Latest / Gun Talk / Gunsmith Nightmares With Brownells’ Caleb Savant | Gun Talk Nation
Transcript
- 0:00Speaker 1: A live round comes out of the gun. And then
- 0:04Speaker 1: he doubles down and gets mad at me for questioning
- 0:08Speaker 1: that it was unloaded. And he's, I checked it in
- 0:12Speaker 1: the parking lot. I don't know how that got in there.
- 0:18Speaker 2: I'm Ryan Gresham. And this... This is Gun Talk Nation.
- 0:32Speaker 3: Gun Talk Nation is brought to you by Ruger, Leupold,
- 0:36Speaker 3: Savage Arms, Shooting Sports Life, and Remington Ammunition.
- 0:41Speaker 2: Hey, welcome into Gun Talk Nation.
- 0:43Speaker 3: Today on Gun Talk Nation, we're gonna talk about gunsmith
- 0:45Speaker 3: nightmares with our buddy Caleb Savant from Brownells.
- 0:49Speaker 2: Caleb, welcome in, man.
- 0:50Speaker 1: Yeah, thanks for having me. It's good to be back.
- 0:52Speaker 3: Man, so you are, you are or were a gunsmith
- 0:58Speaker 3: type guy, something like that, right?
- 1:01Speaker 1: Yeah, something like that. Titles change all the time.
- 1:06Speaker 2: But been with Brownells for a good number of years now, huh, man?
- 1:09Speaker 1: Yeah, I'm at eight years right now.
- 1:12Speaker 2: And obviously, you know, Brownells, everybody knows Brownells.
- 1:16Speaker 3: They're the gunsmithing supply guys, and they do a bunch
- 1:19Speaker 3: of other things. That was kind of what they were
- 1:22Speaker 3: known for for a long time, but they've expanded, and
- 1:24Speaker 3: you guys do everything now.
- 1:25Speaker 1: So....
- 1:27Speaker 3: Being that this episode, this time of year, we're kind
- 1:30Speaker 3: of like getting into the gunsmithing nightmares, because I think
- 1:33Speaker 3: everybody has those stories of like, you know, let's be frank,
- 1:39Speaker 3: problems with gunsmith. You drop off your gun, it either
- 1:43Speaker 3: takes forever, is the job done right, whatever.
- 1:47Speaker 2: I've got stories, you've got stories.
- 1:48Speaker 3: So, I mean, I wanted to kind of start off with,
- 1:52Speaker 3: when I say gunsmith nightmares, what comes to mind?
- 1:56Speaker 1: Yeah, so... I mean, they could be either related to
- 2:00Speaker 1: the actual gunsmith and the work they're doing, or it
- 2:03Speaker 1: could also be related to the customer, because there's some
- 2:06Speaker 1: customer nightmares out there as well.
- 2:07Speaker 2: It goes both ways.
- 2:08Speaker 1: It goes, oh man, it swings way far both ways.
- 2:12Speaker 2: I mean, I go to all these different gun companies, right?
- 2:14Speaker 3: And I go to their factories and I hear about,
- 2:16Speaker 3: you know, talk to their customer service guys. I love
- 2:18Speaker 3: customer service because they always have the crazy stories. And
- 2:22Speaker 3: I mean, you go to any major gun company, especially
- 2:27Speaker 3: like handguns, I think.
- 2:29Speaker 2: And I'll say, all right, tell me about how many guns.
- 2:33Speaker 3: That have been sent to you in a Ziploc bag
- 2:35Speaker 3: of like, the whole thing is just parts.
- 2:37Speaker 2: He's like, dude, this is like weekly.
- 2:39Speaker 3: Like, please, I tried to do a full field strip
- 2:45Speaker 3: and I can't get it back together.
- 2:46Speaker 2: Yep.
- 2:47Speaker 1: I've seen that way too many times. Or my favorite
- 2:49Speaker 1: is my buddy took this apart or my girlfriend took
- 2:51Speaker 1: this apart. Yeah. And it's like, really? Come on.
- 2:54Speaker 2: Yeah. Your girlfriend.
- 2:56Speaker 1: Yeah.
- 2:56Speaker 2: Your girlfriend really wanted to disassemble your gun. I doubt it.
- 3:00Speaker 1: Yeah, I know. But I've heard it.
- 3:02Speaker 3: Do you think people should do a full field strip,
- 3:06Speaker 3: you know, a full disassembly of a gun? Or would
- 3:10Speaker 3: you lean towards most times it's not needed?
- 3:13Speaker 1: So most times it's really not needed. If you shoot
- 3:16Speaker 1: a lot, you should do a complete like 100% strip.
- 3:20Speaker 1: I say roughly like once a year to clean everything.
- 3:23Speaker 1: If you're not comfortable doing that, you should bring it
- 3:25Speaker 1: to a gunsmith to have that done at least once
- 3:28Speaker 1: a year. And that's if you shoot a lot, right?
- 3:31Speaker 1: Or if, you know, something crazy happened, your gun went
- 3:33Speaker 1: underwater or something like that, which in Louisiana, we've seen
- 3:37Speaker 1: quite a bit of that.
- 3:38Speaker 2: Yeah.
- 3:40Speaker 1: But yeah, it's not, in most cases, it is absolutely
- 3:43Speaker 1: not necessary. Just a basic field strip is all you need.
- 3:46Speaker 3: So, all right, you said you got stories. Just hit
- 3:50Speaker 3: me with one. Gunsmithing nightmares.
- 3:52Speaker 2: What's up?
- 3:53Speaker 1: Oh, man. Okay, so I'm pretty sure we're all familiar
- 3:57Speaker 1: with what a lathe is, a metalworking lathe. When you're
- 4:01Speaker 1: threading a barrel, there's something on the lathe called a
- 4:03Speaker 1: lead screw, right? When you engage that lead screw, the
- 4:07Speaker 1: tooling portion starts moving towards the chuck portion until you
- 4:12Speaker 1: turn it off. And if you don't turn it off,
- 4:14Speaker 1: it will crash. And when it crashes, it's bad because
- 4:19Speaker 1: you have this giant chunk of metal two giant pieces
- 4:22Speaker 1: of very heavy metal moving towards each other with a
- 4:24Speaker 1: lot of torque. And yeah, so there was, I'm not
- 4:30Speaker 1: saying it's only a new gunsmith problem, but we had
- 4:34Speaker 1: this grizzly gunsmithing lathe and this new gunsmith claimed he
- 4:39Speaker 1: was great at threading barrels, which I mean, I'm sure
- 4:42Speaker 1: he was, I'm sure he is now, but he engaged
- 4:46Speaker 1: the lead screw, he was cutting the threads, he backed
- 4:50Speaker 1: off the tool, but didn't engage the lead screw. So
- 4:54Speaker 1: the tool is no longer cutting the barrel, but it's
- 4:56Speaker 1: still moving towards the chuck. And he, I guess, went
- 5:00Speaker 1: to check his notes or his measurements or something. And
- 5:03Speaker 1: next thing you know, they crashed. And lathes are very expensive.
