's it's almost like too good to be true.
- 35:48SPEAKER_03: It's fun.
- 35:49SPEAKER_03: So if you he's got lead tape all over those things, he's ruined them, as far as I'm concerned.
- 35:53SPEAKER_03: They're they're now uh they look like the new ping wedges.
- 35:57SPEAKER_03: Exactly.
- 35:58SPEAKER_03: That's exactly right.
- 36:00SPEAKER_03: I mean, they really do.
- 36:01SPEAKER_03: Um so good.
- 36:03SPEAKER_03: When you need to add weight to a head like that, how how?
- 36:08SPEAKER_03: Is it is it tip weights?
- 36:09SPEAKER_03: And if it is tip weights, don't the tip weights go in where the hazel is?
- 36:12SPEAKER_03: And isn't that putting the wrong part of the head?
- 36:15SPEAKER_04: Yeah, lead tape's more temporary or head help, I would say.
- 36:23SPEAKER_04: You know, more mass higher on the face to kind of bring flight down, like kind of a kind of a weather.
- 36:30SPEAKER_01: They're they're like, oh, I need to I've seen with do it with drivers too.
- 36:34SPEAKER_01: If like Ricky Fowler does it all the time.
- 36:36SPEAKER_01: Yeah, even though it's a little bit.
- 36:37SPEAKER_04: Even for instance, the the the club that Taylor made made for Tiger was an actual tungsten um disc put inside of the actual iron head to hit his windows.
- 36:48SPEAKER_04: Whoa.
- 36:49SPEAKER_00: Oh, that's it.
- 36:49SPEAKER_04: Yeah, so the normal the normal TPMBs and then the tiger, the TWs, are two completely different heads.
- 36:56SPEAKER_03: Oh wow.
- 36:58SPEAKER_03: Okay.
- 36:59SPEAKER_03: So so then for for somebody like Brian, if you're is the s the swing weight, that's the tip weight, that's for swing weight, but that's not necessarily for hitting a hitting a uh spot, a CG in the in the head or something.
- 37:11SPEAKER_03: That's more what lead tape is for?
- 37:12SPEAKER_04: Or is that yeah, lead tape doesn't kind of give you a temporary feel of where you want your club head to be.
- 37:18SPEAKER_04: But nine times out of ten when a club is being built and not the actual club head is being built, because there are some manufacturers where they have club heads where they have badges that they put in to change swing weight from the OEM.
- 37:31SPEAKER_04: Uh but most of the time it'll be tip weight, so either inside um the tip of the shaft and then it's installed, or to make something lighter, you take a reamer and you actually ream down the hausle more to take head mass out.
- 37:45SPEAKER_03: Oh, interesting.
- 37:46SPEAKER_04: So if you're playing in something lighter and you need that head to be lighter and you know you can't do anything but make a bigger, heavier grip on there to make the head lighter, uh, us at True Spec, what we'll do is we'll actually drill out the hausle a little bit down further with a smaller drill bit to take out a little bit of head mass.
- 38:05SPEAKER_04: And you've even seen sometimes where um on the extreme where you could potentially drill through the hausle and then put a tip cap, almost like a rubber or a plastic stopper in there.
- 38:18SPEAKER_04: If you remember the Calloway Calloway used to do that, was it Calloway?
- 38:21SPEAKER_04: Yeah, Callaway did that.
- 38:21SPEAKER_04: Callaway did that a lot, and then uh Taylor made did it on uh their wedges a few years back where you saw like a uh either a red or a or a black um plug on the heel, and that's just making the head lighter.
- 38:35SPEAKER_04: Interesting.
- 38:36SPEAKER_03: Okay.
- 38:36SPEAKER_03: Okay.
- 38:37SPEAKER_03: Oh, that's so cool.
- 38:38SPEAKER_01: But yeah, it w it was a wild experience.
- 38:41SPEAKER_01: We did not end up anywhere remotely close to what I was expecting, but we went, which was also the fun part because I was just like, Brian, like we try let's try what's the all the graphite shafts, and then I was like I have an idea.
- 38:57SPEAKER_04: Yeah, yeah.
- 38:58SPEAKER_04: Try this.
- 38:59SPEAKER_00: And it would just instantly higher launch, better spin.
- 39:03SPEAKER_01: So much better.
- 39:03SPEAKER_01: How's that feel, Bri?
- 39:04SPEAKER_00: It feels really good.
- 39:06SPEAKER_01: I might actually back a ball up on the green at Sand Valley, which would be kind of funny to see.
- 39:11SPEAKER_01: I'm gonna have to take that into consideration.
- 39:13SPEAKER_01: I need to see the ball mark and then where it landed.
- 39:16SPEAKER_01: Yes, yeah, exactly.
- 39:17SPEAKER_01: So we were able to with the the 950 GH Neos, um, I don't need six grams of lead tape to to feel where the head is.
- 39:26SPEAKER_01: Oh, that's great.
- 39:28SPEAKER_01: I I did not expect to end up in like a few grams lighter than what I was in now of anything.
- 39:32SPEAKER_01: I thought we'd end up being like into uh like the LZ 6.0, which is something that I've played before, or the MODIS uh 115, 120 range, thinking that I needed a little more weight in the shaft to counter it.
- 39:46SPEAKER_01: But nope.
- 39:47SPEAKER_01: Nope, we're gonna try the the 950.
- 39:49SPEAKER_04: Yeah, because Bri was in a 105 gram shaft and the Neo is a 98 gram shaft.
- 39:54SPEAKER_04: So taking weight out of the shaft, he felt the head more.
- 39:56SPEAKER_04: So by feeling the head more, there's you need less less lead tape.
- 40:00SPEAKER_04: Less.
- 40:00SPEAKER_04: Yeah.
