Latest / Red Talks / Episode 8: Sustainability: The Future of Electrical Inspections
Transcript
- 0:00SPEAKER_01: Just loose connections in industrial facilities that cost something like twenty billion dollars a year in energy waste in the United States.
- 0:09SPEAKER_01: Just loose connections.
- 0:10SPEAKER_01: We're not talking about fires, we're not talking about lost processes, just the amount of energy that's being lost in uh running the equipment inefficiently.
- 0:23SPEAKER_00: Sustainability is a broad concept, but for industrial facilities it often comes down to reducing waste, whether it's wasted energy, wasted time, or wasted resources.
- 0:34SPEAKER_00: How do modern electrical inspection tools contribute to more sustainable operations?
- 0:39SPEAKER_01: Well, I think first and foremost, you know, when you look at sustainability, um, you know, people at carbon footprint reduction, energy management strategies, and everything else, but I I I like to look at it in the in a different way.
- 0:51SPEAKER_01: I think we can't write checks, or we have to stop writing checks that our grandchildren are going to pay.
- 0:57SPEAKER_01: You know, we just have to stop it.
- 0:59SPEAKER_01: We know we're over maintaining assets for a start.
- 1:03SPEAKER_01: So fundamentally, you've got to really take a deep dive into what the way you're currently working, is it required?
- 1:10SPEAKER_01: You know, so for instance, who says I have to change oil every 12 months?
- 1:15SPEAKER_01: You know, if I do oil analysis and I can extend that oil change to 18 months, 24 months, then that's what we should be doing.
- 1:24SPEAKER_01: So, you know, and then by by not doing that oil change, I'm equally I'm not doing the filter change.
- 1:30SPEAKER_01: Um equally I'm not having that delivered, equally, I'm not shutting down to do it.
- 1:36SPEAKER_01: You know, it's like look at look at all the car, the car you drive today.
- 1:40SPEAKER_01: Whenever I started driving, it was every six months or six thousand miles, it had a service.
- 1:45SPEAKER_01: 18,000 you tore this at 24,000, it was all time-based, um uh or time-based or usage-based, but the time-based was the big one because a lot of people weren't driving as much then, so you weren't achieving that that mileage.
- 1:59SPEAKER_01: And someone in the automotive industry went, you know something, if we if we start to monitor the parameters of our engines and our vehicles, we can then go to a condition-based structure, which means we're going to do a lot less.
- 2:11SPEAKER_01: So that becomes a commercial advantage to us.
- 2:13SPEAKER_01: So our vehicle does not need to be an oil change, but but once a year, not twice a year.
- 2:20SPEAKER_01: Well, it worked for cars, you know, and that be but it was a commercially driven decision to make your car, the running cost of your car lower, yeah, so people you could stand up in the market.
- 2:33SPEAKER_01: But we've still got this crazy mindset where we're bloody doing this time-based oil changes and this, that, and the other.
- 2:41SPEAKER_01: Now it is changing, the mindset is changing.
- 2:43SPEAKER_01: People are now thinking more um from a cost savings thing, but now when you actually extrapolate it out, it be it starts to help in every element of business.
- 2:53SPEAKER_01: It's just good business not wasting money for a start, because it all comes off the bottom line, you know.
- 2:59SPEAKER_01: So if you're not doing unnecessary changes, but equally you have to think there's upstream and downstream changes because if you're not using too much oil, then we're not making the oil for you to waste.
- 3:11SPEAKER_01: We're not making the filters for you to waste.
- 3:14SPEAKER_01: You know, we're not delivering that.
- 3:15SPEAKER_01: I've not got vehicles running up and down delivering stuff you shouldn't be using.
- 3:19SPEAKER_01: Yeah, so and again, if you're saving that sort of money, your processes, improvements can start to actually reduce the costs to the end user.
- 3:28SPEAKER_01: So it's a win-win-win all the way down the line.
- 3:31SPEAKER_01: But unfortunately, you're up against industries that make a lot of money doing unnecessary maintenance, and they don't want to hear this story.
- 3:39SPEAKER_01: They don't want to hear this.
- 3:40SPEAKER_01: This is a C-suite discussion, unfortunately, at this stage, where they you know, there are corporate mandates to do this.
- 3:46SPEAKER_01: So sustainability, resilience, reliability, safety, they all they all mould into one.
- 3:54SPEAKER_01: They they really do, and it's a win-win-win down the line.
- 3:57SPEAKER_01: But stop writing those checks, you know, start taking responsibility on the way we manage our assets and just do it, just do it the smart way, the smart way.
