Latest / Ham Radio En Español / E0022: 0:00 / 13:09 ¡FINALMENTE! MANDO A DISTANCIA Bluetooth Anytone para radioaficionados Anytone DMR
Transcript
- 0:00This is a bluetooth ABT remote for radios on Iton' s five, something
- 0:05we' ve been waiting for a long time. Let' s see you
- 0:17welcome back to the channel. My name is Jason I' m case Fit
- 0:21GEWW and this is ham Radio two zero reviews, news and how to use
- 0:25new things on the hobby radio. Thanks for joining us today. This is
- 0:29completely new. It' s a bluetooth remote control device, but it'
- 0:33s not really a radio. It' s a remote control device for virtually
- 0:38the Eniton. In fact, it comes with this cable. It' s
- 0:41a catfive- style cable. It has forty- five RJ connectors and operates
- 0:49with remote control for cable in the non bluetooth versions of five hundred seventy-
- 0:53eight. You want to see how easy it is to connect this bluetooth device
- 0:58to a radius of five hundred and seventy- eight I' m going to
- 1:02show you at the end of this video. So keep an eye out.
- 1:03Obviously, this is the cable. It comes with cable, comes with a
- 1:07manual, with a bluetooth mode device, CABLEM mode so you can switch from
- 1:14one to the other and use it on multiple PTTM button radios. Here are
- 1:18these three buttons. I haven' t determined what they' re doing,
- 1:23but you can see the manual and see what they' re doing. You
- 1:23can program in channels up, down, on, middle high, all that
- 1:29kind of stuff and you can change the programming to do whatever you want.
- 1:34This device is hard to see in the Chamber. This says down, this
- 1:38says up and this is the power button. The button in the middle is
- 1:42the ignition button. Of course, you can also use these others. For
- 1:48that it is quite similar to the programming screen on the radio. Therefore,
- 1:52you can use these buttons as needed for everything else. It has this part
- 1:57on one side that looks almost like a micro SD card according to the manual.
- 2:02It' s not that. It' s just some kind of breathing
- 2:06ports or something. This is the speaker and hearing aid connector for the Kingwood
- 2:10style connector. So, you can put some hearing aids or something, or
- 2:15even have a flap microphone and with the microphone put it on your belt and
- 2:21so it won' t fall and I guess it' s also going to
- 2:23dock that way. He hasn' t tried yet. This is a USBC
- 2:28to load this real bluetooth drive. So for all those who are always crying
- 2:32saying they want to have USBC instead of micro USB. Well, this isn
- 2:37' t a radio, but obviously it' s a remote control for a
- 2:39radio, but it does charge through USBC and then you would connect the cable
- 2:44here. If you used it in the cable version and belt clip, then
- 2:47let' s connect it to the radio and see how they look to connect.
- 2:52This is really easy. So follow the instructions in the manual gives you
- 2:55five or six steps after the third step, he' s going to r
- 3:00take control and he' s going to do it on his own. So
- 3:01a quick demonstration. Here finding the radio menu, because Mira is reconnecting.
- 3:07I just reconnected after I disconnected I did it on purpose to show you how
- 3:13it reconnects. It' s where all the menus are and you move to
- 3:20Bluetooth. Bluetooth here is you have to activate. This makes sure the Bluetooth
- 3:23is on. It was turned off by default, so I turned it on.
- 3:27Find there you see the pairing and as soon as you enter the pairing,
- 3:31basically as soon as you turn it on, it will connect as it
- 3:36is connecting now, as soon as you turn on the bluetooth. The manual
- 3:37says try to match and enter Bluetooth search mode. And by the time I
- 3:42wanted to enter pairing mode, I was about to press the Blue Tooth search
- 3:46button, it was already connected. Then it' s good or bad.
- 3:50I mean if you have one of these on your belt and you' re
- 3:53walking through a parking lot at an amateur radio fair, if someone on your
- 3:58truck has Bluetooth, maybe it' s connected to the to, it'
- 4:01s going to connect automatically. I don' t know yet I don'
- 4:03t know if that' s good or bad, but it' s easy
- 4:06to connect one way or another. So you know this is really good.