- 5:09Speaker 1: I'll tell you what happened. So the actual lead screw
- 5:11Speaker 1: that runs on it, that bent, like bent really bad.
- 5:16Speaker 1: And then all the gears inside, like the drive train
- 5:18Speaker 1: and stuff was all stripped out. The chuck had a
- 5:21Speaker 1: big piece missing off of it. The tool holder was
- 5:24Speaker 1: just gone. It was just, the chuck hit it and
- 5:26Speaker 1: just like ripped it into the lathe. And yeah, that was,
- 5:30Speaker 1: it was, fortunately he didn't get injured at all, but
- 5:33Speaker 1: it was, I mean, it's absolutely crazy. Lathes are so dangerous.
- 5:37Speaker 1: You can't, He's lucky that he, like, it was just
- 5:42Speaker 1: the lathe that he left going and he didn't get
- 5:44Speaker 1: sucked into it somehow from not paying attention because there's
- 5:48Speaker 1: some nightmare story. Fortunately, I've never had to witness any
- 5:51Speaker 1: of that. But yeah, lathes are a pretty deadly machine
- 5:54Speaker 1: to leave unattended for even a second.
- 5:56Speaker 2: Yeah, I mean, they're cutting steel. Things cutting steel. Yeah.
- 6:01Speaker 2: So I guess it destroyed the lathe, right?
- 6:03Speaker 1: Yeah, that lathe was ruined. They had to get someone
- 6:06Speaker 1: to come in and work on it. They ended up
- 6:08Speaker 1: changing out a bunch of parts. It was like, I
- 6:10Speaker 1: don't remember the exact price, but it was close to
- 6:12Speaker 1: the cost of just buying a new lathe. It was bad.
- 6:16Speaker 2: Yeah. You mentioned threaded barrels.
- 6:19Speaker 3: That seems like a simple enough task, but certainly there's
- 6:25Speaker 3: nightmares of like, you say, go thread my barrel, and
- 6:28Speaker 3: now if it's not done right, I mean.
- 6:31Speaker 2: It's totally... not done right.
- 6:35Speaker 1: Yeah.
- 6:35Speaker 2: Yeah.
- 6:35Speaker 1: You can take metal off. Taking metal off is really easy.
- 6:39Speaker 1: Putting metal back on is pretty tricky.
- 6:41Speaker 2: It's kind of a problem.
- 6:42Speaker 1: Yeah.
- 6:43Speaker 3: I was thinking about even simple stuff. I mean, I
- 6:46Speaker 3: remember we were busy and we've got all this stuff
- 6:49Speaker 3: going and this is kind of in our old office.
- 6:51Speaker 3: We didn't have as like our big work bench and
- 6:54Speaker 3: all the stuff we have here now. But we had
- 6:56Speaker 3: we were doing a segment about gun sights, you know,
- 7:00Speaker 3: swapping out your your iron sights on a handgun. and
- 7:03Speaker 3: we had settled that we needed to put on guns,
- 7:06Speaker 3: and didn't have time to deal with it. We brought
- 7:07Speaker 3: it to a local gun shop, and they do some
- 7:11Speaker 3: basic work, and we get it back, and the front
- 7:14Speaker 3: sight is at about a 30 degree, and it's not,
- 7:19Speaker 3: it's like bent, it's like they took a frickin' ball-peen
- 7:22Speaker 3: hammer to it. I'm going like, okay, do you turn
- 7:25Speaker 3: your head, or do you turn the gun to hit stuff?
- 7:27Speaker 2: I mean, it was.
- 7:29Speaker 3: Not a straight up and down vertical front sight post anymore.
- 7:33Speaker 1: Yeah, that's, oh man, I've seen a lot of that,
- 7:35Speaker 1: especially with like the Sig sights or the Springfield XD
- 7:39Speaker 1: sights because on the front sight, the actual dovetail is
- 7:43Speaker 1: really small and then you have a lot of sight
- 7:46Speaker 1: sticking up out top. So it's very tempting for a
- 7:49Speaker 1: gunsmith to like actually try and push the sight rather
- 7:51Speaker 1: than push that dovetail base. And so sight work, I'll say,
- 7:57Speaker 1: sight work is interesting because it's one of those things
- 8:00Speaker 1: where it's really easy to do it right But it's
- 8:03Speaker 1: also really easy to mess it up. And when you
- 8:05Speaker 1: mess it up, you mess it up. I mean, it's
- 8:08Speaker 1: one slip and the sight's done, you know?
- 8:10Speaker 3: Yeah, I mean, the sights are kind of, I mean,
- 8:13Speaker 3: depending on the sights, they can be kind of fragile,
- 8:15Speaker 3: especially a front sight.
- 8:16Speaker 1: Yeah, and very expensive, like tritium sights.
- 8:19Speaker 2: I'll share one with you.
- 8:20Speaker 3: And this wasn't, this was some home gunsmithing. This wasn't
- 8:24Speaker 3: like bring it to a gunsmith, which maybe that was
- 8:26Speaker 3: the problem.
- 8:26Speaker 1: Oh, that's my favorite kind.
- 8:29Speaker 3: AR triggers can be easy to install. Oh, it's a
- 8:32Speaker 3: drop-in trigger, except when maybe it's for like a pistol
- 8:38Speaker 3: caliber AR that has a different system altogether. And it
- 8:41Speaker 3: sort of works, it's sort of an AR trigger, but
- 8:43Speaker 3: there's some fitment, which I've learned, Caleb, when people say fitment,
- 8:48Speaker 3: I start getting itchy.
- 8:50Speaker 2: I'm like, whoa, whoa, whoa.
- 8:52Speaker 3: So are we doing, we're doing projects now? We're bringing
- 8:54Speaker 3: out files and taking away metal to make a trigger
- 8:57Speaker 3: fit in a gun.
- 8:58Speaker 2: And perhaps.