- 40:01SPEAKER_04: Also, something that we he was hitting that he didn't realize until after I said it, the shaft that I was giving to him was actually the six iron at 37 and three quarters, which was a little longer, and he was middling the golf ball.
- 40:14SPEAKER_04: So screw you, Hayes.
- 40:18SPEAKER_00: Line always perfect.
- 40:20SPEAKER_04: So longer.
- 40:21SPEAKER_04: Slightly overlined.
- 40:22SPEAKER_04: He felt the headway because going longer, going lighter, you feel more head mass without actually throwing head tape on her.
- 40:29SPEAKER_01: Yeah, so that's actually the the only way plan is we're gonna try that.
- 40:32SPEAKER_01: And you know, if my strike suffers on the course, then it's easy to pop the grips off and just trim it back down to kind of standard.
- 40:39SPEAKER_01: But yeah, so that's gonna be that's gonna be where we're at.
- 40:42SPEAKER_01: Uh my ferals actually came in.
- 40:43SPEAKER_01: Yes, oh nice.
- 40:44SPEAKER_01: So absolutely love it.
- 40:45SPEAKER_01: I'll be I'll be dropping them off.
- 40:47SPEAKER_03: We'll need uh we'll need when when those are built up, we'll need a we'll need a couple of pictures.
- 40:51SPEAKER_03: I can I can throw them up.
- 40:52SPEAKER_04: I'll get some I'll get some pictures of them of them being built so you can you can do that too.
- 40:57SPEAKER_04: Yeah, perfect.
- 40:58SPEAKER_04: I love it.
- 40:58SPEAKER_03: Do you guys you guys build on site?
- 41:00SPEAKER_04: Uh I am actually going to be building them for Brian.
- 41:03SPEAKER_04: Get out.
- 41:04SPEAKER_04: That's awesome.
- 41:04SPEAKER_04: I've been also doing I've been also a club builder for the past 16 years.
- 41:08SPEAKER_03: Oh, super cool.
- 41:09SPEAKER_03: Okay.
- 41:10SPEAKER_03: Yep.
- 41:10SPEAKER_03: Yeah.
- 41:11SPEAKER_03: I've uh I've I've putzed around a little bit in my garage.
- 41:14SPEAKER_03: Um I I built some Maltbees uh just out of as an experiment.
- 41:18SPEAKER_03: And I I love them so much.
- 41:20SPEAKER_03: Um, this catalog was awesome.
- 41:24SPEAKER_03: Oh my God, it's so good.
- 41:25SPEAKER_03: I I still get the golf works catalog, and it's like it's like my it's it just sits by my bed and I just flip through it.
- 41:30SPEAKER_03: I'm like, oh look at those.
- 41:31SPEAKER_03: Those are nice, those are cool.
- 41:33SPEAKER_03: Um But uh do you guys do you guys do a grip fitting?
- 41:36SPEAKER_03: Do you guys is that part of uh fitting it all?
- 41:40SPEAKER_04: We can we have an air gun there that I have a you know an undersized grip, a standard, a mid-size, and a jumbo.
- 41:47SPEAKER_04: And I I will go to the extreme where if someone either has a hand ailments or catches mitts, um, I will be popping that standard grip off of our demos and putting a mid-size on every club that they swing or a jumbo on every club that they swing.
- 42:00SPEAKER_03: So they can actually feel and hit the golf club.
- 42:03SPEAKER_03: Have you so so there's there's some because I'm I play Jumbo Max, um I had done a and I I I love them so much.
- 42:09SPEAKER_03: I just they're I don't know, they just take my hands out of it.
- 42:12SPEAKER_03: However, I just recently read a thing that said when you go larger, it has a bit more of a fade bias um compared to a smaller grip.
- 42:22SPEAKER_03: So your hands are able to turn over a smaller grip a little bit easier than they would a larger grip.
- 42:27SPEAKER_03: Yes and no.
- 42:28SPEAKER_03: I don't know if that's yeah, exactly.
- 42:30SPEAKER_03: But the great thing is when I did my fitting, we went through extra small, uh standard, jumbo, then back into jumbo max, um the extra small, I think they they skip every two or something.
- 42:44SPEAKER_03: So it was extra small, and regular, and then but I gotta say, like that that extra, or that I think I'm in a small um, which is like a slightly bigger than a regular jumbo.
- 42:54SPEAKER_03: It's a baseball bat.
- 42:55SPEAKER_03: I mean it's it's hilariously big when you first feel it, it feels comical.
- 43:00SPEAKER_03: But my ball speed went up, my ball flight uh got better, like everything got better with that grip.
- 43:04SPEAKER_03: And then when we went too high, it like petered off the opposite way, and then we went too small, it went up the other way.
- 43:09SPEAKER_03: But it was a really cool experience.
- 43:11SPEAKER_03: I'd never done that before.
- 43:12SPEAKER_03: And um as a I just think that's a that's an interesting thing to be able to go through.
- 43:18SPEAKER_03: However, my miss with driver is right.
- 43:20SPEAKER_03: And so I'm wondering if I went back to like a mid-size, if that wouldn't help me turn it over just a tiny bit.
- 43:25SPEAKER_03: I also I have no idea.
- 43:26SPEAKER_04: So I've realized that a grip is gonna fit someone if they can hold on to the golf club.
- 43:33SPEAKER_04: If you can hold on to a big club, big grip, that's fine.
- 43:36SPEAKER_04: If you can hold on to a smaller one, that's fine.
- 43:38SPEAKER_04: The difference in closure rate from a standard to an oversized is six tenths of a second.
- 43:43SPEAKER_04: So if you can hold on to a club easier, relax your forearms, relax your hands, that's gonna allow the club to release easier.
- 43:51SPEAKER_04: If you're gripping it and you're trying to strangle it because you're swinging something smaller, it's gonna be tougher to release your hands.
