Latest / FOILERS / Crisp Foils: Chris Porter on the importance of the right stabiliser
Transcript
- 0:07Hi, I'm Pete Warmsley and welcome back to the Foilers
- 0:11Podcast. This is the last episode for the
- 0:14year, so I wanted to extend a huge thank you to everyone who's
- 0:17subscribed, followed, and shared the show.
- 0:20Your support has helped keep these conversations truly
- 0:24independent and informative, regardless of the people I'm
- 0:27talking to and the brands I cover.
- 0:29In today's episode I'm joined by Chris Porter, the founder of
- 0:33Chris Foils. Chris is an aerospace engineer
- 0:36turned foil designer who's been quietly influencing how modern
- 0:40foils perform and focusing on the often overlooked importance
- 0:44of a well designed stabilizer. Chris has worked with Armstrong
- 0:48Foils, collaborated with Coke Foils, and design stabilizers
- 0:51that have been written by some of the best foilers in the
- 0:53world. In this conversation, we get
- 0:56into why stabilizers are one of the most underrated parts of any
- 0:59foil set up, and how small design changes can dramatically
- 1:03affect pumping, carving and control, and why tuning your
- 1:06gear can often deliver bigger gains than buying a latest front
- 1:09wing. We also talk pump foiling,
- 1:12downwind foiling, shimming, what causes a noisy foil, how to fix
- 1:17it, and they're thinking behind Chris's flex stabilizers.
- 1:21If you're someone who likes to understand why your foil feels
- 1:23the way it does, this is the episode for you.
- 1:26Let's get into it. Enjoy Chris.
- 1:30For people who may not know you yet, can you give us a bit of a
- 1:33short version of who you are and what Chris Foils is all about?
- 1:38Sure. And hello all to all the
- 1:40listeners and thanks for having me on peak.
- 1:42My name is Chris. I live in Perth in WA but I grew
- 1:46up on the East Coast in Sydney. My father of two, husband of 1
- 1:51and a passionate foiler. I've been called a nerd before
- 1:54and I probably agree with that. And as far as Crisp goes, it's
- 1:58my creative outlet for nerding out on foiling.
- 2:02So started just for myself and it's it's grown from there.
- 2:06You've been involved in a whole lot of water sport disciplines,
- 2:09sailing, surfing, windsurfing, Sup, falling prony, etcetera.
- 2:13What was the progression, what came first, and what do you want
- 2:16now? Well, we're often led by our
- 2:18parents, right? So my my dad was into dingy
- 2:22sailing and windsurfing and surfing.
- 2:24So that's what I started with. I was probably most passionate
- 2:29about surfing through my teens and early 20s, but when I moved
- 2:33over to WA I I figured out that in Perth that anyway, the surf
- 2:37is hard to come by but it's really windy.
- 2:39So I got, I got seriously into windsurfing.
- 2:42I did a bit of everything, but I think I was most hooked by speed
- 2:46sailing and it appealed to the nerdy side and tweaking gear.
- 2:52As far as foiling goes, I, I, I would watch the foilers in the
- 2:55surf and I think, oh, they're not really riding in the pocket
- 2:58and they're not really carving like I can on a surfboard.
- 3:02It didn't, didn't really appeal to me, but I think it's one of
- 3:05those things that you don't really know what it's like until
- 3:07you feel it and experiencing for yourself.
- 3:10But what got me interested was actually watching Sam.
- 3:15He's a young competitive stand up paddle racer here in WA and I
- 3:19saw him on the Swan River paddle his stand up foil onto a boat
- 3:24like and take off down the river.
- 3:25And it was in the middle of summer.
- 3:27There was a big through overhead so it was hot, there was no
- 3:30surf, there was no wind and I was just bored and I watched
- 3:34that. I was like that.
- 3:36That is what I need to do. I went down to the local stand
- 3:40up foil shop, which doesn't exist anymore actually, but they
- 3:44turned me around and said you need to go over and talk to
- 3:46Marcus Tarju at the stand up shop in in North Korea, which
- 3:50which I did. And Marcus was great, gave me
- 3:52some advice. That was my goal was to ride the
- 3:55wakes on the river and it probably took me a year to get
- 3:58there. But in that intermediary time I
- 4:02really got used to foiling in the surf to begin with and I had
- 4:07some downwind attempts and fails and I went to to wing a little
- 4:10bit. So that was the progression.
- 4:12These days I think I love my downwind foiling and I love a
- 4:17bit of prone foiling. And particularly this time of
- 4:20year with all the Christmas parties going on and the party
- 4:23boats on the river, I love a bit of boat wake thieving on the
- 4:27foil as well. Yeah, and there's some pretty,
- 4:29sometimes during the year in the Swan River and Perth, there's
- 4:32some pretty entertaining boats, or let's just say some of those
- 4:36boats have entertainment on them, which can be quite, which
- 4:40can be quite interesting as well when you catch those boat wakes.
- 4:44I've heard of people getting past beers and things like that
- 4:47too from those boats. Yeah, that, that, that's quite
- 4:49common. I never really accept that offer
- 4:51because I I don't want to miss and and pollute the river.
- 4:55I love the river. But I gotta say that the some of
- 4:57the the entertainment on board are still curious about foiling
- 5:01and they've they're shouting out questions from on the boat and
- 5:05I'm behind the boat a little bit taken aback at at the situation
- 5:08and trying to answer that question.
- 5:09So it's good fun. I love it.
- 5:11Yeah, they don't seem to mind people riding behind.
- 5:13It is getting pretty busy out there, though.
- 5:15It's getting pretty popular. The with the, the pump foilers
- 5:19and and to some extent some of the downwinders as well.
- 5:21Still paddling along behind, but it's it's good fun, yeah.
- 5:26It is I, I think if, if everyone is sensible about it, then it
- 5:30will remain a bit of an asset for us to to utilize.
- 5:34But I would appeal to guys to stick within your limits, stay
- 5:38out of the channel as much as possible and respect the but
- 5:43drivers don't get in their way. That's fine.
- 5:45Little tips for keeping that alive?
- 5:46Because I love it. Yeah, that's there is some
- 5:48rumours people are getting a little bit worried about someone
- 5:51complaining or someone falling off in front of a boat and then
- 5:54some issue and yeah, getting banned.
- 5:57But hopefully we all kind of police each other, so to speak,
- 5:59with a bit of sensible suggestion at times for people
- 6:03that aren't doing the right thing.
- 6:05Yeah, totally. Now you've got an interesting
- 6:08background. You've got an honours degree in
- 6:10aerospace engineering. So let's have a bit of a look at
- 6:14that because obviously that we're that's going to cross over
- 6:16into foiling in our discussion very shortly.
- 6:18What originally drew you into that field?
- 6:21Yeah, look, my dad's an engineer, my grandfather's an
- 6:24engineer and I figured out reasonably early on that that
- 6:29style of, of thinking and, and working was a good match for me.
- 6:34I went to an academically selective high school in Sydney,
- 6:38which was very maths and science and engineering focused.
- 6:44The path was laid out for me, you might say, but but I did
- 6:47enjoy it and I was always tinkering with, with electronics
- 6:50and other projects, design and build projects.
- 6:53So I naturally went through the engineering stream into
- 6:57university. I was going to do mechanical
- 6:59engineering. I thought it would give me a
- 7:01broader choice of what kind of work I would do because I didn't
- 7:05really know and two years in I had a look at what was ahead of
- 7:08me in mechanical engineering. I was enjoying surfing and
- 7:12partying and it was hard to stay motivated for university.
- 7:15I think a lot of people feel that after a couple of years of
- 7:18very heavy maths and and kind of core subjects, aerospace looked
- 7:24the least boring to me at the time.
- 7:26And so that appealed to me. But I'm in no way an aircraft
- 7:31nerd, associated with a lot of aircraft nerds through
- 7:35university and through my working career as well.
- 7:38But I'd have a very small chance of being able to identify with
- 7:41the exact type of aircraft that flies by.
- 7:44I don't go, I don't go out and take photos of the aircraft at
- 7:47the airport or anything like that.
- 7:49It was interesting to study and it's it has opens doors to
- 7:54interesting work, including working in the foiling industry.
- 7:57So at at what point did you realize that those engineering
- 8:00skills could translate across into into foiling?
- 8:04I think it was about, you know, part of universities teaching
- 8:08you what you need to know and a lot of it is teaching you how to
- 8:12think and how to approach problems.
- 8:15So having a little bit of confidence that I can look at
- 8:18any sort of problem and, and break it down into its elements
- 8:21and start attacking it. Having the confidence to have a
- 8:24go at something with a goal in mind, but also being comfortable
- 8:28in failing and as long as you learn from that failure.
- 8:31So I, I think those things were probably most important because
- 8:35when I started working in, in the foiling industry, it's all
- 8:38very new. And so you're kind of breaking
- 8:40new ground constantly. The the background in Arrow
- 8:43certainly helped, but I was really digging deep into my
- 8:46memory banks to recall all that stuff that was relevant to foil
- 8:51design or wing design you might say, because it wasn't something
- 8:55I used a lot professionally in in the leader to working with
- 8:59hydrofoils. Well, you came from probably a a
- 9:01different background of some of the surf industry designers.
- 9:05So what sort of maybe disadvantage or and advantage do
- 9:09you reckon you had coming into foiling from from your
- 9:11background? Look, I think people call me a,
- 9:14a numbers man. I want to.
- 9:16I want to see why something might work on paper or on the
- 9:21computer rather than just going out and having a intuitive feel
- 9:26for, for how a design might change to be better.
- 9:30So look, I think, I think some people do it that way and you
- 9:35know, all power to them. It's definitely one way of
- 9:38getting to a solution. I, I feel like it's maybe a a
- 9:42harder way because I'm more comfortable with numbers and
- 9:46computer simulations and design than I am with creating lots and
- 9:50lots of prototypes and trying to interpret what I feel.
- 9:53That's part of it for sure. But I think the advantage that I
- 9:56have over others in this industry is that I do have the
- 9:59background and the abilities to get very, very close to what I'm
- 10:05seeking in a design before I even prototype.
- 10:08So I kind of shortcut the process.
- 10:10I can do that more quickly than guys can build prototypes and
- 10:14then interpret their feelings in writing them.
- 10:16So don't get me wrong, I do a bit of both, but I think I can
- 10:19shortcut the process based in on my background.
- 10:22Yeah, it is insane because you know, it's, I've spoken to quite
- 10:25a few of the kind of the, the foiling brand representatives
- 10:29and owners and so forth. And there's definitely those
- 10:31that take a very scientific approach.
- 10:33And as you say, there's those that do a lot of prototypes and
- 10:36really do it by feel. And it's not as scientific.