- 9:01Speaker 3: I may have seen, luckily the gun was pointed in
- 9:05Speaker 3: a safe direction. They hit the bolt release on this
- 9:08Speaker 3: AR style platform. Bolt goes forward to chamber around. Gun
- 9:15Speaker 3: starts shooting in full auto without anyone pulling the trigger.
- 9:19Speaker 2: That's a problem.
- 9:20Speaker 1: That's certainly a problem. That's a big problem.
- 9:24Speaker 3: Luckily, I think there were only a few rounds in
- 9:26Speaker 3: the mag, so it kind of went bup, bup, bup,
- 9:28Speaker 3: and then it was like, whoa.
- 9:29Speaker 2: And it went into the berm. Yeah. no harm, no foul.
- 9:32Speaker 3: But yeah, I would caution people of getting too cute
- 9:36Speaker 3: with trigger assembly stuff.
- 9:39Speaker 2: And what do you think?
- 9:39Speaker 1: Yeah, I would too. And that, like that happening is
- 9:43Speaker 1: something that could have easily been avoided with a function check,
- 9:48Speaker 1: you know, because that's something that isn't unique to just
- 9:51Speaker 1: having rounds in the gun. You could have discovered that
- 9:53Speaker 1: with a basic function check, you know, drop the bolt,
- 9:56Speaker 1: the hammer went forward, like, okay, this is a problem.
- 9:58Speaker 2: Yeah.
- 9:59Speaker 1: And in thing i like to do any kind of
- 10:01Speaker 1: anytime i do any kind of trigger or safety work
- 10:04Speaker 1: i'll actually take the gun and bang the buttstock on
- 10:07Speaker 1: the ground and try and get that trigger to fail
- 10:10Speaker 1: or that safety to fail. And if it has to
- 10:14Speaker 1: pass that test, like that's the basic safety test it
- 10:17Speaker 1: needs to pass.
- 10:18Speaker 2: Absolutely.
- 10:19Speaker 3: A gun should not go off because you dropped the gun, period,
- 10:22Speaker 3: the end. That's an unsafe situation.
- 10:24Speaker 2: It shouldn't happen.
- 10:25Speaker 1: That's it.
- 10:26Speaker 2: That's it.
- 10:27Speaker 1: Exactly.
- 10:27Speaker 2: Yeah. All right.
- 10:28Speaker 3: We'll be back with more Gunsmith Nightmare Stories. Need to
- 10:34Speaker 3: get on target fast? The new LCO Pro F2 Red
- 10:37Speaker 3: Dot from Leupold was built for exactly that. Its true
- 10:41Speaker 3: one-power design and wide field of view helps you find
- 10:44Speaker 3: targets quickly.
- 10:45Speaker 2: Four selectable reticles are available.
- 10:47Speaker 3: To match your mission or shooting style. Add crystal clear glass,
- 10:51Speaker 3: 20 daylight, and 10 night vision illumination settings, and you've
- 10:55Speaker 3: got a red dot that's ready for anything. Learn more
- 10:59Speaker 3: about the.
- 10:59Speaker 2: New LCO Pro F2 at Leupold.com.
- 11:04Speaker 3: The Ruger LCP Max is still one of the most
- 11:07Speaker 3: popular pocket-sized personal protection pistols, and they just made it
- 11:11Speaker 3: better with the Magpul Enhanced Handgun Grip. So this one
- 11:14Speaker 3: is the LCP Max with Magpul EHG. Has nice texture,
- 11:19Speaker 3: has a little bit bigger grip module on it, so
- 11:22Speaker 3: you can get a little bit more grip on the gun.
- 11:24Speaker 3: Has a 13-round magazine, also a 10-round magazine. So it's
- 11:29Speaker 3: just been enhanced a bit. Still small, still easy to shoot.
- 11:33Speaker 3: and still very reliable as a Ruger.
- 11:36Speaker 2: So go check it out.
- 11:37Speaker 3: The Ruger LCP Max with Magpul EHG. Your new favorite
- 11:42Speaker 3: TV channel is here, Shooting Sports Life, the first and
- 11:45Speaker 3: only TV channel dedicated to the shooting sports. It's a
- 11:49Speaker 3: destination for enthusiasts who push the limits of skill, athletes
- 11:53Speaker 3: and public figures who share a genuine passion for the sport,
- 11:56Speaker 3: and creators who truly live life on the range. To
- 12:00Speaker 3: learn more about how to watch Shooting Sports Life, go
- 12:03Speaker 3: to shootingsportslife.com. It's a free, live, 24-7 TV channel available
- 12:10Speaker 3: for streaming apps and also on your smart TV. And
- 12:13Speaker 3: you can learn more on how to watch it at shootingsportslife.com.
- 12:16Speaker 2: All right, Caleb, I.
- 12:19Speaker 3: Got one for you, which is always fun. One of
- 12:22Speaker 3: my favorite things, and it is a DIY thing that
- 12:26Speaker 3: people can do, is stippling your own polymer pistol Get
- 12:33Speaker 3: your polymer pistol out. You can customize the stippling. I
- 12:37Speaker 3: want a little different look, a little different pattern. I
- 12:40Speaker 3: want more grip here, a little bit more aggressive texture.
- 12:43Speaker 3: When it's done right, it's super impressive. People do it
- 12:46Speaker 3: and you're going, man, that's awesome.
- 12:48Speaker 2: It looks cool. It's very functional. But when it's done wrong.
- 12:53Speaker 3: Somebody got a little lazy with the soldering iron and
- 12:57Speaker 3: you can ruin a grip.
- 12:59Speaker 1: Yeah. And most of the time, those grips are the
- 13:02Speaker 1: frame on a lot of your polymer guns. And there's
- 13:05Speaker 1: a very fine line between good stippling and just atrocious stippling.
- 13:10Speaker 1: Because it's one of those things that just requires patience
- 13:14Speaker 1: and attention to detail. If you don't have either one,
- 13:17Speaker 1: you have no business stippling a gun.
- 13:19Speaker 2: That's a good way to put it.
- 13:20Speaker 1: Yeah.
- 13:20Speaker 2: Take your time. Don't be in a rush.
- 13:23Speaker 3: And it's one of those things that it does just
- 13:27Speaker 3: take time to do it right.
- 13:28Speaker 1: It really does. It's easy to do, but it just
- 13:32Speaker 1: requires so much time and patience. Yeah. And especially this
- 13:36Speaker 1: day and age and the short form content absorption age,
- 13:40Speaker 1: you know, a lot of us don't have that.
- 13:43Speaker 2: Don't watch Instagram Reels while you're doing it.
- 13:47Speaker 1: No, don't watch anything.
