Latest / Red Talks / Episode 5: Electrical Safety: From Fragile to Future-Proof — The Evolution of IR Windows
Transcript
- 0:00SPEAKER_01: So we're trying to build this smart window solution.
- 0:02SPEAKER_01: So if you're going to punch a hole in there, let's future proof it where you can use multiple technologies.
- 0:08SPEAKER_01: So rather than just sticking a round crystal window in, we put large format windows in, we put NFC tags in them for identification and data management.
- 0:16SPEAKER_01: So that's where we're, as IRIS, listening to our clients and building, so we're future-proofing systems by making them a smarter unit that are multifunctional.
- 0:31SPEAKER_00: IR windows have been around for decades, but early designs had major limitations.
- 0:36SPEAKER_00: What were some of the biggest issues with traditional crystal IR windows?
- 0:40SPEAKER_00: And how did they impact safety and reliability?
- 0:43SPEAKER_01: Well, I mean, those early designs are still here.
- 0:46SPEAKER_01: 30 years later, you know, it's like so when I left the army, I started a condition, I got into thermography.
- 0:53SPEAKER_01: That was the thing I got into, and started doing a lot of work with facilities companies, uh, specifically on electrical systems, you know, looking at the cabin.
- 1:00SPEAKER_01: And one of the biggest hurdles we used to have was the removal of covers to facilitate the inspection, um, which was in most cases far more costly than the actual inspection itself.
- 1:11SPEAKER_01: The inspection might have been a couple of hours, but they're spending two days removing and replacing panels.
- 1:16SPEAKER_01: It was it was that crazy.
- 1:18SPEAKER_01: Um, and we were using back then calcium fluoride and barium fluoride windows, round window designs, two, three, and four inch, um, very, very expensive back in the day, much, much more expensive than they are today.
- 1:30SPEAKER_01: Um, so I started because of my service business, we started using windows and that, but then we started seeing them break, and um, you know, they were like calcium fluoride or fluoride-based crystals are very fragile.
- 1:42SPEAKER_01: Now, in the very early days when we were using shortwave or medium wave cameras, we were using sapphire windows.
- 1:48SPEAKER_01: Uh, very expensive again, but sapphire, super tough window.
- 1:51SPEAKER_01: I mean, that's you know, 2,000 newt part, and it's almost as hard as a diamond.
- 1:55SPEAKER_01: But it was a shortwave window that worked between three to five microns.
- 1:59SPEAKER_01: So when we started evolving into the long wave technology, you know, the 8 to 12, 8 to 14 micron cameras that we use today specifically, uh the sapphire windows just didn't work.
- 2:09SPEAKER_01: So then we went to fluorides, and then we, you know, fluoride windows, we noticed that the fluorides are hygroscopic, they get they absorb water over time, they cloud.
- 2:17SPEAKER_01: We can coat them, but um the coating this thing called modulus of rupture.
- 2:24SPEAKER_01: So the the crystal has a different modulus of rupture to a coating, so you get a natural frequency of vibration, and most things you know I mean.
- 2:31SPEAKER_01: So what you end up having is the crystal vibrates at one frequency and the coating vibrates at another frequency, and you get microcracking, and that lets water in, but it gets worse because it gets underneath the coating and traps it.
- 2:42SPEAKER_01: So we see massive failures on that.
- 2:45SPEAKER_01: So, you know, the windows were working, they alleviated the problem, but the windows were fragile and not really what we would call an incus, we called it industrial grade solution.
- 2:56SPEAKER_01: Um, hence I then started looking at other different types of lens type solutions, looked at polymers because I knew different polymers for PIRs and that they um they let infrared transmit at certain wavelengths.
- 3:12SPEAKER_01: I think I went through about 80 to 100 different types of polymer when I was doing it.
- 3:15SPEAKER_01: I was like a mad scientist in my garage going through this stuff, and I came up with a nice range of polymers that worked quite well.