- 10:39It's not that they don't take it into account, but it it's not it
- 10:42doesn't figure as strongly as others.
- 10:44So there's a real variation I think in the industry in terms
- 10:47of how people approach it. Yeah, I, I totally agree.
- 10:50And, and I think as the the discipline of foiling matures
- 10:57and we're hunting smaller improvements and it's really
- 11:00going to come to the front that doing it in a scientific way is
- 11:04going to yield the best results. We've seen foils change so much
- 11:08in the last five years. And a lot of that early
- 11:12progression was down to the artisan types, the creative
- 11:16types who were just dreaming and trying.
- 11:19More recently, the changes that we've seen are incremental.
- 11:22They're the small one and two percents that they come from
- 11:25approaching it scientifically. So I expect to see a bit of a
- 11:29shift in the industry will professionalize.
- 11:31But there's always a place for those creative guys who have the
- 11:35courage to dream and try the ideas out-of-the-box, rather
- 11:40than refining those that already exist.
- 11:43And I understand you kind of kicked this off, so to speak, in
- 11:47terms of making it happen by building ACNC machine for your
- 11:52brother's surf business, surfboard business.
- 11:54How did that come about? Yeah, so, so that was pre
- 11:57foiling. My brother had a recently
- 11:59successful surfboard business on the East Coast, Triass
- 12:02Surfboards. He was making boards and he was
- 12:05running workshops teaching people how to shape their own
- 12:09boards. And you'd always end up with
- 12:11leftover fiberglass and resin. And he was, he was laying those
- 12:15up in a bit of a mold and making sheets of kind of, you know,
- 12:19backyard G10, you might say. And then he was cutting out fins
- 12:24and foiling them by hand. The process was pretty dirty and
- 12:28long. He wanted to do more with fins,
- 12:31but he felt like he didn't really have the time to do it.
- 12:33So, you know, I was thinking about what to get him for his
- 12:36birthday and then I had the idea if I could just build a machine
- 12:39and help him with some fin designs and you just press go.
- 12:43He can be off teaching someone how to shake a board and the
- 12:45machines making a fin. I did have a bit of experience
- 12:49in in CNC machining, so I wasn't coming in completely naive, but
- 12:54that that was a bit of a naive assumption that you could get it
- 12:58to the point where you just press go.
- 12:59And I learned that the hard way and I still learn those lessons
- 13:03from time to time running my own machine.
- 13:05It's not straightforward. So anyway, look, we did a couple
- 13:09of sets of fins on his machine. He's the creative artisan type
- 13:15kind of guy, really good at working with his hands.
- 13:17And I'm the computer guy and the CNC machine was a bit much for
- 13:21him. So it ended up back with me.
- 13:23He made a few things on it, but it wasn't really style.
- 13:26So you could say I made the machine for myself in the end.
- 13:30And that's that's what enabled me to, you know, early days make
- 13:34some surfboard fins for myself and my kids and windsurfing
- 13:38fins. But then once I got into
- 13:40foiling, it was like, you know, the light bulb was on.
- 13:42I was like, I know, I know exactly what I can do with that
- 13:45machine. So yeah, that's how the that's
- 13:48how the CNC machine came about for sure.
- 13:50And so you ended up you sort of started the process of, from
- 13:54what I understand making stabilizers because you you made
- 13:57your very first one for your own axis setup.
- 14:00What made you decide to to do that?
- 14:02I was learning to foil I'd, I'd moved on from from subfoil to to
- 14:07prone foiling and I wanted to link waves.
- 14:10And so I was, you know, looking at my foil setup and thinking
- 14:15how important the stabilizer must be in this equation and
- 14:19the, the available designs on the market, particularly at the
- 14:23time. But to be honest, it hasn't
- 14:24improved all that much. But, but particularly back then,
- 14:27five years ago or so, I thought I can do a better job than this
- 14:31and, and I won't have to part ways with a few 100 bucks
- 14:33either. I've got everything that I need.
- 14:35So I had a crack and it was a bit of a process.
- 14:40I learned a lot during that process.
- 14:42And, and I had a few late nights down in the workshop.
- 14:46I remember I finished, I finished the first stabilizer on
- 14:50a Friday night and on the Saturday the surf was on and
- 14:54then I was out at a spot called bus stops and I got my first few
- 14:59waves on that and suddenly I could link waves and everything
- 15:03felt better. It was faster, it was more
- 15:05efficient, and I was just stoked.
- 15:07I was just about like designing, building and then riding
- 15:13something that you've made and and totally conceived yourself.
- 15:16It's just super satisfying. So that was a big rush for me.
- 15:20And what were the the next steps were friends sort of asking for
- 15:24designs and things like that or you know, what, what happened
- 15:27next and how did that evolve? Yeah, so it was at a time in
- 15:30foiling when when everything was pretty new and everyone was in
- 15:35the depths of foil addiction. So lots of people were, were
- 15:39curious and had an open mind to new things and they saw what I'd
- 15:44done and they just had to try what I'd done.
- 15:47So I shared, I shared it with those that that I could who were
- 15:50on the same brand as me. I had a lot of inquiries from
- 15:53from other guys, friends and new friends and now old friends who
- 15:59just wanted to have a crack at doing something similar for what
- 16:03they were writing. So my first customer that I'd,
- 16:06I'd say is a customer is is Sean Murphy from down in mantra.
- 16:10He was, he was winging a lot and was, was looking for something
- 16:13or something else. So he got in touch and, and I
- 16:16said, you know what, let's, let's design one.
- 16:18Tell me what you want and we'll go from there.
- 16:20So he gave me a few specs that he thought was important to him
- 16:24and what he was writing and, and what he enjoyed or didn't enjoy
- 16:27about that. And we designed the first one, I
- 16:30think it was called the 356, which was the span back then.
- 16:34And I made one for myself and one for him.
- 16:37I personally delivered it to him and then we, we went out a spot
- 16:40called Sharky's and, and both got a wave and, and, and loved
- 16:44it. It was, you know, the next step
- 16:46for me. It was even better than my first
- 16:48prototype and he was happy. And that was a rush as well.
- 16:52No one's been pretty supportive through the journey as well.
- 16:56He's he's always bought my latest design and giving me lots
- 16:58of feedback and, and promoted it amongst the crew down there.
- 17:02That's just one example really of, of how supported I feel in
- 17:06the local community and, and how this is kind of organically
- 17:09grown. So back then I didn't, I didn't
- 17:11have a brand. I had no idea that I would
- 17:15continue to make these and sell them.
- 17:18It was really just the first little baby.
- 17:20Steps and you've obviously you've worked with lots of
- 17:22people since then and one of them is that comes to mind is
- 17:26Oscar Johansen. And you apparently, from what I
- 17:29understand, you sent him a crisp 333.
- 17:32What made you do that? And then what was the outcome of
- 17:34that? Yeah, well, look, most people
- 17:37who've dealt with Oscar know that he's just a nice guy.
- 17:41He's got all the time in the world for the foiling community.
- 17:44I feel sorry for him sometimes. He must get inquiries every day.
- 17:47What should I buy? But I was starting to put some,
- 17:51some pictures on Instagram of what I was building for myself
- 17:54and and my friends and and he reached out and I, you know, I
- 17:58knew who he was. I watched his refuse where he
- 18:00pumps around on foil and it's just inspirational foiler.
- 18:04So actually said to him, he expressed some interest in
- 18:07trying one of my stabs and I said I'm, I'm going to be over
- 18:10your way in a few weeks, you know, can we link up?
- 18:13So I met, I met up with him on the South Coast of NSW and had a
- 18:18foil with him. I totally cooked it.
- 18:20I just moved to the ART series access wings, the HA's and
- 18:25coming off lower aspect wings, I just did not know what I was
- 18:28doing. So I was out there floundering
- 18:30around and and he was there with Jeremy Willmott and I gave them
- 18:35a prototype each to ride. They were both pretty impressed.
- 18:38My son captured it all on his on his drone.
- 18:41So it's a little video up on Instagram from years ago.
- 18:44And yeah, look, he he got back in touch afterwards and I said,
- 18:48I want to send one to you because I can see I can get some
- 18:52valuable feedback from you. And I was also thinking, you
- 18:55know, well, maybe this could be a thing.
- 18:56And and it'd be great to have a bit of promotion if he, if he
- 19:00did one of these little pumping videos or something like that.
- 19:03I had him riding what I called the 3:30, which was a surf
- 19:07oriented tail. I thought that would be more his
- 19:10style. And I had Jeremy on the 333, but
- 19:13Jeremy just was doing laps, you know, on the Triple 3 and
- 19:17linking all these waves. And he said, oh man, this I can
- 19:19link way more waves on this than anything that I've been writing
- 19:22on Axis and that piques Oscars interest.
- 19:25So he said, can you actually send me a 333 rather than a 330?
- 19:28And so I did and I got, you know, a little bit of feedback
- 19:32and a little bit of promotion from him on that when he was
- 19:35writing it. But yeah, then came his world
- 19:38record attempts. And I remember I was up in the
- 19:42northern suburbs of Perth doing a very average down window with
- 19:45Shane. And we got in and I looked at my
- 19:48phone and I've been tagged in a reel from Oscar that he just
- 19:51pumped in the surf for two hours and 46 minutes.
- 19:54And I was just like, what? That's insane.
- 19:57First of all, that as a feat of foiling.
- 19:59That is crazy. And.
- 20:02And secondly, it's like his, his dumbness on what I sent him.
- 20:05That's incredible. So I felt a bit of pride in, in
- 20:09what I, what I designed that it enabled him to, to, to do that.
- 20:14And that that got a bit of international publicity kind of
- 20:18bubbling away for for my tails and my little backyard
- 20:22operation. Hey foilers, I just want to take
- 20:26a moment to let you know about lip sunglasses.
- 20:28They're made for water sports and they're absolutely game
- 20:31changing. I first bought a pair of lips
- 20:34and glasses because I had UV damage in one of my eyes from
- 20:37long term exposure through many years of water sports.
- 20:41I was also getting very tired of squinting through glare every
- 20:44time I went falling and honestly they blew me away.
- 20:48They're made for water sports. They've got lightweight and
- 20:50flexible frames for comfort and durability.
- 20:53They've got injected polarization in the lenses for
- 20:56glare free vision and a double stage retention system that
- 20:59means they can't come off even in the biggest wipeout.
- 21:02They also have a watershedding lens coating that keeps your
- 21:05view crystal clear. I love them so much that I
- 21:08actually became the Australian distributor.
- 21:11If you want the best on water eyewear, check out Lip
- 21:14sunglasses and as Foilers listeners, you get 15% off their
- 21:18premium Typhoon model with Zeist lenses using the code Foilers
- 21:2415. Give them a try and do your eyes
- 21:26a favour. Yeah, I spoke to Oscar and
- 21:30apparently he didn't really plan to do that necessarily.
