Latest / The MEND Fly Fishing Podcast / Episode 91 - Fly Lines Matter with Chris Walker of RIO
Transcript
- 0:00All right, everybody. Welcome to the Mend Podcast. This is your host,
- 0:03Joe Roeder, coming at you with an ad-free, clickbait-free podcast experience.
- 0:11I think podcasts are the last places you don't get smutty clickbait all over
- 0:15the place distracting you.
- 0:16So thanks for listening. A couple things.
- 0:19Just got back from Texas. If you didn't listen to the Texas Redfish Podcast,
- 0:23go back and listen to that. I think even if you're not redfish fishing,
- 0:27we're super excited about that trip and that fishery.
- 0:30And so if you're new to the podcast, go back and that Texas one's pretty authentic.
- 0:34We actually recorded it on site, which is super great.
- 0:37And then we get a bunch of weeks for hosted redfish trips coming up this spring.
- 0:42Other than that, our travel for 2026 pretty well sold out.
- 0:46So anyway, that's the only headliner that I've got for you today.
- 0:51On the podcast today, we're going to talk a lot about fly lines.
- 0:54Getting fly lines matched to not only your rod, but your fishing situation.
- 1:01I'm thrilled to have Chris Walker from Real Products on the podcast today.
- 1:07I think you're going to learn a ton, as I'm looking forward to learning a ton
- 1:10and helping not only match my rods up better for my fishing scenarios,
- 1:15but helping people invest in the right line for their fishing scenario.
- 1:21Welcome to the podcast, Chris Walker.
- 1:25Thanks for having me on, Joe. It's great to be here. Yeah, so where are you at right now, Chris?
- 1:31I am sitting in our illustrious conference room here at Rio World Headquarters in Idaho Falls, Idaho.
- 1:38You know, I've been visiting Rio World Global Headquarters.
- 1:45It's been on my list for a long time. But every time I visited,
- 1:48you know, one of the manufacturers, whether it's been, you know,
- 1:52Sage or Winston, I'll exclude Loomis because they make a lot of other stuff
- 1:56there as far as tackle rods.
- 1:57But every fly fishing manufacturer has always been way smaller and way more
- 2:02humble than I anticipate it being.
- 2:06Yeah, I'm sure that's no different here. It's not much to look at when you drive by.
- 2:10It's a couple of cinder block buildings on the side of the highway in eastern
- 2:13Idaho, but we do make every Rio fly line in these two buildings.
- 2:18So super cool manufacturing, small factory, but something that's near and dear to my heart, certainly.
- 2:24Yeah, I mean, it's pretty astounding. These high-tech products,
- 2:29they're distributed all over the world or built right there in Idaho.
- 2:33How long has Rio been in Idaho Falls there?
- 2:39I'm trying to think. I think mid-90s is when we kind of moved into this facility.
- 2:44So Jim Vincent started the company in the early 90s. Initially,
- 2:48it was just a couple of fly fishing accessories, like a strap to hold your tippet
- 2:52on the spool and some waterproof notebooks, that kind of thing.
- 2:55At the time, he was in Blackfoot, Idaho, which is just about 25, 30 miles south of here.
- 3:01But then, yeah, he got a lease on the building I'm sitting in today.
- 3:05Soon after that, started building up equipment to make fly lines.
- 3:09And the company's just been growing and evolving ever since.
- 3:12Yeah. And so how far you get now? The South Fork of the Snake is kind of your home water, right?
- 3:17Yep, South Fork and Henry's Fork both. Yeah, how far are you from the nearest
- 3:21boat launch on the South Fork?
- 3:23Just about 30 minutes, which is great.
- 3:27That's part of the reason the company is where it is, is that Jim himself was
- 3:30a fishing bum and a guide in the area for many years.
- 3:34And yeah, it's still central to what we do is the great fishing we've got in our backyards.
- 3:39Yeah, not in your backyard, but not as in the backyard as I am.
- 3:42I'm literally looking at the river right now, and, dude, it is in such good shape.
- 3:48We had – did you see all the flooding events stuff that we had in Washington here a few weeks ago?
- 3:53I did. It looked like a mess. Dude, it was crazy.
- 3:57You know, we didn't – you know, we're on the river here, but we're pretty high.
- 4:02You know, we're close in proximity, but we got a fairly high bank.
- 4:05And so we were all fine, you know, here. But some of the areas in Washington got pretty smashed.
- 4:12But the river dropped back into beautiful condition and we're having this kind
- 4:16of mild weather pattern right now.
- 4:18It is fishy as can be right now.
- 4:21Really, really great winter conditions. I wish I was out. But I actually set
- 4:25this podcast up during our annual physical inventory count.
- 4:30So we have like 18 people here today and we count every single thing in the
- 4:35store over the course of two days.
- 4:36And I'm actually snuck out to do this.
- 4:41What's the strategy there I'm sure that's not the favorite day of work for anybody,
- 4:46you know what the hardest department is leaders and tippets holy smokes that's
- 4:52a lot of small skews that's kind of mind numbing but what's funny about inventory Chris is like,
- 4:58You have to physically go examine every product in the store.
- 5:02You know, we break up into teams, right, in pairs, but we physically inventory things.
- 5:07And so the staff has to put eyes on every single physical product that we sell.
- 5:12And you learn a ton about what we've got because you're sitting there reading
- 5:16boxes, you know, like you're having to read, use, look at products.
- 5:20So it's a pretty good exercise in general.
- 5:23But, yeah, I snuck away from inventory. But I think I want to kick the podcast
- 5:27off with just a little speed round.
- 5:30And then I want to get to know you and I got some other more technical questions.
- 5:33But we're going to play a little game, man.
- 5:36So I'm going to name a fishing scenario and destination.
- 5:41And you're going to spit back at me the fly line that you would recommend for that scenario.
- 5:47And just a little bit about why. All right. Are you ready for this?
- 5:51Love it. I'm ready. It's a lot of pressure. All right. So you're going dry fly
- 5:55fishing on the south fork of the snake with the five weight.
- 5:59Easy. Technical trout, the elite technical trout, five weight, weight forward.
- 6:05Absolutely love that line with a small dry fly. It's got a really long light
- 6:09front taper, so you get beautiful, delicate presentation.
- 6:12It's also right at the aft of standard, so it's not going to overload your rod
- 6:16if you're fishing a more moderate action rod, which is kind of my preferred
- 6:20rig. If I'm going to be fishing a single small dry fly.
- 6:23So one of my absolute favorites, technical trout. Yeah, okay,
- 6:26we're aligned right there. That was my answer too.
- 6:31Yeah, so okay, the next one, you're going permit fishing in Espiritu Santo Bay in Mexico.
- 6:38Ooh, I'm going to actually give you an A and a B on this one.
- 6:43If the weather is beautiful, I want the Elite Permit line.
- 6:47It's got a really nice long head so you can pick up a lot of line off the water
- 6:51and reposition a cast if a fish changes direction, which I almost always do.
- 6:55If the wind's blowing a little harder, I prefer the Flats Pro,
- 6:58actually. It's just a little bit heavier at a full line size heavy.
- 7:01It's got a little bit more powerful front taper for turning over a long leader
- 7:05or a heavy crab fly into a breeze. So those would be the two I'd have with me.
- 7:10If I had to take just one, I would probably take the Flats Pro just because
- 7:14it's better in sort of every condition.
- 7:16Permit line's the best if you've got one of those slick, calm days.
- 7:20Again, we're aligned on that.
- 7:22And the only reason I said Flats Pro is just because I'm so familiar with it.
- 7:26I haven't fished the permit line. But I like what you said about the pickup and laydown.
- 7:31We're going to talk about head length on fly lines and kind of what that...
- 7:35A lot of people talk about head length, but you just pointed out something that
- 7:39I think I knew inherently just from experience,
- 7:41but I wouldn't have been able to verbally articulate that that pick up and lay
- 7:45down is a lot more accurate with a slightly longer head,
- 7:50assuming you can get everything up out of the water and arealized.
- 7:54But yeah, that recycle with no false cast would be more accurate with that longer, more even head.
- 8:00Makes sense. Okay, you're going to, let's just say, Central Idaho Streams,
- 8:07you're fishing hopper droppers on foot.
- 8:10Ooh, small streams, are we talking? Or digger streams? You can wade across them.
- 8:17Wade across them. Okay. In that case, I'd probably take a gold XP.
- 8:21That's a good sort of all-around fly line. We really, when we were designing
- 8:25that one, we kind of sighted it in around sort of a hopper-dropper rig being
- 8:30sort of the approximate size and weight of what you're trying to deliver.
- 8:35I really like that line because it's got enough oomph to kick over a couple
- 8:38of flies, especially if one of them is a more wind-resistant hopper.
- 8:42But it's also got a long enough head, like we were just talking about,
- 8:45being able to pick up a little bit more line, carry a little bit more line to
- 8:48put down an accurate cast.
- 8:50I think the gold XP strikes a really nice balance there.
- 8:54Okay, we're going to go back to your roots here for a bit. At least I think
- 8:59these are your roots, based on what I know about you.
- 9:02We're going brook trout fishing. Back East.
- 9:06Yeah. Okay, great. This brings in the small stream aspect.
- 9:09So for that, the creek line, it's hard to beat. The creek line I really like
- 9:13because it's got, well, it's a compact line in itself. If you're fishing small
- 9:17streams, you're not going to be making long casts.
- 9:19So the line itself is actually a little shorter, but the head in particular
- 9:23is pretty short. It's only 30 feet.
- 9:25In my experience, if you're brook trout fishing, that covers kind of all your
- 9:30bases. You're not going to have to carry more than 30 feet of line ever to fish for those fish.
- 9:34But what makes the line really interesting to me is it's a full-size heavy,
- 9:38which actually I think makes a lot of sense on those small rods you use,
- 9:41like twos and three weights.
- 9:43And that's because the rod gets lighter because the fish are smaller,
- 9:46but the flies you're trying to turn over are not necessarily any smaller.
- 9:50So having a little extra power in your fly line, one size heavy,
- 9:54that helps you turn over some of those bigger, bushier attractor patterns on
- 9:58even smaller rods, essentially.
- 10:01Yeah, that 15-foot cast, you know, we fish a lot of small streams.
- 10:05We have a few brook trout fisheries here, but mostly West Slope cutthroat.
- 10:10And that 15-foot cast, you know, with good line speed and accurate delivery
- 10:15can be a little evasive if you have one of those longer traditional heads.