- 13:48Speaker 2: What else has happened that you've seen out there?
- 13:51Speaker 1: Man, so another kind of favorite thing to get, I
- 13:55Speaker 1: say favorite, I use the term favorite very loosely here,
- 13:58Speaker 1: but another favorite thing to get is whenever someone brings
- 14:01Speaker 1: in a gun and they say it's from another gunsmith
- 14:05Speaker 1: that worked on it. And like the first question I
- 14:10Speaker 1: have is, okay, did you, obviously you're here with the gun,
- 14:13Speaker 1: so you're not happy with the quality of the work, okay?
- 14:17Speaker 1: Did you talk... to the gunsmith, most of the time
- 14:21Speaker 1: they say no, but sometimes it's like, yes, I did,
- 14:25Speaker 1: but they're not willing to make it right. And it's like, okay,
- 14:27Speaker 1: well now that sucks, right? But a perfect example of that,
- 14:32Speaker 1: I had someone bring a gun in, they were getting
- 14:34Speaker 1: their AR barrel pinned and welded as a 14 and
- 14:36Speaker 1: a half inch barrel. And the gunsmith, I also use
- 14:42Speaker 1: that term loosely in this scenario.
- 14:44Speaker 2: With big finger quotes, gunsmith.
- 14:46Speaker 1: Gunsmith, right? He was drilling the hole in the threads
- 14:50Speaker 1: for the pin. And just to kind of give you
- 14:54Speaker 1: an idea here, the way to do that is to
- 14:57Speaker 1: take the muzzle device, drill a hole in that first,
- 15:02Speaker 1: screw it on with torque and everything, like it's going
- 15:06Speaker 1: to be on the barrel. Then you go in with
- 15:08Speaker 1: a drill bit and you gently kiss the threads of
- 15:11Speaker 1: the barrel through the muzzle device. That's the right way
- 15:15Speaker 1: to do it. And then you unscrew your muzzle device.
- 15:17Speaker 1: You know, you can check to work, put it back on,
- 15:19Speaker 1: drop the pin in, weld it, and you're done. Where
- 15:24Speaker 1: a lot of gunsmiths, when this gets done wrong, you
- 15:27Speaker 1: know that they didn't follow that process because they probably
- 15:30Speaker 1: screwed on the muzzle device and they were just going
- 15:32Speaker 1: to guess how deep they needed to go. Maybe they
- 15:35Speaker 1: measured the thickness of the muzzle device and just didn't
- 15:37Speaker 1: read the depth right. I don't know. But they just
- 15:40Speaker 1: punched the hole right through the barrel. So you got
- 15:43Speaker 1: a hole going through the muscle device, through the threads
- 15:45Speaker 1: and coming out the rifling.
- 15:47Speaker 2: I bet that gun shot a little differently after that.
- 15:50Speaker 1: It was, yeah. So it was key holing. The customer
- 15:53Speaker 1: didn't even know. So the gunsmith just kind of put
- 15:57Speaker 1: a pin in, welded it and was like, here you go.
- 16:00Speaker 1: Hope you never notice. But yeah, so the last bit
- 16:04Speaker 1: of that input that the barrel had on the bullet
- 16:07Speaker 1: was a hole in the barrel, right? So the gun
- 16:09Speaker 1: was key holing.
- 16:10Speaker 2: Yeah.
- 16:11Speaker 1: And the customer looks at it and he's like, man,
- 16:13Speaker 1: what's going on here? Did a little bit of closer
- 16:15Speaker 1: inspection and realized that there was a hole going through
- 16:19Speaker 1: the barrel.
- 16:21Speaker 3: And that, when you think about it, it's already a
- 16:23Speaker 3: 14 and a half inch barrel.
- 16:25Speaker 2: Because I'm thinking, well, how do you fix that?
- 16:27Speaker 3: You're going to have to cut the barrel off, re-crown it,
- 16:30Speaker 3: re-thread it, redo the whole thing. But then now your
- 16:32Speaker 3: barrel is... You can't get up. I mean you gotta
- 16:35Speaker 3: find a muzzle device. That's like four inches long. Like
- 16:37Speaker 3: what are we doing here?
- 16:38Speaker 1: Yeah, that's literally the only other thing to do So
- 16:40Speaker 1: the easiest thing to do in this scenario is just
- 16:42Speaker 1: replace the barrel. Yeah, especially nowadays ar-15 barrels are so
- 16:46Speaker 1: many people making them You're gonna spend less time Or
- 16:51Speaker 1: you spend less money Making or just installing a new
- 16:54Speaker 1: barrel then you will putting in machine time to cut
- 16:57Speaker 1: and thread a new barrel Which so it was an
- 16:59Speaker 1: easy fix But the gunsmith just, I don't know, he
- 17:05Speaker 1: just sent it out the door. He said, you know,
- 17:07Speaker 1: they'll never notice and send it out, so.
- 17:09Speaker 2: Welcome to good enough gunsmithing.
- 17:12Speaker 3: Also, that's a good reminder for people that barrels are consumables. And,
- 17:17Speaker 3: you know, the whole we're going to shoot out a barrel, like,
- 17:20Speaker 3: then you just get a new barrel.
- 17:21Speaker 2: Like, it's okay. It's like tires on a car.
- 17:24Speaker 3: I mean, you just go get a new barrel, swap
- 17:27Speaker 3: it out. Either you can do it or you can
- 17:28Speaker 3: get a gunsmith to do it.
- 17:31Speaker 2: Yeah, that's a bad one, though. Jeezum.
- 17:33Speaker 1: Yeah, it's not a good situation at all. But yeah,
- 17:39Speaker 1: it's bad.
- 17:40Speaker 3: The other thing is, a lot of times gunsmiths are
- 17:44Speaker 3: kind of one-man band operations, and you hear a lot
- 17:46Speaker 3: about people holding on to guns for a real long time, right?
- 17:51Speaker 1: Yeah, so I remember when I was working at Jim's
- 17:54Speaker 1: Firearms in Baton Rouge, for most work, and most it
- 17:59Speaker 1: was me and, um, another two other gunsmiths and our
- 18:03Speaker 1: backlog at any point in time was like four months
- 18:06Speaker 1: for machining type work or gun bluing and things like that.
- 18:11Speaker 1: So it's, um, it's, it's, it's, the struggle's real. I mean,
- 18:15Speaker 1: it's just a lot of stuff is time consuming. And
- 18:18Speaker 1: when you're one of the few shops in an area,
- 18:20Speaker 1: you take on a big backlog. The, uh, I guess
- 18:23Speaker 1: that's the double-edged sword of actually having a good gunsmithing reputation, right?