- 44:00SPEAKER_04: Hands.
- 44:00SPEAKER_04: So going bigger will definitely have an effect of making you grip the club lighter and allow your hands to release easier.
- 44:10SPEAKER_04: So it does not necessarily always the case.
- 44:14SPEAKER_04: I would say it's something where the mainstream marketing does say bigger grips, tougher to close.
- 44:19SPEAKER_04: But it's golfer dependent, really.
- 44:22SPEAKER_04: Cool.
- 44:23SPEAKER_01: Yeah.
- 44:24SPEAKER_01: I think ultimately you find the right size one that's going to give you the most consistent.
- 44:28SPEAKER_01: Absolutely.
- 44:29SPEAKER_04: You know, something that fits in your fingers and doesn't go into the hand.
- 44:33SPEAKER_04: Um something where you're not overlapping, something that feels comfortable enough where you can hold on to it, but also, you know, not death grip it.
- 44:42SPEAKER_03: Yeah.
- 44:43SPEAKER_03: Well one of my favorite things about fitting in general is that it's always golfer specific.
- 44:48SPEAKER_03: Right.
- 44:49SPEAKER_03: There's never really the case where like, oh, I found the club for everybody.
- 44:53SPEAKER_03: Uh I mean, I I saw a guy, uh Brian, I was just pointing at you as if you could see me pointing at you.
- 44:58SPEAKER_03: Brian, uh the uh which Brian?
- 45:02SPEAKER_03: This Brian.
- 45:02SPEAKER_03: Which Brian?
- 45:05SPEAKER_03: Spider-Man meme.
- 45:06SPEAKER_03: Exactly.
- 45:08SPEAKER_03: Um But uh there was a guy who who uh went in for a fitting and his miss was a big blocky right miss.
- 45:15SPEAKER_03: Um not so much a slice, just a just a push right.
- 45:19SPEAKER_03: And he went in and he was trying all these drivers and he he got to the ping 440 uh max, not the 10k version, but the max version, yeah, just the max four model.
- 45:32SPEAKER_03: He couldn't miss a fairway.
- 45:33SPEAKER_03: It was unbelievable the difference between and everything was the same.
- 45:37SPEAKER_03: Just just the the head changed.
- 45:39SPEAKER_03: Right.
- 45:40SPEAKER_03: They were using the same shaft and the guy and then they kept going back and trying different things, like, hey, let's just make sure that this is the correct and every time he went back into the 440, and they even tried the K and he he pushed that one to the right, or he hooked that one or something.
- 45:54SPEAKER_03: But it was a it was an incredible thing to me to watch a golfer who has my effective ball flight find something that that allowed him to turn it over and keep it keep it dead straight, you know, get that face married up.
- 46:06SPEAKER_03: And it was such a cool it was such a cool fitting video to watch somebody really see an incredible gain in accuracy, not because everybody's always on about distance, distance, distance.
- 46:17SPEAKER_03: It's instant too just I I gotta say, you give me four more fairways around, you have a sale.
- 46:24SPEAKER_03: Like I I just that's what's gonna matter more at this point in my game is not playing from underneath a tree.
- 46:32SPEAKER_03: It's really annoying.
- 46:33SPEAKER_00: Uh playing on your actual fairway versus the other fairway?
- 46:38SPEAKER_01: Yeah, yeah.
- 46:39SPEAKER_01: Yeah, yours.
- 46:40SPEAKER_01: Speaking of hitting more fairways, speaking of hitting more fairways, right?
- 46:44SPEAKER_01: Uh sometimes, you know, we can't hit a driver off the T.
- 46:48SPEAKER_01: Are you seeing more fitting results into like uh high lofted fairway woods, the seven woods, the nine woods?
- 46:56SPEAKER_01: Is that something that you guys see and do?
- 46:58SPEAKER_01: I know we see it a lot on tour now, like Tommy Flea would add a nine wood wood in the bag.
- 47:03SPEAKER_04: I would say I would say the guys on tour can switch clubs at any given day.
- 47:09SPEAKER_04: There's no price range, there's no restriction of time frame when they get the clubs.
- 47:15SPEAKER_04: So putting a nine wood in a bag, he can have it for round one, he can take it out for round two, put it back for round three without breaking the bank, making his wife mad at him because he spent, you know, eight hundred dollars on a custom fitted nine wood.
- 47:28SPEAKER_04: On the other hand, yes, more high-lofted fairy woods are definitely starting to trickle in over hybrids because they are not draw bias.
- 47:38SPEAKER_04: Hybrids, hybrids are definitely want to go left for people where a fairy wood is gonna be a little more neutral and get the ball higher and a little bit easier to hit.
- 47:46SPEAKER_04: We still see hybrids taking over, you know, probably like the four, but when you get to the three, you know, throwing in a seven wood because they're you know, mostly, you know, around 19, 20 degrees, um, replacing the three nowadays, um, where the five wood is usually replacing the three back back when, eighteen, yeah.
- 48:07SPEAKER_04: Yeah, you know, you see a lot of you see a lot of hybrids ranging from eighteen to twenty.
- 48:11SPEAKER_04: So it depends on the bag setup too, on what loft gets thrown in there.
- 48:16SPEAKER_04: Um because uh regardless of what club it is, as long as it fills the gap in the bag, that's all that matters.
- 48:23SPEAKER_04: You know, it could be a 23 degree, you know, fairway wood or hybrid, as long as it goes the yardage that that golfer's looking for, that's that's all that matters.
- 48:30SPEAKER_04: It doesn't need to be, you know, a nine wood, a seven wood, a three hybrid, a four hybrid, a utility iron that's still kind of still active for those higher higher club speed guys.
- 48:41SPEAKER_04: Um but yeah, as long as it fills the gap for the carry number, that's all that matters.
- 48:45SPEAKER_01: Cool.