- 10:20I like that creek line. I mean, it's a little point-and-shoot thing.
- 10:23It's like a laser pointer on those small. Yeah, that's exactly right.
- 10:26It's all about making that short cast more comfortable. So a little more weight
- 10:30up front helps you bend that rod on those really tight, you know,
- 10:34tight quarters conditions.
- 10:36Yeah. So where now you're I didn't I didn't know this until I was just told
- 10:41recently, but you're not from originally from Idaho.
- 10:44No, that's right. I actually grew up in central New York, a little town called
- 10:49Corning, New York. That's kind of where I cut my teeth fly fishing.
- 10:52I started off on warm water species. There's a great smallmouth fishery.
- 10:57It's a tributary of the Susquehanna that runs right through my hometown.
- 11:01So smallmouth bass, bluegill, largemouth bass, and ponds, that's really where I got started.
- 11:07Then I moved on to some small stream trout fishing.
- 11:11And actually what really got me hoarsed about fly fishing initially was the
- 11:16carp fishing in that river.
- 11:18So it's the Chemung River is the name of it. It's full of crawdads.
- 11:22The carp are carnivores there. You can spot them from a ways off if it's running clear.
- 11:27Yeah, that was sort of my first sight fishing experience and got me really,
- 11:30really amped on fly fishing in general.
- 11:33And yeah, since then, I've done all kinds of stuff. I lived in North Carolina
- 11:37for a few years, fished for redfish and fall salivacore on the coast.
- 11:41Like you mentioned, brook trout up in the mountains in the Smokies a little bit.
- 11:44And then, of course, since then, I moved out to Idaho. I've been in eastern
- 11:47Idaho for eight years now where, you know, we're just spoiled for choice on our trout fisheries.
- 11:52Yeah. So how did you wind up at Rio? I was kind of in the right place at the
- 11:57right time. So my background is engineering. I've got a degree in material science engineering.
- 12:03When I first started applying at Rio, I was working for a semiconductor manufacturing
- 12:08company in Durham, North Carolina.
- 12:11And essentially i i decided that was like higher
- 12:14stress than i i really wanted to be signed up
- 12:16for and it wasn't something i was passionate about so i
- 12:19started to get creative and looking around for different jobs that
- 12:22had to do with fishing and really it just
- 12:25kind of i got lucky i found a posting for a
- 12:28product development job in idaho falls at
- 12:31rio applied for that flew out interviewed the first question i got asked in
- 12:36the interview actually was to take a fly rod out into the parking lot put it
- 12:39together and cast a little bit you know they wanted to make sure I actually
- 12:42did fish and I wasn't just you know looking for a job in the outdoor industry
- 12:46I love that I've seen who who at that time interviewed you.
- 12:51So that was Marlon Roush, who was the previous director of product development.
- 12:55And that's your title now, Chris, is director of product development? Yep, that's right.
- 13:01Ah, excellent, man. I love that. You know, you're an engineer.
- 13:05If you come out to interview in Idaho, and the first thing is they're like,
- 13:10let's just cut the BS right now.
- 13:12Can this guy actually throw a line?
- 13:16Exactly. Were you kind of nervous?
- 13:20I was a little bit, yeah. I mean, I showed up in like an interview suit and
- 13:24it was immediately like, all right, out to the parking lot.
- 13:27And actually, since the interview, I got a look behind the scenes once I got hired on.
- 13:32And actually, one of the things they were watching closely was how you put a rod together.
- 13:36Because you can actually tell a lot about how much a person fishes by,
- 13:40you know, where do they start putting the rod together?
- 13:42How do they string it up? Do they, you know, are they passing tippet through
- 13:45every guide and then you drop it and it falls all the way down to the reel?
- 13:48Or you're doubling the line over and stringing it up.
- 13:52Fortunately, I was kind of a degenerate weekend fisherman at that time anyway,
- 13:55so that part was easy for me.
- 13:57Yeah, yeah, yeah, I get it, man. On this podcast, we talk all the time.
- 14:03The podcast, man, I'll tell you, the heart of the men podcast,
- 14:07the reason we came up with that name, it was like we wanted to fix and help.
- 14:11That was it. We're like, you know what?
- 14:14There's lots of different things you can do in business to generate,
- 14:17you know, following or get to know people and stuff.
- 14:20But genuinely, we want to help anglers, you know, find solutions or get better.
- 14:26And we're like, yeah, we should call it the mend.
- 14:29And we use the term weekend warrior, like, endearingly on this podcast.
- 14:33That is like a good podcast for men is that person that, you know, probably got a job.
- 14:40And I assume they're employed and if they're buying fly fishing gear,
- 14:42Maybe they got some kids and they've just got that one Saturday or Sunday afternoon
- 14:47or Wednesday night after work
- 14:48to just get out and make the most of those precious hours on the water.
- 14:53Yes, I love that, the degenerative weekend warrior, just scrapping opportunities
- 15:01together to go catch whatever you can at whatever precious time you have off.
- 15:05So you go through this interview process.
- 15:08They're scrutinizing over your body language as you put this rod together.
- 15:14And then, obviously, you cast a little bit.
- 15:17You're fishing a ton. I'm sure you got, at that time, you had plenty of skills.
- 15:21But you obviously got hired.
- 15:24Yeah, it worked out in the end. I must have said all the right things. That was great.
- 15:29Yeah, one of the questions in the interview was about what would you do?
- 15:33How would you test a new fly line before going to market?
- 15:36How would you figure out what the market needs?
- 15:38It's always hard to tell at the time but that is sort of exactly what my job
- 15:42is now is figuring out what are we missing? Where are the holes in our catalog?
- 15:47What can we do better? How do we keep progressing the sport of fly fishing?
- 15:51By offering anglers gear that really works in a practical way.
- 15:56Yeah, so it's been awesome. I've been there a little over eight years now and
- 16:01loving every minute of it.
- 16:03Yeah, so what would you say at this point is more valuable?
- 16:08This extensive fly fishing knowledge you've got, you're obviously super passionate
- 16:12about fly or your engineering.
- 16:14That's a good question, and it probably varies day to day.
- 16:18There certainly are times when we're solving technical engineering issues,
- 16:23you know, some piece of equipment goes down or you're trying to develop a new
- 16:26process that, you know, makes a fly line that's consistent and affordable.
- 16:33But, you know, if I had to pick one, I probably would say it's the fishing skills
- 16:38and the fishing knowledge.
- 16:39Just a whole lot of it is based on, you know, you can call it market research,
- 16:43but really what it is, is like fishing in a bunch of different places and figuring
- 16:47out what works, you know, what different techniques are out there,
- 16:51what a fly line needs to do to enable each of those techniques.
- 16:54I would say I really leaned on those skills more in the last eight years than
- 16:58the technical engineering side.
- 17:00Yeah, the engineering probably gives you the ability to solve problems.
- 17:03Once they arise in testing, you know, or accomplish something like flotation
- 17:07or sync rate or memory, durability, and so on and so forth.
- 17:12But you have to know what the problems are at the beat, you know. Absolutely.
- 17:16Yeah. And we do have a diverse team. I'm really fortunate to work with people
- 17:20with a wide range of backgrounds.
- 17:22So we've got an equipment engineer now who's really, really good at troubleshooting
- 17:28equipment, building new equipment, really digging into some of those technical issues.
- 17:32Got another product designer in the building, Wayne Peterson.
- 17:35I don't know if you've met Wayne before, but he's another fishing nut and has
- 17:39just kind of, you know, been in the industry for a long time.
- 17:42Knows how to get stuff done. Knows how to make a good fly line. That's been great.
- 17:47Yeah. So obviously the process is incredibly technical.
- 17:52As I understand fly lines are incredibly difficult to make.
- 17:56And then I've got a couple of questions about just line construction things that we'll follow up on.
- 18:01But if you could give us kind of a summary, like if somebody was to walk into
- 18:05the real facility there in Idaho Falls and see fly lines get made,
- 18:11what are they most surprised about and what does that look like?
- 18:15How is a fly line, in short, how is a fly line made?
- 18:21Yeah, it's a great question, and you're right on. It is a technical process for sure.
- 18:25So I know when I first walked into the factory, that was part of my interview,
- 18:29was a factory tour. I had the most basic idea of how a fly line is made.
- 18:33Essentially, the longest standing process and the one that's most common today
- 18:37is you start with a bare core, and it runs vertically up into an oven, essentially.
- 18:44Before it gets to the oven, you apply a liquid coating. The oven is elevated.
- 18:49Yeah, the oven is kind of vertical. So it's a, yeah, it stands up in the middle
- 18:53of the oven room, as we call it.
- 18:56Essentially, the core, though, it starts at the bottom and it runs upwards into the oven.
- 19:00Before it gets into the oven, we put a liquid plastisol on it.
- 19:04And then essentially, it's going through an orifice that sets the diameter of that plastisol.
- 19:09So you're changing the diameter by basically changing the size of the hole that
- 19:13the core is going through.
- 19:15You're scraping off excess plastisol and that's
- 19:18how you actually set the diameter of the fly line and then
- 19:21the purpose of the oven is to cure the plastisol
- 19:25so it heats up plastisol solidifies
- 19:29then we of course cool it down wind it up on a big spool and that's how you
- 19:33end up with your fly lines so i knew this walking into the factory what i didn't
- 19:37realize is how many electronic controls are attached to this thing like you
- 19:41walk into the room and it's just wires and blanking lights and screens all over the place.
- 19:46And all that is because we have to control diameter so precisely.
- 19:51So we're always trying to keep our diameter to within plus or minus about a
- 19:55thousandth of an inch, which is like kind of an unimaginably small number if
- 19:59you're not used to, you know, working with fly lines.
- 20:03So, for instance, like a Rio Gold fly line, like a five weight Rio Gold,
- 20:09the biggest diameter is about fifty one thousandths of an inch.
- 20:12You know, if we screw up and make one that's forty nine thousandths of an inch,
- 20:15it's not going to pass our specs.
- 20:17So a lot of time and effort goes into controlling those diameters really,
- 20:21really tightly and making sure that our tapers are the right lengths and all
- 20:25that. So we hit the right specs in terms of weights and lengths at the end.
- 20:29So 2,000ths, is that your tolerance for diameter, 2,000ths of an inch?
- 20:34It's actually, so it's plus or minus 1,000ths. So, if we spec 50 thousandths
- 20:40for a section, if it comes in above 51 or below 49, yeah, that typically is
- 20:46enough to throw it out of tolerance.