- 21:33Now have a go at that. And one of the reasons why he
- 21:35didn't go any further is because he got thirsty and hungry.
- 21:37I think it kind of just happened, and he just kept
- 21:41going. And then he just decided, well,
- 21:42we're getting pretty angry and thirsty here.
- 21:45I don't know how long are we going to keep going with this?
- 21:47And yeah, so I got the impression he could have gone
- 21:49even further if he did kind of prepared for that.
- 21:52But it's an amazing feat at the time.
- 21:55I think he could have, yeah. I watched back that video and
- 21:58he's in a wet suit. It's just obviously hadn't
- 22:00thought that he'd be pumping around for that long.
- 22:02He's just sweating in his wet suit, you know, And you can see
- 22:05that it was probably not his physical ability or his gear
- 22:09that was limiting him, but just that he wasn't as prepared as he
- 22:13could have been. But still.
- 22:15Yeah. Awesome.
- 22:16Love it. Yeah.
- 22:18And and what did that do for the Chris brand?
- 22:21You know what, what happened from that?
- 22:22You would have obviously got some publicity.
- 22:24So what did that turn into for you?
- 22:26Yeah. Look, I, I got AI got a lot of
- 22:28enquiries it, it kind of sent it a little bit international
- 22:32rather than just kind of WA focused.
- 22:35I think I had a few in Australia on it at that point, but
- 22:40certainly certainly didn't have any inquiries in from
- 22:43internationals. But then, you know, I was I was
- 22:46getting inboxed a lot, you know, Oh, you're the pump stabbed guy.
- 22:51Is this going to change my pumping?
- 22:52And I had to put the brakes on a little bit for most guys.
- 22:55I'm I'm pretty I'm pretty honest.
- 22:57I don't want to over hype anything.
- 22:59So it's like, look, this, this isn't going to allow you to pump
- 23:03around in the surf for two hours and 46 minutes that Oscar is
- 23:06special, but it might help. And you know, this is how we can
- 23:10make it happen. Scott had to had to get used to
- 23:13accepting international payments and how to ship stuff overseas.
- 23:18And it was it was painful, to be honest.
- 23:20It's not what I wanted to do and it's still not my favorite part
- 23:24of running this. But I do love it when the guys
- 23:27do receive it and they get in touch and they've got the
- 23:30feedback. That's what makes it worthwhile.
- 23:32And you've you've had some, you've had some pretty key
- 23:35writers out there giving you feedback and using a gear.
- 23:38We've got Zane Westwood, Josh Ku, Tom Carroll, Patrick Israel,
- 23:42Kathy Shipman. What sort of stands out from
- 23:45some of those conversations and how did how did they get
- 23:48involved with what you're doing? Yeah, So that it was about the
- 23:51same time that I'd sent one to Oscar that that some of those
- 23:55people were were curious about it.
- 23:58Zane's a gear tweaker and a creative.
- 24:01He thinks outside the box. He was, he was pretty good early
- 24:03on. Meeting Tom Carroll was a spin
- 24:06out. I guess he'd been talking to
- 24:08Oscar or something, but actually got to shake his hand and and
- 24:11pass it over to him personally, which was cool.
- 24:15And that's gave some legitimacy to what I was doing to my my dad
- 24:19and other members of my family who were kind of core surfers
- 24:23and not really understanding what I'm doing in foiling and
- 24:26the fact that I met Tom Carroll. But the take away I think of of
- 24:30getting elite riders and their feedback is you get mixed
- 24:36feedback, right? Some guys are really good at
- 24:38articulating what I feel. Some of them not so good.
- 24:41And the other thing is that these guys are are very talented
- 24:46athletes. If it's foiling or any other
- 24:48sport that they want to do, they're probably going to do it
- 24:50quite well and they're probably going to make almost anything
- 24:53work. So I've got to kind of temper
- 24:55the feedback that I get from them and know that the best
- 24:59feedback I'm going to get from the elite side of of writing is
- 25:04how far can these things be pushed?
- 25:05I want to know like Zane's cranking a turn, when does it
- 25:09let go? And is it a problem that it
- 25:11let's go there? Do you want it to let go and do
- 25:13you want to recover? What is it bringing to your
- 25:16riding? So exploring the envelopes.
- 25:18But really for me, the priority on collecting feedback is from
- 25:23the everyday rider. I am an everyday rider and I'm
- 25:25passionate about improving the foiling experiences for everyday
- 25:30riders. The elite guys, look, these
- 25:32days, it's all stitched up. They've got, they've got their
- 25:35contracts with the brand. They're not allowed to be seen
- 25:38writing my stuff. And I came across that early on
- 25:41as well. I've got guys, you know,
- 25:44camouflaging their tails so that they can't be seen writing
- 25:47something that's that's not from their contracted brand.
- 25:50Yeah. But really, my key and my core
- 25:54is everyday writers. In terms of that evolution of of
- 25:58making the stabs, you got involved in a relationship with
- 26:02Armstrong. How did that come with that?
- 26:04Was that through Oscar or was it through through other people in
- 26:07the industry? And what were you doing with
- 26:09with Armstrong? Yeah, Yeah.
- 26:11So that was that was kind of a big break and and I owe that to
- 26:13Oscar. I owe a few things to Oscar, I
- 26:15think. So he was dabbling in a few
- 26:18brands and he was doing his reviews of different brands.
- 26:20But that was about the time when he signed up with with
- 26:23Armstrong. And he must have mentioned to to
- 26:26Army, you know, hey, I've been riding his tale and it's good.
- 26:29Or maybe Army just saw what he was able to do with his pumping
- 26:32record. Yeah, Oscar and Army kind of
- 26:35made a little group chat and started to chat to me, to suss
- 26:38me out. And Army was coming to Perth for
- 26:41one of his demo days. He was turning around, demoing
- 26:44some some gear out and asked if I'd have dinner with him.
- 26:50And that kind of went from there.
- 26:51I was, I'm surprised to hear that he was riding my 333 and
- 26:56that he enjoyed it. And I was scratching my head
- 26:59like, how did he get on? And then I thought that so that
- 27:02guy, you know, in New Zealand must be, you know, buying it for
- 27:06him. So, you know, you can't just put
- 27:08an order in as Army Armstrong. I'm not sure what I would have
- 27:11done if I if I had a gun. Does feel like is it going to
- 27:14get copied? Do what?
- 27:16What do I do anyway? It must have been must have been
- 27:19John who bought a couple and sent them over to Army.
- 27:20So I was on it. So here that he'd been writing
- 27:25it and that he'd liked it and kind of pretty happy that it led
- 27:29to an opportunity to work with Armstrong.
- 27:32So it was just something that I started with on an hour by hour
- 27:36basis in my free time. And the first project really was
- 27:41the the pump foil. They just said, look, we don't
- 27:44have anything that guys can learn to dock, start with and go
- 27:49at it. I was left alone to do that to
- 27:51begin with and it kind of developed from there.
- 27:53It was. It was good, good fun.
- 27:54Yeah. And were you full time or were
- 27:56you just sort of on a on a part time basis working with them and
- 27:59and how long did you do that for?
- 28:00Yeah, so. I started part time with them.
- 28:04I was trying to juggle everything.
- 28:06I was still making triple threes and sending them around the
- 28:10world and I had a day job. So for a while there I was
- 28:15burning the candle at both ends. But I dropped out of my
- 28:19management role in aviation and went to four days a week so I
- 28:25could really pursue what I was most passionate about.
- 28:29I did, I did that part time for a year.
- 28:31We we did the pump foil designs. I came up with the foil section
- 28:36that was used in the the HIV 2 series foils.
- 28:41I did everything but the foil section in the what became the
- 28:45downwind performance line. And I think in that year I also
- 28:49did the learner series, which are pretty underrated as far as
- 28:53learners go. After that things were working
- 28:56really well and they were pretty happy with with how the foils
- 28:59were working and they asked me what would it take for you to to
- 29:03come on board with us full time. So I gave him a number, probably
- 29:07a little bit less than what I've earned in aviation with 20 years
- 29:11experience and a little bit more than they were probably used to,
- 29:14but they jumped at it and that's how we went.
- 29:17So I spent another year working for them full time which was was
- 29:20great fun designing and testing. You've got some sort of fairly
- 29:23elite, well, high level foil designs you worked on there and
- 29:26then some beginner ones like the S1 learner foils.
- 29:30You know, what's the, what are the different challenges in
- 29:32designing, you know, beginners versus say elite races,
- 29:35intermediates? What are you taking into account
- 29:37that's that's different across that?
- 29:39Yeah, it is different and it it was a a different problem to
- 29:44solve, but in some ways a better problem than trying to get an
- 29:48extra few percent on a high end performance foil.
- 29:52But the challenge really with learners is that the sensation
- 29:55of foiling is is brand new. It's like putting someone on A2
- 30:00wheel bicycle for the first time without training wheels and some
- 30:03people will pick it up pretty quickly.
- 30:06Everyone's going to fall off and some people need the time with
- 30:10the training wheels to get used to that new sensation that your
- 30:14body isn't used to those physics of foiling.
- 30:16So really it's all about stability and reliability and
- 30:22robustness with the Learner foil.
- 30:24So pitch stability, I designed the foil sections to have almost
- 30:28no pitching moment whatsoever. You Can Dance around on the
- 30:31board and it's not going to punish you.
- 30:33And learners don't know where to put their feet and they don't
- 30:35understand that they need to move forward or back based on on
- 30:39how they're trying to launch. So it was about making something
- 30:43that was kind of foolproof. And I think it does a really
- 30:46good job of that. My wife and my kids, once we had
- 30:50the Learner foil in our quiver they progressed pretty quickly.
- 30:54And also every now and then I'll jump back onto it if I want to
- 30:57learn a new skill. Like, winging is not my Forte,
- 31:02but if I want to learn how to heal side tack, I'll Chuck the
- 31:06learner foil back on and it just gives me that extra stability
- 31:11and reliability in how the foil's going to react, and I'll
- 31:15pick up a new skill like that. Yeah.
- 31:17So it was an interesting challenge and pretty satisfying
- 31:20to see how well suited it is for learners to get into the sport.
- 31:24It's pretty critical to get that first foil right for a beginner
- 31:27too. I I know I was given some advice
- 31:30and I bought a particular foil and I just could not get it up
- 31:33on the foil. And then one day someone who
- 31:35knew more than me, so that's just not the right foil to start
- 31:38on you. You know, you're going to
- 31:39struggle. I'm like, yeah, I am struggling.
- 31:41Getting pretty annoying, I have to say.