- 18:28Speaker 1: Is that you have a long backlog.
- 18:30Speaker 2: What other stories, customers or gunsmith stories that you've heard?
- 18:35Speaker 1: Yeah, so another good, well, so here we've been talking
- 18:42Speaker 1: about like a lot about when to maybe ditch a
- 18:45Speaker 1: gunsmith or not go to a gunsmith or a bad gunsmith.
- 18:49Speaker 1: Let's switch it over to bad customers.
- 18:51Speaker 2: Yeah.
- 18:52Speaker 1: Cause I, I got, I got some of those cause it's, um, again, working,
- 18:57Speaker 1: working at the gunsmith shop. I was at the gunsmith
- 19:01Speaker 1: shop was attached to a fairly large retail store. Yeah.
- 19:04Speaker 1: So people would walk in the retail store with their guns,
- 19:08Speaker 1: bring it to the counter and then check it into
- 19:09Speaker 1: the gunsmith shop. So I just, I happened to be
- 19:12Speaker 1: out at the front counter, um, messing with some paperwork
- 19:15Speaker 1: when a guy was bringing in a gun and this,
- 19:18Speaker 1: this poor girl working the register, um, man, she, It was,
- 19:23Speaker 1: it was a bad situation all around, but anyway, he
- 19:25Speaker 1: walks in with the gun and he's just one of
- 19:28Speaker 1: those really stubborn smug type people, I guess you can say,
- 19:32Speaker 1: because he brings the gun in. It's in a case.
- 19:37Speaker 1: The case is pointed right at this poor girl and
- 19:40Speaker 1: he pulls it at the case. The guns right pointed
- 19:42Speaker 1: right at her and he's talking to me and I'm
- 19:46Speaker 1: trying to get the gun from him and he's kind
- 19:47Speaker 1: of like pulling it away as he's talking. And, of course,
- 19:51Speaker 1: the last thing he says.
- 19:52Speaker 2: Is, what are you doing?
- 19:55Speaker 1: It's unloaded. It's fine. Relax. Oh, no. And I'm like, okay, well,
- 20:00Speaker 1: let's check it in. I grab the gun from him.
- 20:03Speaker 1: Of course, the first thing I do is clear it, right?
- 20:06Speaker 1: So I pull the bolt back. And guess what? Guess
- 20:09Speaker 1: you'll never guess what comes out.
- 20:11Speaker 2: I'll never guess. A live round comes out of the gun.
- 20:15Speaker 1: A live round comes out of the gun. And then
- 20:19Speaker 1: he doubles down and gets mad at me for, for
- 20:22Speaker 1: questioning that it was unloaded. And he's, I checked it
- 20:27Speaker 1: in the parking lot. I don't know how that got
- 20:28Speaker 1: in there. It's like, okay, it's magic.
- 20:31Speaker 2: Oh my gosh. Ego is the enemy guys. And ego
- 20:34Speaker 2: is also dangerous. Um, it's okay. You messed up. It is.
- 20:38Speaker 2: He can admit it.
- 20:40Speaker 1: So long story short, he continued to double and triple down.
- 20:44Speaker 1: And he, he, I guess he, he was embarrassed at
- 20:48Speaker 1: that point. So, but his response was anger. So we
- 20:54Speaker 1: ended up to refusing to work on his firearm. I
- 20:57Speaker 1: told him to take your gun. I kept the live
- 20:59Speaker 1: round and see you later. You know, it's not, that's not,
- 21:04Speaker 1: that's not worth it for anyone.
- 21:06Speaker 3: Caleb, I had a buddy that worked at a gun
- 21:07Speaker 3: store here locally who, similar deal, guy brings in a
- 21:11Speaker 3: 12-gauge shotgun. I don't know if it was for consignment
- 21:14Speaker 3: or what. And he's just carrying the gun in, not
- 21:17Speaker 3: in a case, not anything. And my buddy Scott goes, well,
- 21:22Speaker 3: let's make sure this thing is unloaded. And it's, you know,
- 21:25Speaker 3: butt of the gun is sitting on the gun counter.
- 21:28Speaker 2: It's pointed vertically. And the guy goes, of course it's unloaded.
- 21:31Speaker 3: And he pulls the trigger and the gun goes off
- 21:33Speaker 3: and blows a hole in the ceiling.
- 21:35Speaker 2: Almost blows Scott's head off.
- 21:37Speaker 1: You gotta be kidding me. Yeah.
- 21:39Speaker 2: It was bad.
- 21:39Speaker 1: That's insane.
- 21:40Speaker 3: It was so like, he's like, it was all I
- 21:43Speaker 3: could do not to punch the guy in the face.
- 21:45Speaker 2: Can you imagine that?
- 21:47Speaker 1: That's, that's insane.
- 21:48Speaker 2: Oh my God. Yeah.
- 21:49Speaker 1: Cause like if, if that guy would have been the
- 21:52Speaker 1: guy in my story, he would have, he would have
- 21:54Speaker 1: killed that girl right in front of me. Yeah. Like
- 21:56Speaker 1: that's crazy. Yeah.
- 21:57Speaker 2: Oh my gosh. Listen, all guns are always loaded. We
- 22:00Speaker 2: treat them as such.
- 22:01Speaker 3: Um, All right Caleb, here's what people wanna know because
- 22:05Speaker 3: I feel like finding a good gunsmith can be tricky
- 22:10Speaker 3: and then there's some stuff that you can maybe do
- 22:12Speaker 3: at home but there's some stuff you should get a
- 22:14Speaker 3: gunsmith to do.
- 22:14Speaker 2: I wanna talk about all of that right after this.
- 22:18Speaker 3: What if you could be significantly better with your firearms
- 22:22Speaker 3: in a short time? At Range Ready Studios we offer
- 22:25Speaker 3: handgun and rifle classes to help you be the best.
- 22:28Speaker 2: You can be.
- 22:29Speaker 3: You'll be safer, more competent and just better at the range.
- 22:32Speaker 3: We also offer special experience classes, which include the gun,
- 22:36Speaker 3: the ammo, the gear, and the training. Learn more at rangeradiestudios.com. Shh,
- 22:43Speaker 3: go quiet with Remington's Subsonic Rifle Ammunition, designed for rifle
- 22:48Speaker 3: shooters who want quieter performance and enjoy shooting with a suppressor.