- 20:49Unbelievable. So, I'm trying to picture this, and I can't wait to get over there and do a tour.
- 20:53I mean, it's been on my wish list for a long time, but basically,
- 20:57the core runs up into the oven.
- 20:59This plastisol is attached to, let's just say, a braided core.
- 21:03I know there's lots of different types of cores or braided cores.
- 21:06And I can't remember the name of the instrument that controls diameter,
- 21:10but basically I'm picturing like a camera aperture, you know,
- 21:14that's growing and shrinking to follow and build the taper.
- 21:17Is that a fairly good analogy?
- 21:20Yeah. Yeah, absolutely. That's, yeah, that's pretty much exactly how it works.
- 21:24And so then these fly lines go up and they go onto a spool and they bake as
- 21:29they go in. And what's the curing time like from the time the plastisol goes
- 21:34through the, let's just say, aperture?
- 21:36What's the curing time on that? Does that oven pretty much nuke it right then
- 21:40and there? Or is there a long dry time? Yeah.
- 21:44You know, it takes a little time. And that's one of the tricky parts of our
- 21:47process is, you know, setting the right temperature and setting the right cure time.
- 21:52And the cure time actually depends on diameter, too.
- 21:55So if you're if you're sending a skagit head into the oven, there's obviously
- 21:59way more plastisol on a 500 grain skagit head than there is on like two way
- 22:04creek line, for instance.
- 22:06So we compensate a little bit for how long it spends in the oven.
- 22:10We have to set the temperature very carefully because you obviously want to
- 22:14cure the plastisol quickly so that it doesn't sag or deform.
- 22:18But if you go too hot, you can actually damage your core material.
- 22:22So yeah, there's a lot of trial and error in engineering that goes into kind
- 22:28of setting those parameters.
- 22:30What percentage of your lines pass or fail QC?
- 22:35You know it's highly dependent on the product line
- 22:38yeah so i would say you know
- 22:41the the most difficult lines usually what
- 22:44happens is it takes a few iterations to to get
- 22:47a line in the spec so even though we're controlling
- 22:50our diameters really closely based on a
- 22:53you know a profile we're feeding into the equipment you actually
- 22:56have to in some cases put some english on the the machinery like
- 23:00there's there's variations in core diameter there's variations
- 23:03in the plastisol you're putting on there so really
- 23:06what we spec to is weight so for
- 23:10a shooting end for instance we're going to weigh it at the end and figure out you
- 23:13know is it 500 or is it 520 and if it's 520
- 23:16we might have to go back and tweak our parameters and
- 23:19make sure it's in spec so essentially what that means is like the first when
- 23:23we're starting up a run we typically have more scrap when we get into the meat
- 23:27of a run and it's running good then our scrap rate is actually really low we
- 23:32can you know you can pretty much count on your lines being good coming off the
- 23:35machine after that point.
- 23:37Yeah, so you just got to, once you got it cooking, then it's pretty straightforward.
- 23:42But the first few that come off of that, you're really scrutinizing over those.
- 23:46Yep, yep. And then there's other complicating factors, of course, too.
- 23:50Like a full floating line is typically a little bit easier to get into spec
- 23:54because the coating itself is lower density.
- 23:57So if you're off by a thousandth of an inch, you're not off by as much weight.
- 24:02If you're running like a really fast sinking line, like our densest coatings,
- 24:06then if you're off by a thousandths of an inch, that can be a huge difference in weight.
- 24:10That can be like 50 grains or something like that.
- 24:13Wow. Okay. That makes absolute sense. So like for a sink tip, for instance,
- 24:18you know, I picture this plastisol going on the core, it's working its way up
- 24:23into the oven, and then the compound, you know, obviously changes at some point
- 24:28from a, you know, a floating line or intermediate or hover or whatever it is.
- 24:32So like these triple density lines are really tricky because you might run like
- 24:36a floating, you know, running line and then some type of intermediate midsection
- 24:41and then a tungsten impregnated sink tip.
- 24:45Absolutely. Yeah, so those transitions are really tricky, both from a manufacturing
- 24:50perspective and a design perspective, too, because, you know,
- 24:53my goal as the designer is to get the line to cast really smoothly,
- 24:56you know, when you've got it out on the water.
- 24:58So, you know, if you're fishing a sink tip with a streamer, I don't want it
- 25:02to go from, you know, a very, very light floating line to a super heavy sinking
- 25:08section all in one foot, right? I want that transition to be smooth.
- 25:12So the way I think about that is I'm trying to make the weight smooth rather
- 25:15than the diameter smooth.
- 25:17So if you actually, if you look at some Rio sink tips, you'll notice that when
- 25:21we change density, when we go from a sink tip to the floating running line,
- 25:24for instance, frequently that's accompanied by a big jump in diameter.
- 25:28And that's also we can smooth out weight across that transition rather than
- 25:32just making a consistent diameter.
- 25:34But of course, that is a more difficult product to manufacture. sure
- 25:37i think that's one of the things rio does particularly well relative
- 25:41to our competition is that we design tapers that
- 25:44that fish and cast particularly well because we
- 25:47have the capability to control that diameter so so carefully man i'll tell you
- 25:52i will i'll give a nod to your guys's tropical outbound shore triple density
- 25:56man that line people ask me all the time i do a lot i do at least one rooster
- 26:02fish trip every year and people are always asking me is that still the line?
- 26:06Is that still the line?" I'm like, man, that tropical outbound shore triple density.
- 26:11The thing just casts like an absolute rocket. It's been crazy durable, turns over great.
- 26:17I absolutely love that line. But I'll probably look at it differently now.
- 26:23I'm kind of picturing how those compounds have to change and they also have
- 26:28to adhere to one another really well.
- 26:31You're right. You can't just go from one compound to another compound and hope they bond together.
- 26:37I'm sure there's a lot of, you know, kind of voodoo that goes into making sure
- 26:40that those transitions don't have weak points and things where the compounds
- 26:44don't like to mesh with one another.
- 26:47Yeah, yeah, that's absolutely right. I'm glad to hear you say that about the
- 26:50outbound short too, that we upgraded that one from just our old version,
- 26:55which was just one density in the tip, one density in the running line.
- 26:58Like you said, now they're triple density,
- 27:00so it even, it smooths out that transition even a little bit more.
- 27:03Predator series is another great example. That's my go-to streamer line here
- 27:08in Idaho, but yeah, very similar design process went into that one.
- 27:12Well, we're going to get to that. Hey, we're going to do the next question on my hot round.
- 27:17Was literally, I'm going to skip ahead, was streamer fishing from a boat on the Big Hole River.
- 27:25Yeah, so there you go. The Elite Predator would be the line of choice.
- 27:28It comes in a couple different densities, everything from full floater down to an FS5, S7.
- 27:35And yeah, so I fish that line all the time here in Idaho.
- 27:38Big Hole, very similar fishing style to what we've got here in eastern Idaho.
- 27:43So, and essentially we, we kind of designed that line through a process of trial
- 27:47and error here on our home rivers, fishing streamers. So that's my favorite for sure.
- 27:51Yeah. I just was looking at that on my list, kind of chuckling like,
- 27:55yeah, that's the predator right there.
- 27:57Okay. So the lines, you know, I got lots of kind of fishing oriented questions,
- 28:01so I want to stay on task, but I also, I want to follow this like manufacturing process.
- 28:05So, so the lines, they obviously get built in one, you know, contiguous strand.
- 28:11So how many in a build, like how many lines might go on one contiguous strand,
- 28:18assuming the equipment's working right, everything's coming out in spec, things are jamming.
- 28:23How many lines might be in one batch? So we usually target about 15.
- 28:29So 15 lines built kind of end to end. We call that a skein, which is a word
- 28:34that comes from the textile industry.
- 28:36So basically each 15 line skein,
- 28:39at that point, we cut it. We take the skein off of our wind up spool.
- 28:44Then we send it over to our coilers, who are going to then coil those 15 lines
- 28:49into individual fly line coils.
- 28:52And part of the reason we break it up that way is when they're coiling the lines,
- 28:56they're actually also checking for defects.
- 28:59They're checking for any, you know, inclusions or bumps or anytime the coating gets too thin.
- 29:05They can actually feel that when they're running the line through their fingers
- 29:07to make an individual coil.
- 29:10So every line gets run through human fingers to check for imperfections.
- 29:15Yep, absolutely. That is damn fascinating.
- 29:19Yeah and you would you'd be amazed at how quickly the coilers do this too they're
- 29:23you know they do this all day every day they get incredibly good at this singular task so,
- 29:30it's kind of embarrassing if i go over there to coil up an experiment
- 29:33or something like that it takes me 10 times longer to make a coil
- 29:36than them so what do they what do the coilers do man they just listen to podcasts
- 29:40and just jam through these lines all day or what yep yep and a lot of them are
- 29:45cross-trained on some of the other post-processing steps we have so of course
- 29:49there's you know loop welding pretty much every fly line we make now has got front and a rear loop,
- 29:55so that's another operation they work on there's a pack out operation of course
- 30:00once you've got your coil you got to put it on a spool and put it in a box so
- 30:03some of those folks rotate through those various stations yeah give them a break and,
- 30:09Man, that's cool. The skeins are smaller than I thought they would be.
- 30:13So that 15 lines, those are pretty small batches.
- 30:17So if you're doing an eight weight, whatever it happens to be,
- 30:21you'll run a batch of 15 and then you're going to hope that obviously everything
- 30:26went right and then you got to run another batch of 15 and another batch of 15.
- 30:31So there's a lot of manual labor involved in making a fly line.
- 30:35Absolutely, yeah. Yeah.
- 30:38One of the reasons we do that in the batches of 15 is that our coilers are hopefully
- 30:43feeding back any unexpected scrap to the guys working in the oven room.
- 30:48So, you know, there might be skeins of 15, but those might be breaking up a
- 30:55longer run of like a couple hundred, something like that.
- 30:57So it's important that, you know, they take the skein of 15 off.
- 31:01The coilers will work through it. if they're seeing anything unexpected or funky,
- 31:05they're feeding that back to the oven room quickly so we can fix any problems that might arise.
- 31:10Every time I've gone and visited someplace, they make reels,
- 31:14rods, or whatever, and I haven't been to a fly line company or manufacturer
- 31:18yet, but I always am shocked they don't charge more.
- 31:23Every time, I'm like, I know rods.