- 48:46SPEAKER_01: Yeah, I I actually I'm trying the the ping IDI in a four over the four hybrid just because I hate that hybrid shot that goes left.
- 48:58SPEAKER_01: I just I hate it.
- 48:59SPEAKER_01: Yeah.
- 49:00SPEAKER_01: And I already have the seven wood there, and that's been that's been a lot of fun.
- 49:04SPEAKER_01: That's a a really fun call.
- 49:05SPEAKER_01: And I bet they have almost identical loss too.
- 49:09SPEAKER_01: Yeah, like they're not far off, but they have two totally different flights.
- 49:13SPEAKER_01: Yeah.
- 49:13SPEAKER_01: Yeah.
- 49:14SPEAKER_03: I have a I have a driving iron that's an 18-degree driving iron, and it's it is on anything that's tight and you know you need like you can't go more than 250.
- 49:25SPEAKER_03: Because it it only it only flies like 200 yards, but then it rolls out and uh and it's awesome.
- 49:30SPEAKER_03: I mean it's but it is a completely different window from the five wood, which is also 18 degrees, but it's like a moon ball.
- 49:38SPEAKER_04: It's that's something that I'm experimenting this year.
- 49:40SPEAKER_04: I'm I'm putting a five wood in my bag for the first time in my life.
- 49:44SPEAKER_04: Nice.
- 49:45SPEAKER_04: I I experimented with a hybrid last year, and I proceeded to top it three times and snap hook it twice on the front nine at Marlboro Country Club.
- 49:56SPEAKER_04: And um at the turn, went to my car, opened my trunk, threw it in my trunk, pulled my 18 degree utility three iron, threw it in the back, and proceeded to shoot two over on the back.
- 50:08SPEAKER_04: So I was like, this is just a confident boost to know that the three or four times that I'm taking this club out on the back nine, yeah, I actually have something I can go straight.
- 50:17SPEAKER_04: But this year, that's actually five wood, and um I might be a believer.
- 50:21SPEAKER_04: I might be a believer.
- 50:22SPEAKER_04: I gotta take it out though.
- 50:23SPEAKER_04: But that's that that three utility will be in the trunk uh for the turn.
- 50:26SPEAKER_01: I'll take it that much.
- 50:27SPEAKER_01: The five wood was the first the first uh fairway wood that the speed zone five wood, and I had it opened up so it was more like a four.
- 50:36SPEAKER_01: Yeah, open four so it doesn't go left for you.
- 50:38SPEAKER_01: Yeah, there you go.
- 50:39SPEAKER_01: Exactly.
- 50:40SPEAKER_01: And that's the the ping woods are set up the same way.
- 50:42SPEAKER_04: Pings are a little bit flatter than most manufacturers too, so that helps too.
- 50:46SPEAKER_01: Oh, interesting.
- 50:47SPEAKER_01: I I just I don't get three woods off the ground, but the five wood was filling that same that same void for me.
- 50:54SPEAKER_01: But uh yeah, no, it's it's fun to have those clubs that you know, and I just want you to know with that story.
- 51:01SPEAKER_01: You're in great company here because we have friends that have brought full sets of clubs that they've changed over in between nines or in between rounds on golf trips.
- 51:11SPEAKER_01: So just doing it for one club is really bad.
- 51:14SPEAKER_03: Yeah.
- 51:14SPEAKER_03: We have we have a buddy, we have a buddy who was in was it Myrtle Beach where he did that?
- 51:17SPEAKER_03: Uh or it was Kings Mill.
- 51:19SPEAKER_03: We we he he played the front nine.
- 51:21SPEAKER_03: It might have been King's.
- 51:22SPEAKER_03: He played the front nine and he he said, I'll be right back at it the turn.
- 51:25SPEAKER_03: And then he came back and he had a completely different set of clubs.
- 51:29SPEAKER_03: Just I was like, where were those?
- 51:30SPEAKER_03: He goes, Oh, I I brought him with me.
- 51:32SPEAKER_03: I I wasn't playing well.
- 51:34SPEAKER_04: Is he is he is he local to the New England area?
- 51:36SPEAKER_04: Because I know a gentleman who could probably get him into one set of clubs.
- 51:41SPEAKER_01: No, I think he's Virginia-ish.
- 51:43SPEAKER_01: And uh yeah, he he likes he I think he enjoys having options, a plethora of options exactly.
- 51:51SPEAKER_05: Yeah.
- 51:51SPEAKER_05: Fair enough.
- 51:51SPEAKER_05: It's ultimately like he's there for the third set if you really want me to.
- 51:55SPEAKER_05: There you go.
- 51:56SPEAKER_05: Yeah, exactly.
- 51:57SPEAKER_05: He played in sixes.
- 51:59SPEAKER_03: Oh, it was great.
- 52:00SPEAKER_05: Yeah.
- 52:01SPEAKER_03: He was like, Yeah, the mirrors weren't working, so I went with the whatever he had.
- 52:04SPEAKER_03: I was like, the title is concept, you know.
- 52:06SPEAKER_03: I have to keep it high class.
- 52:07SPEAKER_03: My blueprints.
- 52:08SPEAKER_03: Yeah.
- 52:09SPEAKER_01: Yes.
- 52:09SPEAKER_01: Um All right, Brad, you got anything else?
- 52:12SPEAKER_01: Um I don't want to no, we kind of we kind of talked putting and everything like minidrivers.
- 52:17SPEAKER_03: Yes, thank you.
- 52:18SPEAKER_03: Oh, we could talk mini drivers.
- 52:19SPEAKER_03: I was just gonna go.
- 52:20SPEAKER_03: I was like, uh We had Scott Fawcett on uh a couple weeks ago, uh sort of in our in our drive-up to the masters.
- 52:30SPEAKER_03: Yep.