- 22:52Speaker 3: Operating at subsonic velocities, this ammo eliminates the loud sonic
- 22:56Speaker 3: crack making it perfect for shooting in noise-sensitive.
- 22:59Speaker 2: Areas, tactical training, or just a day of plinking.
- 23:02Speaker 3: The reduced velocity also minimizes recoil, offering better control and
- 23:07Speaker 3: faster follow-up shots, making it ideal for situations where stealth
- 23:11Speaker 3: and accuracy are paramount. See more on Remington's website on
- 23:15Speaker 3: subsonic ammunition from Big Green. Looking for a rifle that
- 23:19Speaker 3: fits you? Check out the new family of 110 rifles
- 23:21Speaker 3: from Savage Arms, featuring AccuFit V2. This customizable stock system
- 23:27Speaker 3: gives hunters and shooters tool-free adjustment for length of pull
- 23:31Speaker 3: and comb height, helping you achieve a more natural fit
- 23:34Speaker 3: and better shooting comfort. Visit Savage Arms today to find
- 23:38Speaker 3: your new 110 and learn how the new AccuFit V2
- 23:41Speaker 3: can help you shoot with greater confidence and consistency. So
- 23:46Speaker 3: the funny thing about gunsmiths is a lot of times
- 23:49Speaker 3: they're one-man operations. And it's the guy who has a
- 23:53Speaker 3: shed in his backyard or whatever.
- 23:56Speaker 2: And maybe they're great. Maybe they're not. You know, there's
- 24:01Speaker 2: always like the I got a guy.
- 24:02Speaker 3: It feels like gunsmithing is like this secret society of like,
- 24:06Speaker 3: where do I go to get this done? Now, a
- 24:08Speaker 3: place like Jim's or other, you know, bigger gun shops,
- 24:11Speaker 3: they maybe have somebody on staff, which is great.
- 24:13Speaker 2: But how would you find... a good gunsmith, Caleb?
- 24:17Speaker 3: I mean, how does, you know, especially you think about
- 24:20Speaker 3: somebody who's never.
- 24:20Speaker 2: Had any work done, it's like, where do I start
- 24:22Speaker 2: with this?
- 24:23Speaker 3: Or you move to a new state and you're going, man,
- 24:26Speaker 3: I need to find a gunsmith locally. Is there some
- 24:27Speaker 3: way to vet some of these guys?
- 24:30Speaker 1: Yeah, there is. And actually, websites like Brownells, we try
- 24:37Speaker 1: to stay updated on a list of gunsmiths around so
- 24:41Speaker 1: someone can actually host the name of their gunsmith shop
- 24:44Speaker 1: online and you can find it through Brownells. But let's
- 24:49Speaker 1: kind of go back to the core issue of finding
- 24:51Speaker 1: a good gunsmith. And the main issue here is that
- 24:55Speaker 1: a lot of gunsmiths, when they get out of gunsmithing
- 24:57Speaker 1: school or they finish an online program, not that the
- 25:00Speaker 1: online gunsmithing programs are bad, but the biggest mistake that
- 25:05Speaker 1: new gunsmiths make is trying to start their own business
- 25:09Speaker 1: immediately after getting out of gunsmithing school and not working
- 25:13Speaker 1: for someone else first. That's why gunsmithing itself has a
- 25:18Speaker 1: high failure rate of new businesses, because a lot of
- 25:20Speaker 1: them are trying to do that, which is a terrible
- 25:22Speaker 1: way to do it. Sometimes you can be successful, but
- 25:24Speaker 1: that also leads to the issue of consumers trying to
- 25:28Speaker 1: find a good gunsmith, because how do you know, you know,
- 25:31Speaker 1: if this guy just got out of gunsmithing school, he
- 25:33Speaker 1: just started his business. He maybe doesn't know everything he
- 25:37Speaker 1: needs to know experience wise. Now, how do I know
- 25:42Speaker 1: if that's the guy or not? And a lot of it,
- 25:45Speaker 1: like you mentioned before, is kind of word of mouth, like, hey,
- 25:48Speaker 1: I got a guy. And I've seen some really good
- 25:50Speaker 1: gunsmiths that are working out of their backyard. And I've
- 25:53Speaker 1: also seen some really bad ones.
- 25:55Speaker 3: Yeah, it doesn't have to be a fancy place for
- 25:57Speaker 3: the guy to be great at what he does. It
- 25:59Speaker 3: does seem like this is one of those professions that
- 26:01Speaker 3: you can absolutely benefit from. from kind of being an
- 26:05Speaker 3: apprentice or whatever, right? I mean, there's no substitute for
- 26:10Speaker 3: experience because you never know what they're going to have
- 26:13Speaker 3: to deal with. And if it's like, oh yeah, I've
- 26:15Speaker 3: dealt with this thing before, or there's this common issue
- 26:18Speaker 3: on whatever, Browning A5s, and they kind of have this
- 26:22Speaker 3: like tribal knowledge that they've built over.
- 26:24Speaker 2: Decades and decades.
- 26:25Speaker 3: So Maybe that's a good first question is how long
- 26:28Speaker 3: you've been gunsmithing? When did you start your business?
- 26:30Speaker 1: Yeah, that's the best first question you could possibly ask is, hey,
- 26:34Speaker 1: how long you been at this? And that'll tell you
- 26:38Speaker 1: a lot of what you need to know right there.
- 26:40Speaker 1: Because I mean, like me myself, I apprenticed for almost
- 26:44Speaker 1: a year and a half as a working apprentice in
- 26:46Speaker 1: a gunsmith shop. And I'm trying to like think of
- 26:50Speaker 1: what would happen, like how I would have been gunsmithing.
- 26:54Speaker 1: if I hadn't done that and I had just jumped
- 26:56Speaker 1: into it on my own, um, I would, I would
- 26:58Speaker 1: have been a terrible gunsmith because I had, I got
- 27:00Speaker 1: so much experience from that apprenticeship. I'd recommend anyone do
- 27:04Speaker 1: it to do that. That's, that's definitely the way to go.
- 27:06Speaker 2: Um, yeah.
- 27:07Speaker 1: And then, so that's a good first question to ask. Second,
- 27:11Speaker 1: a good second question to ask is, well, what's your specialty?
- 27:14Speaker 1: What do you specialize in?
- 27:15Speaker 3: You know, that's a good point because not everybody does everything.
- 27:18Speaker 3: There may be guys who are more like I build,
- 27:21Speaker 3: accurate bolt action rifles okay cool but maybe they're not
- 27:24Speaker 3: the person to do a 1911 trigger job or something
- 27:27Speaker 3: like that is that what you.