- 31:43And then someone told me which one to go on and change foils
- 31:46and the whole game changed. So, you know, it's one you've
- 31:50got to get the right advice and then you've got to start on the
- 31:52right foil or it's, it's, I mean, it's a frustrating
- 31:55process. It's rewarding, but it's a
- 31:57frustrating process when you're learning as it is.
- 31:59But if you don't have the right gear, yeah, people just about
- 32:01give up sometimes when they get it wrong.
- 32:03I think so, yeah. Yeah, look, that's the
- 32:06importance of the local shop. You know, if you're not already
- 32:08connected with, with guys who've been through the learning
- 32:11process, then hopefully you get the, the, the right advice from
- 32:14the local shop and they've often even got geared to to demo and
- 32:20try and before you're buying is a big thing.
- 32:22I'd hate to see people buy a whole foil set up.
- 32:25Yeah, go out and get a ultra high aspect set up because they
- 32:28see what that's what the top guys are using and try to learn
- 32:30on that would be a disaster. Yeah.
- 32:32And and you obviously we talked about designing for beginners
- 32:34then, but what about for the more elite athletes?
- 32:37What are your challenges with that?
- 32:38Obviously quite different. They want, they want speed.
- 32:41Stability is probably not as important, but it probably is at
- 32:44speed. What are you thinking about when
- 32:46you when you did that work? Yeah, it is, it's, it's a
- 32:49different challenge to solve. We're often seeking out marginal
- 32:54gains and we have a a really good basis, you know, that
- 32:58another foil that they've written that they like these
- 33:01aspects about and this is what they're seeking to improve.
- 33:05So it's more of a, a numbers game.
- 33:07It's, it's a little bit more scientific to design for the the
- 33:10elite riders. And also it's a balancing act
- 33:13between, I guess not going so well with the design that they
- 33:17they can't ride it, but also not drifting so far away from
- 33:21something that's controllable because that that also inspires
- 33:24some confidence to enable them to push harder.
- 33:27So it's not always about having high performance design and
- 33:31sometimes it's about having controllability with a very good
- 33:35design that gives them more confidence to push their limits.
- 33:39So that's their mental and physical contribution to their
- 33:43performance as well as the the performance that they're getting
- 33:46from their foil setup. Yeah.
- 33:47And I suppose it's just getting that balance right for everyone
- 33:51depending on what they want out of it in terms of brands.
- 33:53I was here, you also did some work with CODE.
- 33:55What was involved with with working with with Marcus and Dan
- 33:59at Code? Yeah, it was.
- 34:00It was a little bit before Armstrong.
- 34:02Most of the foiling community know each other here in Perth.
- 34:05So obviously I'd met Marcus early on when I decided that I
- 34:07wanted to learn to foil and then he was a bit of a downwind
- 34:11debate or so I'd always keep tabs on on what he was up to and
- 34:14and listen for the little pearls of wisdom from him.
- 34:18I'm not sure I've met Dan before, but they'd obviously got
- 34:22together and and started thinking about starting,
- 34:24starting their brand and how I was involved with them.
- 34:27I think I cut their first stabilized prototype, just a
- 34:31kind of a custom job that I did for them.
- 34:33And then once they kind of went all in with code, they went and
- 34:38bought their own CNC machine to cut their own prototypes.
- 34:41So they they asked for some help in in getting that set up, what
- 34:45cutters to use, speeds and fees, programming the machine.
- 34:49They're both really clever guys, so it wasn't so much about them
- 34:53not being able to do it without me.
- 34:55It was about just shortcutting the process.
- 34:56So I was able able to Passover what I'd learned in the last
- 35:00kind of couple of years leading up to that to make it quicker
- 35:03for them to get up to speed to cut their own protos.
- 35:06And I did that in exchange for some downwind lessons from
- 35:11Marcus. And he also hooked me up with
- 35:14James Casey. So I got to go on one of the
- 35:16sessions with with James Casey as well.
- 35:19So they really wanted to cut. Prototypes and I really wanted
- 35:22to track this downward thing. So it was a perfect, perfect
- 35:26match. There's nothing wrong with the
- 35:27barter system. It's a, it's a, it's a pretty
- 35:30good system when you use Ron, I think as well.
- 35:32Yeah, that's right. Your journey through this
- 35:36process is enabled to do a bit of travelling within the falling
- 35:39industry as well. You've gone to Hood River,
- 35:41you've been to China, you've been to New Zealand and a few
- 35:44other places. What sort of trips have stood
- 35:47out for you in your falling journey?
- 35:49Yeah, I've been fortunate to be able to travel around a bit with
- 35:53with Armstrong and I was working for them.
- 35:55I think of those, the standouts were probably Hood River and and
- 35:58China for very different reasons.
- 36:01Hood River as a windsurfer. I'd always same clips from there
- 36:05and wanted to get there and see it for myself.
- 36:07I didn't go windsurfing when I was there, but because I'm just
- 36:10too foil brained. But that was cool.
- 36:12It's an amazing setup. It's a really cool town.
- 36:16The town is kind of built around water sports, so lots of like
- 36:20minded people. They're very friendly, friendly
- 36:22guys. You know, I met some guys like
- 36:24Kevin McHugh, Trey and Walker Hendrix and TJ from a big wins
- 36:30just kind of really, really nice guys and and helpful and sharing
- 36:35their local resource, which is a really amazing place.
- 36:38I think if if you had the resources to do so and you
- 36:41wanted to learn to downwind, you could you could get the whole
- 36:44process done in about a week in Hood River.
- 36:47It's just so perfect for it. And then China, China is
- 36:51somewhere, I think it was a good trick because it's somewhere
- 36:53that I probably wouldn't have taken myself to.
- 36:56I went with an open mind, didn't really know what to expect.
- 37:00And it's it's very different to Australia in some ways.
- 37:04It's looking into the future a little bit.
- 37:07You know, they embrace technological change.
- 37:09People are really kind and they work really hard.
- 37:14And I think for me, it just kind of made me realize how
- 37:18privileged we are in Australia. Those guys are working in China,
- 37:21They're working so hard to have anything close to the lifestyle
- 37:25that we are just born into in Australia.
- 37:27And so I respect, I respect them for that and it makes me
- 37:31appreciate how lucky I was to to be born into Australia.
- 37:34Yeah, it's it's a pretty awesome place.
- 37:37So we should we should never take it for granted.
- 37:39It's even more awesome when you get into foiling and and all the
- 37:42environments we've got here to do that.
- 37:44But yeah, I mean the luxury to be able to do it.
- 37:46It's not a it's not a cheap sport either.
- 37:48So I think anyone that's out falling sort of pretty fortunate
- 37:52lifestyle. Yeah.
- 37:53And having sure. And having a pretty good life.
- 37:55I think so you're with obviously you did some work with code,
- 37:59you're with Armstrong. And then what, what kind of
- 38:01happened after that in your journey?
- 38:03You didn't, you finished up with Armstrong and and why was that?
- 38:07And then what did you go on to after that?
- 38:09Yeah, yeah. So it was, it was just always
- 38:12contract basis with Armstrong and yeah, look as an expensive
- 38:16resource. So they must have been feeling,
- 38:18feeling bad. But look, I, I learned a lot
- 38:22there. I love the experience and I've
- 38:24got nothing, nothing against them pulling that.
- 38:26And it's just opened new opportunities.
- 38:29So I was, when I got the news that they didn't want to go
- 38:34another year on the contract, I was in Japan with my family at
- 38:38the time and yeah, it, I was still very passionate about
- 38:44foiling and working in design in foiling.
- 38:46So I wanted to keep it going. So I got word I knew I knew
- 38:50exactly what I would do, which was just pick the kind of
- 38:54reinvigorate crisp and and see where that went.
- 38:57And I'm glad I did. It's been, you know, that was at
- 39:01the start of this year. So been 11 months or so and it's
- 39:04been a wild ride. A lot happened in that time and
- 39:07it was it was a solid decision to to keep going.
- 39:11I do some engineering consulting on the side, which kind of
- 39:13butters the bread. It's a hard way to make a living
- 39:16making stabilizers and sending them around the world, but it's
- 39:19most rewarding for sure. Yeah.
- 39:21And obviously, you know, as you said, your family were there,
- 39:24how important families support being in allowing you to to
- 39:27chase this path. It's a little bit different to
- 39:30the typical career path of given your your experience and
- 39:33background. Yeah, I'm very fortunate that my
- 39:36family supports me. I think they understand a little
- 39:40bit how I'm wired up. And I'm sure there's other guys
- 39:43out there who are a bit like this.
- 39:44You know, we need our a water time to be the best person that
- 39:48we can be in life. If we work too much, we tend to
- 39:53be kind of short tempered and not great to be around.
- 39:55So I think Jammer and the kids have always understood that
- 39:59about me, and they've always. Allowed me to prioritize that.
- 40:03So I'm fortunate in that way. And then as far as career wise
- 40:08goes, I spent a long time working really hard and we've
- 40:11we've benefited, benefited from that.
- 40:13So the timing was right for me to take a few risks and pursue
- 40:17something that I was passionate about.
- 40:20And yeah, so I've been supported in that first in going kind of
- 40:25part time and then going, going all in on, on hydrofoil stuff
- 40:30and and even now probably earning a little bit less than
- 40:33what I would. If I was just at a desk working
- 40:36aviation, but I wouldn't change anything.
- 40:38It's it's a bit of a step to go out on your own and do something
- 40:41like that. It's I always tell people it's
- 40:43got higher highs and lower lows. You hang for the higher highs, I
- 40:46think, but there is the lower lows.
- 40:48Either that or it's kind of a can be a bit of a flat line
- 40:50experience if you're kind of getting tired of a traditional
- 40:54career path. But I I think I'd rather have
- 40:56the high highs and lower lows. But depends when you ask me, I
- 40:59think on that one, yeah. And the.
- 41:01Flexibility to not feel, you know, not balance guilt between
- 41:07time at work and time with your family.
- 41:09You know, if there's something going on with the family, then
- 41:11you can be there. Yeah.
- 41:13It's, it's not always you have this living in this state of
- 41:16constant guilt, like I should be working on this.
- 41:18I should be putting in extra hours to get this project done
- 41:21or I missed my kids school assembly or whatever.
- 41:24So working for yourself does give the flexibility that you
- 41:26you can kind of do it all. And if you need to work odd
- 41:30hours and you just do it, it's fine.
- 41:31Yeah. And so when you came back from
- 41:34that trip to Japan and had that thought about really doubling
- 41:37down and and focusing on crisp, where did you go to from there?
- 41:41What would what did you focus on and start producing?
- 41:44Yeah. Well, I think, I think a really
- 41:46an epiphany came while I was in Japan and we we were there and
- 41:51surfing and foiling and snowboarding and touring around.