- 3:23SPEAKER_01: Uh, unfortunately, they were opaque, so you couldn't do a visual inspection.
- 3:27SPEAKER_01: Um, but they didn't, they were uh, you know, they weren't hygroscopic and they weren't fragile, they were flexible like most plastics are.
- 3:35SPEAKER_01: Um, so I brought polymer windows into the market space, but then there were other issues where you know any polymeric materials used in visual viewing paints on in electrical equipment have to go through an impact test, cold impact test, um, and uh flammability test.
- 3:53SPEAKER_01: So the polymers are very flammable, so you would burn it and it would actually fail the flammability test, but they weren't designed for electrical systems.
- 4:00SPEAKER_01: Equally, you have to freeze it um, I think for three to four something anyway.
- 4:05SPEAKER_01: You have to freeze the lens, makes it very brittle, they drop a two-pound ball on it, and they always crack.
- 4:09SPEAKER_01: So the the test was mustn't crack, shatter, or dislodge, or mustn't catch fire or cause a secondary um ignition.
- 4:18SPEAKER_01: So flammable, inflammable doesn't mean things don't catch fire, they have 30 seconds to self-extinguish, and they mustn't drip, so they have cotton underneath the lens, and if it drips and the cotton catches fire, you failed because you mustn't cause a secondary ignition.
- 4:32SPEAKER_01: That's what a flammability, like a URL flammability test is.
- 4:35SPEAKER_01: So then I come up with a combination lens to give it some mechanical structure, um, patented it, and then I basically that's the VPT lens you see VPFR back then, but the VP lens system that we currently use.
- 4:51SPEAKER_01: Um the great thing about that lens system was it enabled me to do other things other than round windows.
- 4:59SPEAKER_01: So we used to have a campaign saying who said infrared windows has to be round.
- 5:02SPEAKER_01: So we I started making large format windows, um, and then I invested in finding clear polymers.
- 5:09SPEAKER_01: So we ended up with the you know that build a better mousetrap.
- 5:12SPEAKER_01: I had a lens that was visually clear now, that impact resistant, IP2X fail.
- 5:18SPEAKER_01: So it, you know, I designed that all of the failure modes of common crystal windows.
- 5:22SPEAKER_01: Um, but that being said, the crystal windows are still avidly used in the market.
- 5:27SPEAKER_01: It's that legacy mindset, very difficult to change.
- 5:30SPEAKER_01: We even sell crystal windows as much as it hate it, you know, and I know they're gonna fail.
- 5:35SPEAKER_01: We have no guarantees on our crystals because we know they're gonna fail.
- 5:38SPEAKER_01: We have unconditional lifetime warranty on polymers because they were designed not to fail.
- 5:43SPEAKER_01: Um, but yeah, that was a journey and a half, mate, is getting from the originals, and again, we still have these conversations on a daily basis.
- 5:54SPEAKER_00: Beyond just durability, what makes iris' IR windows a game changer for modern electrical maintenance strategies?
- 6:02SPEAKER_01: Uh an IR window is an IR window, it's just a very it's a singularity, it's a singular device.
- 6:07SPEAKER_01: Yeah, you can do visual inspections if it's visually clear.
- 6:11SPEAKER_01: Um but you know, I thought about it and I went, you know, it's um a lot of clients are very nervous about punching holes in their electrical equipment, you know, and I thought, well, really an infrared window should be more of an inspection system, no, so not just for visual or infrared.
- 6:33SPEAKER_01: So you know, the lens designs that we came up with, the polymers that I now developed, we can do ultraviolet inspections, vision inspections, and IR inspections multi-spectral wavelengths, so long way, short way, midway.
- 6:46SPEAKER_01: Equally, then I patented a system where we added ultrasound sensors, so then we can do partial discharge or PD inspections through the same port.
- 6:57SPEAKER_01: Now we've we're now bringing out our re-century system, which is an online you know, uh sensor that actually measures internal, external temperature, humidity, ultrasound, etc.