- 52:30SPEAKER_03: And you know, he he does decade and he's a but he's he's a big believer in like you have a driver for a fade, you have your mini driver for a draw.
- 52:39SPEAKER_03: And because he basically he his his thing is like how many times are you actually hitting three wood on the course?
- 52:45SPEAKER_03: If you're not hitting it more than once or twice, put a mini driver in the bag.
- 52:48SPEAKER_03: That's your draw setup, your driver's your fade setup for for most players.
- 52:53SPEAKER_03: Um and I think he's talking more of sort of a a relatively elite uh golf set.
- 52:57SPEAKER_03: Yeah, you're your single digits of scratch plus golfers.
- 53:01SPEAKER_03: Exactly.
- 53:02SPEAKER_03: So what's uh so mini drivers, I mean everybody has one.
- 53:05SPEAKER_03: Who's who who who wows you?
- 53:07SPEAKER_03: Like whose mini driver is like, oh this thing is a rocket.
- 53:10SPEAKER_04: I I I would say um the driver that for us outperformed mini driver outperformed every other mini driver um last year when it came out was Callaway.
- 53:24SPEAKER_04: Is that right?
- 53:24SPEAKER_04: Yep.
- 53:24SPEAKER_04: Yep, okay.
- 53:25SPEAKER_04: It it beat everything.
- 53:28SPEAKER_01: It beat everything.
- 53:29SPEAKER_01: Who has the the 15-degree one?
- 53:32SPEAKER_01: Is that the Taylor May?
- 53:33SPEAKER_01: The R7.
- 53:34SPEAKER_01: So that I think I'd have to try that one based off my flight dynamics.
- 53:39SPEAKER_01: The R7 pulls on my heart string because I wanted the super.
- 53:43SPEAKER_01: Everyone wanted a super bug.
- 53:44SPEAKER_01: Everybody wanted to be able to do that.
- 53:46SPEAKER_01: They did a great job.
- 53:47SPEAKER_04: Absolutely.
- 53:47SPEAKER_04: But I think the reason why the the Elite won last year and why it, you know, won so many fittings was because of it was basically literally a miniature Elite versus a completely different head style.
- 54:03SPEAKER_04: You know, it's it gave you the same head options, it gave you the adjustable weight.
- 54:08SPEAKER_04: Um it was also the biggest head out of the bunch.
- 54:14SPEAKER_04: So at True Spec, we had um the Seagull Weapon from PXG, we had the um the GT280 from Tireless, we had the R7 quad, and then we had the um Elite.
- 54:25SPEAKER_04: And you know, people who like that smaller profile, you know, was obviously loving the cat the titleist.
- 54:31SPEAKER_04: Um, but people who are just looking for just pure performance, Cal, we just it was a great driver.
- 54:37SPEAKER_04: It was a great, great, great driver.
- 54:39SPEAKER_04: But a lot of people come in and they'll talk mini driver and be like, I just can't hit my driver, so I I I I booked a driver fitting because I want to hit a mini driver.
- 54:48SPEAKER_04: That's not what a mini driver is.
- 54:49SPEAKER_04: A mini driver, we've been seeing people taking three wood out and putting a mini driver in.
- 54:55SPEAKER_04: That's right.
- 54:55SPEAKER_04: Because of the fact that a mini driver will give you a little more pop off the T than a three-wood.
- 54:59SPEAKER_04: It'll be a little bit more controllable, have a little more forgiveness, um, and it'll be that secondary option in the bag.
- 55:06SPEAKER_04: Where most of the time when we build someone's bag and a mini driver is an option, it's a low ball hitter.
- 55:13SPEAKER_04: So someone who is a low ball hitter, interesting, a three-wood and a five wood will pretty much carry the same.
- 55:19SPEAKER_04: You have more you have more ball speed, more ball speed on a three-wood, so it might roll out more, but they're pretty much carrying the same.
- 55:25SPEAKER_04: So when you're hitting them off a T, they're really not doing much difference.
- 55:29SPEAKER_04: It might be 10-yard difference, five to ten yard difference, and then the three wood will roll out more.
- 55:33SPEAKER_04: But you know, you you want carry, K.
- 55:35SPEAKER_04: It's all about carry.
- 55:36SPEAKER_04: So a mini driver will carry that 25 or 25, 30 yards difference on than the five wood, uh, but it won't get out there with the driver.
- 55:45SPEAKER_04: So it's that nice happy medium that you're seeing, yeah uh where, you know, off the deck, that five wood is what they need to elevate.
- 55:52SPEAKER_04: That's their fairway wood versus a three wood.
- 55:55SPEAKER_04: So the the mini driver can obviously be used off of the deck, but it's it's mainly their secondary option that they're removing a three wood and we're putting a mini driver in.
- 56:03SPEAKER_03: Um for somebody who uh repeatedly tops their three wood and um wants to uh break it in half, uh, mini driver sounds like a good option.
- 56:10SPEAKER_04: Um, I would say so.
- 56:12SPEAKER_04: Um it also depends too that it also depends too the type of swing that they have.
- 56:17SPEAKER_04: If they have a little bit more of a steep swing, um where you're hitting down on your fairway woods, uh a steeper faced fairy wood will be more helpful.
- 56:27SPEAKER_04: For example, Taylor Maid, tide list, cobra for the main for the main guys.
- 56:32SPEAKER_04: Okay.
- 56:33SPEAKER_04: If you're more of a sweeper, ping and callaway have a much shallower face, much sharper leading edge, which will actually help get the ball in the air a little bit easier and have more surface interaction.
- 56:44SPEAKER_04: So if you're someone who struggles getting the ball in the air and you love fairway woods, go to a shallower face fairway wood.
- 56:50SPEAKER_04: An example, Bri over here playing ping, um it's definitely something where getting the ball in the air a little bit easier is good.