- 41:54And the feeling of snowboarding in good conditions in powder is
- 41:59just kind of peak human experience for me anyway.
- 42:03I feel like subconsciously we're chasing this gliding feeling the
- 42:08the feeling of, of moving without effort where gravity is
- 42:12not necessarily against us and, and bogging us down all the
- 42:15time. I felt the similarities between
- 42:18foiling and snowboarding. And we got one day where edit
- 42:24they'd groomed the runs overnight and then it was just
- 42:27peaking snow from from when they finished that at 2:00 in the
- 42:30morning until the lifts open. So there was a foot of fresh
- 42:33powder, really light, fresh powder over the top of groomed
- 42:36runs. And it was just the ultimate,
- 42:38you know, speed and glide and then carving.
- 42:40You could just carve as hard as you wanted to and make big
- 42:42clouds. And I thought, OK, this, this is
- 42:45a lot like foiling. I love of this, but this carving
- 42:48sensation, the, the, the combination of glide and
- 42:51carving, that's, that's what I wanted, that's my target.
- 42:54That's what I want to chip away at in foiling.
- 42:56So I've had that epiphany in Japan and then I was actually
- 43:01still in Japan when I thought I need to know what guys are
- 43:05riding, what they're enjoying, and I need to narrow in on how I
- 43:10best can help myself and all these guys experience what I've
- 43:13just experienced here, but in foiling.
- 43:16And so that that's what the survey came that came out in
- 43:19January had a really good response.
- 43:21People all around the world kind of just for nothing other than
- 43:25helping me. I was really grateful and it
- 43:28revealed lots of similarities in what people enjoyed writing and
- 43:33that helped me narrow in on what I need to design to try and
- 43:36deliver this effect for myself and for others.
- 43:39And why, I mean, probably should have asked this earlier, but why
- 43:42focus on stabs? Why not, you know, produce whole
- 43:45foil sets and and what is the role that stab plays that kind
- 43:50of is is important in the in the foil mix?
- 43:52I, I think it's underrated the, the impact that a stabilizer
- 43:56change can have on your setup that I don't know what causes
- 43:59it, but we, we get a lot of pressure on social media and in
- 44:03marketing to change our front foils.
- 44:05I suspect it's because, you know, the process in making a
- 44:09front foil and a stabilizer is pretty similar.
- 44:11I'd probably make a better margin out of the front foils.
- 44:13My time working with, with Armstrong, a lot of the focus is
- 44:18on the front foils. They can't afford to kind of
- 44:20commit at the same amount of time to what goes into a
- 44:24stabilizer. But working for myself, I can.
- 44:26And I think bang for buck, it's the best improvement that you
- 44:30can make to your foil setup is, is changing up your stabilizer.
- 44:34And I see it on the computer when I run the analysis that it
- 44:37does have a measurable impact on the performance of the foil.
- 44:41And I don't think people give that enough credit.
- 44:43Yeah. And you've got, what is it the
- 44:45flex? Is that the the first kind of
- 44:48edition of of the crisp foils that you've produced?
- 44:51Yes, soon soon after I got back from Japan, I'd cut actually
- 44:56I've got it here, give you a look.
- 44:57I'd cut a very high aspect stabilizer from G10 and and not
- 45:05ridden it. And the reason was it came off
- 45:09the machine. It was so thin and so flexy.
- 45:11I just wrote it off. I'm like, oh, that's it's not
- 45:13going to work. And but then I was exploring my
- 45:18thoughts on on how to improve carving and maintain efficiency
- 45:22and, and I thought flex might have something to do with it.
- 45:25So I picked up this old stabilizer like like check this
- 45:28out, like you know. That's flex.
- 45:32It's not meant to be written, just crazy amount of flex.
- 45:34And I was doing some downward laps with some guys here in
- 45:38Perth and just done a run. Conditions were pretty good and
- 45:42I thought there's an opportunity here to test this.
- 45:45I had it in the back of the car so I bolted it on and yeah, my
- 45:48my eyes were opened. I was just carving around and
- 45:51having the best time hooting myself.
- 45:54You know, it was too flexy. It is too flexy.
- 45:56But it's really the moment when I thought there's something to
- 46:00this. And this is, this is the idea
- 46:02that I need to pursue. And so from there I started to
- 46:06think about what is good flex, what is bad flex?
- 46:09And kind of came to the fact that if it flexes from the
- 46:12middle, it's going to feel pretty awful.
- 46:15If it if the Flex is out near the tip, then it does give you
- 46:19that feeling. And I started to do my designs
- 46:22based around that. So yeah, the Flex 130 was the
- 46:25first one to get through my prototyping phase and get
- 46:29released. I prototyped the larger size at
- 46:31the same time that I wasn't super happy with it and had a
- 46:34few goes at that one that's now released as well.
- 46:37And following on, I'm working on something a little bit smaller,
- 46:42which is getting close, but those numbers might sound small
- 46:46to some guys who are used to writing one 8200 area
- 46:50stabilizers. But I think that's a common
- 46:53misconception. I think you can go smaller than
- 46:55you think. And it is probably the easiest
- 47:00upgrade that you can make to set up is to go with a smaller
- 47:04stabilizer and get it tuned in right, whether that's a crisp
- 47:08flicks or any others. Sort of encourage people to
- 47:10downsize this stab and tune it in and embrace that new feeling
- 47:16because it will give you a better ride.
- 47:18Is it it's about the ride when you're up or does it have some
- 47:21impact on, you know, getting up on the foil or which?
- 47:24Where does it? Yeah, you feel it most.
- 47:26I think besides foot pressure and that's where tuning kind of
- 47:31comes in, besides having enough foot pressure, the stabilizer
- 47:34doesn't have a lot of impact on launching or getting up.
- 47:38So that that's relevant for for wingers who, who are launching
- 47:42or power wingers or guys paddling up on bumps or in the
- 47:45flat, the the stabilizer doesn't help so much as long as you've
- 47:50got the right sort of foot pressure where the stabilizers
- 47:53start to have a larger impact. Or I might say then that just
- 47:57carrying smaller volume of stabilizer is gonna enhance
- 48:02those things. Generally, provided you've got
- 48:04enough foot pressure on your front foot, the impact of of the
- 48:07stabilizer is felt more so around the speeds that you
- 48:13operate between your minimum sink speed, your maximum glide
- 48:17speed and your top speed. That that that's where the
- 48:19biggest impact is. Is the flex something that
- 48:22benefits a beginner or intermediate or advanced?
- 48:24Where does it sit? What sort of person should be
- 48:26looking at getting a flex and what ideally would they be using
- 48:30it for? Yeah, it's, it's more for the
- 48:32intermediate and advanced, not the, the beginner couldn't use
- 48:36it. Depending on, on their size,
- 48:38their height and their weight. Typically beginners will run a
- 48:41larger stabilizer because it does have a profound impact on
- 48:44the stability, the pitch stability of, of the setup.
- 48:47But it's kind of like putting a kid who's learning to ride a
- 48:50bike on a dual suspension mountain bike.
- 48:52You know, it'll, it'll work for them.
- 48:53And and though they might grow into it, but they're not going
- 48:56to really feel the benefit of that extra fancy piece of kit
- 49:00until they're at a level where it will deliver benefit for
- 49:04them. Yeah, OK.
- 49:05Yeah. So that the intermediate to
- 49:07advance is people that can really feel what the foil's
- 49:10doing, and then they're trying to tweaking it and trying to
- 49:13make something work better for what they want to do,
- 49:15essentially, Yeah, yeah. I'm in that space of trying to
- 49:19get more out of less. The guys who want that extra
- 49:23little bit of performance, that something different spice up the
- 49:28way that they've arrived. That's the area that I operate
- 49:31in because that's where I'm at and I see a lot of other guys in
- 49:35that space and it really it enhances what is already a very
- 49:39enjoyable sport, just gives you that little bit extra, the
- 49:42cherry on top. In producing these foils, I
- 49:45understand you still manually finish every foil.
- 49:47Why is that important to you? Yeah, I've had mixed results
- 49:52from so I've got. I've got to do some myself and,
- 49:55and I have a relationship with the factory and I've had mixed
- 49:59results of of getting them to to finish the stabilizers and I
- 50:03feel like it's too important to leave it to chance.
- 50:06I also see in the industry, you know, guys, guys will receive
- 50:11tales that that harm will make noise and it's just preventable.
- 50:15So I think it's important enough that I take the time to do that
- 50:20to hand finish each one, the surface finish, a special
- 50:24coating and the trailing edge. And 99% of the time guys are
- 50:28bolted on and they won't have to deal with with that.
- 50:31It'd be pretty disappointing for people to put their brand new
- 50:35stabilizer on and go out and it screams at them and So what?
- 50:38Causes that what why does some some sort of hum whistle and and
- 50:42some are silent? What's the What's the issue?
- 50:45Most of the time it's it's the trailing edge and and the way
- 50:48that it's finished. If let's grab a prop, not sure
- 50:52how well this will come up, but look, we've we've got a high
- 50:57pressure side. I'm going to put this up this
- 50:59way, right? It's a stabilizer.
- 51:00So the foil section is actually upside down.
- 51:02So we've got a high pressure side, which is the flatter side
- 51:05of the stabilizer and a low pressure size, which is the
- 51:08curved side. The, the flow that is being
- 51:12experienced by the, the stabilizer and the rider at the
- 51:16leading edge is uniform and then it, it diverges.
- 51:21So I've got a little video on the Instagram if anyone really
- 51:24wants to know it out on, on the mechanics of how this works.
- 51:27And it's a, it's an analogy with a highway with lots of lanes and
- 51:31the ability forecast to change into those lanes.
- 51:34So on the high pressure side of the foil, there's a bit of a
- 51:37logjam. Everyone's got their brakes on.
- 51:39We've got slower flow on the curved side, the low pressure
- 51:43side of the airfoil, the lanes opening up and and the cars can
- 51:48change into new lanes and accelerate.
- 51:51But what happens when we get to the trailing edge there is that
- 51:55you've got the slow cars trying to merge with the the fast cars.
- 52:00And if anyone who's driven a car and tried to merge under the
- 52:03freeway, for example, they know that that can be problematic and
- 52:07it does tend to have a a greater effect on the flow overall.
- 52:11So tuning the trailing edge really is about allowing the
- 52:16slower flow time to accelerate to make the higher speed flow
- 52:22and reduce any impact that that has.
- 52:25When that's not the case, if we've got a badly finished
- 52:28trailing edge, what we get is wake turbulence.
- 52:31So we'll get some slow moving flow slipping in and disturbing
- 52:35the the fast moving flow and vice versa.
- 52:38And you end up with this oscillation as that vortex
- 52:41switches between sides of the airfoil and that creates a
- 52:45harmonic in the stabilizer itself.