- 4:07SPEAKER_00: Many companies are under increasing pressure to meet environmental, social, and governance ESG goals.
- 4:14SPEAKER_00: What role does predictive maintenance play in helping organizations reduce their carbon footprint and improve energy efficiency?
- 4:21SPEAKER_01: So I hate the word predictive maintenance.
- 4:24SPEAKER_01: I can't predict nothing.
- 4:26SPEAKER_01: You know what I mean?
- 4:27SPEAKER_01: I I've had this discussion with clients.
- 4:28SPEAKER_01: It's actually a language is very, very important.
- 4:31SPEAKER_01: You know what I mean?
- 4:32SPEAKER_01: And so people call predictive maintenance or condition-based maintenance or your trend analysis, trending, you trend into uh specific failure.
- 4:41SPEAKER_01: So, you know, when you look at failures like PF curves and things like that, a functional failure doesn't mean it stops, it means it's not delivering at the level that you require, the performance level.
- 4:51SPEAKER_01: Um, so for for me it's about it's about understanding that you know that how how things are failing, but managing them.
- 5:00SPEAKER_01: So, you know, again, we know by running equipment at their optimized levels, you get better energy management.
- 5:08SPEAKER_01: Yeah, equally, we know, for instance, there are certain elements of business in the United States.
- 5:14SPEAKER_01: We looked at a study, I think it was by the Department of Energy, where they showed that just loose connections in industrial facilities cost something like$20 billion a year in energy waste in the United States.
- 5:27SPEAKER_01: Just loose connections.
- 5:28SPEAKER_01: We're not talking about fires, we're not talking about lost processes, just the amount of energy that's being lost in uh running the equipment inefficiently.
- 5:38SPEAKER_01: So by by having these structures in place but having condition, but I can't predict things, but I can run condition to an unacceptable level of performance.
- 5:48SPEAKER_01: You don't want it stopping.
- 5:49SPEAKER_01: Yeah, so people think I mean I had an interesting conversation with a very senior uh guy in in the in the data center world, the end user client, and he went, Well, okay, if we put all this in, you can tell me exactly how many hours I've got left in my transformer.
- 6:05SPEAKER_01: I went, No.
- 6:07SPEAKER_01: No.
- 6:08SPEAKER_01: When you look at failure, for instance, it's something something like I forget again a paraphrasing, but it's something like 75 to 80 percent of uh assets have no end of life, they're still running when we change them.
- 6:23SPEAKER_01: So we we change them because of the performance requirements.
- 6:26SPEAKER_01: You want better energy management, better output, but the thing's still running.
- 6:30SPEAKER_01: So when you say predictive, people have this mindset that you can tell them exactly how long you got left on the asset, and that's a misnomer.
- 6:38SPEAKER_01: You can't, you can't.
- 6:40SPEAKER_01: I can I've inspected transformers on one day and they've blown up on the next, and during the inspections, it was perfectly okay.
- 6:48SPEAKER_01: You know what I mean?
- 6:49SPEAKER_01: So there was an inherent design defect that nothing I had could find it.
- 6:54SPEAKER_01: It got a short in the winding, bang, off it went, but nothing, there were no parameters around it that told us.
- 7:00SPEAKER_01: So the use of predict the language predict is is is is is I think um confusing, especially if you've not been doing this for a long time.
- 7:11SPEAKER_01: So condition-based inspections to run to a you know what you would accept as a level of performance is the way we should be doing this, but again, it's understanding your criticality and understanding what you require as a fun, what you class as a functional failure.
- 7:27SPEAKER_01: You know, if you've got a pump and you say, well, I need a hundred, I need a minimum of 120 litres a minute out of this pump, otherwise I'm gonna have overheating and things like that.
- 7:36SPEAKER_01: Well, you're not gonna run to 120 litres because you're gonna run to a failure status where you can actually impede other assets.
- 7:42SPEAKER_01: You might say, I'll run it to 140 litres as my as my maximum, so I've got that little factor in there, but really it the peak performance on this should be 185 litres a minute, so that's where we want to be trying to keep it, and if it changes, we want to be doing something about it, but we're you know, we can give ourselves time to plan if we understand criticality and we understand failure, and that's the biggest area is where I see people falling over.
- 8:09SPEAKER_00: Safety and sustainability are often seen as separate priorities, but they're deeply interconnected.
- 8:15SPEAKER_00: Can you talk about how Iris' solutions improve worker safety while also supporting sustainability initiatives?
- 8:22SPEAKER_01: So, um, so let's put it this way.
- 8:24SPEAKER_01: If I if I'm gonna I understand what's going on, so let's say I'm looking at a piece of switchkit, and I understand I will run to NETA standards, and it's 20 degrees maximum temperature between assets.