- 56:58SPEAKER_04: I on the other hand, I'm a little bit steeper.
- 57:01SPEAKER_04: I am playing Callaway, but I'm playing the the triple diamond, which has a deeper face than the normal, you know, max D and Max.
- 57:08SPEAKER_04: So just gives you a little bit more, a little more surface for that steeper uh versus a little wider heel-to-toe for the shallower guys.
- 57:15SPEAKER_03: Cool.
- 57:16SPEAKER_03: All right, uh before we go, I just got one more.
- 57:18SPEAKER_03: Um there are a ton of DTC companies doing some really interesting things, um, mostly in the iron space, because I think it's a lot easier to break in there because you've got blanks in China, you've got all those different options that you can go to.
- 57:31SPEAKER_03: Um not a ton doing uh Fairway Wood Driver, although there are a few.
- 57:36SPEAKER_03: Vice is doing it.
- 57:37SPEAKER_03: Uh Vice.
- 57:37SPEAKER_03: Yeah, just came out with a good one.
- 57:38SPEAKER_03: Um Vice, I mean, by all accounts, they're doing some really, really exciting stuff.
- 57:44SPEAKER_03: Um got a great golf ball.
- 57:46SPEAKER_03: They do have a great golf ball.
- 57:47SPEAKER_03: I I love the Professor.
- 57:48SPEAKER_03: Got a great golf ball.
- 57:50SPEAKER_03: Yeah.
- 57:51SPEAKER_03: Um is there is there a DTC that you that you know of that you'd consider like, oh yeah, they're they're they're up there with the OEMs.
- 58:00SPEAKER_03: Do you do you uh do you have any knowledge of the DTCs?
- 58:02SPEAKER_03: Do you play around with those at all?
- 58:03SPEAKER_03: Like I mean, if you guys have heard of New Level, yeah.
- 58:08SPEAKER_04: Yeah, they're a DTC.
- 58:11SPEAKER_04: Yep.
- 58:11SPEAKER_04: We brought them on board in our in our fitting cart last year.
- 58:16SPEAKER_04: Yep.
- 58:16SPEAKER_04: That's really cool.
- 58:17SPEAKER_04: Their stuff is so.
- 58:19SPEAKER_04: We have the 702 plus, the C B and the MB that we put into our fitting matrix uh early 25.
- 58:25SPEAKER_04: Oh it's phenomenal.
- 58:27SPEAKER_04: It's a it's a great price point.
- 58:29SPEAKER_04: It's$149 a head.
- 58:31SPEAKER_04: Um it's it's it's way more forgiving than any other, you know, blade or C B of the size, with especially with the plus being a really long heel-to-toe.
- 58:42SPEAKER_04: Um and New Level did a great job with um accidentally stumbling upon the swing weight, toe weight.
- 58:49SPEAKER_04: Um if you look at the toe of a New Level 702, you'll see a tungsten plug on the end, kind of similar to um interesting.
- 58:56SPEAKER_04: The Ping I series, uh the blueprint, or even like the Shrixons that have that tungsten toe.
- 59:02SPEAKER_04: Yeah.
- 59:02SPEAKER_04: What they were doing was they were trying to make it uh the swing weight hit a certain point, and they found out that um adding that weight on a toe not only made the swing weight where they needed it to, but also made it a super stable, almost looking at it as a counterbalance heel-to-toe um blade, which is super, super stable for the toe striking golfer.
- 59:24SPEAKER_04: So cool.
- 59:25SPEAKER_04: Definitely something that um, you know, you know, I you know, Tacomo's doing a great job.
- 59:30SPEAKER_04: I've I've hit a few of them.
- 59:32SPEAKER_04: Um sub 70, um, did a little bit of an older thing.
- 59:35SPEAKER_03: Yeah, um, do you mess around with Heywood at all?
- 59:38SPEAKER_03: I haven't seen it at Heywood.
- 59:39SPEAKER_03: Okay.
- 59:40SPEAKER_03: Yeah.
- 59:40SPEAKER_03: Um there's I've I've seen their stuff, unfortunately.
- 59:43SPEAKER_03: I've never had a chance to hit it.
- 59:45SPEAKER_03: That's that's the downside of the DC is that you gotta really take a chance on something.
- 59:50SPEAKER_04: You you're paying the price of you know three to six hundred dollars for a set of irons.
- 59:55SPEAKER_04: It's if if you if you if you got the money to risk it for the looks and feel, it's worth it.
- 1:00:01SPEAKER_04: You know, just to kind of get something in your hands to st to start off your golf career.
- 1:00:05SPEAKER_04: It's you can pretty much you know get it and and not be afraid to get rid of it.
- 1:00:10SPEAKER_04: You know what I mean?
- 1:00:11SPEAKER_04: You know, even though they're they make a great product, you you're not ashamed of saying, Man, I just spent you know a couple thousand dollars on a set of irons.
- 1:00:17SPEAKER_04: It's like if I go to the store, I get a trade-in value of you know fifty percent.
- 1:00:21SPEAKER_04: Or I just spent six hundred bucks and you know, I can sell them for four hundred bucks online and you know you're only out two hundred dollars, you know what I mean?
- 1:00:28SPEAKER_01: So or or if you really like the heads, you can go see my Brian, my buddy Brian at True Spec in Boston and get a shaft retrofit.
- 1:00:36SPEAKER_00: I actually like I actually did that for a for a buddy for a buddy of mine.
- 1:00:40SPEAKER_04: You know, he had uh he had a Tacomos um and we we retrofitted them and you know we're we're gonna we're gonna get those you go re reshafted.
- 1:00:48SPEAKER_04: So that's great.
- 1:00:49SPEAKER_04: Yep.
- 1:00:49SPEAKER_03: So that's so great.