- 7:07SPEAKER_01: So we're trying to build this smart window solution.
- 7:10SPEAKER_01: So if you're gonna punch a hole in there, let's future proof it where you can use multiple technologies.
- 7:16SPEAKER_01: So rather than just sticking around crystal window in, we put large format windows in, we put NFC tags in them for identification and data management.
- 7:24SPEAKER_01: So that's where we're as iris listening to our clients and building, so we're future-proofing systems by making them a smarter unit that are multifunctional.
- 7:35SPEAKER_01: So we know our customers have bought cameras, we know they've got ultrasound equipment, we know they've got partial discharge test equipment, but now the iris inspection system, I don't even like to call it an infrared window anymore because that just pigeonholes it.
- 7:48SPEAKER_01: You know, this is an inspection system that if you're gonna put a hole in your panel, you want to get as much out of it as you can, and it needs to be future-proof that it's gonna not work to just a day, but the same thing in 20 years' time.
- 7:59SPEAKER_00: How do inspection windows improve the resilience of a facility?
- 8:02SPEAKER_01: Well, like COVID when when COVID hit, it just showed us just how um reliant we were on external resources, yeah.
- 8:13SPEAKER_01: So, you know, a lot of customers were um contracting out a lot of their maintenance, a lot of their inspection work, etc.
- 8:21SPEAKER_01: Um, so again, when that went away and they couldn't get people in, they thought, well, let's use cameras and ultrasound equipment SLs to do the inspections.
- 8:30SPEAKER_01: But they then recognized that actually I can't do an infrared, no matter what the movies show me, I can't do an infrared image for a solid door.
- 8:39SPEAKER_01: You know, I have to open the door, but I don't have the people here to open the door because we're not task qualified.
- 8:46SPEAKER_01: So then it was like they they did the best they could with the equipment that they had on hand, but when we started coming out of it, it was like, well, we can design our systems, our equipment, our assets that they're more user-friendly to condition monitoring inspections.
- 9:02SPEAKER_01: Hence, we, you know, if you look at IRS, we've tripled in size in in just under three years because of issues like this, because now people are recognising hang on a minute, this is important.
- 9:14SPEAKER_01: We need to design our assets, that we can we can look after it, and we have a resilience to any other outside external influences such as a pandemic or a weather event or anything else.
- 9:27SPEAKER_01: We can take care of our assets.
- 9:30SPEAKER_01: So now with their resilience planning, they're using that that's iris's game.
- 9:34SPEAKER_01: I mean, if you look at it, I think we should one of the odds should be resilience, you know, because that's what we're doing with our clients.
- 9:41SPEAKER_01: We are giving them the freedom to be able to inspect fully energized online assets at any time with any skill set.
- 9:51SPEAKER_01: Yeah, it doesn't get any more resilient than that.
- 9:54SPEAKER_00: What are the technical benefits of opting for custom panel covers?
- 9:57SPEAKER_01: Well, I mean, the round windows are limited on field of view.
- 10:01SPEAKER_01: So we we have a system called Flex IR, which is we we actually make complete panel covers, which is an inspection.
- 10:07SPEAKER_01: Again, another pattern we have.
- 10:09SPEAKER_01: So I painted the Flex IR system that we take a cover, you know, be it whatever type of cover on a bus bar, switch gear, whatever, and we build it into we make it a window.
- 10:20SPEAKER_01: So for instance, if you look at a dry front, a dry type transformer, you know, you have a cover on the front of it, six bolts typically.
- 10:28SPEAKER_01: Um, you take that off, if you you could drop it in, you could cause an accident, etc.
- 10:33SPEAKER_01: So what we do is we actually do a complete dry front transformer cover that has an embedded sensor, the window's already in it, so the actual cover is a window.
- 10:43SPEAKER_01: So you unbolt that six bolts and then you just put a new cover on there.
- 10:47SPEAKER_01: Done.
- 10:48SPEAKER_01: So the installation time is minutes.