- 27:28Speaker 1: Mean exactly exactly.
- 27:31Speaker 3: Well along those lines what are the what are the
- 27:34Speaker 3: types of jobs that maybe you go if you're handy
- 27:38Speaker 3: you could do this yourself or i wouldn't do this myself,
- 27:43Speaker 3: I'd try to get a gunsmith to do.
- 27:44Speaker 1: Yeah. So honestly, it all depends on how mechanically inclined
- 27:49Speaker 1: you are and, you know, kind of what you're willing to,
- 27:53Speaker 1: how much time you're willing to spend on it as well.
- 27:56Speaker 1: Because if it's the, like, it's the first time you
- 27:57Speaker 1: do something, even me now, if it's the first time
- 27:59Speaker 1: I work on a particular gun, like new guns come
- 28:02Speaker 1: out all the time, I'm obviously going to spend more
- 28:04Speaker 1: time on it. So it comes down to how much
- 28:05Speaker 1: time do you have? How mechanically inclined are you? And
- 28:10Speaker 1: what resources do you have to do it? Like if
- 28:13Speaker 1: there's if I if I jump on Google and I'm like, hey,
- 28:17Speaker 1: how do I install a 1911 trigger and a brown
- 28:20Speaker 1: nose video pops up? I'm going to feel pretty comfortable
- 28:23Speaker 1: about installing that 1911 trigger myself. Yeah. But if there's
- 28:26Speaker 1: no resources out there on it, then you're you're maybe
- 28:30Speaker 1: in over your head. There's there's probably a reason no
- 28:32Speaker 1: one's made a video on it is because it's really difficult.
- 28:35Speaker 3: Changing the safety on your 1903, you know, yeah, there's.
- 28:40Speaker 2: Something obscure, Neil.
- 28:44Speaker 3: What about if someone is kind of like wanting to
- 28:46Speaker 3: be a tinkerer, are there certain, is there like gunsmith
- 28:51Speaker 3: starter kit, you know, the DIY, what are the top
- 28:54Speaker 3: maybe three to five things that they need to make
- 28:57Speaker 3: sure they have in their garage, on their workbench?
- 29:01Speaker 1: Yeah, so that's actually a really good question because we
- 29:04Speaker 1: actually did a video on it not that long ago.
- 29:08Speaker 1: Top tools for gunsmiths, we have top tools for pistol owners,
- 29:11Speaker 1: top tools for rifle owners, and there's a lot of
- 29:14Speaker 1: overlap on those, but those are some really good resources,
- 29:18Speaker 1: like a basic screwdriver set, punch, hammer, a workbench surface
- 29:24Speaker 1: of sorts, and a really good vice or at least
- 29:27Speaker 1: a decent gunsmithing vice. And with gun work, you can
- 29:32Speaker 1: get away with just going like to Harbor Freight or
- 29:34Speaker 1: something and getting like a cheap vice. That'll get you by.
- 29:38Speaker 1: But if you're getting into some serious gunsmithing, then you
- 29:40Speaker 1: need to drop a little bit more money on a vice.
- 29:42Speaker 1: But yeah, you can get by with some really basic
- 29:44Speaker 1: tools and just kind of build up from there. I
- 29:47Speaker 1: always recommend to people just to get like a basic
- 29:50Speaker 1: set of those tools, like your screwdriver set, a bench block, punch, hammer,
- 29:55Speaker 1: And buy more tools as you need them. Don't try
- 29:58Speaker 1: to guess what you're going to need because you're going
- 29:59Speaker 1: to end up spending way too much money on stuff
- 30:01Speaker 1: you don't use.
- 30:02Speaker 2: Yeah, yeah. The one-time use things. You're like, why do
- 30:05Speaker 2: I even own this?
- 30:06Speaker 1: Exactly.
- 30:07Speaker 3: What about, I guess we could end on a positive note.
- 30:10Speaker 3: What about good gunsmithing? Stuff that you've seen that you
- 30:13Speaker 3: were super impressed by. What impresses you when it comes
- 30:16Speaker 3: to gunsmithing?
- 30:17Speaker 1: Oh man, when it comes to gunsmithing, just attention to detail.
- 30:20Speaker 1: Like the... the devil is in the details. So whenever I, uh,
- 30:24Speaker 1: gunsmith hands me a project that they worked on, especially
- 30:27Speaker 1: at the gunsmithing schools, because I visit a lot of
- 30:30Speaker 1: the gunsmithing schools and when students show me stuff, they're
- 30:34Speaker 1: so excited to show it to me that it's like, I,
- 30:38Speaker 1: I immediately start to like fake enthusiasm, you know, not
- 30:42Speaker 1: all the time, but like if it's because I'm not,
- 30:45Speaker 1: I'm not a mean guy, you know what I mean? Um,
- 30:48Speaker 1: but Fortunately, 99% of the time when a gunsmithing student
- 30:53Speaker 1: is excited to show me something, it's really, really cool.
- 30:56Speaker 1: And like, for example, gunsmithing students build the weirdest stuff
- 31:00Speaker 1: around here because they get graded on it. And the more,
- 31:03Speaker 1: I say weird, but the more obscure thing they do,
- 31:07Speaker 1: the more unique project they do, the chances are they're
- 31:10Speaker 1: going to get a better grade on it because it
- 31:13Speaker 1: being obscure makes it a lot harder. So we've got
- 31:15Speaker 1: people making like Delisle carvings, but instead of, an infield
- 31:20Speaker 1: that shoots, you know, 45 out of a 1911 mag
- 31:23Speaker 1: that's integrally suppressed. You'll have them doing stuff like modernizing
- 31:28Speaker 1: that take on it. So they'll do stuff like a
- 31:30Speaker 1: Remington 700 that shoots nine millimeter and takes Glock mags,
- 31:33Speaker 1: you know, just really cool stuff. And the thing that
- 31:37Speaker 1: still impresses me the most to this day is hand polishing, bluing,
- 31:44Speaker 1: and hand engraving, because there's so much laser stuff out
- 31:47Speaker 1: there now, which is great, but man, you just, it
- 31:50Speaker 1: still can't replicate a good hand engraving job, you know?
- 31:54Speaker 3: And that's artistry stuff right there. I mean, that's not
- 31:57Speaker 3: only the attention to detail, but I don't think that's
- 32:01Speaker 3: something that you pick up in your first year to
- 32:03Speaker 3: be really good at, right?