- 1:00:50SPEAKER_03: All right.
- 1:00:51SPEAKER_03: So um how do people find you?
- 1:00:52SPEAKER_03: How do people uh I mean I know true spec is is nationwide at this point, but it's just true specgolf.com.
- 1:00:58SPEAKER_04: Um you'll be able to see um myself and uh Cody's uh fitting schedules.
- 1:01:03SPEAKER_04: Um you'll be able to you know select, mirror him, and also see, you know, based on what style of fitting that you that you that you want, you know, you see what windows that we have and you'll be able to choose either one of us.
- 1:01:14SPEAKER_04: We work pretty much back to back, you know.
- 1:01:16SPEAKER_04: So if you if you book me, if you book him, we'll we'll probably both like we'll both be there.
- 1:01:21unknown: Cool.
- 1:01:22SPEAKER_04: Yeah, it's actually it's really cool.
- 1:01:23SPEAKER_03: They got like two, two dueling bases, like they're do just just like and and Brian, do you do you recommend that people do like is there a recommendation of like it's worth it to do the full bag fit?
- 1:01:34SPEAKER_03: Like I did a full bag fit just for fun, like it was a Christmas present for my for my family.
- 1:01:38SPEAKER_03: Absolutely.
- 1:01:39SPEAKER_03: And I didn't need a putter and I didn't need wedges.
- 1:01:41SPEAKER_03: So we focused all of that time on irons and and woods and drivers.
- 1:01:45SPEAKER_04: And it was I would I would say, I would say if there's if there's no promo codes out there and you're trying to eventually replace the full bag, get a full bag fitting.
- 1:01:55SPEAKER_04: It's better for the bang for the buck.
- 1:01:56SPEAKER_04: The fitting price is a lot is a lot more reasonable than doing a driver fitting in May, doing an iron fitting in June, doing a you know woods, you know, woods and wedge fitting in in December.
- 1:02:07SPEAKER_04: It's you know, so just just doing the full bag, going through what you can get done that day, and then we could always do a follow-up, you know, split it in two, you know, there's no rush.
- 1:02:16SPEAKER_04: You know, we're focusing one-on-one, you know, for you if we want to look at irons and wedges on day one, and then do a follow-up if you get tired or you know, you have an injury or whatever the case may be.
- 1:02:26SPEAKER_04: There's no pressure.
- 1:02:27SPEAKER_04: There's no pressure at all.
- 1:02:28SPEAKER_03: Cool.
- 1:02:29SPEAKER_03: And actually, I I just thought of one more question.
- 1:02:31SPEAKER_03: Um, when somebody comes in and says, here's my budget, how much does that help you as opposed to because when I went, it was just for fun.
- 1:02:39SPEAKER_03: So I literally was like, I'll hit whatever you think I should hit.
- 1:02:41SPEAKER_03: So if that's the AutoFlex, throw it in there.
- 1:02:44SPEAKER_03: Like the I'm not buying today.
- 1:02:45SPEAKER_03: That's not why I'm here.
- 1:02:46SPEAKER_03: I'm here for the experience.
- 1:02:47SPEAKER_03: And I I was I was as upfront as I could be.
- 1:02:50SPEAKER_03: I mean, I even emailed it to him ahead of time.
- 1:02:52SPEAKER_03: Like, I just want it, I want you to know, please don't get mad at me.
- 1:02:55SPEAKER_03: I'm not buying, that's not why I'm here today.
- 1:02:56SPEAKER_03: But actually, it it freed up the thing.
- 1:02:58SPEAKER_03: It was so fun.
- 1:02:59SPEAKER_03: We just sat around and talked about hit bulk golf ball set.
- 1:03:02SPEAKER_03: It was a really cool experience.
- 1:03:04SPEAKER_04: That conversation is is very touchy.
- 1:03:07SPEAKER_04: You know, money's very personal to people, and you know, i it's tough to let it go, you know.
- 1:03:13SPEAKER_04: But when you look at golf clubs, they are an investment in your golf game.
- 1:03:17SPEAKER_04: You're looking to have them for anywhere from five to ten years for most people.
- 1:03:20SPEAKER_04: Unless you just want something new and shiny every other year, then you know, it is.
- 1:03:24SPEAKER_03: Unless you're one of our friends like Ben or Mark or yeah, yeah.
- 1:03:27SPEAKER_04: You know, what what what we'll do usually um we we won't talk pricing, we won't talk budget at the beginning.
- 1:03:34SPEAKER_04: We'll say what are we looking for, what are the weaknesses, and everything like that.
- 1:03:37SPEAKER_04: And then once we go through the full fitting and get everything taken care of, then it comes down to this is your investment, this is what we have for a quote, then budget gets brought up.
- 1:03:46SPEAKER_04: You know, usually sometimes they'll say, Oh man, I was trying to look to stay, you know, you know, under 3,000 or under 4,000.
- 1:03:53SPEAKER_04: And my recommendation to that is where is it most needed in the bag?
- 1:03:58SPEAKER_04: Is it irons?
- 1:03:59SPEAKER_04: Is it a driver?
- 1:04:00SPEAKER_04: Uh because if so, let's get that replaced and look at the rest of the stuff later on when the budget is more friendly again.
- 1:04:08SPEAKER_04: Whether it's uh a gift, a birthday, a Christmas, or some type of holiday present.
- 1:04:13SPEAKER_04: Um promotions are always being done.
- 1:04:16SPEAKER_04: Um, so there's always ways to save save money when you're looking at purchasing stuff.
- 1:04:22SPEAKER_04: Um but yeah, usually budget is more along the lines for us is like, let's find what we fit you today that fits your budget.
- 1:04:30SPEAKER_04: You know, if it's the irons and wedges that fit your budget, let's replace those, let's get those going.