- 8:36SPEAKER_01: You know, there are guidelines for me to do.
- 8:39SPEAKER_01: Now, typically you'll have a three-year shutdown or a five-year shutdown where you have to complete shutdown on the system, you're going in there, you're pulling things apart, you're tweaking things, and nine times out of ten, we break more things and we fix.
- 8:53SPEAKER_01: And that's the truth of it.
- 8:54SPEAKER_01: Anybody that's ever been involved in a shutdown, they'll tell you when they start up, things break that weren't broken before.
- 9:00SPEAKER_01: That's a thing called infant mortality where we inject defects into the system, but that's a whole series of talks you can do on that.
- 9:09SPEAKER_01: But you know what we're trying to do with this is um by only doing what's required, yeah, you can reduce the amount of time you shut down if you shut down at all.
- 9:23SPEAKER_01: So, for instance, I'm looking at a piece of switch gear, but I I have an inspection window in there.
- 9:28SPEAKER_01: I can check every connection daily if I want.
- 9:31SPEAKER_01: Yeah, with an operator, I've got thermoclips on the connections.
- 9:36SPEAKER_01: Yeah, I'm doing ultrasand and partial discharge testing if it's a high voltage asset.
- 9:40SPEAKER_01: There's multiple condition-based tests I can do that will tell me if there's a problem.
- 9:47SPEAKER_01: Now, if I'm looking at this and there's no heat, there's no ultrasand, there's no PD, no clips to change colour, it's spotlessly clean, what is there that I can do from a maintenance standpoint to make that any better?
- 10:02SPEAKER_01: There isn't.
- 10:03SPEAKER_01: Yeah?
- 10:04SPEAKER_01: So you just keep running it, you keep testing it, you keep checking it, and then if you find there's a something's running outside of the parameters that you've agreed upon and your criticality, etc., then you'll do a shutdown.
- 10:16SPEAKER_01: So it goes boils back to that automotive thing.
- 10:19SPEAKER_01: If you're not doing unnecessary maintenance, your sustainability goals are achieved as part of that.
- 10:27SPEAKER_01: Plus, your safety is you're not opening it up.
- 10:30SPEAKER_01: All your interactions are safe.
- 10:32SPEAKER_01: So you're running it safe, you're not running it in a fault condition, you're not doing unnecessary maintenance.
- 10:38SPEAKER_01: So I see that once reliability, safety, sustainability, resilience, they are all part of that same model.
- 10:45SPEAKER_01: You know, if you do this well, you achieve all your goals.
- 10:48SPEAKER_00: Looking ahead, how do you see electrical maintenance evolving to meet the demands of a more sustainable future?
- 10:54SPEAKER_00: Are there emerging technologies or trends that Iris is particularly focused on?
- 10:59SPEAKER_01: Well, technologies change every day.
- 11:01SPEAKER_01: So it's it's there's never a um there's never going to be a one-size-fit.
- 11:05SPEAKER_01: So I mean, look at Iris, we're always changing designs and we're doing things for clients specifically.
- 11:09SPEAKER_01: I mean, we're we've just brought out a range of high-temperature inspection windows for uh boilers and refineries that have an ROI of 52 days, you know, and that's after installation.
- 11:21SPEAKER_01: So, you know, we're building systems to meet specific problems for clients.
- 11:26SPEAKER_01: So keeping abreast of technology is imperative, obviously.
- 11:31SPEAKER_01: Um, but it is, you know, again, it's being willing to let go of those legacy practices.
- 11:39SPEAKER_01: You know, amount of times you've gone in and sort of oh, why are we doing this?
- 11:42SPEAKER_01: We've never done it like this before.
- 11:43SPEAKER_01: Why are we doing this?
- 11:44SPEAKER_01: So again, aligning your team, training your team, that's the way it has to go, making everybody aware of what your goals are with reliability, safety, sustainability, and resilience.
- 11:57SPEAKER_01: Um, if you don't, you will never succeed.
- 12:00SPEAKER_01: Yeah, because guess what?
- 12:01SPEAKER_01: Who are the people that have to implement that?
- 12:03SPEAKER_01: It's the people on the ground.
- 12:05SPEAKER_01: So it's a it's a it's an awareness program of what you're trying to achieve.
- 12:08SPEAKER_01: This isn't you trying to get rid of people's jobs, this isn't you trying to do something to you know streamline it so you people are out of work because that's again that distrust thing.
- 12:18SPEAKER_01: So awareness, technology awareness, building in something that builds value, you know.