- 10:50SPEAKER_01: So the custom covers we've seen a marked uptake on that because obviously people have limited shutdowns, limited time.
- 10:58SPEAKER_01: You're cutting in windows and things like that.
- 11:00SPEAKER_01: It does take time, but if you're just replacing covers, it takes minutes.
- 11:05SPEAKER_01: So you can do probably 10 times more installations by just ordering a whole bunch of custom covers, and typically you save money on installations, you know, because it again a lot of people uh subcontract those installation work, um, and you've got multiple teams doing multiple installations and in the game because they want to do as much as possible.
- 11:26SPEAKER_01: So this is just a much better, much smarter way of working.
- 11:30SPEAKER_00: What are the financial benefits of choosing custom panel covers?
- 11:34SPEAKER_01: Um, a lot of OEMs buy a lot of the custom covers already pre-built, goes out of the factory, and those have been predetermined by clients that we've we've worked with in the past.
- 11:43SPEAKER_01: So they'll do a spread of solutions, so they'll have some round windows, they'll have some standard square or rectangular windows, and they'll have some custom covers.
- 11:52SPEAKER_01: But the important thing is they all use the same lens system, so from a usage standpoint, they're all identical.
- 11:57SPEAKER_01: Um, but it does it does bold down to the a custom window could probably be 20 to 30 percent more than a window of its size, but it saves you all the installation time.
- 12:12SPEAKER_01: But equally, um, if you for instance want to do uh the front, I've seen fronts of SwitchGo where they've got 12 round windows on there, yeah.
- 12:22SPEAKER_01: Well, we do two custom covers, and they're actually probably 60% of the cost of the round windows, excluding installation.
- 12:30SPEAKER_01: So people I've seen some pieces of equipment looks like bloody Swiss cheese, you know.
- 12:35SPEAKER_01: I mean, there's so many windows all over it.
- 12:36SPEAKER_01: Um, whereas they could have just designed one simple large format window.
- 12:40SPEAKER_01: So, again, another adage you can look at is if you look at a piece of switch gear, they typically have large uh rectangular windows because people need to look out, look at for disengagement of blade switches to make sure it's de-energized, they can do an inspection through the window, but it's big for a reason.
- 12:57SPEAKER_01: They need to get their head in there and the lamp, like a torch or a flashlight, whichever part of the world you come from.
- 13:03SPEAKER_01: You know what I mean?
- 13:04SPEAKER_01: But they've got to look inside there.
- 13:05SPEAKER_01: So the large format windows, the big plexiglass windows we've been using for years.
- 13:10SPEAKER_01: What drove that was because you need to see everything.
- 13:12SPEAKER_01: Now you've got a small round window, what are you gonna see?
- 13:16SPEAKER_01: It's not a lot, you know, and they've got all these neat solutions, but you you can't get this and a flashlight into a small round window where the large formats give you much more flexibility in in the inspections that you need to do.
- 13:28SPEAKER_00: Looking ahead, what's next for IR window technology?
- 13:31SPEAKER_00: And how do you see Iris continuing to push the industry forward?
- 13:35SPEAKER_01: Well, the window designs, as sort of alluded to before, it's for instance, we've just brought out a range of uh it's called the HT range, but they're designed for boilers and refractories in oil and gas.
- 13:48SPEAKER_01: Um, to s for a specific requirement, you know, we and it's more about sustainability, carbon footprint reduction.
- 13:56SPEAKER_01: Every time they open a boiler window, it just sucks in there, and the the burners go all over the place, and it's it's just you know, using way, way too much gas, it's overcooling or undercooling.
- 14:07SPEAKER_01: The you get localized cooling where you need to inspect, and you get overheating in another part.
- 14:12SPEAKER_01: So it's just a really inefficient way of doing it.
- 14:14SPEAKER_01: So we built these windows to solve that problem for clients.
- 14:19SPEAKER_01: So Iris will always have that you know, custom design, boutique design element.