- 31:26Flight fishing gear isn't cheap for good gear, but I'm always impressed.
- 31:30I'm like, the fact that this doesn't cost more is actually amazing.
- 31:35And I know that a lot of people have sticker shock, whether it's a rod or a
- 31:38fly line or a reel or a boot or whatever it is.
- 31:41But every time I see something built by hand, I'm always so impressed.
- 31:45And I'm sure fly lines are no exception when I finally get over there to visit
- 31:48you guys in person and do some fishing on the South Fork.
- 31:52I've never fished the South Fork, and I'm dying to fish that.
- 31:57It's a great river, yeah. When you make it out here, you're going to have fun. It'll be good.
- 32:01You guys on like a summer or spring evening, is there a few drift boats in the parking lot there at HQ?
- 32:07Um yeah a couple couple drift boats in the parking lot
- 32:10so the the fishing for us is mostly we're just south of town and the fishing's
- 32:13north of town so i i float in the evening quite a bit but frequently my boat
- 32:18doesn't make it to work it's usually like blow out of here go home hitch up
- 32:22head north get on the henry's fork but yeah there's all kinds of fishing opportunity
- 32:27and we take advantage of it for sure,
- 32:30Yeah, I mean, some of those fisheries you guys have are just,
- 32:32I mean, it's like the Cooperstown of Western trout fishing.
- 32:37Yeah, I can't wait to get over there and do a couple of those floats.
- 32:41One question I've got is just, you know, is talk about flotation.
- 32:45Like, how in the world do we get a fly line that, you know, on the surface,
- 32:52in your fingers, it feels like it's pretty, like, well-fortified?
- 32:57You know, like it feels hard almost, like in your fingers.
- 33:00But how do you guys get that product to float? Like what makes a fly line float?
- 33:06Yeah, that's a great question. So there's two approaches to that.
- 33:10One that's been used in the past more frequently than it's used now is what's called a blowing agent.
- 33:15And that's something you actually put in the liquid coating to create bubbles.
- 33:20So airflow lines were made this way for a long time.
- 33:23Some of them I think may still be. But other brands and previous manufacturers
- 33:28use this technique a lot.
- 33:30It's nice because you're not adding any foreign material to the line except for bubbles.
- 33:37So that obviously drives the density down and makes your line float.
- 33:41Rio doesn't actually use that technique at all. What we use is a micro-bullet.
- 33:45So essentially, it's these tiny glass spheres.
- 33:48If I were to show you a vial of these things, they just look like a white powder
- 33:52because they're so small. But every one of them is a little hollow glass bubble.
- 33:56And the glass, of course, is high density. That's going to be higher density
- 33:59than the fly line coating you're putting them in.
- 34:02But the air that's entrapped in them is low density.
- 34:05So you're actually driving the overall density down by adding these small glass
- 34:10microspheres to the fly line.
- 34:12And those are nice because they never fill up with water.
- 34:15So there's this kind of pervasive fear among some fly fishermen that,
- 34:21you know, if your line sits in water too long, it's going to soak up some of
- 34:25that water and it's not going to float as well.
- 34:27I'm here to tell you that that's not the case.
- 34:29So the glass spheres, because they themselves are sealed, you can leave them in water.
- 34:33You can submerge your line, you know, hold it down with a rock overnight.
- 34:37And the density of that fly line is not going to change at all because the thing
- 34:41that makes it float is actually that hard sphere that's fully enclosed.
- 34:45Yeah, so they're glass bubbles, like microscopic glass bubbles.
- 34:51Yep, exactly. Now, how do you achieve the balance between like,
- 34:57obviously, we want a floating line to float like crazy good, right?
- 35:01That would be like the tip of a floating line, especially like we want it to float extremely well.
- 35:07Is there a limit to how much this material goes into like a fly line and is
- 35:12the same amount of material glass bubbles?
- 35:15I can't remember the term used, but is the same amount like in the running line
- 35:20as the tip and the head? Is it all the same or is there a different like recipe there?
- 35:25Yeah, those are great questions. So I'll start with the limit of how many of
- 35:29these micro balloons, we call them, you can put in a fly line.
- 35:33So the answer is you can keep putting them in. You can put tons and tons of these things in.
- 35:37You could drive the density of a fly line way down. You could make it like half
- 35:42as dense as water. It should float really nice and high.
- 35:45The only problem with that really, well, there's a couple. One is that the mechanical
- 35:49properties of the micro balloons are very different from the fly line.
- 35:53You want the fly line to be flexible, of course, glass is rigid.
- 35:56So if you put too many of them in there, you'll lose some of that flexibility.
- 36:00The line doesn't fish as well. But the other problem that a lot of people don't consider is,
- 36:05you know, if you make your fly line much less dense, if you make it half as
- 36:09dense as a floating line is now, you also have to increase the diameter a ton
- 36:13to make it weigh the right amount.
- 36:16So your five-weight line has to weigh enough to load your five-weight rod.
- 36:20If I decrease the density really precipitously. I also have to increase the
- 36:25diameter to keep that weight the same.
- 36:27So you'd end up with a really thick, ropey-feeling fly line, potentially.
- 36:32It doesn't cut through the wind as well. There's all sorts of atmospheric disadvantages
- 36:40to having a fly line that's thicker than it needs to be.
- 36:44Yep, precisely. So we've landed on a number that we think is about right.
- 36:49You know, we target a specific density or a specific gravity rather of 0.88
- 36:54roughly in a floating trout line.
- 36:56So that's a technical way of saying that it should be 12% less dense than water.
- 37:01Got it. And so what about durability? I mean, do the micro balloons,
- 37:07how do they impact durability of the line?
- 37:10Yeah, that's another good question. So like I mentioned, the mechanical properties
- 37:14of the glass being rigid, that's not what you want in your fly line.
- 37:18If you go too high on your loading of those glass bubbles, you do see a little
- 37:23bit of a drop off in durability.
- 37:25So you know that number i mentioned 0.88 we sort of shoot for that both in terms
- 37:30of you know durability having your line float high enough and then also getting
- 37:34the right mechanical properties it's got to be kind of a combination of the
- 37:37three but then we actually do we play some games with the tip of the fly line
- 37:41as well we've got a feature on a bunch of real fly lines called max float tip,
- 37:45and that's where the last you know 18 to 24
- 37:48inches of the fly line are actually a lower density coating so
- 37:51the thought there is you know not the whole line
- 37:54needs to float that high you really want the tip floating as
- 37:57high as you can get it and the tip typically it's
- 38:00not seeing rod guides as much as sort of like the middle of the
- 38:03head back of the head so you can get away with a little bit lower
- 38:06density there yeah got it i'm following that's it man it's really like there's
- 38:11a goldilocks threshold there of like you've got to have just the right percentage
- 38:18or right volume of micro balloons in there to get the buoyancy without making
- 38:21it stiff while still maintaining durability.
- 38:24There's a lot there when it comes to how you cook these things up.
- 38:29And then I'm sure within each product family, whether it's an indicator line
- 38:33versus a dry fly line, you know, obviously versus just a floating shooting head
- 38:38that might be intended to fish streamers.
- 38:40I'm sure that your guys' recipes vary for all those different applications.
- 38:46Yeah, that's definitely true. So probably the best example of that would be
- 38:50in space shooting heads.
- 38:51So like I mentioned, if you've got a 500 grain Skagit head, that's going to be a huge diameter.
- 38:57Typically, if you're fishing a floating Skagit head, you're swinging a fly. So it's on a tight line.
- 39:03You don't need quite as low a density to make your Skagit head float acceptably
- 39:09well on a tight line swing.
- 39:11So that's one of those cases where we used a little bit higher density.
- 39:14And that keeps the diameter down, makes your line fly farther,
- 39:18but you're not sacrificing anything in terms of keeping the line on the surface on that swing.
- 39:23Yeah, I mean, if it's a little bit more dense, it definitely is going to cut
- 39:26the wind better and have better aerodynamic properties for the long cast, for sure.
- 39:32There's a lot to it, man.
- 39:34There's more to fly lines, I think, than most of us. most of us just would be
- 39:42able to appreciate just exclusively on the consumer end of things.
- 39:47So over your time, you've been doing materials engineering at Rio for how long
- 39:54now? A little over eight years now.
- 39:56Okay, so let's just say in the last, I'll just say 10 years to make it a nice round number.
- 40:01Have there been more advances in fly lines or fly rods in the last decade?
- 40:10Oh, that's a tough question. Yeah, it's an interesting one.
- 40:14I would say in certain families of fly lines, there's been more advancement.
- 40:18For different techniques, there's always somebody who's got some new way of
- 40:22fishing that is gaining in popularity.
- 40:26And probably conversely, there's always some kind of fishing that's falling off in popularity.
- 40:31I think fly lines were probably more nimble in our ability to design a specific
- 40:36product for a specific application than fly rods.
- 40:41I can think of a couple examples of that. Can you give us an example of that?
- 40:46I'm thinking of a couple right now, but.
- 40:49Like a niche-oriented fishery or a niche application where you now have the
- 40:53technology to build something specifically for that use case?
- 40:58Yeah, sure. So an example I
- 41:01love is the bank robber line, which is like a niche of a niche, I call it.
- 41:08But that's a line that we designed very specifically for throwing terrestrial
- 41:12flies against a bank, which it's a niche of a niche because there aren't a lot
- 41:17of fisheries where that's like the predominant way to fish, we happen to live on a couple of them.
- 41:21So on any given summer day on the South Fork, whether it's stoneflies or hoppers or, you know,
- 41:27beetles, whatever, you stand a pretty good chance of catching nice fish by throwing
- 41:31a big bushy dry fly up against a fast moving bank where the fish are tucked
- 41:36in really tight to structure.
- 41:38So that's kind of an application that we recognized as one that lots of people
- 41:43are participating in, particularly here.
- 41:46And we said, you know, what can we do to make a fly line that works even better for that?
- 41:50And we ended up with this really super specialized taper over the course of
- 41:54a season of testing that's great for that.
- 41:56It's got a rear loaded head, so it loads the rod deeply without splatting your
- 42:02fly down too hard or kicking your leader over too hard.
- 42:05It's got kind of a long, gentle front taper, but at the same time, it's over-weighted.
- 42:11So again, it'll carry a big fly, but it doesn't kick it over or smash down too hard.
- 42:16You can cast it really precisely for those reasons.
- 42:20Yeah. And one example I had in mind, what were you thinking?