- 12:26SPEAKER_01: You know, it's like what when you put windows in and other things like that, they're not another, it's a replacement strategy.
- 12:32SPEAKER_01: When I put an inspection window in, it's to replace that outdated shutdown stuff, or extend it at least.
- 12:40SPEAKER_01: You know, again, I had a conversation with a guy the other day, and he went, oh, we have to have mandatory shutdowns every three years, and this, and I went to him, why?
- 12:49SPEAKER_01: Oh, we have to, why?
- 12:51SPEAKER_01: Because of I said, but you need to ask that question, why?
- 12:54SPEAKER_01: And then you need to ask yourself, is there a better way that we can do this?
- 12:59SPEAKER_01: So if we do have to do it, then is there a better way we can do it?
- 13:03SPEAKER_01: Is there a way that we can design it better?
- 13:06SPEAKER_01: And if so, let's do that.
- 13:08SPEAKER_01: You know, if it's like that main plan maintenance optimization PMO, that's another great place to start.
- 13:13SPEAKER_01: And it's just ask the question.
- 13:16SPEAKER_01: You know, I sit on electrical standards committees and I'm a diesel fitter, yeah.
- 13:21SPEAKER_01: So I ask the stupid questions and I'm too dumb to know better.
- 13:25SPEAKER_01: But the questions are important to ask.
- 13:27SPEAKER_01: So I'm the one who asks why do we do it this way?
- 13:29SPEAKER_01: And they're like, Oh, we've always done it that way.
- 13:31SPEAKER_01: That's not an answer, yeah.
- 13:34SPEAKER_01: So it's like, be brave, take the steps, be that voice in the wilderness if you have to be that just says, Why are we doing this?
- 13:44SPEAKER_01: And is there a better way to do it?
- 13:46SPEAKER_01: And if so, let's do it.
- 13:47SPEAKER_01: You know, if we do it this way, will it bring value to us?
- 13:50SPEAKER_01: Yeah, and it's again, um, people get worried about, you know, everyone, it's WIFM.
- 13:57SPEAKER_01: What's in it for me?
- 13:58SPEAKER_01: So when you start talking about this, people get concerned about their position within the organization.
- 14:04SPEAKER_01: Are they gonna lose their jobs?
- 14:06SPEAKER_01: Are they gonna lose, you know, are we gonna make things, you know, harder for them?
- 14:10SPEAKER_01: Um, and the answer is no, no, no.
- 14:12SPEAKER_01: You know, I I've never fended in for a camera that can fix a damn thing.
- 14:16SPEAKER_01: You know, I can find crap, but you're the guys that got to fix it.
- 14:19SPEAKER_01: So we're not trying to do that, we're just trying to make your job safer and stop you doing unnecessary maintenance.
- 14:26SPEAKER_01: You know, most maintenance guys hate hate maintenance, but they love repairing things.
- 14:31SPEAKER_01: They hate servicing, you know, but they love repairing things.
- 14:35SPEAKER_01: So I'm more about, you know, obviously you've got preventative maintenance, and I'm I am oversimplifying and paraphrasing a lot here.
- 14:42SPEAKER_01: But the core concepts are just stop doing unnecessary work and try and find a better way to do it.
- 14:49SPEAKER_01: But you have to be part of the problem, you're part of the solution.
- 14:52SPEAKER_01: Because if you're not part of the solution, you're the problem.
- 14:54SPEAKER_01: So it's like I will say change just when you approach this, it's like even some of my presentations.
- 15:01SPEAKER_01: I actually have a video of someone cleaning a whiteboard while I'm talking, and I'm like, this is how you have to approach a problem.
- 15:08SPEAKER_01: You can't approach a problem with the mindset that created it, you have to approach a problem with a fresh mindset, and that means getting rid of all your preconceived ideas, and just having a common sense approach to this and asking, you know, five whys.
- 15:21SPEAKER_01: That's another sort of technically we use approach, you know.
- 15:24SPEAKER_01: If you ask, they will say if you ask why five times, you'll probably come to the root cause.
- 15:29SPEAKER_01: You know what I mean?
- 15:30SPEAKER_01: But it's a bit like one of your kids asking you, Are we there?
- 15:32SPEAKER_01: Yeah, it does get on your nerves.
- 15:33SPEAKER_01: But if you go through these processes, so again, it's about just it's a brave new world that you'd be part of it.
- 15:42SPEAKER_00: Red Talks features voices driving safety, reliability, and innovation forward in the industrial world.
- 15:49SPEAKER_00: If your work challenges the status quo, we'd like to hear from you.
- 15:53SPEAKER_00: Learn more at redtalk.comslashabout.