- 14:24SPEAKER_01: We have designers and we do site walks, is uh another big thing we're doing where we're going out to the clients, walking around the site, looking at the actual equipment, making the correct recommendation on the type of unit they should be looking at, which involves you know, that gets away with all the you know, probably 90% of the installations I go and see, especially from OEMs in the past, that the windows have been in places that you can't use them, they're the wrong size, wrong place, totally ineffective.
- 14:53SPEAKER_01: But that's because the OEMs were just told to put an infra window in, they weren't told what type, where, how, it was just infra window that was on the spec, click, tick, done, and and they're out the door.
- 15:03SPEAKER_01: So typically, when I see large orders for two-inch round windows, it's because someone doesn't know what they're doing, typically.
- 15:09SPEAKER_01: Yeah, I know you shouldn't sort of bolt thing, but that's the typical thing on this.
- 15:14SPEAKER_01: So we see that the boutique solutions that we offer in Iris, the custom design products alignments, the expansion of building smart windows where we're now building IoT NFC-based tag solutions into all of our products.
- 15:31SPEAKER_01: So now you've got constant monitoring of the equipment, and if you get an alarm, let's say an over-temperature alarm on an ambient because it's climbing up, the window gives you the element that you can go and physically check what's going on before you shut down.
- 15:45SPEAKER_01: So I always align it to like my office here.
- 15:48SPEAKER_01: I've got smoke detectors and uh I've got sprinklers.
- 15:53SPEAKER_01: Yeah.
- 15:53SPEAKER_01: Now, if the sprinklers went off every time the smoke detector went off, we'd have problems.
- 15:59SPEAKER_01: Yeah.
- 15:59SPEAKER_01: But the sprinklers have their own heat detectors.
- 16:02SPEAKER_01: So I have my smoke detector's going on and the sprinkler picks up heat and one of the files bursts in there because it's overheating.
- 16:09SPEAKER_01: There's a logic to that.
- 16:10SPEAKER_01: If you've got smoke and heat, I got fire.
- 16:14SPEAKER_01: Yeah?
- 16:15SPEAKER_01: So with regards to inspection windows, they are that secondary line of confirmation.
- 16:21SPEAKER_01: So, you know, you get an alarm from a sensor, you go and see what's going on, you physically look in, you can actually tell what's going on, and then the engineer can make an um educated decision based on saying, well, that's yeah, that's close to where we need to be.
- 16:37SPEAKER_01: We're gonna have to book this in, we need to get some load.
- 16:40SPEAKER_01: You know, we can start to do things because the last thing you want to do is shut things down.
- 16:45SPEAKER_01: So again, the window is an extension of um of the operator or end user.
- 16:51SPEAKER_01: It was like uh I was on a thing, uh, one of the committees I said it was like a sort of a round table I was sitting on, and a young lady there, um she's a data scientist, and they asked her, you know, is AI gonna take over?
- 17:09SPEAKER_01: You know, is you know, you know, big gen, big data gonna take over.
- 17:14SPEAKER_01: And she went, no.
- 17:15SPEAKER_01: She goes, we're always gonna need people, but she goes, I think AI assisted people will take over people.
- 17:23SPEAKER_01: So we're we're in that transition phase.
- 17:25SPEAKER_01: So what Iris is trying to do is be that AI assisted element to people, so we give them the safe access to equipment anytime they want to do it, but we're monitoring it for them as well, so we're watching their back.
- 17:38SPEAKER_01: So that's that's where Iris is going with uh eCentry systems and eCentry connect and added to our windows and the training.
- 17:46SPEAKER_01: Um, there's there's a myriad of things we're doing really, but it's all aligned to the same same goal, and that's really just managing assets in a much more effective, cost effective way.
- 17:56SPEAKER_00: Red Talks features voices driving safety, reliability, and innovation forward in the industrial world.
- 18:03SPEAKER_00: If your work challenges the status quo, we'd like to hear from you.
- 18:07SPEAKER_00: Learn more at redtalk.comslashabout.