- 4:10But I' m going to show you what the menu or the real screen
- 4:14of the device looks like, because you' ll want to see that.
- 4:16One of the things it does is that if it sees that there is no
- 4:19activity, it turns off the screen does not stay on for long at all.
- 4:24How you see it right here. I think there' s probably a
- 4:28way to adjust that on the menu, but I don' t know.
- 4:30I didn' t touch that. This is only by default, but you
- 4:33can keep pressing that button. So we have the menu and it' s
- 4:38very similar to the menu you' ll see on the radio for HT and
- 4:41mobile radio. You can enter your apr menus this is bluetooth. So this
- 4:46is the configuration of the radio. Right now, this is not a configuration
- 4:50within this device. This is configuration inside the radio. So we can climb
- 4:56up here, move up and out. There was one thing I couldn'
- 5:00t understand when I first lit it. Of course, it' s back
- 5:04on with this middle button here and these are other channel buttons up and down.
- 5:09How I just changed. So I' m in the lower band right
- 5:13now I' m gonna change this. And here' s my Sharing node.
- 5:16This is my analog zone within my OK radio and you can schedule these
- 5:21three, but I programmed these three buttons before I started using the camera.
- 5:26I' m gonna show you what it does in a minute, but I
- 5:30couldn' t figure out how to change the volume. There' s still
- 5:31no knob or anything like that. So, as you change the volume by
- 5:35expressing the power button again, if you press more time, the power button
- 5:40will be paid. But if you press briefly, the power button says channel
- 5:45up. Now, in the middle pressure, it again and it' s
- 5:47going to change the volume and you can change the volume up and down.
- 5:51Just like that, so I left it in half volume came in full volume
- 5:57and it' s really very strong. So I programmed these three teglas so
- 6:00he could get down and up. This is the ignition at the bottom,
- 6:04this is the top and bottom band switch in the middle and this is be
- 6:09ugly or memory mode at the top. Now I' m in ugly b
- 6:14mode at the bottom press it again and go back to memory zone mode.
- 6:19I can switch between the upper band and the lower band. There are selected
- 6:25bottom band and then I can change the power, which is the indicator here.
- 6:29And these are the four power settings that are on the radio. So
- 6:32now I can do that. I' m going to go to my ed
- 6:38honegeple antenna This is about twenty- seven twenty- eight feet in the air
- 6:43at the base and we' re going to go into a ulis repeater that
- 6:45' s not far away. Case five gw B testing, so casey five
- 6:55agew W testing at the WIS. Repeater that' s the analog repeater and
- 7:04the MR repeater in Greve Vine. Actually, I could probably change the Hearst
- 7:10repeater, the MR repeater in Greve Vine is out of the Internet right now,
- 7:15so we' re going over to the Top Band, so we'
- 7:19re going to try to make LEW five HRC and Hearst, which is in
- 7:25the Hearst conversation group. That' s perfect. Case Five xw B testing
- 7:28in the Heart conversation group from a base station radio and Greve Vine on the
- 7:32Hearz repeater with a bluetooth microphone that I just connected to my radio for a
- 7:36video I' m making. Case Fit agew B. That' s a
- 7:42lot of information. C Bridge New Match here to see if he does anything,
- 7:46but he' s definitely activating it so you can see ok. That
- 7:50' s the easiest way to look at it. Now that it' s
- 7:53active. It' s active here Case Five w W testing and that light
- 7:59is red. An orange color in the chamber, but it' s red.
- 8:01I have low exposure in the Chamber because the screen is very bright,
- 8:05but I don' t want to change it. I left him alone like
- 8:09this. But now, when I get off the case fag agew radio and
- 8:13running tests on the Hearshtolk group, I' m gonna see I' m
- 8:18not going through the seabed, but I' m not sure I' m
- 8:22in Slott at the right time. I stop transmitting and the light goes out.
- 8:24If I was getting activity right now, the light would turn green.
- 8:28That' s very good. I wonder how far I can go with her.