- 52:47And that's what makes the noise and it creates undue drag.
- 52:51Really, we want to get rid of it.
- 52:52Some people talk about leaving their stabilizer noisy because
- 52:55they can hear what speed they're going.
- 52:57Don't do it. Just sort it out properly and
- 53:00you'll you'll end up with the most efficient possible
- 53:03solution. Obviously people are now
- 53:05probably thinking, well, what should I be doing with my
- 53:07stabilizers that are making noise?
- 53:09Probably get a flex. But the old alternative is to is
- 53:12to actually try and do some refining.
- 53:14What sort of grit should people use?
- 53:16And what's the you know, what should they avoid doing or using
- 53:19to fix this problem on their own stabilizers You.
- 53:23Some people would be cautious and they might go straight for
- 53:26like a really fine grit, wet and dry.
- 53:27You're probably not going to get the impact that you want as
- 53:31quickly as you could otherwise. Personally, I finish your
- 53:33trailing edges with 320 grit, something like that, which is
- 53:39aggressive enough that you're actually removing material and
- 53:41not so aggressive that you're going to quickly change the
- 53:44shape of the stabilizer. And look, I brought a prop.
- 53:46We can do a quick down of how we might deal with it.
- 53:50So here's my arts and crafts time.
- 53:54Welcome to play store. So we've got our we've got our
- 53:57airfoil section here. It's upside down because it's a
- 54:00stabilizer. And we just mentioned before
- 54:03that we want to allow the slow flow on the high pressure side
- 54:08time to accelerate to make the fastest flow.
- 54:10So high pressure side, slow flow, low pressure side, fast
- 54:14flow. So we're really attacking this
- 54:17corner here and the way to go about it is with some sandpaper
- 54:21on a block, something firm like a piece of timber.
- 54:24First up, we want to square off the trailing edge here and that
- 54:29resets the stabilizer. Some brands who won't be named
- 54:32here actually finish their trailing edge on what I would
- 54:36consider the wrong side. And we won't go into that.
- 54:38But it you, you can try to restore their trailing edge and
- 54:43you might have some success, but I would recommend resetting the
- 54:46stabilizer with square edge. And then with the sanding block,
- 54:50the first pass will be at 45°. OK, so I'm going to take my
- 54:54sanding block and we got a 45° pass like this.
- 54:58And then we just go about bisecting the angle.
- 55:00So we've got a point here which I'm going to attack and a point
- 55:04up here which I'm going to attack.
- 55:05OK, You see this is starting to approximate curve and we do that
- 55:09over and over, moving backwards and forwards and we end up with
- 55:12something like that. This is a bit exaggerated, of
- 55:15course. I wanted a nice here trailing
- 55:17edge so you could actually see what I was doing.
- 55:18But we've got our slow moving flow here and talking about the
- 55:21highway analogy, having lanes to change into and accelerate.
- 55:25Once I get to this point, there's free lanes for those
- 55:29molecules to change into it, accelerate, and by the time they
- 55:33meet that faster moving flow on the low pressure side of the
- 55:37foil, they're going a little bit faster.
- 55:39And that creates some stability in the vortex that's being shed
- 55:42off the trailing edge and stops that kind of oscillation between
- 55:46the two sides. This can be relevant for a mast
- 55:49as well. It's pretty rare.
- 55:51I had a question yesterday, actually.
- 55:52The guy thinks that his mast's a bit noisy.
- 55:55So I recommended that you square it off and then do this sort of
- 55:59edge just on one side of the mast.
- 56:00I know it's kind of symmetrical and it's got to go both ways,
- 56:03but you still you want to force that shedding to one side to
- 56:07stop oscillation. Arts and crafts done.
- 56:10All right, I like it. There's some good pointers for
- 56:12people to fix up some noisy stabilizers.
- 56:16Another thing I was going to ask you is, you know, we hear a lot
- 56:18about or how to choose your your front wing, but not as much
- 56:23about how to choose your stabilizer size.
- 56:25What are some tips for what sort of size stabilizer people should
- 56:29be kind of looking for? Is there a sort of a, you know,
- 56:32you look at your weight and you know, what factors should you
- 56:36take into account? Wait, wait is definitely a
- 56:38factor. Ability is also a factor.
- 56:41But I think more than anything else, height is probably a big
- 56:45factor. So, you know, it's, it's quite
- 56:47different from an aircraft in the in this sort of way.
- 56:49We've got our hydrofoil and we've got the rioter standing up
- 56:52on top of the board and their center of gravity is a lot
- 56:55higher than what is actually producing the lift and, and
- 56:59where the whole system is pivoting around.
- 57:01And so the taller you are and the higher your scent of gravity
- 57:05is, the more it's going to move around relative to this point
- 57:08down here. So a taller and heavier rider
- 57:12are going to going to want a larger stabilizer just to get a
- 57:16similar stability as what the shorter and lighter riders would
- 57:20enjoy. The other thing to think about I
- 57:23guess is what speed range you're operating in and what discipline
- 57:27you're doing. So downwinding, like it feels
- 57:30amazing, It feels fast, but a lot of the time we're operating
- 57:34in the lower side of the speed range and we want efficiency and
- 57:38we want low drag at low speed. So with a stabilizer, the type
- 57:43of drag that dominates at the lowest speeds is what's called
- 57:46parasitic drag, which is just the bulk of the stabilizer
- 57:51moving through the water, nothing to do with the lift that
- 57:53it's producing. So for the disciplines that
- 57:55operate in the slower end and provided that you've got enough
- 57:59stability to control the thing you want to go as small as
- 58:03possible, There is a tipping point which seems above about 15
- 58:07knots where drag which dominates on the stabilizer is actually
- 58:11what's called induced drag. It's the drag created due to
- 58:15lift. And having a larger stabilizer
- 58:18can mean that you've got lower wing loading on that stabilizer
- 58:23and you can minimize the drag due to induced lift.
- 58:27So if you're seeking out top speeds, if you're a, a winger
- 58:32and you like to zip around on the river, if you're riding in
- 58:35critical surf and, and really hitting those those speeds, so
- 58:4015 knots, then you might want to consider a large stabilizer.
- 58:44There is another factor, which is how aggressively you want to
- 58:47ride, because I'm sure a lot of the guys will have experienced
- 58:51that feeling where you push through your stabilizer and
- 58:53that's just a surface area sort of thing.
- 58:55But I will come back to stability.
- 58:58Generally, the the biggest influences on stability #1 and
- 59:02it's probably your fuselage length number 2 is your
- 59:05stabilizer area. So if you feel like, you know,
- 59:10if you're unstable in pitch, then a larger stabilizer will
- 59:14help you. And then there's a relationship
- 59:16between the front foil area and aspect ratio and and the foil
- 59:22sections that are used in both the front foil and the
- 59:24stabilizer that that should be considered.
- 59:26To boil all that down, I'd say taller riders, large stabilizer,
- 59:31smaller riders, smaller stabilizer, and guys operating
- 59:35at the lower speed range As small as you can get away with.
- 59:38Yeah. OK.
- 59:39And what about, what about shimming?
- 59:41I noticed, I mean, we talked about Armstrong foil.
- 59:43I think we can, we can say when you buy Armstrong foil, they
- 59:46come used to come in a box and all these little Shim pieces.
- 59:49Not everyone does that. But obviously, you know, what
- 59:52does shimming do and what's, what change in feel and, and do
- 59:56people need to Shim or is it something that that they they
- 1:00:01don't have to do or why would you Shim?
- 1:00:03Yeah, I think that's chasing that little bit extra.
- 1:00:06I encourage shimming. I'm a bit of a gear tweaker.
- 1:00:09I can totally respect that. Some guys just want to bolt the
- 1:00:12gear together and ride. And when I design and when these
- 1:00:16major brands design, I'm sure they are setting these angles so
- 1:00:21that you can do that and get away with it.
- 1:00:24But the reason I encourage shimming is because it can have
- 1:00:28a large impact. I can personally feel the
- 1:00:30difference of about 1/4 of a degree tail Shim and if I'm
- 1:00:36looking to make some adjustments, I will Shim between
- 1:00:40that half a degree and and 1°. When it comes to shimming,
- 1:00:44there's kind of two impacts. The one that needs to be
- 1:00:47resolved first is probably foot pressure.
- 1:00:49So that is about how much the board is pushing back against
- 1:00:53you and what foot it's pushing against and that changes over
- 1:00:57the speed range. So like some guys will
- 1:00:59experience a speed in which the pitch stability goes all crazy.
- 1:01:04That is the speed at which their foot pressure is changing from
- 1:01:09their front to their rear foot. And and that sensation,
- 1:01:12particularly right at the wrong time when you're bombing down a
- 1:01:14wave or something is quite unsettling.
- 1:01:16So in that situation, I would recommend that they Shim to
- 1:01:21resolve their foot pressure. And usually what that means is
- 1:01:25shimming the leading edge down on the stabilizer to provide
- 1:01:29more front foot pressure so that it doesn't switch from front to
- 1:01:33rear in those situations. The other reason that you would
- 1:01:37Shim is to make the most of the speed range of the stabilizer to
- 1:01:43adjust your performance, the efficiency you've just set up to
- 1:01:47match the speed that you're riding at.
- 1:01:49So the basic philosophy there really is a flatter stabilizer
- 1:01:54will open up more high end speed and a more angled stabilizer
- 1:01:59will unlock a little bit of minimum glide speed and the
- 1:02:03lower end. The other thing I'll say with
- 1:02:05respect to that is mass placement also has an impact on
- 1:02:10on foot pressure. So when you Shim, if you're, if
- 1:02:15you're flattening off your stabilizer, you might want to
- 1:02:17consider nudging your mast forward a little bit if you're
- 1:02:20shimming to try and get more performance based on speed and
- 1:02:25flattening that stabilizer shift the mast forward a little bit
- 1:02:28and and vice versa. So there's a relationship there
- 1:02:31as well. So dialing in your mast position
- 1:02:33is important, and shimming your stabilizer is important too.
- 1:02:36Yeah, I mean, we had a well, I think you were there as well at
- 1:02:39talk that around Armstrong and Oscar was saying he's doing a
- 1:02:43downwinder off of Perth and WA here and and he shamed because
- 1:02:49he was trying not to catch up to the next wave too, too fast.
- 1:02:51So he was shimming to slow down to catch the wind waves that we
- 1:02:54had here. So I can see that application
- 1:02:58for sure as and as you describe it, you know, it depends how
- 1:03:01fast everything's going out there.
- 1:03:03If you're running too fast, you just run into the back of the
- 1:03:05next wave basically. And look, there's not a number
- 1:03:08that we can provide. Everyone's foil setups are
- 1:03:11different and the manufacturers set the the angle of the front
- 1:03:15foil differently across ranges and between brands as well.