- 42:23Yeah, I was thinking like some of your guys' tropical clear tip floaters and
- 42:28some of the clear floating lines, and especially like temperature ratings for lines,
- 42:34seem to have gotten, say, over the last 15 years, I feel like the saltwater
- 42:39lines for tropical environments have gotten really so much better.
- 42:45And that's actually one of my questions
- 42:46is just, can you just explain like temperature ratings for people?
- 42:51Like why, you know, for fishing, you know, bass in Louisiana,
- 42:56you know or whatever like a southern state where we're fishing 75 degree water
- 43:01versus cold water versus tropical like,
- 43:05Just talk real briefly about temperature ratings and how people should pay attention
- 43:09to where they're fishing and what the line is rated for.
- 43:12Yeah, absolutely. That's great, too, because I was coming at it from a taper
- 43:16perspective. You're coming at it from a materials perspective,
- 43:18but both are equally important.
- 43:20So, yeah, temperature is a really important thing. That's something we think
- 43:24about for every fly line application.
- 43:27And it's tradeoffs, unfortunately, like everything in life, right?
- 43:30So you can make the world's most supple, soft fly line for cold water fishing.
- 43:37And it's great if you're trying to drift a dry fly and make sure it doesn't drag at all.
- 43:42But if you were to take the same line into a tropical environment,
- 43:45so you're going to take a Rio Gold bone fishing.
- 43:48Now, all of a sudden, it's, you know, 85, 90 degrees and humid.
- 43:52That same coating that's supple and drifts really nicely on a trout stream,
- 43:56it's going to get sticky and kind of gummy and almost too soft to shoot really
- 44:01well in those tropical conditions.
- 44:03So in those scenarios, we use basically a harder coating and we also put it on a stiffer core.
- 44:09So a lot of our tropical lines are made on a monofilament core to keep that
- 44:14line stiff and make sure it shoots effectively in those tropical conditions.
- 44:18So yeah, that's absolutely, it's sort of foundational to where we start on a fly line.
- 44:24We figure out where does this thing where is it intended to be fished?
- 44:28What are the conditions there on an average day?
- 44:31From there we pick a coating and a core that's going to sort of match the temperature
- 44:36range we expect the line to see.
- 44:38Yeah, I mean my personal opinion is I think there's been, I would say a more
- 44:43profound technological advancement in lines versus rods.
- 44:49And I've said this again and again and again as a fly line guy,
- 44:52you probably say the same thing.
- 44:53But I'll take a mediocre rod with
- 44:55a great line versus a great rod with a mediocre line every single time.
- 44:59I think fly lines are grossly underappreciated and underutilized by kind of the average consumer.
- 45:06I mean, the fly line is the delivery mechanism, you know, for the cast.
- 45:10It has to fly through the air. It has to float or it has to sink.
- 45:14It has to be able to be mended. You have to be able to feed line.
- 45:18It's got to have the right stickiness on the water so that if I am feeding line
- 45:22or doing a lot of those fishy little adjustments, if it's too buoyant,
- 45:25I don't want my fly jumping around every time I twitch my rod tip.
- 45:29You know, I need a little bit of anchor.
- 45:31I think lines are just grossly underappreciated for how they can alter your
- 45:37setup as well for windy conditions versus calm conditions, big flies versus
- 45:42small flies, dry flies versus streamers.
- 45:46I think fly lines are something where people can take a 10 or
- 45:4915 year old rod and put just the
- 45:51right line on it that's engineered for their use application and breathe incredible
- 45:57life into a rod that they may have forgotten a bit about and really make that
- 46:02rod kind of a purpose built and highly functional tool specifically for whatever
- 46:08application they're in.
- 46:09So my vote's for fly lines. And I'm not just saying that because you're on the podcast.
- 46:13Now, I will say this because we do sell a lot of rods.
- 46:17If I were running out to buy a new rod today, I'm not buying a 10 or 15-year-old
- 46:21rod. I'm going to invest in the right rod for the job today.
- 46:24And then I'm going to plan to use that rod for a decade or a couple of decades.
- 46:28Yeah, I think lines have gotten so much better, especially in that tropical arena.
- 46:32I remember when I first started flats fishing, the number of running line tangles
- 46:38and knots I would have on the deck.
- 46:40The lines were sticky. they were gummy they
- 46:44they were relatively memory free that
- 46:47there's a certain value to having memory and you
- 46:50can speak to this because that's one of my questions here but like yeah
- 46:54like if i'm on the deck of a flats boat and i peel my
- 46:57line off my reel and my line has the impression if it has some coils that remain
- 47:02in it that same stiffness and i'm talking about my running line which may be
- 47:06down around my feet i want to see some coils in that line because that tells
- 47:11me that when I send that line out in flight and it's straight,
- 47:16that same stiffness that showed me a few curls is also going to be able to hold
- 47:22that loop in the wind at the same time.
- 47:25And so I think that stiffness of the running line on the tropical lines has
- 47:28just been a huge advantage in it, not way less than some of the older lines,
- 47:34say, 10 or 15 years ago in those tropical environments.
- 47:37Yeah, I think that's absolutely true. We're always targeting a stiffer line
- 47:42for those tropical applications than we are, like a trout fishing scenario.
- 47:46The other thing I'll add to that, and I'll get on my soapbox here a little bit,
- 47:50I tell every angler who will listen, I give them this advice,
- 47:53and that is you should always stretch your fly line.
- 47:56And what I mean by that is when you do strip that tropical line off,
- 47:59a lot of people are discouraged by those coils. It comes off,
- 48:03it falls on the deck, it lands in coils sometimes that are the same size as the arbor of your reel.
- 48:09And that can be due to a couple of things. If you store a fly line on a reel,
- 48:14if it hasn't been fueled off for a year since your last trip to Belize or wherever
- 48:19you're fishing, it's much more likely to develop that memory.
- 48:22The good news is you can almost always get rid of that memory by stretching the line.
- 48:27So if that really bothers you and it's becoming an issue on the flats,
- 48:30I encourage everybody at the start of every day,
- 48:33you know, strip off as much line as you're going to use and then just five or
- 48:37six feet at a time, give it a good firm stretch between your hands and that'll
- 48:41knock that memory way down.
- 48:43But of course, it still maintains that stiffness that's so nice to be able to
- 48:46shoot a nice long cast out there. Yeah, I like seeing the coils.
- 48:49That tells me that that line is built for that.
- 48:53And it's going to hold that nice straight, you know, that razor straight kind
- 48:57of frozen rope type, you know, profile.
- 49:00You know, when I send that thing into flight, it's actually going to be able to stretch it.
- 49:07To, to protrude itself out into the wind or whatever it happens to be.
- 49:10I really liked the stiffness of some of these new tropical lines that are out.
- 49:14Hey, by the way, did you invent the fly line cleaning towelette from real?
- 49:22No, I can't, uh, I can't claim any ownership of that. And that's depending on who you listen to.
- 49:26There's podcast over, dude. I freaking love those things. Whose idea was that?
- 49:32So it depends on who you ask. I think the origin story I heard was like over
- 49:37a plate of barbecue with those like, you know, singularly wrapped like moist towelettes.
- 49:43Zach Dalton, our old sales manager, said like, hey, why don't we put,
- 49:46you know, a fly line dressing in the same package?
- 49:49I'll give Zach the credit because Zach's a great guy. But yeah,
- 49:52those things are awesome. I never go anywhere without those.
- 49:55Oh, I use them all the time.
- 49:56I mean, I keep them in my kit bag, even for trout.
- 49:59I think, you know, people pay 130 bucks for a line. Let's just say they're buying
- 50:02one of the elite series lines. Clean that thing, people.
- 50:05Take good care of it. It's $130. Just wipe it off. It doesn't take much.
- 50:10And then those little towelettes, everybody should have a dozen of those things.
- 50:14And you don't need to be neurotic or super in or attentive about it,
- 50:18but just wiping that thing down every other time you go out is going to prolong
- 50:24the life of your line. It's going to perform better. It's going to shoot better.
- 50:27You're going to get that sand and grit and gravel and all that stuff off your line.
- 50:31And it just breathes so much fresh life into
- 50:34into a line to get it clean and coated again so
- 50:38you couldn't man i thought that was i thought that was right yeah dang it i
- 50:43wish i could claim ownership of that one yeah we we give a couple different
- 50:47styles of advice for for cleaning fly lines like the the absolute best way to
- 50:52clean your fly line is you know run some like warm water into your sink,
- 50:56put some soap in the water,
- 50:58strip your line into the water, soak it for a while, you know,
- 51:01wipe it off a time or two, reel it back onto the reel.
- 51:05I can't really in good conscience advise people to do that because I am not
- 51:09nearly patient enough to do that myself.
- 51:11So, you know, the practical advice I give people is use those towelettes.
- 51:15Those things are awesome.
- 51:16Like I said, I've always got those with me. It takes 30 seconds in the boat
- 51:20to run up the line and down one time.
- 51:22And that gets you 90% of the way there, in my opinion.
- 51:26Dude, I was talking to Peter Knox and I was fishing with him a month or two ago.
- 51:31You know, for those that don't know Peter, I'll have him on the podcast at some
- 51:33time, but he's the, I would say, the chief rod engineer at Sage Fly Rods and just a super dude.
- 51:41But he was telling me like when he's flats fishing, like if his line's in the
- 51:46water and they're at one zone and they move to the next, he'll lube his line like between spots.
- 51:51Now, I think that's making it to like an extreme.
- 51:54But when somebody who cares that much about casting and performance of equipment
- 51:59is telling me that he's cleaning or lubing that line throughout the course of the fishing day,
- 52:06then I started thinking, well, maybe I should do it at least every couple days.
- 52:11It's kind of like flossing your teeth. It's kind of like flossing your teeth, man.
- 52:15You know it's good for you to do twice a day, but nobody does. You got it.
- 52:21Okay, let's talk about loops for a minute. because there's certain things that
- 52:27irritate me in fishing in general.
- 52:30And one is people say, oh, I don't use welded loops. I don't like welded loops.
- 52:36Are the welded loops of today the same as the welded loops of 10 years ago?
- 52:41Absolutely not. In fact, they're made in a totally different way.
- 52:46We have completely different sets of equipment to make loops now than we did 10 years ago.