- 1:04:34SPEAKER_04: If that's where the strength of your game wants to be because those are currently your weakest, then that's who we should go with.
- 1:04:41SPEAKER_04: Got it.
- 1:04:42SPEAKER_03: Cool.
- 1:04:43SPEAKER_03: Very cool.
- 1:04:43SPEAKER_03: Oh, I love it.
- 1:04:44SPEAKER_03: Uh Brian, we mean you might need to bring back uh this was awesome.
- 1:04:48SPEAKER_03: And uh I am literally to come back.
- 1:04:51SPEAKER_03: There are like three more hours worth of questions I could ask you.
- 1:04:53SPEAKER_03: So I'm like, uh let's crap it at an hour.
- 1:04:56SPEAKER_03: Perfect.
- 1:04:57SPEAKER_04: Uh absolutely.
- 1:04:57SPEAKER_04: We can we can we can figure out another another Sunday that we can do this.
- 1:05:01SPEAKER_04: Yeah, we'll we'll do a follow-up after after mine are built and we'll figure out how uh how well we did things.
- 1:05:06SPEAKER_01: Absolutely cool.
- 1:05:07SPEAKER_01: I didn't bring my best swing to him, so it was uh it was kind of an interesting.
- 1:05:12SPEAKER_01: We did have some success with that with that 950 though.
- 1:05:14SPEAKER_04: That was that was kind of surprising because it wasn't something that I was gonna grab in the first place.
- 1:05:20SPEAKER_04: And then I was like, these graphite chassis aren't working.
- 1:05:23SPEAKER_04: I need to give you some lightweight high launching steel.
- 1:05:25SPEAKER_04: And the ones that we fit you to were the 950 GH, and then obviously reading on the manufacturer's website that they present a couple degrees higher loft and everything about that just screwed just screamed like the Neos are supposed to be a little more tip stiff, give a little more stability, but also increase the launch.
- 1:05:45SPEAKER_01: Let's try those ones.
- 1:05:46SPEAKER_01: Yeah.
- 1:05:46SPEAKER_01: Let's get the check.
- 1:05:48SPEAKER_04: Yep.
- 1:05:48SPEAKER_04: Absolutely.
- 1:05:48SPEAKER_04: Yep.
- 1:05:49SPEAKER_04: Absolutely.
- 1:05:50SPEAKER_04: But no, I'd have to be happy to come back and finish up the rest of uh talking about the the bag going down.
- 1:05:56SPEAKER_04: Oh, I love it.
- 1:05:57SPEAKER_03: Sounds great.
- 1:05:58SPEAKER_03: Um thank you guys.
- 1:05:59SPEAKER_03: Brian, really, thank you for joining us.
- 1:06:00SPEAKER_03: This was awesome and uh so much information.
- 1:06:03SPEAKER_03: So um thank you everybody.
- 1:06:05SPEAKER_03: We will see you guys uh I don't know, next week probably.
- 1:06:08SPEAKER_03: I think Hayes is back.
- 1:06:09SPEAKER_03: So you know he'll he'll he'll um he'll get mad at me for uh you know for for not uh for not letting him hit a cycle.
- 1:06:16SPEAKER_01: I wasn't even thinking that Brian was you know was a PXG guy at one point.
- 1:06:20SPEAKER_01: Hayes would have been all on board.
- 1:06:22SPEAKER_01: He is like he is like full, full PX.
- 1:06:25SPEAKER_01: PXG does it full.
- 1:06:26SPEAKER_01: PX PXG does a great job fitting PXG stuff.
- 1:06:30SPEAKER_03: Yeah.
- 1:06:30SPEAKER_03: Yeah.
- 1:06:31SPEAKER_03: Yeah.
- 1:06:31SPEAKER_03: I mean I my favorite thing about their irons is is the is the weights on the in the swing weights then and there, yes.
- 1:06:38SPEAKER_00: It's rad.
- 1:06:40SPEAKER_04: I will say that is something that they have innovative to them that if other manufacturers implemented it would be a lot more helpful for fitters to dial and swing weight.
- 1:06:50SPEAKER_04: I imagine that would be amazing.
- 1:06:52SPEAKER_04: Yeah.
- 1:06:52SPEAKER_04: Yeah.
- 1:06:53SPEAKER_03: Yeah.
- 1:06:54SPEAKER_03: All right.
- 1:06:54SPEAKER_03: Well, um thank you, everybody.
- 1:06:56SPEAKER_03: We will see you uh see you again next week.
- 1:06:58SPEAKER_03: All right.
- 1:06:58SPEAKER_03: Thanks, guys.
- 1:06:58SPEAKER_03: Bye.
- 1:06:59SPEAKER_03: See you guys.
- 1:07:00SPEAKER_03: All right, that was Brian Galino from True Spec.
- 1:07:03SPEAKER_03: Um, Brian, if I'm mispronouncing your last name, I apologize.
- 1:07:07SPEAKER_03: Uh it looks like Galino to me, but also I'm not Italian, so it could be Giolino or something cool like that.
- 1:07:13SPEAKER_03: Anyway, thank you for listening.
- 1:07:15SPEAKER_03: Uh if you want to find out more, you can go to True Spec's website.
- 1:07:18SPEAKER_03: Uh, it's true specgolf.com.
- 1:07:20SPEAKER_03: As always, you can email us at bogeyballsociety at gmail.com.
- 1:07:24SPEAKER_03: You can come find us at life at the turn.
- 1:07:26SPEAKER_03: You can uh send some smoke signals, maybe some fireworks.
- 1:07:29SPEAKER_03: It's that time of year.
- 1:07:30SPEAKER_03: Uh we'll probably find you.
- 1:07:31SPEAKER_03: Anyway, uh, see you guys next week.
- 1:07:33SPEAKER_03: Talk too soon.
- 1:07:34SPEAKER_03: Bye.