- 1:03:19When it comes to wanting the ability to surf like Oscar was
- 1:03:22describing and and really prioritize slow speed
- 1:03:26performance and carving, what's important there is what's called
- 1:03:29the decolage. It's the difference in angle
- 1:03:31between the front foil and the stabilizer, and some guys enjoy
- 1:03:36the kind of the bank and yank style turning like a fighter jet
- 1:03:40and having a higher deck collage.
- 1:03:43More of an angle difference between the front and the rear
- 1:03:46can help with that. Talking about different brands,
- 1:03:48your your flex stabilizers, obviously people are going to be
- 1:03:50putting them on with the brands of front wings.
- 1:03:53What's the compatibility between your stabilizers and and some of
- 1:03:57the other products out there? Yeah, it's always a challenge.
- 1:04:00I want to make them available to as many people as as possible.
- 1:04:04And all the brands are different, or most of them
- 1:04:06anyway. Some some brands are quite
- 1:04:08consistent and they use the flat bottom mount with 30 mil screw
- 1:04:14spacing and those are easy to hit.
- 1:04:16Armstrong's in a field of its own.
- 1:04:18No one else has the threads in the stabilizer and probably for
- 1:04:21good reason. But as far as the compatibility
- 1:04:24that I can offer now can cover Armstrong Unifoil AFSF 1 lift
- 1:04:32foils with a tail adapter access.
- 1:04:34I've just done some protos for North actually so I'm not sure
- 1:04:38whether I'll go into production or not, but if if there's any N
- 1:04:41writers who are keen get in touch it'll tip me over.
- 1:04:44Yeah. Then the other thing I've been
- 1:04:46trying to do really is for my own sake, not having to make so
- 1:04:51many different models of stabilizers is offered inter
- 1:04:55compatibility between brands. So as far as an interface goes,
- 1:05:00I think my favorite is probably Unifoil for no other reason that
- 1:05:05it's it's very adaptable. They've got a flat bottom mount
- 1:05:08interface with 30 mil screw spacing which is the same as as
- 1:05:12many other brands. So for the sake of a small 3D
- 1:05:16printed adapter, which I can do in engineering plastics nice and
- 1:05:21stiff, I can make a Unifoil stab fit on code foils, AFS and other
- 1:05:26the generic bottom mount brands and KT as well.
- 1:05:30So often when I get customers who are ordering for those
- 1:05:35brands, I'll send them a bunch of adapters and say, have these
- 1:05:39in case you ever change brands, maybe the stabilizer won't have
- 1:05:42to be moved on and you can share with your friends as well.
- 1:05:45So yeah, I'm, I'm always looking for ways of making into
- 1:05:50compatibility for the benefit of everybody, including myself.
- 1:05:53Oh, that makes sense. Just to take a little bit of a
- 1:05:56different tack, obviously I've noticed you're wearing a great
- 1:05:59Southern Foil Fest T-shirt. Yeah, that was was wasn't that
- 1:06:04long ago, but it was the first event in WA of of that type.
- 1:06:08What was that experience like? And I understand you had a crisp
- 1:06:12flex 130 prize and Kurt Mumford on that.
- 1:06:16Talk us through that event and and how that related to Chris.
- 1:06:20Foils yeah, I it was, it was great fun.
- 1:06:23I think what I love most about it really is it just embodies
- 1:06:26everything that is the foiling community in WA and I think we
- 1:06:30have a good one here. So it was just organized, you
- 1:06:33know, one guy, Marty from Denmark, threw out the idea and
- 1:06:37everyone jumped on it and said that's great, let's do this.
- 1:06:40So he, he did the bulk of the work, but we had contributions
- 1:06:44from lots of different guys who had some something to offer.
- 1:06:48In my case, I wanted to offer a stabilizer as a prize and I made
- 1:06:55some little giveaways, which is a talks tool saver so you can
- 1:06:59clip it on your talks tool and tie it to your PFD or your board
- 1:07:03shorts and not lose it in the water.
- 1:07:05So I was giving giving those away.
- 1:07:07But as far as an event goes organized just enough that
- 1:07:10everyone had fun without all the red tape and and stuff that
- 1:07:13comes along with that. We got amazing conditions for
- 1:07:16the prone foil comp, like you couldn't have asked for better.
- 1:07:20We got a bit of a wing and a downwind event going the next
- 1:07:24day and then we all had dinner together and watch some movies.
- 1:07:27It was it was a really good weekend and look, we're in the
- 1:07:31honeymoon phase for foiling and everyone's getting along so well
- 1:07:35and I've got to make the most of that.
- 1:07:37All power to Marty and everyone else who contributed in that
- 1:07:41event. I hope to see more.
- 1:07:42It was great. Regarding the prize, it's just
- 1:07:45what I wanted to offer to support the event and they was
- 1:07:49given the opportunity just to pick out what someone that that
- 1:07:53I thought was deserving of the Flex 130 stabilizer.
- 1:07:57Kurt Mumford, he's from Esperance, he's he's a young
- 1:08:00kid. I think he's in year 11, about
- 1:08:02to go into year 12 now, but he was really a standout boiler and
- 1:08:07he was running a stabilizer that he chopped down to be more
- 1:08:11appropriate for his size and weight.
- 1:08:14And it was the same with the other young guys down there who
- 1:08:17all ripped by the way. It was, it was difficult
- 1:08:19decision, but what I saw was an opportunity really to design
- 1:08:24something for him. And we're going to see, we're
- 1:08:27going to see more of that. We've got all the dads in the
- 1:08:29foiling now and they've got the hand me down gear and the
- 1:08:32teenage boys, boys and girls are coming through and picking that
- 1:08:37gear. Up and they are just.
- 1:08:38Ripping, like it's scary how quickly teenagers and kids can
- 1:08:43pick up things. So I just wanted to have some
- 1:08:47fun with that. So I've made a prototype and
- 1:08:49that's with Kurt at the moment and we're getting some feedback.
- 1:08:52I've written it as well and I think there's some promise
- 1:08:55there. But hopefully I've got a a model
- 1:08:58of flex stab that is appropriate for lightweights and that's,
- 1:09:04that's what I get out of this. And and he gets to be involved
- 1:09:07in the process, which I think he's he's enjoying and he's got
- 1:09:09a flex 1:30 at the moment that he's writing from time to time.
- 1:09:13Yeah, that's how that came about.
- 1:09:14Cool. And and talking about
- 1:09:16prototypes, one of the other things I was going to ask about
- 1:09:18was you've got a collaboration with Treehouse Surfboards making
- 1:09:22it a Downwinden board. It's a bit different to what's
- 1:09:25already on the market. Can you talk through what what's
- 1:09:28happening there and what your approach is with that one?
- 1:09:30Yes. Tree House, as I mentioned
- 1:09:32before, is, is my brother and his surfboard label.
- 1:09:34So right, this was his first, his first foil board.
- 1:09:38And yeah, it's, it's behind me here.
- 1:09:41It's certainly not for everyone. And whether it goes anywhere,
- 1:09:44I'm not sure. But it, it was a, it was a bit
- 1:09:46of a spark of an, of an idea and an opportunity that I, I wanted
- 1:09:50to see through. So my brother Dave is very
- 1:09:54talented surfboard designer and builder and I had a few ideas of
- 1:09:59my own and we got together and collaborated on this design.
- 1:10:02The concept really was that I love downwinding, but I love
- 1:10:07surfing downwind as opposed to going as fast as you can in a
- 1:10:11straight line. I I want to carve turns.
- 1:10:14I want, I want to, I want to ride waves when there are no
- 1:10:16waves, which is her summer. So I wanted it short.
- 1:10:21I wanted it as little volume as I could get away with and I
- 1:10:24wanted to put foot straps on it. And being short and low volume
- 1:10:28meant that it still had to move efficiently through the water or
- 1:10:32I was never going to launch this thing.
- 1:10:33So we put it, we put a few smarts in that.
- 1:10:37I drew inspiration from some sections that that I've been
- 1:10:41looking at for what I might use in a mast.
- 1:10:44Because it's so short, you don't have the opportunity to have big
- 1:10:47drawn out lines and make it streamlined.
- 1:10:49You might say you've got to have the section of it flowing
- 1:10:52through the water, which is inherently efficient.
- 1:10:54And in playing around with that a little bit, I could see that
- 1:10:58it's actually the exit point of the water, which is a lot more
- 1:11:02important than the entry, particularly for the style of
- 1:11:05paddle up that we do downwind, which is kind of slapping the
- 1:11:08nose on the water and bouncing the front of the board off.
- 1:11:11So that's what we did. It's got a very narrow tail.
- 1:11:14The benefits of that really are I haven't had any rail touches
- 1:11:19in surfing this thing that that I would get on a conventional
- 1:11:22board, which has made it fun for downwind and for winging as
- 1:11:25well. Just one less thing to worry
- 1:11:27about. And when I'm up, I also push the
- 1:11:31buoyancy as far forward as I could, push the foil tracks as
- 1:11:34fast far forward as I could. And that means that there's very
- 1:11:37little board in front of me when I'm writing.
- 1:11:40So it kind of gives you that sensation of prime foiling.
- 1:11:44After the first time I wrote it, I described it to my mate Peter.
- 1:11:47I said it's like I was falling off the edge of a Cliff.
- 1:11:49There's just nothing in front of you.
- 1:11:50It's very liberating to downwind with, with something like that
- 1:11:54and probably something only the guys like like Rady or the the
- 1:11:57prone downwinders have experienced before and that's a
- 1:12:00good feeling. I love it.
- 1:12:01Yeah, I mean, it's a good point. You make a lot of the the
- 1:12:04downwinding stuffs really for kind of racing along less
- 1:12:07focused on kind of, yeah, as you say, surfing the swell.
- 1:12:10And one of the great things is you're you're out.
- 1:12:13I mean, you don't always get great waves.
- 1:12:14And if you do get great waves, there's often a crowd on it.
- 1:12:17So to be able to to surf some of those swells.
- 1:12:19Yeah, it's, it's, it's the ultimate freedom.
- 1:12:21It's fantastic. Fantastic.
- 1:12:22So yeah, that sounds pretty interesting.
- 1:12:24Bit different. It'll never, it'll never get too
- 1:12:27crowded or downwinding in the ocean.
- 1:12:28And and the more the merrier, really.
- 1:12:30We, we have a blast. It's yeah, it's it's worth the
- 1:12:34effort for anyone who's thinking about landings, downwinds,
- 1:12:37whether it's with a paddle or a paraling, whatever.
- 1:12:39I I encourage it. It's it's kind of like the next
- 1:12:42level. It's the pinnacle of foiling.
- 1:12:44Dragon, it's the fastest growing area.