- 52:51And they've gotten much better. yeah we actually we
- 52:53have a test that we run so when we're we're welding loops we
- 52:56do those in batches as well i mean every so often we're
- 52:59we're testing a loop to failure so when you're starting up
- 53:03the welder to put loops on the end of a fly line you know we we take a couple
- 53:08practice welds to get it dialed in make sure we've got the right temperature
- 53:11and stuff like that and then to prove to ourselves that we've made a good loop
- 53:14we actually take it over to our our tensile testing machine and we pull on it till it breaks.
- 53:21And the criteria for passing is that the line should fail in the core before the loop opens.
- 53:27So that's actually the case for almost every fly line out there now with a welded
- 53:32loop is that if you pull on the welded loop, well, I'm speaking for Rio here.
- 53:36If you pull on the welded loop, the core of the fly line will actually break before that loop opens.
- 53:43So people who are concerned about the strength of loops, you know,
- 53:47past generations of loops weren't as good when it was still sort of a new feature
- 53:51that manufacturers were putting on fly lines. I think there was a higher rate of failure.
- 53:56But these days, I have complete confidence in the welded loop that comes on the fly line.
- 54:01The coating that's on them is incredibly hard and dense.
- 54:04And man, I've caught giant rooster fish, giant tarpon, giant trevally.
- 54:11And I trust the welded loops. Now, my fly lines are usually pretty fresh when
- 54:15I'm going on these high-stakes trips.
- 54:17But to this day, I have not had a welded loop fail on a fish.
- 54:22Certainly, I've worn some loops out, and I've cut them off.
- 54:26And then I'll have another question for you in a second regarding knots.
- 54:29But yeah, I love welded loops. I think they're great.
- 54:34I absolutely run welded loops on everything. I trust them.
- 54:37Where I see people fail with welded loops is they go cast the living shit out
- 54:42of these things in a gravel or paved parking lot.
- 54:45And they cast it with like no leader on there.
- 54:49They beat the shit out of the welded loop.
- 54:52Itself and then you can see often when you
- 54:55when people send in a picture like oh
- 54:58my loop failed and you can see that it wasn't actually the
- 55:01loop that failed it was the material above
- 55:04the welded loop because they either got a tangle and pulled on it because tippet
- 55:10will cut fly line if you just pull on a tangle or they just beat the snot out
- 55:15of it either on their back cast or just casting in the parking lot,
- 55:20the yard, whatever it is.
- 55:22But when it comes to like tinsel strength of a welded loop on even,
- 55:26you know, large pelagic species, I've got incredibly high level of confidence.
- 55:32For a fresh fly line, a new fly line, I have more confidence in a welded loop
- 55:38than I do an Albright knot, even if I reinforce it with UV.
- 55:43Like I have had more failure on knots.
- 55:46Just I think the way that my mono cuts into that core and gets built but I've got.
- 55:53Tremendous confidence in welded loops it wasn't true 10 years ago but the welded
- 55:58loops of today are definitely feel and look different than they used to.
- 56:03Yeah, definitely. Part of that, one of the big things we changed is that almost
- 56:08all of our fly line loops now are actually reinforced with like an additional sleeve of material.
- 56:14So, you know, if you take a close look at a loop on the front end of a Rio trout
- 56:19line, you'll actually see a small section.
- 56:22It's about a one eighth inch section that's like a little bit raised.
- 56:26It's a slight bump. and that's actually an additional sleeve of material that
- 56:30we weld over the joint in that loop just to make sure no tag end is going to
- 56:35lift up or come unstuck essentially.
- 56:38So yeah, I'm with you. I love the welded loops. I almost never bother cutting one off.
- 56:44The only situation in which I cut off a welded loop and replace it with a nail
- 56:49knot is on my sort of like technical dry fly rod.
- 56:54So technical trout, if I'm fishing like a 15-foot leader, I want the smoothest
- 56:59possible connection going in and out of the guides.
- 57:02And just for me personally, I've found that a nail knot slides in and out of
- 57:06guides a little bit easier than a loop-to-loop connection.
- 57:08But outside of that application, I fish welded leaps on everything.
- 57:11Oh, yeah, even better than an Albright knot, which is one of my questions.
- 57:15So, yeah, that pretty much answers it. I was going to say like if you have loop
- 57:20failure or say a buddy of yours, you know, that's often what happens for me
- 57:25is my buddy shows up with a crap fly line. The loop's busted.
- 57:29He's like, hey, can you tie this? How do I put my leader on?
- 57:32I just cut it and I generally tie Albright knots so that I don't have to reach
- 57:36into my kit bag and grab a tool because I'm.
- 57:40I can't tie a nail knot without a tool with any practicality or efficiency.
- 57:45So generally, I do Albright knots because they're a little bit easier for me without a tool.
- 57:48But you bring up a really good point that that nail knot, especially if you
- 57:52were to put like a UV coat on it, slides through the eyelets much better.
- 57:56Because the way that little tag on the fly line for the Albright knot and the
- 58:00fact that the fly line is doubled over on an Albright knot versus a nail knot, it is not.
- 58:06No pun intended there. But man, the nail knot is pretty sleek and it cuts through
- 58:09the wind a lot better as well.
- 58:12Yep, definitely. One other technique I like for putting a loop on the end of
- 58:16a line, and actually I do this pretty frequently on prototypes because,
- 58:20you know, if I've designed a prototype and the ops guys have built it for me,
- 58:24you know, I'm usually very eager to get that thing out and cast it and see if
- 58:28whatever I designed into it is working the way I intended.
- 58:31So often I'll actually skip the welding step.
- 58:34You know, it takes another day or so in our factory to get it through welding.
- 58:38So one of the things I'll actually do is I'll take a line with no loop.
- 58:42I'll double over the end and then I'll tie a couple of nail knots over the doubled
- 58:46over section just to keep it folded over.
- 58:49And that creates, you know, it's not a welded loop anymore, but it's kind of like a knotted loop.
- 58:53And I actually, I fish a lot of prototypes here locally. So I end up fishing
- 58:58lines like that quite a bit. And that's been a really effective technique for
- 59:01me, quick way to make a loop that you can then loop a leader on to.
- 59:05Yeah, that's what I used to do old school-wise for a lot of my big game setups
- 59:11before loops had the integrity that they do now.
- 59:15What mono are you using to build those loops for yourself?
- 59:20I usually do it with 16 or 20 pounds, something like that.
- 59:25You don't want it to be the diameter of a liter, but that would be too big and too bulky.
- 59:31But you also don't want to be doing it in 4X because that's going to just cut
- 59:35all the way down through to the core and not hold as well.
- 59:38So yeah, 16 or 20 pound. I usually am using probably saltwater mono because
- 59:44it's like what's available at my desk.
- 59:48Yeah, yeah, that's the same for me. I generally use them doing this on say 8
- 59:53to 12 weights. And I'll generally use 20 pound to build those.
- 59:57And then if it's available, I'll run a little UV on there just to help make
- 1:00:01it a little bit smoother, They're a little less catchy.
- 1:00:04I'm so glad that I didn't have to hang up on you.
- 1:00:07If you were to say that you put a braided loop on there with a little shrink
- 1:00:11tubing, we wouldn't be friends anymore.
- 1:00:14Those are the words for people listening,
- 1:00:17Those braided finger cuff loops are one of the worst things I realize.
- 1:00:22I mean, I've done so much dumb stuff in fishing. I've used those things,
- 1:00:26but they hinge and they sink.
- 1:00:28And anything you add to the tip of your fly line that holds water and sinks
- 1:00:32is generally a bad idea, people.
- 1:00:35Like, you want to minimize the amount of material on the tip of your fly line, not add to it.
- 1:00:41Yeah, totally agree. Those are, you know, they've got their applications in certain scenarios.
- 1:00:47The best one I can think of is like space sink tips.
- 1:00:51If you're trying to replace a loop on a sink tip where obviously you're not
- 1:00:54trying to get the line to float to begin with, that works out okay.
- 1:00:58But yeah, for the same reason, hinging more bulk at the end of your fly line.
- 1:01:02I really don't like those on the end of a floating line.
- 1:01:05Yeah, I'm on a campaign against those things. I think I'm going to go buy up
- 1:01:09every one of them on the market and then just throw them away to spare people.
- 1:01:12That'll be like my humanitarian mission of the year is to eliminate all braided
- 1:01:18finger cuff type loop-to-loop connections.
- 1:01:21Okay, technical stuff here again, and then we're going to do another little
- 1:01:25speed round of different scenarios.
- 1:01:28He goes, can you explain just like the standardization of like a five-weight rod and how that,
- 1:01:38how, you know, a five-weight is just a five-weight. And I usually tell people
- 1:01:42it's an arbitrary number.
- 1:01:44We generally run from zero to 14 with a five being kind of a,
- 1:01:47you know, trout deal, you know, or that kind of that sweet spot for,
- 1:01:52you know, miscellaneous light tackle fishing.
- 1:01:54But there's a corresponding grain weight
- 1:01:56in fly lines that is indexed and standardized for like a five weight.
- 1:02:01And we talk about line weights and grains.
- 1:02:04Can you just explain that standard and how Rio or fly line makers have kind
- 1:02:13of tweaked that standardization over time?
- 1:02:17As an answer to rods becoming higher modulus, a little bit faster action.
- 1:02:22Just explain the grain weight standardization versus line weight and then how
- 1:02:27that maybe has changed a little bit. Yeah, absolutely.
- 1:02:30Man, this is a deep one. I could go for an hour on this topic,
- 1:02:34but the fastest way to explain it is there is a line weight standard out there.
- 1:02:40It was maintained by AFTMA when that was still the trade organization.
- 1:02:45Now AFTA actually owns that standard.
- 1:02:48But essentially what the standard says is, you know, for a given line weight,
- 1:02:53the first 30 feet of your fly line should weigh some specified number of grains.
- 1:02:59So for a five weight fly line, the first 30 feet of your fly line is supposed to weigh 140 grains.
- 1:03:05There is no corresponding standard for a fly rod, which gets really tricky, Right.
- 1:03:11Because, you know, you everybody buys a five weight rod and they say,
- 1:03:15OK, I need a five weight line to go on this rod.
- 1:03:18In reality, it's like you're kind of starting with a five weight line.
- 1:03:22And then ideally, the fly rod manufacturer is building a five weight rod that's
- 1:03:27intended to cast that five weight line.
- 1:03:31It gets really technical. It gets really walkie.
- 1:03:34And unfortunately, the standard, I would argue, is slightly broken just because
- 1:03:40it doesn't cover the full breadth of fly fishing applications out there.