- 8:33That' s gonna be the next question. I' m gonna make
- 8:35another video about this later,' cause I think I' m gonna put
- 8:39this radio in my truck. Guys. Here' s one thing about this
- 8:41radio. Two things about the radio. I hadn' t turned this radio
- 8:46on in probably a year and a half or something. The current version of
- 8:48framework, which you need to make this work, which is the framework one
- 8:52one seven cPS and framework one. I' m sorry version CPS one hundred
- 9:00and sixteen. If the framework comes with I think one, one, seven
- 9:03and says the manual here that you have to use framework one, one,
- 9:07seven or more to make this work. With the five seven eight there were
- 9:11six, six eight hundred ninety ten, one two, there was a six,
- 9:16seven, eight ninety ten, one, one, one two. All
- 9:20along the way, all the way to seventeen. That' s how the
- 9:24back versions, the old versions, are known. Anyway, version one hundred
- 9:28and seventeen of CPS and Framewer I updated it from one hundred and seventeen without
- 9:35problems and without problems I made an export at all. The second part,
- 9:41a newer part, is when you update to this point and update the base
- 9:46band on these radios. Borra to Coude Blog. I didn' t have
- 9:52anything on this radio. Anyway, I exported my coate plac that I shared
- 9:56with you. I' ll put a link in the description below for this
- 10:01cult Clog is in the software' s CPS eight seven eight. Makes an
- 10:05export and as click on the export list, which is the top button in
- 10:09the export window. I export that to a dot lst file opens the software
- 10:15five seven eight. I had to change a couple of button settings, like
- 10:18the button settings that weren' t all transferred because they had more buttons.
- 10:24The mobile radio has more buttons than the portable radio, but it was easy
- 10:28to move the codes of one another and update my sound code and everything.
- 10:31Five hundred and seventy- eight I downloaded the complete list of Irenet radio contacts.
- 10:37He transferred it to her five hundred seventy- eight. I think I
- 10:39' m gonna have to put this radio in my truck now that I can
- 10:43finally connect through bluetooth, because the radio doesn' t have a removable screen.
- 10:46This is my favorite MR radio on the mobile DMR radio market. Now
- 10:52it really is, in fact, a triband radio. It will make two
- 10:56hundred twenty to five bats in analogs just reconnect now I wonder if there is
- 11:01any way to change the name of the device, the name of bluetooth id
- 11:05on this device, because it appears as l s eighty twelve fifty- six
- 11:09album. I don' t know. I want to switch it to radio
- 11:13two zero I don' t know. We' ll see something for another
- 11:16video, but this is my favorite mobile MR radio. He doesn' t
- 11:20have a removable screen right now, so I can' t put it in
- 11:22my van where I want it. Now. I might put it there,
- 11:24so I' ll probably put it there and use it and we' ll
- 11:30have some road trips videos coming up. How many people will get this,
- 11:35how many people are excited about this. It' s not a mountable screen,
- 11:39as we expected it to be. This is more hand- held,
- 11:41but it' s no different to grab the microphone from your mobile radio and
- 11:46hold it while you' re driving good. If this was a setup,
- 11:48Blue Tooth should have a microphone coming out of it and actually, this device
- 11:52has a connector, Jack Kingwood k on the side of it. Therefore,
- 11:56you could actually grab a microphone a microphone like a coctor falls on it and
- 12:00mount it or attach it to a clip somewhere in your vehicle where you can
- 12:03see it. It' s not a very big screen, but for those
- 12:07of you with compact cars or just no space in your vehicles, it could
- 12:11be good that way and then you can pull a microphone out of it as
- 12:16a cam connector and put it aside. Then you have the best of both
- 12:20options. I wish the screen was a little bigger if you were really going
- 12:24to ride it in the car. But I really don' t think it
- 12:26matters good. This is amazing. I got this in the mail yesterday and
- 12:31it' s completely new. Bridge com' s been tempting us for a
- 12:35long time and he blames us. I have an affiliate link in the description
- 12:39below for the brige com link to this, so it helps me to support
- 12:41the channel and let me know in the comments below who is going to use
- 12:46this and what do you think about it. If they liked this video,
- 12:48first I thank them for staying if you think I deserve your subscription. Please
- 12:52click to subscribe below so you can stay up to date with all the other
- 12:56videos I make on this channel. If you liked this video, sound about
- 13:00the d five, seven and eight on the programming codes in general, check
- 13:03out some of the videos that come over here there are several seventy- three