- 1:12:46I suppose it depends on where you are.
- 1:12:48I mean, obviously in Europe the lakes are probably not doing so
- 1:12:51much down. But overall, generally, do you
- 1:12:54reckon it's one of the fastest growing areas or do you think
- 1:12:57there's other areas that are going to be growing quicker at
- 1:13:01the moment? It's hard to judge in Perth.
- 1:13:04It's pretty popular. You know, seeing it go from when
- 1:13:07I first decided that I'd learn and I was out struggling on my
- 1:13:10own, reached out on Facebook of all places and and linked up
- 1:13:14with Shane who are still downwinded with now.
- 1:13:17And we didn't really have anyone else to to learn with their a
- 1:13:21core crew of of Marcus and these guys who were just on another
- 1:13:24level. We didn't really want to slow
- 1:13:25them down. Now the chat group that was made
- 1:13:28early on with that kind of growing group of foilers is I
- 1:13:32think there's 130 people in it now.
- 1:13:34You can go any day of the week and you can find somebody to
- 1:13:38link up with for the car shuffle, which is always kind of
- 1:13:41bit of an annoyance, but also a really fun part of downwinding.
- 1:13:44But and the other point I'll make I guess is downwinders.
- 1:13:48It's it's hard to learn. So it's probably over
- 1:13:50represented in forums and online and YouTube content and all of
- 1:13:55that because it's what guys are seeking.
- 1:13:57They want. They want to find the tips and
- 1:14:00give themselves the advantage. So maybe over represented in
- 1:14:05online space. I don't think it's going to be
- 1:14:08the biggest discipline in foiling.
- 1:14:10It's it's hard to do. It's it is very rewarding it,
- 1:14:12but it's hard to do. And every time I go down to the
- 1:14:16river, I'm just impressed with the number of wind foilers there
- 1:14:20are to be honest. I think that's always has been
- 1:14:22and will continue to be the biggest growth area in the
- 1:14:25sport. Yeah, it's a good starting point
- 1:14:26for many people. I know plenty, plenty of surfers
- 1:14:30go from berthing to maybe dock starting or downwinding.
- 1:14:34And that's, that's a pretty steep learning curve.
- 1:14:36Obviously they've got the riding the waves bit done, but the foil
- 1:14:39bit not so much. But yeah, and the wing falling
- 1:14:42is probably the the easiest first stepping stone I'd say
- 1:14:45into falling, in my experience anyway.
- 1:14:48Yeah, when people ask me, I I say if you've got a friend with
- 1:14:51a boat, then then borrow some gear, some learner oriented gear
- 1:14:55and get behind the boat. If you don't have that, grab a
- 1:14:57wing because it's, I guess rather than going in the surf
- 1:15:01and, and even different to going behind a boat, you, you're in
- 1:15:04control of the power. If you're not feeling
- 1:15:06comfortable with the direction that you're going, you just drop
- 1:15:09the wing and everything stops. And it is a great way to, to
- 1:15:13learn. And yeah, I encourage, I
- 1:15:15encourage starting with winging for sure.
- 1:15:17On that note, I think we'll do some quick fire questions.
- 1:15:19Doesn't mean you always have to do a quick fire answer, but
- 1:15:23let's kick off with the first one.
- 1:15:25If you could foil anywhere in the world tomorrow, where would
- 1:15:28it be and why? I'd.
- 1:15:29Probably say Peru, those breaks at Apakos, Mayo and Shikama,
- 1:15:36they look really amazing and it's really hard to get to.
- 1:15:39So if I could magic myself to Peru without 30 hours plus of
- 1:15:44travelling, then that'd that'd be where I'd get tomorrow.
- 1:15:47Yeah, and what's the most underrated skill a foil rider
- 1:15:50should? Practice, I'd say mast height
- 1:15:53control. And the reason I say that is
- 1:15:57that the dynamics of the foil and the efficiency that you can
- 1:16:00tap into when you're high in the water column, phenomenal.
- 1:16:05And when you watch rioters like Oscar and Kane to Wilde, you can
- 1:16:09see that that's possibly their biggest advantage is their their
- 1:16:14ability to maintain that foil just under the surface of the
- 1:16:18water and get the efficiency gained comes with that.
- 1:16:22I might expand on that a little bit and just say also knowing
- 1:16:25when you need to get that depth because no one wants to turn and
- 1:16:30and do a flat breach with head masks almost all the way out of
- 1:16:34the water. Yeah, what's the most rewarding
- 1:16:36thing about foiling for you? I'd have to say like the the
- 1:16:39physical and emotional benefits of connecting with like minded
- 1:16:45people and staying physically fit.
- 1:16:47Yeah, that's that's been kind of life changing.
- 1:16:51I got into this possibly on the verge of a midlife crisis.
- 1:16:54So I was doing silly things like trying to learn to loop my
- 1:16:59windsurfer, which had mixed results.
- 1:17:02And I feel like this is a much more sensible pursuit, you know,
- 1:17:07physically and mentally for someone of my.
- 1:17:08Age I always I go on and about it a bit, but I think it's it's
- 1:17:12so amazing. I mean physical health given,
- 1:17:14but I think it's so amazing for mental health in terms of that
- 1:17:17community that's that's out there.
- 1:17:19It's a great community and people are so can be so
- 1:17:22disconnected in their working lives these days to some degree,
- 1:17:25you know, doing their own thing, working from home, etcetera.
- 1:17:28And then you, you get together and no matter what day, it's
- 1:17:31like you're hanging out with people that have got this
- 1:17:33passion for what you've got a passion for.
- 1:17:35It's, it's pretty great for, yeah, just for the whole, whole
- 1:17:38mental well-being, I think. I'd add to that, I might add to
- 1:17:40that and and that is learning something new.
- 1:17:44Yeah, you know, late, later in life you might say, or just
- 1:17:47learning something new. Generally.
- 1:17:48I think it's really good for you and foiling offers lots of
- 1:17:52learning opportunities. The initial feeling of learning
- 1:17:56to handle this foil and then all the different disciplines that
- 1:17:58you can get into. So that's got a that's got a
- 1:18:01huge benefits. How would you describe foiling
- 1:18:03in one word for you addiction? What's the best advice you've
- 1:18:09ever received about foiling? That's a tricky one.
- 1:18:13I've got lots of good advice, but the the one that that echoes
- 1:18:16in my head and whether he thought it would be a profound
- 1:18:19bit of advice at the time or not, I'm not sure.
- 1:18:22But Marcus once told me that you can foil a lot slower than you
- 1:18:27think you can for downwinding or for learning maneuvers, winging
- 1:18:32or even in the surf. That that comes back to me at
- 1:18:35the moment and is important. And it's true.
- 1:18:38You can foil a lot slower than you think you can.
- 1:18:41Trust the glide, trust your gear and explore that limit because
- 1:18:46you just relax more. You know, you don't panic pump
- 1:18:50and get stressed. I'm going slow.
- 1:18:51I'm going slow. I've got it got to speed up,
- 1:18:53I've got to pump my wing. That was great advice, Marcus.
- 1:18:56Thanks mate. What's the next big foiling
- 1:18:58adventure or challenge on your horizon?
- 1:19:00Yeah. Look, I don't have anything big
- 1:19:02planned, but I'd love to rediscover the coastlines with
- 1:19:06foiling glasses on. So just traveling locally and
- 1:19:11revisiting these spots that that are rode off as bad surfing
- 1:19:15locations might actually be really good locations.
- 1:19:18Finding new little corners to do downwinds.
- 1:19:22That's adventure enough for me. Yeah.
- 1:19:24And and just lastly, outside of those questions now sort of
- 1:19:29where can people find out more about crisp foils?
- 1:19:32And I also understand that you offer demos of your stabilizers.
- 1:19:36So, you know, how does that whole process work?
- 1:19:39Where can I get some more information?
- 1:19:41Yeah, sure. Happy for anyone to reach out
- 1:19:43and get in touch with me. The best way is to get me on
- 1:19:46Instagram crisp under score OG or on Facebook crisp foils.
- 1:19:52I've got a pretty average website up crispfoils.com so you
- 1:19:57can have a look at there but don't judge me for that.
- 1:20:00And sorry, what was the other part of the question?
- 1:20:02Yeah, just where they could get where they could get involved
- 1:20:05with trying out some demos, yeah.
- 1:20:08Yeah, sure. So I've usually got demos in my
- 1:20:11car for the the locals just just ask and look.
- 1:20:16Honestly, there's there's no pressure.
- 1:20:18I'd be happy with the feedback. You don't have to buy one, but
- 1:20:21please give it a go. I also made a decision not to
- 1:20:25put any money into advertising recently.
- 1:20:28I see that it's a bit over saturated and there's a lot of
- 1:20:32pressure from advertisers that you need this and you need that
- 1:20:36and it's just not true. Guys can have a lot of fun on
- 1:20:39the gear that they've got and so instead of spending any money on
- 1:20:42advertising, trying to grow Crisp, I just want to continue
- 1:20:45to do it organically. And the best way that I could
- 1:20:47see to do that was to offer demos within Australia.
- 1:20:52People can book on my website, crispfalls.com and I'll post out
- 1:20:56the demo. There's a small charge just to
- 1:20:58cover the shipping, but if you then want to go ahead and
- 1:21:00purchase this a stabilizer, whether you want to purchase the
- 1:21:04one that you've got or you want a fresh new one, I'll discount
- 1:21:07the price based on what you've spent to to try the demo.
- 1:21:11But I do encourage people to jump on there, book a demo, send
- 1:21:15it over to the East Coast. You can have it for a few days.
- 1:21:18You can negotiate longer if you need to share it with your
- 1:21:21friends. And again, I'd love the feedback
- 1:21:24and maybe you'll love it too. Yeah, cheers.
- 1:21:27Well, thank you so much for being on the Foilers podcast.
- 1:21:30Really appreciate it. And yeah, I'm sure it's opened a
- 1:21:33lot of people's eyes on, you know, thinking about their
- 1:21:34stabilizers. And, you know, I'm sure people
- 1:21:37will be keen to give yours a bit of a demo and see see what it
- 1:21:40feels like. So yeah, thanks.
- 1:21:42Thanks a lot for being on the on the podcast, Chris.
- 1:21:44Appreciate it. Thanks for having me, Peter.
- 1:21:46And you're included in that offer to demo.
- 1:21:48Please hit me up. I know you're back on the water
- 1:21:50now. Yeah.
- 1:21:52And I'm just going to say I appreciate that you're you're
- 1:21:54running this, this podcast in a truly impartial way.
- 1:21:57You, you cover all the different brands and all the different
- 1:22:00aspects of oiling. So keep doing what you're doing.
- 1:22:03Appreciate it. Thank you.