- 1:03:45So what I mean by that is, you know, when the standard was written,
- 1:03:49I think it was probably maybe it was like 50, 60 years ago now,
- 1:03:52something like that, when that standard became commonplace.
- 1:03:56Fly fishing wasn't as broad. It was mostly trout fishing. And,
- 1:04:00you know, a majority of the rods sold were five weights. That's still true today.
- 1:04:05But since then, you know, different species, different techniques,
- 1:04:08different flies have all come into play and become more common.
- 1:04:12And my opinion of that standard is that it's basically it's too restrictive
- 1:04:16to cover the full breadth of fly fishing. So if 140 grains is supposed to go
- 1:04:22on your five-weight rod, that's sort of assuming you're casting pretty small flies.
- 1:04:27I do fish a setup that conforms to that standard when I'm fishing small dry flies.
- 1:04:32But the situation gets really complicated when you start trying to cast, say, a big streamer.
- 1:04:37So if I'm throwing a five-inch long streamer and trying to catch the biggest
- 1:04:42trout in the river, all of a sudden I need more grain weight to carry that streamer.
- 1:04:47But I don't necessarily want to put.
- 1:04:50Higher grain weight line on a heavier rod so the
- 1:04:53best example i can give you from the the rio catalog would be
- 1:04:57you know two two fly lines that we sell quite a
- 1:04:59few of the first one just for argument's sake we're going to say we're fishing
- 1:05:03a six weight rod first line would be a six weight gold it's a relatively long
- 1:05:09head it's it actually does conform to the afta standard i think that line is 166 grains at 30 feet,
- 1:05:17which is within the tolerance of what the AFTA standard says a six weight line should be.
- 1:05:23And it's a long head and it casts small flies really well.
- 1:05:26The other line I'll tell you about is the six weight outbound short.
- 1:05:30So I fish that line on the same rod. You know, I can take whatever nine foot
- 1:05:35six weight I've got. I could put an outbound short or a Rio gold on it.
- 1:05:38The difference is the six-weight outbound short weighs like 240 grains in the first 30 feet.
- 1:05:45So that throws a lot of people. A lot of people say, wait, 240 grains,
- 1:05:49that's a nine-weight on the aft of standard.
- 1:05:52Why would I put a nine-weight line on my six-weight rod?
- 1:05:57And I chose this example intentionally because the full head length of a Rio
- 1:06:02Gold also weighs about 240 grains.
- 1:06:05So That's got like a 49-foot head.
- 1:06:08If I'm making a long cast and I'm carrying all 49 feet of that head,
- 1:06:12I've got exactly the same grain weight on my six-weight rod as if I'm casting
- 1:06:16the first 30 feet of an outbound short.
- 1:06:20So that's kind of like a long, rambling way to say that it doesn't really matter
- 1:06:25how much the line weighs in the first 30 feet. What matters more is how much
- 1:06:29weight you're actually carrying in the fly line.
- 1:06:32So for longer headlines, they tend to be lighter in the first 30 feet because
- 1:06:36if you're trying to carry the
- 1:06:37full length of that head, it's going to bend the rod more deeply anyway.
- 1:06:41Shorter headlines tend to be heavier in that first 30 feet because you're trying
- 1:06:44to get that rod to load deeply on fewer false casts.
- 1:06:49You're trying to carry a bigger fly or shoot for distance after you got that first 30 feet out.
- 1:06:55Yeah, so it's the line that has the quantifiable standard.
- 1:07:00And then the rod builders that are building a rod and putting a four or five,
- 1:07:06six or seven weight on it, we're going to assume that they're going to test
- 1:07:10these rods with lines that would match the intended use case for the rod.
- 1:07:16But the line itself has a quantifiable standard for grain weight.
- 1:07:23Yep, that's exactly right. Yeah, I mean people get hung up and I don't so much,
- 1:07:27but it's amazing the number of questions we get as a retailer,
- 1:07:31you know, in regards to, you know, real, you know, schematics of various line profiles.
- 1:07:38You know, I wanted to ask that because I think that, you know,
- 1:07:42maybe we can take this to our next cocktail party and BS about fly fishermen.
- 1:07:46Now we know something about it. Now, 30 feet, 140 grains, that's the standard five weight index.
- 1:07:51Now I know I can drop a couple knowledge bombs on my friends,
- 1:07:55show them how much I know.
- 1:07:56The one other good one to be armed with when you're walking into that discussion
- 1:08:00is, you know, nobody has a mental picture of what a grain is, right?
- 1:08:05That's a funky, you know, measurement of weight. Nobody has a real physical
- 1:08:09standard to tie that back to.
- 1:08:12So the stat I like to throw out is the difference between a five-weight standard
- 1:08:16line and a six-weight standard line is, you know, 140 grains for a five-weight,
- 1:08:21160 for a six. So it's a 20-grain difference.
- 1:08:2520 grains is roughly the weight of a standard business card.
- 1:08:29So people get all bent out of shape over these 20 grains.
- 1:08:32You know, oh, is this a half-size heavy? Is it a, you know, a full-size heavy?
- 1:08:36If it's a full-size heavy i don't want it to overload my
- 1:08:39rod we're we're talking about the weight of a business card spread
- 1:08:43out along 30 feet of fly line so it's
- 1:08:48pretty small and that's also that that's why we have to control our diameters
- 1:08:53to within a thousandth of an inch you know we're we're talking about some really
- 1:08:56minute differences here and while they are significant like i'm i'm the designer
- 1:09:00who who claims that we need to design it just so so it performs this way I do believe that,
- 1:09:06but I also think people who get panicky about a line that's one size heavy,
- 1:09:10I think that fear is a little overblown.
- 1:09:12Yeah, I think, you know, by the time we scrutinize over those types of details,
- 1:09:15we're focusing on the wrong part of the mission, and the mission needs to be,
- 1:09:18you know, different lines are built for very different things,
- 1:09:21whether that's streamers, indicators, dry flies,
- 1:09:24you know, hopper droppers, you know, you know, huck and clousers and stripers,
- 1:09:28etc there's a lot of other things to be focused on i want to uh i want to ask
- 1:09:34a couple more questions then we're gonna we're gonna close out the podcast on kind of a speed round,
- 1:09:39what are your real briefly what are your thoughts on pink floor carbon.
- 1:09:45Oh, yeah. I'd love to talk about pink fluorocarbon. I just got some.
- 1:09:50I haven't used it yet. That's why I'm asking you.
- 1:09:52Yeah. So I don't fish it personally. And my thinking goes like this.
- 1:09:57So the argument for pink fluorocarbon is it basically has to do with light attenuation underwater.
- 1:10:05So that's how much light is filtered out as you go deeper underwater.
- 1:10:10And basically different wavelengths of light, They penetrate water differently.
- 1:10:16So the longest wavelengths of light, which is red,
- 1:10:20they don't penetrate as far as the shortest wavelengths of light.
- 1:10:24So red is sort of the first one to drop out as you go deeper.
- 1:10:27So the argument that's been made for pink fluorocarbon is like,
- 1:10:31okay, so red's the first, you know, pink fluorocarbon is, it's reflecting some red light.
- 1:10:37And if red light is the first one to disappear underwater, the pink coloration
- 1:10:42will disappear underwater and it'll appear invisible or transparent to fish, right? Right.
- 1:10:49The way I think about it is like, okay, that makes sense if it's going to be deep.
- 1:10:53If it's on the surface, there's a lot of red light on the surface,
- 1:10:56and I could just as easily fish clear fluorocarbon that doesn't reflect any
- 1:11:00light at all. So for that reason, I fish clear.
- 1:11:03Well, I'll tell you why. I got it. I got it because I can see it.
- 1:11:09And a guy told me, you know, I know how many times I've heard people say,
- 1:11:12man, I just can't see the leader to tie it on. So I got a bunch of the 5X and
- 1:11:176X and 3X pink fluorocarbon, only because you can see it in low light.
- 1:11:24But Eric Nickum, our travel manager, went out and he was guiding.
- 1:11:27And he fished pink fluorocarbon on one rig for trout and clear on the other.
- 1:11:33And he was convinced after one day that clear was way more productive.
- 1:11:39But so that's interesting to hear because i was i
- 1:11:42was gonna say next that like i fundamentally i
- 1:11:45just don't think fish are that you know leader shy or tippet
- 1:11:48shy i think they're they're looking for a good presentation whether that's like
- 1:11:51a nice drift or a streamer presented in the right way so i wouldn't have guessed
- 1:11:56that you catch fewer fish necessarily on the pink fluorocarbon i just wouldn't
- 1:12:00have bought the the invisibility argument no i don't buy the invisibility argument
- 1:12:04I got some because I was like, man,
- 1:12:07maybe if this does actually catch an older, you know, older guys,
- 1:12:12I'm entering that category, by the way, people, since it's not,
- 1:12:15there's no ageism happening here on this podcast, for the record.
- 1:12:19Older guys that don't see as well can tie their flies on better.
- 1:12:22That's the only thing that I'm really interested in knowing is if it fishes
- 1:12:27fine or reasonably as well and you can see it better to untangle or tie knot.
- 1:12:34Maybe there's something there. I was just curious. I don't have a strong opinion.
- 1:12:37I haven't even tested it yet. I just got a bunch and I haven't really been out
- 1:12:40fishing lately the last couple weeks to give it a try.
- 1:12:44I do like the visibility argument. And I, I know a lot of, I fish with a lot
- 1:12:47of anglers who my, my dad is a great example.
- 1:12:50My dad hates tying knots just because it's like a pain. It's hard to see what's going on.
- 1:12:55So, you know, instead of tying knots, he like cuts his leader back until he's
- 1:12:58fishing like way too heavy and then he can't catch anything that way.
- 1:13:01And yeah, maybe, maybe I'll suggest some pink fluorocarbon.
- 1:13:05Like if you can see it well enough to tie knots and that gets you fishing the
- 1:13:08right rig, that's probably a leg up.
- 1:13:10Dude, you know, I was, I'm dreaming these things.
- 1:13:13These are things I dream about. But I was like, man, when I'm rolling the boat,
- 1:13:16like we, I don't know if you've been to the Acoma Canyon, but like our summer
- 1:13:19water is big, high, swift, and raging.
- 1:13:23And so we can't always get an anchor down when a dude gets like a small tangle.
- 1:13:27And I was like, man, if I was running this pink fluorocarbon and a guy got a
- 1:13:31small tangle and he could see it a little bit better to like unwrap the fly
- 1:13:35off the head of his rod tip, I was like, everybody wins, you know? He's totally.