- 32:04Speaker 1: It's not, no. And there's a lot of really, really
- 32:07Speaker 1: good gunsmiths out there that can't do that stuff just
- 32:09Speaker 1: because they don't have that artist eye or just that skill.
- 32:14Speaker 1: So it's a very unique skill set, which is probably
- 32:17Speaker 1: why it impresses me the most is because I just
- 32:20Speaker 1: kind of get lost in the art of it. Yeah.
- 32:23Speaker 3: And I mean, bluing and like case color hardening, that's
- 32:27Speaker 3: a little bit of a dark art, isn't it? I mean,
- 32:29Speaker 3: it's kind of like, If you're good at that, that's
- 32:32Speaker 3: pretty special.
- 32:33Speaker 1: Yeah. And it's pretty straightforward science-wise because it's all just
- 32:38Speaker 1: chemical reactions, you know? Yeah. But the prep work is
- 32:43Speaker 1: what really makes it an art because the finished product
- 32:46Speaker 1: is only going to be as good as the prep
- 32:47Speaker 1: work you put into it. So if you polish something
- 32:51Speaker 1: and you do a bad polishing job, when you blue it,
- 32:54Speaker 1: it's not going to look good. It's going to be blued, sure.
- 32:57Speaker 1: but it's just, it's not going to look quite right.
- 33:00Speaker 1: As in someone who took the time to hand polish it,
- 33:03Speaker 1: they sanded everything. They got all the lines going one direction.
- 33:07Speaker 1: Maybe they did a high polish finish on the flats
- 33:10Speaker 1: and then on the rounds, they left a matte finish
- 33:12Speaker 1: that looks really good in contrast. It's just, it's one
- 33:15Speaker 1: of those things. It takes an eye for it.
- 33:18Speaker 3: Well, and the thing is with gunsmithing, whether it's DIY
- 33:21Speaker 3: stuff or giving it to a skilled gunsmith, depending on
- 33:26Speaker 3: what you're going for, It can improve your shooting experience.
- 33:30Speaker 3: It can make the gun perform even better, even more
- 33:33Speaker 3: reliably and more accurately or help you be a better
- 33:37Speaker 3: shooter because it just functions a certain way. Or it's
- 33:41Speaker 3: something special and unique and it's a one of one.
- 33:43Speaker 3: And that does become something that is special that maybe
- 33:47Speaker 3: it's something you pass down for generations because there's a
- 33:51Speaker 3: story behind it.
- 33:52Speaker 1: Yeah, absolutely. Because like that perfect example, we just went
- 33:55Speaker 1: through the Frank Brown L collection in here and there's
- 33:59Speaker 1: some so many unique guns in there. It was just
- 34:04Speaker 1: like I was just laying in bed that night just
- 34:06Speaker 1: thinking of all those guns because it was they had
- 34:09Speaker 1: some really good Jerry Fisher one offs. It was it
- 34:11Speaker 1: was phenomenal.
- 34:13Speaker 2: It's cool. Very cool.
- 34:15Speaker 3: And I think once you start when, you know, as listeners,
- 34:18Speaker 3: you're watching this, listen to this.
- 34:20Speaker 2: Start thinking about that.
- 34:21Speaker 3: Think about, man, what did Caleb, he was talking about,
- 34:25Speaker 3: you could have a matte finish on part of it
- 34:27Speaker 3: and a high gloss on another. There's just the possibilities
- 34:31Speaker 3: once you open your brain to, off the rack guns
- 34:34Speaker 3: are cool, but it doesn't just have to be off
- 34:36Speaker 3: the rack.
- 34:36Speaker 2: There's more that can be done here.
- 34:39Speaker 3: Maybe it's something that you just make that you like
- 34:42Speaker 3: that is unique to you.
- 34:44Speaker 2: I know that you've got.
- 34:45Speaker 3: Some interesting tastes, Caleb. And sometimes it's like, I don't
- 34:48Speaker 3: care what everybody else wants. The regular gun companies aren't
- 34:51Speaker 3: making what I want because what I want is different.
- 34:54Speaker 1: Exactly, yeah. I have some weird guns that I made
- 34:57Speaker 1: just because it's not necessarily what other people want, which
- 35:01Speaker 1: is why it's not manufactured that way. But it's stuff
- 35:04Speaker 1: that I think is cool. And the moral of the
- 35:06Speaker 1: story here is, it doesn't matter what anyone else thinks
- 35:09Speaker 1: because it's your gun. You know, you're, if you're just
- 35:12Speaker 1: owning it to post on Instagram and get feedback, then sure,
- 35:15Speaker 1: you should care what everyone else thinks. But if, uh,
- 35:18Speaker 1: if you just want a unique piece of history or
- 35:21Speaker 1: art or, you know, I always like to call it
- 35:23Speaker 1: functional art in the form of a firearm. Um, and
- 35:28Speaker 1: you know, you just got to kind of, it all
- 35:30Speaker 1: depends on what you want. Cause it's yours. You know,
- 35:32Speaker 1: it can be unique. It should be unique. If you're
- 35:35Speaker 1: going to pass it down to your kids, you know, that's,
- 35:38Speaker 1: that's something you need to consider too, because I know
- 35:40Speaker 1: like my dad has some guns. He gave me a
- 35:43Speaker 1: shotgun last father's day that he, I remember him using
- 35:47Speaker 1: as I was a kid, we were hunting in the,
- 35:49Speaker 1: in St. Francisville all the time.
- 35:51Speaker 2: And, um, yeah.
- 35:53Speaker 1: And that, that gun whole hell like holds a special
- 35:56Speaker 1: place in me. It's not, it's not anything crazy. It's
- 35:58Speaker 1: an eight 70 wing master and older one, which is
- 36:00Speaker 1: a cool gun in its own right, but it's pretty,
- 36:03Speaker 1: it's pretty beat up and worn out. And, I mean,
- 36:06Speaker 1: you better believe I'm not going to refinish that gun.
- 36:08Speaker 1: It's staying exactly how it is. I'm going to use it,
- 36:10Speaker 1: and then I'm going to give it to my kids.
- 36:12Speaker 2: That's fantastic.
- 36:13Speaker 3: Caleb, thanks for being on with us. This has been fun,
- 36:15Speaker 3: you guys. You should look into it. If you've ever
- 36:18Speaker 3: had a gunsmith do something for you, they can specialize it.
- 36:21Speaker 3: Just do your homework, find a good one, and be patient,
- 36:24Speaker 3: and know what you want, and communicate that.
- 36:27Speaker 2: That's it for us. We will see you next time
- 36:29Speaker 2: on Gun Talk Nation.