- 1:13:41So this is the kind of stuff I'm thinking about now. So when I ran out of others.
- 1:13:45That's it, man. That's like, I tell everybody the single biggest variable is,
- 1:13:48is your fly in the water or not. And if it gets your fly in the water more,
- 1:13:51you're going to catch more fish.
- 1:13:53Yeah, apparently I've ran out of shit to sell or do. So now I'm going to try this.
- 1:13:58Okay, we're going to start some quick questions. What knot do you splice your trout tippet with?
- 1:14:04Say you're splicing 3X to 4X. What are you tying?
- 1:14:07I like a blood knot. It's not any stronger in the testing we've done.
- 1:14:12When we're looking for new tippet materials, it's no stronger than a surgeon's double or triple.
- 1:14:18But I like a blood knot because I can look at it and tell if I tied it correctly
- 1:14:21or not. Yeah, plus you're classy. Yeah.
- 1:14:25Yeah i'm i'm surgeon's knot and then i
- 1:14:27go into double uni i suck at blood knots i need
- 1:14:30to just i need to like take a month and be like i
- 1:14:33am only tying blood knots for a month and so
- 1:14:36i get very efficient at them but dude have you seen those little viral instagram
- 1:14:40videos of the that kind of the blood knot technique where they have the like
- 1:14:45the two different colors and they basically put the two tips end to end and
- 1:14:50tie a half hitch in it and then they roll that over itself.
- 1:14:55Have yeah i've never tried making them
- 1:14:58that way i don't know i just i got my like muscle memory
- 1:15:01down i got my my own little technique to to get
- 1:15:04it done but yeah i've seen those videos yeah they're like
- 1:15:07you can't they're like uh you know there's those audio sensory type videos you
- 1:15:11just can't help but watch it and so i watched one of those and i went and tried
- 1:15:15it and i made a beautiful blood knot the very first time i used that technique
- 1:15:20and then i tried like 10 more times and couldn't replicate it worth of crap and gave up.
- 1:15:26But so, yeah, I think it was, yeah, I need to just stick with it.
- 1:15:33Yeah, and so what do you tie most of your flies on with? So say you're tying
- 1:15:38a hopper on. What are you doing?
- 1:15:40I like the clinch knot and not the improved clinch knot. And I say that because
- 1:15:44I find the improved clinch knot is a little harder to see.
- 1:15:47So if you get it exactly right, it's probably a little stronger.
- 1:15:51But you know i've just not i have not been able
- 1:15:53to seat it perfectly consistently enough to
- 1:15:56be totally sold on the improvement yeah man
- 1:16:00after my own heart the yeah the improve part
- 1:16:03adds about double the amount of time and then for
- 1:16:06the number of times i get it perfect i jumble it up and
- 1:16:09kind of screw them up an equal number of times yeah
- 1:16:13so just straight improve keep it simple okay let's
- 1:16:17run through kind of a quick hot round and then we're going
- 1:16:19to close her out okay so people that are listening listen up
- 1:16:23and see if any of these these these fisheries
- 1:16:26or scenarios kind of match up with what you're fishing you are
- 1:16:29indicator nymphing the deschutes river during the salmon fly hatch so for that
- 1:16:35one i would take the elite indicator line there's actually a fun story behind
- 1:16:39that one if you if you've seen that line you know that it's white at the tip
- 1:16:43red in the middle and gray in the running line.
- 1:16:46When we first conceived of that line, we wanted to call it the elite bobber lobber.
- 1:16:51And we actually made it red and white to sort of evoke the classic bobber we
- 1:16:55probably all started fishing with.
- 1:16:57That's not not to disparage indicator nymphing like indicator nymphing is a
- 1:17:01totally legit and effective way to catch fish so much so that we designed that
- 1:17:05line specifically for that technique oh you're so you're so pc yet you're the
- 1:17:10same guy who made it red and white is it joke.
- 1:17:15No i fucking bought it ourselves mostly that's really
- 1:17:18what we were after with that but it's i mean it's an awesome
- 1:17:21line for for that technique it's got a long
- 1:17:24head so you can mend it way out into the river it's a
- 1:17:27couple sizes heavy so you can turn over a big heavy
- 1:17:30indicator rig you know if i'm fishing an indicator i'm fishing
- 1:17:33that line pretty much every time i've got two of those set up i got one on a
- 1:17:37uh seven weight one on an eight weight those are my summer steelhead bobber
- 1:17:41lobbers but now i just learned something now i can tell all the guys back in
- 1:17:45the shop why it's red and white yeah our marketing team chickened out on that
- 1:17:49one is what happened It was,
- 1:17:51we actually had it, we had it drawn up as the bobber lobber and I was like,
- 1:17:54man, this might not go over well with everybody,
- 1:17:57but I still love it. I think it's a fun name.
- 1:17:59Total sissies. People have a sense of humor, man. It's okay.
- 1:18:03All right. You're tarpon fishing in the Keys in May.
- 1:18:06Keys in May? Am I Oceanside or Backcountry? You're going to do a little bit
- 1:18:11of both in the same day. Same Rob.
- 1:18:14Bit of both i would take the elite tarpon line that's just
- 1:18:17a taper that's been dialed in for for tarpon for
- 1:18:20many many years our founder jim vincent was a
- 1:18:22huge tarpon angler and he started working on that line probably like three decades
- 1:18:27ago and we ended up at that taper i don't think we've made a better one since
- 1:18:31it's just a really nice balance between you know enough head length to carry
- 1:18:35some line but short enough that you can you can shoot a fly and get it in front
- 1:18:39of a moving fish pretty quickly.
- 1:18:41The reason I asked about backcountry versus oceanside is the clear floating
- 1:18:47lines that you mentioned earlier, that is where they are in their element is the oceanside.
- 1:18:53So super clear water, super spooky fish, big pods of them. In those scenarios,
- 1:18:58you do want that clear floating line advantage.
- 1:19:01What about baby tarpon? Baby tarpon, I really like the Flats Pro.
- 1:19:05If you're slinging flies up under mangroves, that
- 1:19:08kind of thing having a little bit heavier line i think
- 1:19:11is just helpful you know you're obviously going to have to shoot some line
- 1:19:14to get a fly back into the structure so having
- 1:19:17a little extra weight there is really helpful yeah and that flats pro doesn't
- 1:19:21run away on you as much as like you know more of a shooting head or a jungle
- 1:19:25it's a little bit more distance control i feel like yeah okay gt in chris consylum
- 1:19:32well we've actually we've got the elite gt line specifically for that species.
- 1:19:37I've not fished Christmas Island, but the coolest thing about the GT line,
- 1:19:42it's a taper that's made for GTs, of course, but the most unique feature on
- 1:19:46it now is actually a new style of welded loop.
- 1:19:50That I sort of started working on after a GT trip.
- 1:19:53I got this awesome opportunity to fish Seychelles for a week and actually saw
- 1:19:58some loop failures there, never just on a straight pole, but when GTs were running
- 1:20:03your line through structure.
- 1:20:04So we came back from that trip and kind of sat down, I scratched my head and
- 1:20:08said, how do you keep your loop from getting torn up on coral?
- 1:20:12And what we came up with is this really interesting Kevlar sleeve that actually
- 1:20:16goes right around the bend in your loop.
- 1:20:19So you can think of it as your loop is basically wearing a bulletproof jacket.
- 1:20:22So when your GT runs you out over the edge of the reef and goes straight down,
- 1:20:27instead of the loop catching on the coral and cutting through the core and losing
- 1:20:31your fish, hopefully that Kevlar is going to protect you from a break off there.
- 1:20:36Yeah, I didn't know that about the loops are different on that.
- 1:20:39That's good to know. I'll take one of those on my GT trip in February.
- 1:20:43What about bonefish, waiting for bonefish?
- 1:20:46Waiting for bonefish, you know, I really like the bonefish quick shooter if I'm going to be waiting.
- 1:20:52And the reason is when you're on the flight waiting, you often are coming across
- 1:20:56fish that are closer to you than if you're in a skiff.
- 1:20:58You know, if you're in a skiff, you're just seeing them farther off.
- 1:21:01Your shots are going to be a little bit more distant.
- 1:21:03Waiting, you get a lot of really like close up shots. So the Bonefish Quick
- 1:21:07Shooter, it's a full line size heavy,
- 1:21:09it's got a little bit shorter head, and that just helps you fire a cast off
- 1:21:13quickly at a near fish rather than carrying a bunch of line and getting it to a more distant fish.
- 1:21:20Yeah, I think that's a great suggestion. Those fish oftentimes pop up almost
- 1:21:24right under your nose there, especially if you're fishing in cloud cover,
- 1:21:28a lot of them are going to pop up.
- 1:21:29Just, you know, you know, 20 foot cast isn't unreasonable and you got to get
- 1:21:34that rod loaded and get it there as well.
- 1:21:37Well, I didn't get to all my questions, man. We're going to wrap her up with
- 1:21:40one last question. We just got a couple minutes here.
- 1:21:44If you had to set up one rod for trout, Western trout, I want to know the rod
- 1:21:50and the fly line to fish the rest of your life.
- 1:21:53This is it. This is all you get. What's it going to be?
- 1:21:57Oh that's a brutal question man
- 1:22:00i usually when i'm in my boat i've got like five rods strung
- 1:22:03up you know if i had to pick one i'm a
- 1:22:06huge fan of the nine foot five weight i just don't think there's a
- 1:22:09more versatile format out there to start with i
- 1:22:12really really like the r8 core you're mentioning peter
- 1:22:15knox before i was actually i spent a lot of time in a boat with peter here in
- 1:22:20eastern idaho when he was working on those rods i don't know if i had any influence
- 1:22:23on the outcome but I like the outcome it's a great rod highly versatile you
- 1:22:27know soft enough to to fish tiny dry flies and small if it's what line what
- 1:22:33line you're putting on it,
- 1:22:36the line, I would go probably gold XP. I think that's just the most widely applicable.
- 1:22:41Enough power to turn over a big fly if you need to, but also enough head length
- 1:22:45and delicacy to fish a small dry fly.
- 1:22:48Same. That gold XP is the ultimate utility rod.
- 1:22:51This has been absolutely awesome, Chris. I learned a ton. It's so refreshing
- 1:22:56to hear the engineers talk in fishing terms.
- 1:23:00They obviously know your craft. They know your trade.
- 1:23:02We appreciate you guys just building all the great product that you do in.